Sorption Catalytic Determination of Copper(II) and L-α-alanine on Mg-, Al-Layered Double Hydroxides

Mg-, Al and Mg-, Cu-, Al-layered double hydroxides well-known synthetic hydrotalcite-like sorbents, were used for the first time as carriers for indicators in the sorption catalytic determination of copper(II) and L-α-alanine. Mg-, Al and Mg-, Cu-, Al-layered double hydroxides were synthesized by coprecipitation and characterized using infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The adsorption of 0.50?mg?L^?1 copper(II) solution by Mg-, Al-layered double hydroxides followed a pseudo-second-order model with an equilibrium sorption capacity of 24.2?×?10^?3?mg?g^?1 (3.8?×?10^?4?mmol g^?1) and a reaction rate constant of 4.2?g mg^?1?min^?1. Mg-, Al-layered double hydroxide tablets were prepared and used for sorption concentration and subsequent sensitive and selective sorption catalytic determination of 5.5?×?10^?3 to 1.0?mg?L^?1 copper(II) at the sorbent phase. The method was used for the analysis of natural water. A method was developed for the determination of α-alanine in Mg-, Cu-, Al-layered double hydroxide tablets with a limit of detection of 4.0?×?10^?3 mol?L^?1. In addition, thin layers of Mg-, Cu-, Al-layered double hydroxide were used to separate α-alanine and determine α-amino acids by thin-layer chromatography.     

Investigation of the Removal of Lead by Adsorption onto 1‐(2‐Thiazolylazo)‐2‐Naphthol (TAN) Imbedded Polyurethane Foam from Aqueous Solution

A new preconcentration method is presented for lead on TAN‐loaded polyurethane foam (PUF) and its measurement by differential pulse anodic stripping voltammetry (DPASV). The optimum sorption conditions of 1.29 × 10^?5 M solution of Pb(II) ions on TAN‐loaded PUF were investigated. The maximum sorption was observed at pH 7 with 20 minutes equilibrated time on 7.25 mg mL^?1 of TAN‐loaded foam. The kinetic study indicates that the overall sorption process was controlled by the intra‐particle diffusion process. The validity of Freundlich, Langmuir and Dubinin ‐ Radushkevich adsorption isotherms were tested. The Freundlich constants 1/n and K_F are evaluated to be 0.45 ±0.04 and (1.03 +0.61) × 10^?3 mol g^?1, respectively. The monolayer sorption capacity and adsorption constant related to the Langmuir isotherm are (1.38 ± 0.08) × 10^?5 mol g^?1 and (1.46 ± 0.27) × 10⁵ L mol^?1, respectively. The mean free energy of Pb(II) ions sorption on‐TAN loaded PUF is 11.04 ± 0.28 kJ mol^?1 indicating chemisorption phenomena. The effect of temperature on the sorption yields thermodynamics parameters of ΔH, ΔS and ΔG at 298 K that are 15.0 ± 1.4 kJ mol^?1, 74 ±5 J mol^?1 K^?1 and ‐7.37 ± 0.28 kJ mol^?1, respectively. The positive values of enthalpy (ΔH) and entropy (ΔS) indicate the endothermic sorption and stability of the sorbed complexes are entropy driven. However, the negative value of Gibb's free energy (ΔG) indicates the spontaneous nature of sorption. On the basis of these data, the sorption mechanism has been postulated. The effect of different foreign ions on the sorption and desorption studies were also carried out. The method was successfully applied for the determination of lead from different water samples at ng levels.     

Comparative study on retardation behavior of Cs in crushed and intact rocks: two potential repository host rocks in the Taiwan area

This study investigates sorption and diffusion of Cs in two potential host rocks (granite from Kinmen Island and basalt from Penghu Island) by using batch and through-diffusion methods in order to establish a reliable safety assessment methodology. These methods were applied to crushed and intact rock samples to investigate the actual geological environment. According to solid-phase analysis, including X-ray diffraction, elemental analysis, auto radiography, and polar microscopy, the sorption component primarily contained iron?Cmagnesium (Fe?CMg) minerals in basalt and granite. Moreover, the distribution coefficient (K _d) of Cs in various concentrations (~10^?2?C10^?7?M) obtained from batch tests indicated a higher sorption capacity in basalt than that in granite because of the 10% Fe?CMg mineral content. The diffusion of Cs in both crushed granite and basalt reached steady state after 110?days, and the apparent diffusion coefficients (D _a) were 2.86?×?10^?11 and 1.82?×?10^?12?m²/s, respectively. However, the value of D _a for Cs in intact rocks was estimated to be 1.45?×?10^?12?m²/s in granite and 0.56?×?10^?12?m²/s in basalt, lower than the values obtained using crushed rocks. In addition to the microporous structure (major sorption minerals), it showed that the major retardation of Cs depended on the porosity (??) of compacted media, according to through-diffusion tests. In fact, the solid/liquid (S/L) ratio decreased as is the case when switching from batch to column experiments and the sorption effect on minerals became even more negligible in retardation of radionuclide migration.     

Effects of pH and Concentration on Cs Ions Sorption and Diffusion in Crushed Granite by Using Batch and Modified Capillary Method

A comprehensive evaluation of Cs ions sorption to and diffusion in crushed granite was conducted in this study. The sorption capacity of crushed granite suggested by the Langmuir model was 5.48 × 10^?6 mol‐Cs/g‐granite. The distribution coefficient (Kd) was around 7.5 mL/g and pH independent. By using an in‐diffusion method with a modified capillary column, some diffusion relevant parameters of Cs ions in crushed granite were derived. The apparent diffusion coefficient (Da) seemed unaffected by Cs concentration (1.15 × 10^?10 to 2.82 × 10^?10 m²/s, at 10^?7 and 10^?3 M, respectively). The determined effective diffusion coefficients (De) were located in the window from 8.59 × 10^?10 (10^?7 M) to 1.69 × 10^?9 (10^?3 M) m²/s. Under various pH environments, pH independent Da (9.0 × 10^?9 m²/s) and De (1.0 × 10^?9 m²/s) values were observed. Under current systems, consistently higher De than Da implied the diffusion of Cs ions was governed by surface diffusion phenomenon. Whereas the pH insensitive feature indicated the Cs sorption to crushed granite was mainly through ion‐exchange reaction. Moreover, further SEM/EDS mapping clearly showed the adsorbed Cs ions were highly concentrated on the fracture surface of biotite.     

Neodymium sorption by clay minerals and zeoliferous rocks

The sorption of neodymium from its aqueous solutions (concentration range approx. 10–450 mg l^–1) by montmorillonite, kaolinite and a clinoptilolite-containing rock has been investigated, using¹⁴⁷Nd as radioactive tracer and -ray spectrometry. The neodymium uptake by montmorillonite was found to be much higher than of the other two materials in the whole investigated concentration range. However, in the case of montmorillonite and zeoliferous rock, the uptake ability is lower than that allowed by the measured CEC values and can be described by Langmuir-type equations. In the case of kaolinite, the observed higher than CEC-allowed uptake values could be attributed to sorption by mechanisms other than ion-exchange. The corresponding data obey a Freundlich-type sorption equation. Among the three geological materials investigated, montmorillonite exhibits the highest perspectives of application for the treatment and disposal of neodymium and trivalent actinides in nuclear industry.     

Thermodynamic and kinetic investigations of uranium adsorption on soil

In order to understand the mobility of uranium it is very important to know about its sorption kinetics and the thermodynamics behind the sorption process on soil. In the present study the sorption kinetics of uranium was studied in soil and the influence parameters to the sorption process, such as initial uranium concentration, pH, contact time and temperature were investigated. Distribution coefficient of uranium on soil was measured by laboratory batch method. Experimental isotherms evaluated from the distribution coefficients were fit to Langmuir, Freundlich and Dubinin?CRadushkevich (D?CR) models. The sorption energy for uranium from the D?CR adsorption isotherm was calculated to be 7.07?kJ?mol^?1.The values of ??H and ??S were calculated to be 37.33?kJ?mol^?1 and 162?J?K^?1?mol^?1, respectively. ??G at 30?°C was estimated to be ?11.76?kJ?mol^?1. From sorption kinetics of uranium the reaction rate was calculated to be 1.6?×?10^?3?min^?1.     

Removal of Zn(II) Ions from Aqueous Solution Using BPHA‐Impregnated Polyurethane Foam

Zn(II) ions sorption onto N‐Benzoyl‐N‐Phenylhydroxylamine (BPHA) impregnated polyurethane foam (PUF) has been studied extensively using radiotracer and batch techniques. Maximum sorption (～98%) of Zn(II) ions (8.9 × 10^?6 M) onto sorbent surface is achieved from a buffer of pH 8 solution in 30 minutes using 7.5 mg/mL of BPHA‐impregnated polyurethane foam at 283 K. The sorption data follow Langmuir, Freundlich and Dubinin‐Radushkevich (D‐R) isotherms. The Langmuir constants Q = 18.01 ± 0.38 μ mole g^?1 and b = (5.39 ± 0.98) × 10³ L mole^?1 have been computed. Freundlich constants 1/n = 0.29 ± 0.01 and C_m = 111.22 ± 12.3 μ mole g^?1 have been estimated. Sorption capacity 31.42 ± 1.62 μ mole g^?1, β = ?0.00269 ± 0.00012 kJ² mole^?2 and energy 13.34 ± 0.03 kJ mole^?1 have been evaluated using D‐R isotherm. The variation of sorption with temperature yields ΔH = ?77.7 ± 2.8 k J mole^?1, ΔS = ?237.7 ± 9.3 J mole^?1 K^?1 and ΔG = ?661.8 ± 117.5 k J mol^?1 at 298 K reflecting the exothermic and spontaneous nature of sorption. Cations like Fe(III), Ce(III), Al(III), Pb(II) and Hg(II) and anions, i.e., oxalate, EDTA and tartrate, reduce the sorption significantly, while iodide and thiocyanate enhanced the sorption of Zn(II) ions onto BPHA‐impregnated polyurethane foam.     

Lithium chloride sorption by zinc hexacyanoferrate(II) from a nonaqueous medium

Mechanisms of lithium chloride sorption by zinc hexacyanoferrate(II) Zn₂Fe(CN)₆ · 2.5H₂O in a nonaqueous medium (ethanol) were studied by chemical analysis, X-ray powder diffraction, wide-line ⁷Li and ¹H NMR, vibrational spectroscopy, and impedance spectroscopy. The physicochemical properties of sorption products are reported. Lithium ions in the sorption products were found to be in a hydrated form. The accommodation of molecularly sorbed Li⁺ aq · Cl^? ion pairs in the bores of channels in the crystal structure results in the formation of a continuous network of hydrogen bonds and changes the proton transport mechanism. As the lithium chloride concentration increases in the temperature range 22–150°C, the conductivity (σ) of sorption products increases three to four orders of magnitude to reach 10^?3 S cm^?1.     

Simulation of a 2-site Langmuir model for characterizing the sorption capacity of Cs and Se in crushed mudrock under various ionic strength effects

The sorption capacity of cesium (Cs) and selenium (Se) in crushed mudrock was demonstrated in this study through a 2-site Langmuir model. To employ such a numerical analysis, batch tests were applied in this study in synthetic seawater and groundwater with sorption/desorption kinetic experiments (time-dependent) and different concentrations (10^?2–10^?7 M). The 2-site sorption models, which correspond to two rate constants (λ ₁ and λ ₂), might be more adequate than 1-site sorption models in characterizing Cs and Se sorption/desorption according to the least square errors between the numerical analysis and the results of the batch tests. The fitting results showed that a 2-site Langmuir model is capable of appropriately describing Cs and Se sorption in mudrock. Consequently, the sorption capacity was calculated at about 0.06 mol/kg for Cs and at 0.015 mol/kg for Se.     

Controlled Preparation and Reactive Silver‐Ion Sorption of Electrically Conductive Poly(N‐butylaniline)–Lignosulfonate Composite Nanospheres

Electroconductive poly(N‐butylaniline)–lignosulfonate (PBA–LS) composite nanospheres were prepared in a facile way by in situ, unstirred polymerization of N‐butylaniline with lignosulfonate (LS) as a dispersant and dopant. The LS content was used to optimize the size, structure, electroconductivity, solubility, and silver ion adsorptive capacity of the PBA–LS nanospheres. Uniform PBA–LS10 nanospheres with a minimal mean diameter of 375 nm and high stability were obtained when the LS content was 10 wt %. The PBA–LS10 nanospheres possess an increased electroconductivity of 0.109 S cm^?1 compared with that of poly(N‐butylaniline) (0.0751 S cm^?1). Furthermore, the PBA–LS10 nanospheres have a maximal silver‐ion sorption capacity of 815.0 mg g^?1 at an initial silver ion concentration of 50 mmol L ^?1 (25 °C for 48 h), an enhancement of 70.4 % compared with PBA. Moreover, a sorption mechanism of silver ions on the PBA–LS10 nanospheres is proposed. TEM and wide‐angle X‐ray diffraction results showed that silver nanoparticles with a diameter size range of 6.8–55 nm was achieved after sorption, indicating that the PBA–LS10 nanospheres had high reductibility for silver ions.     

Study of Sorption of 2,4‐D on Outer Peristaltic Part of Waste Tire Rubber Granules

From this study it was evident that outer peristaltic parts of waste tire granules gave the highest removal. Film and pore diffusions are the major factors controlling rates of sorption from solution by porous adsorbents. For sorption of 2,4‐D on waste tire rubber granules, the sorption rate coefficient of second‐order kinetic equation was utilized indirectly to determine the rate‐limiting step. The diffusion coefficient lies in the scale of 10^?8 cm²/s, and the pore diffusion coefficient is in the range of 10^?9–10^?10 cm²/s. So both film and pore diffusion are rate limiting. Considering external mass transfer from fluid to particle, using the effect of initial concentration, and using the effect of adsorbent size, no conclusion was reached regarding rate‐controlling steps. It is apparent from the study that external mass transfer (film diffusion) as well as intra‐particle diffusion (pore diffusion) play significant roles in the sorption process for 2,4‐D removal from water onto rubber granules.     

Poly(acrylamide-co-itaconic acid) as a Potential Ion-Exchange Sorbent for Effective Removal of Antibiotic Drug-Ciprofloxacin from Aqueous Solution

This study describes equilibrium and kinetic sorption studies to remove the antibiotic drug Ciprofloxacin (CF) from aqueous solutions using poly(acrylamide-co-itaconic acid) [poly(AAm-co-IA)] as polymeric cation exchanger sorbent material. The co-polymeric sorbent was prepared by free radical induced aqueous polymerization and was characterized by FTIR spectroscopy and TGA analysis. In addition, its physicochemical parameters were also determined. The various isotherm models, when applied to equilibrium sorption data at 28°C, followed the following order: Langmuir > Temkin > Freundlich, with the fair maximum sorption capacity (Q _o ) of 178.5 mg g^?1. The kinetic sorption data, obtained at 28°C, was applied to kinetic models such as pseudo first order equation, pseudo second order model and a simple Elovich model. Based on regression values, the order of fitness of these models was pseudo second order > pseudo first order > simple Elovich model. The second order adsorption coefficients k_2adswere found to be 58 × 10^?3, 52.7 × 10^?3, 34.01×10^?3 g/mg min for drug solutions with initial concentrations of 10, 20 and 30 mg L^?1 respectively The sorption mean free energy from the Dubinin–Raduschkevich (DR) isotherm was found to be nearly 8.839 kJ mol^?1 indicating an ion-exchange mechanism for drug uptake. The optimum pH value of sorbate solution for drug uptake was found to be around 6.0. Finally, the antibacterial action of drug was investigated and it was found that after adsorption there was a decrease in bacterial growth inhibition efficiency of drug solution.     

Neodymium two-step optogalvanic spectroscopy in a hollow cathode lamp

This paper presents the results of Doppler-limited optogalvanic spectroscopy in commercial neodymium hollow cathode lamp, ranging from 580 to 600 nm. Using the laser multistep excitation technique, five transitions for the first step excitation from the neodymium ground state and seven transitions related to the second step of photoionization scheme were observed. Within these results, for the first time, a new line, 596.645 nm, was observed which could be attributed to a possible two-step transition to neodymium energy level from the 16 979.352 cm^? 1 to 33 735.4 cm^? 1. The simulated (synthetic) spectra of a mixture of neon (Ne I) and neodymium (Nd I) in this region are compared with experiments in order to facilitate data analysis.     

Sensitive redox speciation of neptunium by CE–ICP–MS

Capillary electrophoresis (CE) was used to separate the neptunium oxidation states Np(IV) and Np(V), which are the only oxidation states of Np that are stable under environmental conditions. The CE setup was coupled to an inductively coupled plasma mass spectrometer (Agilent 7500ce) using a Mira Mist CE nebulizer and a Scott-type spray chamber. The combination of the separation capacity of CE with the detection sensitivity of inductively coupled plasma mass spectrometry (ICP-MS) allows identification and quantification of Np(IV) and Np(V) at the trace levels expected in the far field of a nuclear waste repository. Limits of detection of 1?×?10^-9 and 5?×?10^-10 mol L^-1 for Np(IV) and Np(V), respectively, were achieved, with a linear range from 10^-9 to 10^-6 mol L^-1. The method was applied to study the redox speciation of the Np remaining in solution after interaction of 5?×?10^-7 mol L^-1 Np(V) with Opalinus Clay. Under mildly oxidizing conditions, a Np sorption of 31% was found, with all the Np remaining in solution being Np(V). A second sorption experiment performed in the presence of Fe²⁺ led to complete sorption of the Np onto the clay. After desorption with HClO₄, a mixture of Np(IV) and Np(V) was found in solution by CE–ICP–MS, indicating that some of the sorbed Np had been reduced to Np(IV) by Fe²⁺.     

Chromatographic separation of neodymium isotopes by using chemical exchange process

The neodymium isotope effects were investigated in Nd–malate ligand exchange system using the highly porous cation exchange resin SQS-6. The temperature of the chromatographic columns was kept constant at 50 °C by temperature controlled water passed through the columns jackets. The separation coefficient of neodymium isotopes, ?’s, was calculated from the isotopic ratios precisely measured by means of an ICP mass spectrometer equipped with nine collectors as ion detectors. The separation coefficient, ? × 10⁵, were calculated and found to be 1.4, 4.8, 5.4, 10.6, 16.8 and 20.2 for ¹⁴³Nd, ¹⁴⁴Nd, ¹⁴⁵Nd, ¹⁴⁶Nd, ¹⁴⁸Nd and ¹⁵⁰Nd, respectively.     

Comparative study on lanthanum(III) sorption onto Lewatit TP 207 and Lewatit TP 260

Batch experiments are carried out for the sorption of La(III) onto commercial macroporous resins containing iminodiacetic (Lewatit TP 207) and aminomethylphosphonic acid groups (Lewatit TP 260). The operating variables studied are initial La(III) concentration, pH, temperature and contact time. Since the extraction kinetics were fast, with a mixture of 0.1 g of resin and 5 mL of lanthanum ions 0.5 × 10^?3 mol L^?1 solution, extraction equilibrium was reached within 30 min of mixing. The optimum pH values level for quantitative sorption were between 1.5 and 4.6 with Lewatit 207 and about 5.2 with Lewatit TP 260. The sorption capacities of Lewatit TP 207 and Lewatit TP 260 resins are 114.7 and 106.7 mg g^?1, respectively. Adsorption equilibrium data were calculated for Langmuir and Freundlich isotherms. It was found that the sorption of La(III) on Lewatit TP 207 was better suited to the Langmuir adsorption model while Freundlich adsorption model fitted better sorption on Lewatit TP 260. Thermodynamics data leads to endothermic and spontaneous process. ΔG° decreases with increasing temperature indicating that sorption process of La(III) on both Lewatit TP 207 and Lewatit TP 260 was more favored at high temperature.     

Sorption of iodine on Beishan granite: effect of speciation and humic acid

Sorption of iodine on Beishan granite was studied by batch method. Great difference exists in the sorption behaviors of I^? and IO₃^?. Under acidic condition, the sorption of IO₃^? improves dramatically, and IO₃^? could partly convert to I^?. However, the sorption of I^? is close to zero at all studied pH. Humic acid can slight improve the sorption of IO₃^?, but greatly improve the sorption of I^? in acidic condition. The postulated sorption mechanisms of IO₃^? are electrical interaction and followed by reduction.     

The States,Diffusion, and Concentration Distribution of Water in Radiation‐Formed PVA/PVP Hydrogels

Abstract

Hydrogels with various compositions of polyvinyl alcohol (PVA) and poly(1‐vinyl‐2‐ pyrrolidinone) (PVP) were prepared by irradiating mixtures of PVA and PVP in aqueous solutions with gamma‐rays from ⁶⁰Co sources at room temperature. The states of water in the hydrogels were characterized using DSC and NMR T₂ relaxation measurements and the kinetics of water diffusion in the hydrogels were studied by sorption experiments and NMR imaging. The DSC endothermic peaks in the temperature range ?10 to +10°C implied that there are at least two kinds of freezable water present in the matrix. The difference between the total water content and the freezable water content was referred to as bound water, which is not freezable. The weight fraction of water at which only nonfreezable water is present in a hydrogel with F_VP=0.19 has been estimated to be g_H2O/g_Polymer=0.375. From water sorption experiments, it was demonstrated that the early stage of the diffusion of water into the hydrogels was Fickian. A curve‐fit of the early‐stage experimental data to the Fickian model allowed determination of the water diffusion coefficient, which was found to lie between 1.5×10^?11 m² s^?1 and 4.5×10^?11 m² s^?1, depending on the polymer composition, the cross‐link density, and the temperature. It was also found that the energy barrier for diffusion of water molecules into PVA/PVP hydrogels was ≈24 kJ mol^?1. Additionally, the diffusion coefficients determined from NMR imaging of the volumetric swelling of the gels agreed well with the results obtained by the mass sorption method.     

Absorption Spectra of 4f Electron Transitions of Neodymium and Erbium with 8-Hydroxyquinoline-5-sulphonic Acid and Diethylamine Systems and Its Analytical Application

Abstract

In this paper the absorption spectra of 4f electron transitions of the systems of neodymium and erbium with 8-hydroxyquino-line-5-sulphonic acid and diethylamine have been studied by normal and third-derivative spectrophotometry. Their molar absorptivities are 80 l.mol^?1.cm^?1 for neodymium and 65 l.mol^?1.cm^?1 for erbium. Use of the third-derivative spectra, eliminates the interference by other rare earths and increases the sensitivity for Nd and Er. The derivative molar absorptivities are 390 1.mol^?1.cm^?1 for Nd and 367 1.mol^?1.cm^?1 for Er. The calibration graphs were linear up to 11.8 μg/ml of Nd and 12.3 μg/ml of Er, respectively. The relative standard deviations evaluated from eleven independent determinations of 7.2 μg/ml (for Nd) and 8.3 μg/ml (for Er) are 1.3% and 1.4%, respectively. The detection limits (signal to noise ratio = 2) are 0.2 μg/ml for Nd and 0.3 μg/ml for Er. The method has been developed for determining those two elements in mixture of lanthanides by means of the third-derivative spectra and the analytical results obtained are satisfactory.     

Investigation of Sr uptake by birnessite-type sorbents from seawater

Sorption of micro- and microamounts of Sr from seawater has been studied using granulated Na-birnessite. Distribution coefficients of ⁹⁰Sr in the natural seawater are 0.8–1.2?×?10³ ml g^?1, in the model seawater they are 1.6–1.8?×?10³ ml g^?1. Application of Na-birnessite was shown to be prospective in sorption–desorption–regeneration regime. In dynamic sorption conditions, over 150 bed volumes of seawater can be purified till 5% breakthrough occurs at feed rate 10 BV h^?1. Na-birnessite can be used for ⁹⁰Sr radionuclide removal from liquid radioactive wastes containing seawater.