Influence of chemical equilibrium in introduced oxygen vacancies on resistive switching in epitaxial Pt-CeO<Subscript>2</Subscript> system

We investigate the introduction of oxygen vacancies by the interaction of Pt with CeO₂(111) (ceria) thin epitaxial film grown on Cu(111) and the influence of the vacancies on resistive switching behavior. For this purpose, we used X-ray photoelectron spectroscopy and conductive atomic force microscopy. We found out that after Pt deposition, the ceria film was partially reduced. By our estimation, the reduction occurs not only at the Pt/CeO₂ interface, but also on the surface of the ceria film which is not covered by Pt, after Pt deposition and annealing. A different distribution of oxygen vacancies in the film proves to have an influence on the resistance switching process of the film. Finally, the proper balance between the reduced and the unreduced species in order to obtain relatively stable repeatable resistance switch with clear resistance window is discussed.     

Growth,characterization and interfacial reaction of magnetron sputtered Pt/CeO2 thin films on Si and Si3N4 substrates

Growth of magnetron sputtered Pt/CeO₂ thin films on Si and Si₃N₄ were characterized by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM) and X‐ray photoelectron spectroscopy (XPS). Interaction of Pt/CeO₂ films with Si on Si and Si₃N₄ substrates was extensively investigated by XPS. XRD studies show that films are oriented preferentially to (200) direction of CeO₂. XPS results show that Pt is mainly present in +2 oxidation state in Pt/CeO₂/Si film, whereas Pt⁴⁺ predominates in Pt/CeO₂/Si₃N₄ film. Concentration of Pt⁴⁺ species is more than four times on Si₃N₄ substrate as compared with that on Si. Ce is present as both +4 and +3 oxidation states in Pt/CeO₂ films deposited on Si and Si₃N₄ substrates, but concentration of Ce³⁺ species is more in Pt/CeO₂/Si film. Interfacial reaction between CeO₂ and Si substrate is controlled in the presence of Pt. Pt/Ce concentration ratio decreases in Pt/CeO₂/Si₃N₄ film upon successive sputtering, whereas this ratio decreases initially and then increases in Pt/CeO₂/Si film. Copyright © 2015 John Wiley & Sons, Ltd.     

Construction of Cu-Ce interface for boosting toluene oxidation: Study of Cu-Ce interaction and intermediates identified by in situ DRIFTS

A facile hydrothermal method was applied to gain stably and highly efficient CuO-CeO₂ (denoted as Cu1Ce2) catalyst for toluene oxidation. The changes of surface and inter properties on Cu1Ce2 were investigated comparing with pure CeO₂ and pure CuO. The formation of Cu-Ce interface promotes the electron transfer between Cu and Ce through Cu²⁺ + Ce³⁺ ↔ Cu⁺ + Ce⁴⁺ and leads to high redox properties and mobility of oxygen species. Thus, the Cu1Ce2 catalyst makes up the shortcoming of CeO₂ and CuO and achieved high catalytic performance with T₅₀ = 234 °C and T₉₉ = 250 °C (the temperature at which 50% and 90% C₇H₈ conversion is obtained, respectively) for toluene oxidation. Different reaction steps and intermediates for toluene oxidation over Cu1Ce2, CeO₂ and CuO were detected by in situ DRIFTS, the fast benzyl species conversion and preferential transformation of benzoates into carbonates through C=C breaking over Cu1Ce2 should accelerate the reaction.     

Adsorption and migration growth of the Ce,O, and F adatoms on the CeO2 (111) surface: A density functional theory study

In order to investigate the microscopic behavior of the crystal surface growth of the fluorinated cerium dioxide polishing powder, the adsorption and migration of the Ce, O, and F atoms on the CeO₂ (111) surface were studied by using density functional theory with Hubbard correction +U. The adsorption energies of three single atoms at five high-symmetry sites and the migration activation energies along the migration pathway on the CeO₂ (111) surface were calculated. Results show that the most stable adsorption sites of the Ce, O, and F atoms were the O_h, Ce_bri, and Ce_t sites, respectively. The Ce atom migrated from the O_h to the O_t site. The O atom migrated from the Ce_bri to the O_bri site. The F atom migrated from the Ce_t to the O_h site. The migration activation energies of the Ce, O, and F atoms along the migration pathways were 1.526, 0.597, and 0.263 eV, respectively. The F adatom does not change the spatial configuration of the Ce and the O atoms. When the O vacancy occurs on the CeO₂ (111) surface, the F adatom can make up for the O vacancy defect.     

Temporal analysis of products (TAP) study on oxygen storage properties over Pt−Rh/CeO2 catalyst

The oxygen storage capacity of CeO₂, Ce_0.9Pr_0.1O₂, Pt?Rh/CeO₂ and Pt?Rh/Ce_0.9Pr_0.1O₂ was investigated by conventional GC pulse method and transient pulse techniques. It is shown that incorporation of PrO_y into CeO₂ matrix strongly promotes oxygen storage capacity (OSC) measured using the transient pulse technique. The improvement of OSC at low temperature is observed in Pt?Rh loaded onto CeO₂ and Ce?Pr catalysts.     

Corrosion protective ability of electrodeposited ceria layers

It has been ascertained that the electrochemically deposited thin films of cerium oxides, containing mainly CeO₂ and also some insignificant amount of Ce₂O₃, are acting as an effective cathodic coating, leading to restoration of the passive state of the studied stainless steel (OC 404) samples. This effect is associated with a strong shifting of the stationary corrosion potential of the steel in positive direction, moving over from potentials characteristic of corrosion in active state to potentials falling within the zone of passivity. In this respect, another basic purpose of the investigations was the elucidation of the mechanism of action of the cerium oxide film and in particular collecting experimental evidence for the supposition about the occurrence of an efficient depolarization reaction of CeO₂ reduction (resulting in a state of passivity—improved ability of self-passivation) instead of hydrogen depolarization reaction. For this purpose, we considered also the decrease in the surface concentration of ceria in the passive layer under the conditions of the actual corrosion process (self-dissolution) of the stainless steel by means of XPS, SEM, ICP-AES, and gravimetric analyses. A decrease in the surface concentration of CeO₂ (Ce⁴⁺) has been observed, which is known to be chemically inert in acidic media. The obtained results prove the occurrence of an effective cathodic process of Ce⁴⁺ (CeO₂) reduction into Ce³⁺ (soluble in acids Ce₂O₃ ) in the superficial oxide film.     

CeO2掺量对铝硼硅玻璃固化体抗浸出性能的影响

通过XRD、XPS、SEM和ICP-MS等表征方法,研究不同掺量下CeO2在铝硼硅玻璃固化体中物相的变化及其对抗浸出性能的影响。结果表明:玻璃网络结构中nCe4+∶nCe3+=9.25∶1,且CeO2质量分数达到或超过7%时,固化体内开始析出方铈矿晶体结构。1 d时随着CeO2掺量的增加,玻璃固化体rCe先降低后升高,28 d时则表现出逐渐降低的趋势。而在同一CeO2掺量下,rCe随浸出时间的延长逐渐降低,其中CeO2质量分数为9%的玻璃样品bE的rCe在7 d后稳定在4×10-6g.m-2.d-1以下,抗浸出性能较为优异。因此控制CeO2在一定范围内过量析出,可获得抗浸出性能优于完全溶于玻璃体的固化体。     

低于300℃时两种氧化铈材料对稀燃阶段NOx存储性能的影响

研究了低于300 ℃时两种氧化铈对稀燃阶段NO_x存储性能的影响,催化剂由2%（w）Pt/Al₂O₃（PA）与CeO₂-X（X=S,I）机械混合制备. X射线衍射（XRD）,BET表面积和扫描电子显微镜（SEM）用于表征材料的物理结构. X射线光电子能谱（XPS）和H₂程序升温还原（H₂-TPR）用于表面Ce³⁺和活性氧定量. 原位漫反射傅里叶变换红外光谱（in-situ DRIFTS）用于分析表面NO_x吸附物种. 相比于CeO₂-I,CeO₂-S 具有优良的物理化学性能,包括高比表面积、丰富的空隙结构、较高的抗老化能力及表面Ce³⁺浓度. 因而,Pt/Al₂O₃+CeO₂-S 表现出优异的NO_x存储能力. 此外,PA+CeO₂-X（X=S,I）上存在Pt 与CeO₂之间的相互作用,可提高表面氧物种的活性进而促进NO氧化及NO_x存储. PA+CeO₂-S上的这种相互作用要强于PA+CeO₂-I. 研究表明,表面Ce³⁺浓度和活性氧含量对NO_x存储起到重要作用. 然而经过水热处理后,Pt 与老化的氧化铈（ACS,ACI）之间的相互作用降低,并且两种氧化铈NO_x存储性能显著下降. 另外,与PA+ACS（ACI）相比,PA+PACS（PACI）样品NO_x存储能力得到改善,这归因于表面氧物种活性增加能促进硝酸盐的形成.     

One-step electrochemical synthesis of Pt–CeO2 composite thin films on a glassy carbon electrode

A Pt–CeO₂ composite thin film was prepared on a glassy carbon electrode by one-step electrochemical deposition technique. The film was constructed of Pt particles well dispersed and embedded in a porous CeO₂ substrate. The prepared Pt–CeO₂/GC electrode showed a better catalytic performance toward methanol electrooxidation compared with the bulk Pt electrode.     

Mechanochemical Activation of Cu–CeO<Subscript>2</Subscript> Mixture as a Promising Technique for the Solid-State Synthesis of Catalysts for the Selective Oxidation of CO in the Presence of H<Subscript>2</Subscript>

A new ecologically clean method for the solid-phase synthesis of oxide copper–ceria catalysts with the use of the mechanochemical activation of a mixture of Cu powder (8 wt %) with CeO₂ was developed. It was established that metallic copper was oxidized by oxygen from CeO₂ in the course of mechanochemical activation. The intensity of a signal due to metallic Cu in the X-ray diffraction analysis spectra decreased with the duration of mechanochemical activation. The Cu¹⁺, Cu²⁺, and Ce³⁺ ions were detected on the sample surface by X-ray photoelectron spectroscopy. The application of temperature-programmed reduction (TPR) made it possible to detect two active oxygen species in the reaction of CO oxidation in the regions of 190 and 210–220°C by a TPR-H₂ method and in the regions of 150 and 180–190°C by a TPR-CO method. It is likely that the former species occurred in the catalytically active nanocomposite surface structures containing Cu–O–Ce bonds, whereas the latter occurred in the finely dispersed particles of CuO on the surface of CeO₂. The maximum conversion of CO (98%, 165°C) reached by the mechanochemical activation of the sample for 60 min was almost the same as conversion on a supported CuO/CeO₂ catalyst.     

Preparation and surface characterization of Pt–Au/C cathode catalysts with ceria modification for oxygen reduction reaction

Alloy catalysts of Pt₅₀Au₅₀/Ce_xC with various Ce additions (x) were prepared for the oxygen reduction reaction (ORR). The characterization of the alloy structures, surface species, and electro-catalytic activities of prepared alloy catalysts were performed by XRD, temperature-programmed reduction (TPR), and rotating disc electrode (RDE) technique, respectively. The ORR activity of Pt₅₀Au₅₀/C alloy catalyst with a promotion of 15% CeO₂ was enhanced significantly in comparison to the commercial Pt/C catalyst within the mixed kinetic-diffusion control region. The addition of CeO₂ decreased the particle sizes, increased the dispersion and enhanced the surface segregation of Pt which resulting in an alloy surface with a moderate oxophilicity on alloy catalysts.     

Electrocatalysis and redox behavior of Pt2+ ion in CeO2 and Ce0.85Ti0.15O2: XPS evidence of participation of lattice oxygen for high activity

Electronic states of CeO₂, Ce_1????em>x Pt _x O_2????em>δ , and Ce_{1????em>x????em>y} Ti _y Pt _x O_2????em>δ electrodes have been investigated by X-ray photoelectron spectroscopy as a function of applied potential for oxygen evolution and formic acid and methanol oxidation. Ionically dispersed platinum in Ce_1????em>x Pt _x O_2????em>δ and Ce_{1????em>x????em>y} Ti _y Pt _x O_2????em>δ is active toward these reactions compared with CeO₂ alone. Higher electrocatalytic activity of Pt²⁺ ions in CeO₂ and Ce_1????em>x Ti _x O₂ compared with the same amount of Pt⁰ in Pt/C is attributed to Pt²⁺ ion interaction with CeO₂ and Ce_1????em>x Ti _x O₂ to activate the lattice oxygen of the support oxide. Utilization of this activated lattice oxygen has been demonstrated in terms of high oxygen evolution in acid medium with these catalysts. Further, ionic platinum in CeO₂ and Ce_1????em>x Ti _x O₂ does not suffer from CO poisoning effect unlike Pt⁰ in Pt/C due to participation of activated lattice oxygen which oxidizes the intermediate CO to CO₂. Hence, higher activity is observed toward formic acid and methanol oxidation compared with same amount of Pt metal in Pt/C.     

Facile Synthesis of Platinum–Cerium(IV) Oxide Hybrids Arched on Reduced Graphene Oxide Catalyst in Reverse Micelles with High Activity and Durability for Hydrolysis of Ammonia Borane

Highly dispersed Pt‐CeO₂ hybrids arched on reduced graphene oxide (Pt‐CeO₂/rGO) were facilely synthesized by a combination of the reverse micelle technique and a redox reaction without any additional reductant or surfactant. Under a N₂ atmosphere, the redox reaction between Ce³⁺ and Pt²⁺ occurs automatically in alkaline solution, which results in the formation of Pt‐CeO₂/rGO nanocomposites (NCs). The as‐synthesized Pt‐CeO₂/rGO NCs exhibit superior catalytic performance relative to that shown by the free Pt nanoparticles, Pt/rGO, Pt‐CeO₂ hybrid, and the physical mixture of Pt‐CeO₂ and rGO; furthermore, the nanocomposites show significantly better activity than the commercial Pt/C catalyst toward the hydrolysis of ammonia borane (NH₃BH₃) at room temperature. Moreover, the Pt‐CeO₂/rGO NCs have remarkable stability, and 92 % of their initial catalytic activity is preserved even after 10 runs. The excellent activity of the Pt‐CeO₂/rGO NCs can be attributed not only to the synergistic structure but also to the electronic effects of the Pt‐CeO₂/rGO NCs among Pt, CeO₂, and rGO.     

Analysis of Dopant Atom Distribution and Quantification of Oxygen Vacancies on Individual Gd‐Doped CeO2 Nanocrystals

This work reports the analysis of the distribution of Gd atoms and the quantification of O vacancies applied to individual CeO₂ and Gd‐doped CeO₂ nanocrystals by electron energy‐loss spectroscopy. The concentration of O vacancies measured on the undoped system (6.3±2.6 %) matches the expected value given the typical Ce³⁺ content previously reported for CeO₂ nanoparticles. The doped nanoparticles have an uneven distribution of dopant atoms and an atypical amount of O vacant sites (37.7±4.1 %). The measured decrease of the O content induced by Gd doping cannot be explained solely by the charge balance including Ce³⁺ and Gd³⁺ ions.     

The reduction of CeO2 in the ketonization of ch3cooh

Summary The decomposition of CH₃COOH on various samples of CeO₂ has been studied. The reduction of Ce to Ce⁺³ with the simultaneous oxidation of the CH₃COOH has been detected.     

Growth and Electronic Properties of Ag Nanoparticles on Reduced CeO2-x(111) Films

Ag nanoparticles grown on reduced CeO_2-x thin films have been studied by X-ray photoelec-tron spectroscopy and resonant photoelectron spectroscopy of the valence band to understand the effect of oxygen vacancies in the CeO_2-x thin films on the growth and interfacial elec-tronic properties of Ag. Ag grows as three-dimensional particles on the CeO_2-x(111) surface at 300 K. Compared to the fully oxidized ceria substrate surface, Ag favors the growth of smaller particles with a larger particle density on the reduced ceria substrate surface, which can be attributed to the nucleation of Ag on oxygen vacancies. The binding energy of Ag3d increases when the Ag particle size decreases, which is mainly attributed to the final-state screening. The interfacial interaction between Ag and CeO_2-x(111) is weak. The resonant enhancement of the 4f level of Ce³⁺ species in RPES indicates a partial Ce⁴⁺→Ce³⁺ re-duction after Ag deposited on reduced ceria surface. The sintering temperature of Ag on CeO_1.85(111) surface during annealing is a little higher than that of Ag on CeO₂(111) surface, indicating that Ag nanoparticles are more stable on the reduced ceria surface.     

Sol–gel synthesis and optical behavior of Mg–Ce–O nano-crystallites

The Mg–Ce–O powder are shown to contain periclase-type MgO and/or fluoride-type cerium oxide (CeO₂) depending upon the composition (x) defined by Ce/(Ce + Mg) atomic ratio. Lattice contraction of pariclase phase of MgO (average crystallite size ~8.8 nm) at Ce content of ‘x’ = 0.20 in comparison to pure MgO (crystallite size ~9.5 nm) has been realized due to oxygen vacancy formation. The optical band gap values of CeO₂ varies (3.0–3.2 eV) due to oxygen vacancy formation in CeO₂ phase, crystallite size and/or Ce³⁺/Ce⁴⁺ ratio. Further, the addition of Ce has shown to reduce the physisorption and chemisorption of water significantly as reflected by (1) suppression of related absorption peaks and (2) absence of magnesium hydroxide, Mg(OH)₂, bands in Fourier transform infrared spectra.     

Chemical states of ppm cerium in steel by ToF-SIMS analysis

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) was employed for an analysis of the rare earth element Ce in pure iron and steel. Secondary ion images showed that the amount of the segregation of Ce and its oxides was much less as the concentration of Ce decreased to about 11 ppm in the pure iron. In terms of depth profiling from the surface to the matrix, variation of the CeO⁺/Ce⁺ ratio in a Ce oxides sample and a pure Ce sample exhibited difference between oxidized state and metallic state. It was demonstrated that metallic Ce was presented when the ratio of CeO⁺/Ce⁺ decreased to approximately 2 and even smaller. Oxygen content with concentration of tens of ppm may influence the ratio obviously. Such ToF-SIMS analysis was also feasible to discern the states of cerium in a Q345E steel with concentration in ppm level.     

Formation of cereous sulphate phase upon interaction of So2 with ceria at room temperature

The adsorption of SO₂ gas on ceria solid at room temperature has been investigated by thermal analysis, Raman spectroscopy and electron paramagnetic resonance (EPR). The results confirm that SO₂ transformation into sulphate species occurs at 25°C with a concomitant reduction of Ce⁴⁺ to Ce³⁺ ions. The formation of Ce(III)-sulphate phase has been evidenced on ceria surface. The thermal analysis revealed a complete decomposition of cereous sulphate phase to CeO₂ at 785°C. The change of oxidation state of Ce(IV) to Ce(III) during the formation of sulphate phase has been confirmed also by EPR technique. This revised version was published online in August 2006 with corrections to the Cover Date.     

Oxidation‐State Analysis of Ceria by X‐ray Photoelectron Spectroscopy

Three different methods to determine the oxide‐phase concentration in mixed cerium oxide by hard X‐ray photoelectron spectroscopy are applied and quantitatively compared. Synchrotron‐based characterization of the O 1s region was used as a benchmark to introduce a method based on the weighted superposition of the Ce 3d spectra of the pure Ce³⁺ and Ce⁴⁺ phases, which was shown to lead to reliable and highly accurate determination of the mean oxidation state in mixed cerium oxides. The results obtained reveal a linear relation between the third distinct final state (u′′′) satellite peak intensity of the Ce⁴⁺ phase and the Ce⁴⁺ concentration by proper inclusion of Ce³⁺‐related plasmon satellite peaks, which contradicts previous claims of nonlinear behavior. In contrast, quantitative conventional peak‐fitting procedures were shown to be well suited for the Ce 2p region due to its relatively simple structure. Additional satellite features observed in the Ce 3d spectrum of CeO₂ were proposed to originate from plasmon contributions.