A Schiff base fluorescence probe for highly selective turn-on recognition of Zn2+

A simple Schiff base CTS, synthesized between 2-hydroxy-1-naphthaldehyde and 2-benzylthio-ethanamine, was found to be a good turn-on fluorescence probe for the detection of Zn²⁺, due to the restriction of the rotation of the bond between CN and naphthalene ring and/or the blocking of the photo-induced electron transfer (PET) mechanism of the nitrogen atom to naphthalene ring. Excellent selectivity for Zn²⁺ was evidenced, over many other competing ions, including Fe³⁺, Cr³⁺, Ni²⁺, Co²⁺, Fe²⁺,Mn²⁺, Ca²⁺, Hg²⁺, Pb²⁺, Cu²⁺, Mg²⁺, Ba²⁺, Cd²⁺, Ag⁺, Li⁺, K⁺, and Na⁺, in EtOH/HEPES buffer (95:5, v/v, pH = 7.4). It was noteworthy that Cd²⁺ had no interference with Zn²⁺. The stoichiometric complex of CTS-Zn²⁺ was determined to be 2:1 for CTS and Zn²⁺ in molar, based on the Job plot and single crystal X-ray diffraction data. The binding constant of the complex was 85.7 M^?2 with a detection limit of 5.03 × 10^?7 M. The fluorescence bio-imaging capability of CTS to detect Zn²⁺ in live cells was also studied. These results indicated that CTS could serve as a favorable probe for Zn²⁺.     

A novel colorimetric chemosensor based on quinoline for the sequential detection of Fe3+ and PPi in aqueous solution

A novel quinoline-functionalized Schiff-base derivative PY was designed and synthesized. Sensor PY displayed highly selective and sensitive fluorescence enhancement and naked-eye color change to Fe³⁺ in the presence of other competing cations. The mechanisms have been supported by Job’s plot evaluation, FT-MS and theoretical calculations. The in situ generated PY-Fe³⁺ complex solution exhibited a high selectivity toward PPi via Fe³⁺ displacement approach. The detection limits of sensor PY to Fe³⁺ and PY-Fe³⁺ complex to PPi were estimated to be 4.24 × 10^?8 M and 8.18 × 10^?8 M, respectively. This successive recognition feature of sensor PY makes it has a potential utility for Fe³⁺ and PPi detection in aqueous solution. A B3LYP/6-31G(d,p) basis set was employed for optimization of PY and PY-Fe³⁺ complex.     

A simple highly sensitive and selective turn-on fluorescent chemosensor for the recognition of Pb2+

A simple highly sensitive and selective turn-on fluorescent chemosensor L based on bis-Schiff-base for Pb²⁺ ions was synthesized and characterized by spectroscopic techniques. L having high binding affinity towards Pb²⁺ ions of 2.10 × 10⁴ M^?1 selectively detects Pb²⁺ ions with almost no interference among various competitive ions by a 11-fold fluorescent enhancement in CH₃CN/H₂O (95:5, v/v) solution over a wide pH range. Moreover, sensor L displayed a lower detection limit of 3.80 × 10^?7 M, which is low enough for sensing sub-millimolar concentration of Pb²⁺ encountered practically.     

A fast,highly selective and sensitive dansyl-based fluorescent sensor for copper (II) ions and its imaging application in living cells

Since the copper ions (Cu²⁺) play a fatal role in many foundational physiological processes, it is important to develop a simple, highly sensitive and selective sensor for Cu²⁺ detection in living systems. Herein, an intramolecular charge transfer (ICT) and dansyl-based fluorescent chemosensor 1 was designed, synthesized and characterized for the sensitive and selective quantification of Cu²⁺. It exhibited remarkable fluorescence quenching upon addition of Cu²⁺ over other selected metal ions, attributed to the complex formation between 1 and Cu²⁺ with the association constant 6.7 × 10⁵ M^?1. The sensor 1 showed a fast and linear response towards Cu²⁺ in the concentration range from 0 to 12.5 × 10^?6 mol L^?1 with the detection limit of 2.5 × 10^?7 mol L^?1. This detection could be carried out in a wide pH range of 5.0–14. Furthermore, sensor 1 can be used for detecting Cu²⁺ in living cells.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

Quinoline-based highly selective and sensitive fluorescent probe specific for Cd2+ detection in mixed aqueous media

Quinoline-based fluorescent probe as a recognition unit was designed and synthesized in this study. The probe R1 displayed excellent selectivity and sensitivity for cadmium ions (Cd²⁺) over a wide range of metal ions in acetonitrile-water (MeCN-H₂O) mixed solution. In order to better understand the recognition mechanism between probe and Cd²⁺, the density functional theory calculations were performed. Finally, the colorimetric experiment result was observed and conveniently monitored by the naked eye, and a visual detection limit of 4 × 10^?6 mol L^?1 was achieved. These experimental results indicated the promising potential of the probe to detect Cd²⁺ in biological system. Furthermore, the probe R1 was successfully used for the highly sensitive detection of Cd²⁺ in living cells.     

Coumarin-based fluorescent chemosensor for the selective quantification of Zn2+ and AcO− in an aqueous solution and living cells

In this work, we report a novel fluorescence chemosensor HM based on the coumarin fluorophore for the quantification of Zn²⁺ and AcO^?. HM specifically binds to Zn²⁺ in the presence of other competing cations, and evident changes in UV–vis and fluorescence spectra in HEPES buffer are noticed. The in situ generated HM-Zn²⁺ complex solution exhibit a high selectivity toward AcO^? via Zn²⁺ displacement approach. The detection limits of HM for Zn²⁺ and HM-Zn²⁺ for AcO^? were estimated to be 7.24 × 10^?8 M and 9.41 × 10^?8 M, respectively. HM and the resultant complex HM-Zn²⁺ exhibit low cytotoxicity and cell-membrane permeability, which makes them capable of Zn²⁺ and AcO^? imaging in living Hep G2 cells. A B3LYP/6-31G(d,p) basis set was employed for optimization of HM and HM-Zn²⁺ complex.     

Fused bis[2-(2′-hydroxyphenyl)benzoxazole] derivatives for improved fluoride sensing: The impact of regiochemistry and competitive hydrogen bonding

Development of fluorescent chemical sensors for fluoride is important due to increased use of fluoride in environment. A fused bis[2-(2′-hydroxyphenyl)benzoxazole] 5, which is capable of giving ESIPT emission, is found to be a useful fluorescent sensor for fluoride detection. Upon binding to fluoride, bis(HBO) 5 shows a large spectral shift in both fluorescence (from ～490 nm to ～440 nm) and absorption (from 353 nm to 392 nm). In comparison with the isomeric 4, bis(HBO) 5 dramatically improves the sensitivity in fluoride binding (by an order of magnitude), revealing a large impact of regiochemistry on the sensor performance. ¹H NMR has been used to study the fluoride binding, and to correlate the intramolecular hydrogen bonding with the fluoride response. Sensitivity of 5 towards fluoride is as low as 10^?5 M. Bis(HBO) 5 also showed excellent selectivity towards fluoride while being silent to other anions (Cl^?, Br^?, HS^? and PO₄^3?), thus making 5 a potentially useful probe.     

Long-distance electronic interaction in a molecular wire consisting of a ferrocenyl–ethynyl unit bridging two [(η5-C5H5)(dppe)M] metal centers

Several multinuclear ferrocenyl–ethynyl complexes of formula [(η⁵-C₅H₅)(dppe)M^II?CC–(fc)_n–CC–M^II(dppe)(η⁵-C₅H₅)] (fc = ferrocenyl; dppe = Ph₂PCH₂CH₂PPh₂; 1: M^II = Ru²⁺, n = 1; 2: M^II = Ru²⁺, n = 2; 3: M^II = Ru²⁺, n = 3; 4: M^II = Fe²⁺, n = 2; 5: M^II = Fe²⁺, n = 3) were studied. Structural determinations of 2 and 4 confirm the ferrocenyl group directly linked to the ethynyl linkage which is linked to the pseudo-octahedral [(η⁵-C₅H₅)(dppe)M] metal center. Complexes of 1–5 undergo sequential reversible oxidation events from 0.0 V to 1.0 V referred to the Ag/AgCl electrode in anhydrous CH₂Cl₂ solution and the low-potential waves have been assigned to the end-capped metallic centers. The solid-state and solution-state electronic configurations in the resulting oxidation products of [1]⁺ and [2]²⁺ were characterized by IR, X-band EPR spectroscopy, and UV–Vis at room temperature and 77 K. In [1]⁺ and [2]²⁺, broad intervalence transition band near 1600 nm is assigned to the intervalence transition involving photo-induced electron transfer between the Ru³⁺ and Fe²⁺ metal centers, indicating the existence of strong metal-to-metal interaction. Application of Hush’s theoretical analysis of intervalence transition band to determine the nature and magnitude of the electronic coupling between the metal sites in complexes [1]⁺ and [2]²⁺ is also reported. Computational calculations reveal that the ferrocenyl–ethynyl-based orbitals do mix significantly with the (η⁵-C₅H₅)(dppe)Ru metallic orbitals. It clearly appears from this work that the ferrocenyl–ethynyl spacers strongly contribute in propagating electron delocalization.     

Toward a highly sensitive and selective indole-rhodamine-based light-up probe for Hg2+ and its application in living cells

We herein designed and synthesized a light-up fluorescent probe L1 for Hg²⁺ species, which is based on indole derivative and Rhodamine fluorophore. The new probe can show a linear response to Hg²⁺ with high sensitivity and selectivity. As the Hg²⁺ concentration changed from 0 to 450 μM, the fluorescence intensity of L1 at 575 nm changed from 50 to 6181 (～120-fold). The detection limit of the probe was 5.0 × 10^?8 M. Besides, we have successfully applied L1 to monitor Hg²⁺ species in living MCF-7 cells by way of fluorescence imaging.     

Spectral studies of Fe(III) complexes of dipodal tridentate chelating agents

The dipodal ligands (Im) and (BIm) as well as complexes [FeLCl₃] [L = Im (1) and BIm (2)] have been prepared and studied using spectroscopic techniques. The magnetic moment, IR, electronic (ligand field), FAB-mass and NMR spectral data indicate a hexa-coordinate geometry around high-spin state Fe³⁺ where the ligands coordinate as a tridentate [N,N,N] chelating agent. ⁵⁷Fe-Mössbauer spectral data confirmed the presence of a ligand asymmetry around Fe³⁺ in a high-spin state electronic configuration (t_2g³,e_g², S = 5/2) with nuclear transition Fe(±3/2 → ±1/2) exhibiting Kramer's double degeneracy. The molecular computations provided the optimum energy perspective plots for the molecular geometries giving the important structural data.     

A pyrene-based dual chemosensor for colorimetric detection of Cu2+ and fluorescent detection of Fe3+

A pyrene based chemosensor was designed and synthesized. The pyrene fluorophore was connected with a pyridine unit through a Schiff base structure to give the sensor (L). L was tested with a variety of metal ions and exhibited high colorimetric selectivities for Cu²⁺ and Fe³⁺ over other ions. Upon binding with Cu²⁺ or Fe³⁺, L showed an obvious optical color change from colorless to pink for Cu²⁺ or orange for Fe³⁺ over a wide pH range from 3 to 12. Moreover, the fluorescence of L at 370 nm decreased sharply after bonding with Fe³⁺, while other metal ions including Cu²⁺ had no apparent interference. Thus, using such single chemosensor, Cu²⁺ and Fe³⁺ can be detected independently with high selectivity and sensitivity. The limits of detection toward Cu²⁺ and Fe³⁺ were 8.5 and 2.0 μM, respectively. DFT calculation results also proved the formation of stable coordination complexes and the phenomenon of fluorescence quenching by Fe³⁺. Furthermore, L was also successfully used as a bioimaging reagent for detection of Fe³⁺ in living cells.     

Synthesis,structures and magnetic properties of two hexanuclear complexes

The reaction of salicylaldoxime (H₂salox) with Mn(ClO₄)₂ · 6H₂O, NaN(CN)₂ and NEt₃ in MeOH affords a Mn^III₆ hexanuclear complex of [Mn₆O₂(salox)₆(MeOH)₆(NCNCONH₂)₂] (1), while reaction of H₂salox with MnCl₂ · 4H₂O and NEt₄OH in EtOH affords a Mn^III₆ hexanuclear complex of [Mn₆O₂(salox)₆(EtOH)₄(H₂O)₂Cl₂] (2). Both complexes 1 and 2 contain a [Mn^III₆(μ₃-O)₂]¹⁴⁺ core, which is a known structural type in the family of Mn₆ complexes. Variable temperature magnetic susceptibilities and magnetization measurement of complexes 1 and 2 have been carried out. Exchange interactions of metal centers for complexes 1 and 2 are fitted by a full diagonalization matrix method. The fitting results indicate that both complexes 1 and 2 have the ground-state spin value of S = 4, and the ground state of complex 1 has the much closer energy to low-lying spin states than that of complex 2. Magnetization measurements at 2.0–4.0 K and 10–70 kG confirm that the ground state is S = 4, with significant magnetoanisotropy as gauged by the D value of ?0.82 cm^?1 and ?1.18 cm^?1, for 1 and 2, respectively. The frequency dependence of the out-of-phase component in alternating current magnetic susceptibilities for both complexes 1 and 2 indicates the slow magnetic relaxation of superparamagnetic behaviour with a U_eff of 27.0(1) K and τ₀ = 3.8(2) × 10^?9 s for complex 1, and U_eff of 25.1(6) K and τ₀ = 4.6(1) × 10^?8 s for complex 2.     

Functionalized N-heterocyclic carbene iridium complexes: Synthesis,structure and addition polymerization of norbornene

Picolyl, pyridine, and methyl functionalized N-heterocyclic carbene iridium complexes [Cp¹Ir(C^N)Cl]Cl (4, C^N = 3-Methyl-1-picolyimidazol-2-ylidene), [Cp¹Ir(C^N)Cl][Cp¹IrCl₃] (5), [Cp¹Ir(C-N)Cl]Cl (6, C-N = 3-Methyl-1-pyridylimidazol-2-ylidene) and [Cp¹Ir(L)Cl₂] (7, L = 1,3-dimethylimidazol-2-ylidene) have been synthesized by transmetallation from Ag(I) carbene species, and characterized by ¹H NMR, ¹³C NMR spectra and elemental analyses. The molecular structures of 5–7 have been confirmed by X-ray single-crystal analyses. The iridium carbene complexes 4 and 6 show moderate catalytic activities (3.03 × 10⁵ g PNB (mol Ir)^?1 h^?1 and 1.70 × 10⁶ g PNB (mol Ir)^?1 h^?1) for the addition polymerization of norbornene in the presence of methylaluminoxane (MAO) as co-catalyst. The produced polynorbornene have been characterized by IR, ¹H NMR and ¹³C NMR spectra, showing it follows the vinyl-addition-type of polymerization.     

Cu2+-selective turn-on fluorescence signaling based on metal-induced hydrolysis of pyrenecarbohydrazide

We developed a simple Cu²⁺-selective turn-on fluorescence signaling probe based on the hydrolysis of 1-pyrenecarbohydrazide (1) to 1-pyrenecarboxylic acid. Probe 1 exhibited prominent fluorescence signaling of Cu²⁺ ions in a 10% aqueous Tris-buffered (pH 7.0) DMSO solution with a detection limit of 5.93 × 10^?8 M. Signaling with control compounds derived from pyreneacetic acid and pyrenebutyric acid showed that the fluorescence signal became less pronounced as the distance between the hydrazide functionality and the pyrene fluorophore increased. As a practical application, this probe was employed for the determination of Cu²⁺ in a simulated semiconductor wastewater.     

Effect of intraligand π-delocalization on the photophysical properties of two new Ru(II) complexes

Two new Ru(II) complexes, [Ru(bpy)₂(1-COO-iqu)]⁺ (2; bpy = 2,2′-bipyridine, 1-COO-iqu^? = isoquinoline-1-carboxylate) and [Ru(bpy)₂(3-COO-iqu)]⁺ (3; 3-COO-iqu^? = isoquinoline-3-carboxylate), were prepared and their crystal structures solved. The ground and excited state properties of 2 and 3 were characterized and compared to those of [Ru(bpy)₃]²⁺ (1). The presence of the oxygen atom in the Ru(II) coordination sphere makes 2 and 3 easier to oxidize than 1. The Ru → bpy MLCT absorption and emission of 2 and 3 are red-shifted relative to that of 1 in CH₂Cl₂, and the E₀₀ energies were estimated to be 1.89 eV and 1.95 eV from the low temperature emission of 2 and 3, resulting in excited state oxidation potentials of ?1.03 V and ?1.10 V vs SCE, respectively. In addition to the short-lived emissive ³MLCT state, a long-lived species is observed in the transient absorption of 3 in DMSO (τ = 49 μs) and pyridine (τ = 44 μs), assigned to a solvent-coordinated complex. This intermediate is not observed for 3 in non-polar solvents or for 2. The absence of the solvent coordinated intermediate in 2 is explained by the stronger Ru–O bond afforded by the lower conjugation in that extends onto the carboxylic acid in the 1-COO-iquo^?ligand, compared to that in the 3-COO-iqu^?ligand in 3. Transient absorption experiments also show that the ³MLCT excited state of 3 is able to reduce methyl viologen.     

A novel naphthalimide–glutathione chemosensor for fluorescent detection of Fe3+ and Hg2+ in aqueous medium and its application

By rationally introducing glutathione functionalized 1, 8–naphthalimide, a novel fluorescent chemosensor (NG) was successfully synthesized. NG can high selectively and sensitively recognize Fe³⁺/Hg²⁺ ions through quenching of fluorescence among all kinds of common metal ions in aqueous medium. The binding stoichiometry ratio of NG–Fe³⁺ is verified as 2:1and NG–Hg²⁺ as 1:2 confirmed by Job's plot method, FT-IR, ¹H NMR and ESI–MS spectrum, and the possible sensing mechanism were also proposed. The chemosensor NG toward Fe³⁺ and Hg²⁺ displays the excellent advantages of high selectivity and sensitivity, low detection limits (7.92?×?10^?8 and 4.22?×?10^?8?M), high association constants (3.37?×?10⁸ and 8.14?×?10⁴?M^?2), instataneous response (about 10s) and wide pH response range (3.0–8.0). Importantly, the chemosensor NG was successfully applied to determine Hg²⁺ in tap water. Meanwhile, the test strips based on NG were prepared, which could conveniently and efficiently detect Fe³⁺ and Hg²⁺. Moreover, the complex of NG and Fe³⁺ (NG–Fe³⁺) showed high selectivity and sensitivity for H₂PO₄￣ over many other anions in the same medium.     

A novel fluorescence sensor for K+ based on bis-Bodipy: The ACQ effect controlled by cation complexation of pseudo crown ether ring

Three novel bis-Bodipy 3a–3c bridged with crown ether chain were prepared in yields of 70–78%. Their complexation absorption and fluorescent spectra for fourteen metal ions suggested that compound 3b exhibited the selective response for K⁺ with obvious ACQ effect. The association constant of compound 3b with K⁺ was 4.3 × 10⁵ M^?1 and 1:1 complex mode was deduced. The complexation mechanism of ACQ effect controlled by cation complexation of pseudo crown ether ring was confirmed by the fluorescent titrations, complexation FT-IR spectra, complexation ¹H NMR spectra, complexation ESI-MS spectra and contrast experiment of similar mono-Bodipy derivative. The K⁺ was binded in the cavity of a pseudo crown ether ring, leading to the closed distance for two Bodipy units and then enhancing the ACQ effect obviously. Both the structure of the crown ether chain and two Bodipy units were decisive factors for the selective fluorescence sensor for K⁺.     

Enhancement of electrochemical performance and thermal compatibility of GdBaCo2/3Fe2/3Cu2/3O5+δ cathode on Ce1.9Gd0.1O1.95 electrolyte for IT-SOFCs

Transition-metal doped double-perovskite structure oxides GdBaCo_2/3Fe_2/3Ni_2/3O_5+δ (FN-GBCO), GdBaCo_2/3Fe_2/3Cu_2/3O_5+δ (FC-GBCO), GdBaCoCuO_5+δ (C-GBCO) and pristine GdBaCo₂O_5+δ (GBCO) were synthesized via a citrate combustion method. The thermal-expansion coefficient (TEC) and electrochemical performance of the oxides were investigated as potential cathodes for intermediate-temperature solid oxide fuel cells (IT-SOFCs). The TEC exhibited by the FC-GBCO cathode up to 900 °C is 14.6 × 10^?6 °C^?1, which is lower than the value of GBCO (19.9 × 10^?6 °C^?1). Area specific resistances (ASR) of 0.165 Ω cm² at 700 °C and 0.048 Ω cm² at 750 °C were achieved for the FC-GBCO cathode on a Ce_0.9Gd_0.1O_1.95 (CGO) electrolyte. An electrolyte supported (300 μm thick) single-cell configuration of FC-GBCO/CGO/Ni-CGO attained a maximum power density of 435 mW cm^?2 at 700 °C. The unique composition of GBCO co-doped with Fe and Cu ions in the Co sites exhibited reduced TEC and enhancement of electrochemical performance and good chemical compatibility with CGO, and this composition is proving to be a potential cathode for IT-SOFCs.     

Comparative study on energetic distortions of SO42− ions matrix-isolated in compounds with kröhnkite-type chains,K2Me(CrO4)2·2H2O and Na2Me(SeO4)2·2H2O (Me = Mg,Co, Ni,Zn, Cd)

Infrared spectra of compounds with kröhnkite-type infinite octahedral–tetrahedral chains, K₂Me(CrO₄)₂·2H₂O and Na₂Me(SeO₄)₂·2H₂O (Me = Mg, Co, Ni, Zn, Cd), as well as infrared spectra of the title double salts containing matrix-isolated SO₄^2? guest ions are presented and discussed in the regions of the X–O stretching modes.The SO₄^2? guest ions matrix-isolated in selenate and chromate matrices exhibit four infrared bands corresponding to the four site-group components of the stretching modes in good agreement with the low site symmetry of the host ions (C₁ site symmetry). The values of Δν₃ (site-group splitting) and Δν_max (the difference between the highest and the lowest wavenumbered components of the stretching modes) are used as an adequate measure for the extent of energetic distortion of the matrix-isolated SO₄^2? guest ions.The influence of different crystal-chemical parameters (Me²⁺–OXO₃ bond strengths, sizes of the Me²⁺ and Me⁺ ions, electronic configurations of the Me²⁺ ions, hydrogen bond strengths, and unit-cell volumes of the host compounds) on the extent of energetic distortion of both the host SeO₄^2? and CrO₄^2? ions, and the SO₄^2? guest ions is analyzed. Correlations between the values of Δν₃ and Δν_max of the guest ions and both the degree of covalency of the respective Me²⁺–OXO₃ bonds and the electronic configurations of the Me²⁺ ions have been found and will be discussed. For example, the energetic distortion of SO₄^2? ions included in the chromate lattices decreases in the order Zn > Cd > Mg as a result of the decreasing covalency of the respective Me²⁺–O bonds in the same order (Δν₃ have values of 73, 58 and 36 cm^?1, respectively). Furthermore, the values of Δν₃ and Δν_max are larger when the metal ions have CFSE ≠ 0 (crystal field stabilization energy, Co²⁺, Ni²⁺). These cations are more resistant to angular deformations of the MeO₆ octahedra (i.e. changes in the O–Me–O bond angles), thus facilitating the extent of distortion of the matrix-isolated SO₄^2? ions as compared to those having CFSE = 0 (Mg²⁺, Zn²⁺ and Cd²⁺). For example, Δν₃ and Δν_max of SO₄^2? ions matrix-isolated in K₂Zn(CrO₄)₂·2H₂O have values of 73 and 163 cm^?1, and 116 and 207 cm^?1 in Na₂Zn(SeO₄)₂·2H₂O, whereas in the respective nickel lattices Δν₃ and Δν_max have values of 88 and 173 cm^?1 (K₂Ni(CrO₄)₂·2H₂O) and 127 and 212 cm^?1 (Na₂Ni(SeO₄)₂·2H₂O).The SO₄^2? guest ions included in selenate matrices, Na₂Me(SeO₄)₂·2H₂O, are remarkably much distorted than in chromate ones, K₂Me(CrO₄)₂·2H₂O, as deduced from the values of Δν₃ and Δν_max owing to a stronger static field caused by the smaller Na⁺ ions as compared to that caused by the larger K⁺ ions. The smaller unit-cell volumes of the selenate host compounds, i.e. the higher repulsion potential at the lattice sites at which the guest ions are situated additionally favor the extent of energetic distortion of the sulfate guest ions in the selenate matrices.