Study on the rapid deswelling mechanism of comb-type N-isopropylacrylamide gels

The shrinking mechanism of comb-type grafted poly(N-isopropylacrylamide) gel was investigated by fluorescence spectroscopy and small-angle X-ray Scattering (SAXS). The SAXS reveals that the microdomain structure with characteristic dimension of 460 Å is developed in the comb-type grafted poly(N-isopropylacrylamide) gel during the shrinking process. Fluorescence spectroscopy together with SAXS observation suggests that the freely mobile characteristics of the grafted chains are expected to show the rapid dehydration to make tightly packed globules with temperature, followed by the subsequent hydrophobic intermolecular aggregation of the dehydrated graft chains. The dehydrated grafted chains created the hydrophobic cores, which enhance the hydrophobic aggregation of the networks. These aggregations of the NIPA chains contribute to an increase in void volume, which allow the gel having a pathway of water molecules by the phase separation.     

Fast swelling/deswelling kinetics of comb-type grafted poly(N-isopropylacrylamide) hydrogels

The synthesis and characterization of comb-type grafted thermo-sensitive hydrogels is presented. These hydrogels were synthesized by polymerization of N-isopropylacrylamide (IPAAm) with a PIPAAm macromonomer. This process leads to a crosslinked IPAAm backbone polymer, copolymerized with highly mobile comb-type PIPAAm chains. These new thermo-responsive copolymers displayed higher equilibrium swellings at lower temperatures and rapid deswelling kinetics at elevated temperatures. The swelling/deswelling for comb-type gels is dependent on the graft chain lengths, in contrast to normal PIPAAm gel lacking the graft chains. As the temperature is increased above the critical temperature, the dehydrated graft chains aggregated due to hydrophobic attraction. Rapid and reversible kinetics of the graft-type gel were observed in response to stepwise temperature changes within short time cycles: phenomena not observed in normal crosslinked thermo-sensitive gels. The influence of freely mobile graft chains on both the equilibrium and dynamic properties of comb-type PIPAAm gel is demonstrated. Possible application of graft-type gel is discussed for actuator systems.     

Swelling–shrinking behaviors of poly(N-isopropylacrylamide) and poly(N-n-propylacrylamide) gels prepared by chemical and radiation crosslinking methods

The swelling and shrinking kinetics of thermosensitive gels based on N-isopropylacrylamide (NiPAAm) and N-n-propylacrylamide (NnPAAm) were studied. Four gels cylindrical in shape were prepared by two different methods: γ-ray irradiation to aqueous solutions of poly(NiPAAm) (PNiPAAm) or poly(NnPAAm) (PNnPAAm) and redox polymerization of NiPAAm or NnPAAm monomer using N,N′-methylenebisacrylamide as a crosslinker. There were a few differences in the swelling kinetics among these gels. However, a marked difference was observed in the shrinking processes, the rate of which was faster in the order of radiation-crosslinked PNiPAAm gel > radiation-crosslinked PNnPAAm gel > chemically crosslinked PNnPAAm gel > chemically crosslinked PNiPAAm gel. This difference was discussed in terms of the microscopic structure of the gels, which was studied by light scattering techniques. It was found that the static inhomogeneities frozen in the chemically and radiation-crosslinked gels play a key role in their shrinking kinetics.     

Structural observation of heterogeneous poly(N-isopropyl acrylamide-co-acrylic acid) hydrogels in highly hydrated states

Heterogeneous hydrogels were prepared by -ray irradiation of aqueous solutions of N-isopropylacrylamide (NIPAAm) and acrylic acid (AAc) having various compositions above the lower critical solution temperature. The structures of the poly(N-isopropylacrylamide) (PNIPAAm) gel and poly(NIPAAm-co-AAc) gels in both their highly hydrated and their natural states were observed by environmental scanning electron microscopy. The heterogeneous structures of the homopolymer gel and the copolymer gels whose AAc contents were between 10–50% consisted of interconnected microspheres. In the copolymer gel with a high AAc content, the structure became a largely interconnected one which lacked micro-droplets. The hydrophobic interaction caused by hydrogen bonding between the unionized carboxylic acid groups of AAc and the amide groups of NIPAAm, the rates of polymerization, and the aggregation rates play important roles in the formation of interconnected microsphere gel structures.     

Decorating Multi-Walled Carbon Nanotubes with Temperature-Responsive Polymer Shells via Surface-Initiated Redox Polymerization

The temperature-responsive multi-walled carbon nanotubes (MWCNTs) were prepared by decorating MWCNTs with poly(N-isopropylacrylamide) (PNIPAM) chains via surface-initiated redox polymerization. Chemical structure of resulting product and the quantities of grafted polymer were determined by FT-IR and TGA. TEM and FE-SEM images clearly indicate that the nanotubes were coated with a PNIPAM layer. DSC analysis indicates that the functionalized MWCNTs can respond to temperature, because of the hydrophilic and hydrophobic transformation of the bonded PNIPAM chains at 30–35°C.     

The kinetics of poly(N-isopropylacrylamide) microgel latex formation

Conversion versus time curves were measured for poly(N-isopropylacrylamide) microgel latexes prepared by polymerization in water with sodium dodecyl sulfate, SDS. Polymerization rates increased with temperature with methylenebisacrylamide crosslinking monomer consumed faster thanN-isopropylacrylamide. The particle diameter decreased with increasing concentrations of SDS in the polymerization recipe and there was evidence that the rate of polymerization increased somewhat with SDS concentration. Particle formation occurred by homogeneous nucleation as micelles were absent.Comparison of particle size distributions from dynamic light scattering to those from a centrifugal sizer led to the conclusion that larger particles within a specific latex were less swollen with acetonitrile than were the smaller ones. This was interpreted as evidence for the polymer in larger particles having a higher crosslink density. Particle swelling was estimated from swelling ratios defined as the particle volume at 25 °C divided by the volume at 50 °C. In the absence of crosslinking poly(N-isopropylacrylamide) linear chains would disolve at 25 °C. The swelling results indicated that the average crosslink density in the particles decreased with conversion. This was explained by the observation that the methylenebisacrylamide was consumed more quickly and is typical of crosslinking in emulsion polymerization where polymer particles have high polymer concentrations at their birth.     

Cyclodextrin gels which have a temperature responsiveness

β-Cyclodextrin (CD) gels crosslinked by epichlorohydrin (CD-gel) were modified with poly(N-isopropylacrylamide) (PIPA; M_n 4900) chains. The CD residue in the gel associated with 8-anilino-1-naphthalenesulfonic acid (ANS) more strongly than the free PIPA-carrying CD. The van't Hoff plot for complexation of ANS with the gel drifted largely from linear relationship above the coil-globule transition temperature of individual PIPA chains. Furthermore, a relatively more significant temperature effect on the stereoselective adsorption of phenylalanine to the CD gel was observed by the modification with PIPA chains. These results imply that the ability of the CD-gel–PIPA conjugate to form inclusion complex could be skillfully controlled by temperature. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1535–1541, 1997     

Preparation and characterization of thermoresponsive isopropylacrylamide–hydroxyethylmethacrylate copolymer gels

A random copolymer of N-isopropylacrylamide and 2-hydroxyethylmeth-acrylate, poly(NIPAM-co-HEMA), having thermoresponsive character was prepared bya redox copolymerization method. Poly(ethylene glycol), PEG 4000 was included in the copolymerization recipe to increase the thermoresponsivity of copolymeric structure. Poly(NIPAM-co-HEMA) copolymer gels having more elastic character and higher mechanical strength relative to poly(NIPAM) gel could be achieved by the proposed copolymerization procedure. The equilibrium and dynamic response against the temperature were investigated for the gel matrices produced by changing the initial NIPAM/HEMA mol ratio and PEG 4000 concentration in the copolymerization mixture. The effective diffusion coefficient of water within the gel matrix was estimated for either swollen or shrunken states by applying an unsteady-state diffusion model on the dynamic swelling and shrinking behaviors of gel matrix prepared in the cylindrical form. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 527–541, 1998     

Synthesis of thermoresponsive polystyrene-based comb-type grafted poly( N -isopropylacrylamide)

Narrowly distributed polystyrene-g-p(N-isopropylacrylamide) (PSt-g-PNIPAM) was prepared by atom transfer radical polymerization (ATRP) of N-isopropylacrylamide using the brominated polystyrene as macroinitiator and CuCl combined with hexamethyltriethylenetetramine as catalyst. Fourier transform infrared (FT-IR) spectroscopy and nuclear magnetic resonance (NMR) spectroscopy confirmed the structure of PSt-g-PNIPAM. The gel permeation chromatography (GPC) showed that the graft copolymer had a single distribution peak with molecular weight, M _n (g/mol) of 19815 g/mol (using polystyrene as the standard). Differential scanning calorimetry (DSC) revealed that due to both effects of hydrophobic isopropyl groups and hydrogen bonds in the amide group, the glass transition temperature (T _g) of PSt-g-PNIPAM enhanced 16.0°C compared to the T _g of the polystyrene.     

Microporous,Thermosensitive Organic-Inorganic Hybrid Hydrogel Prepared by Freezing

Thermally triggered shrinking rates of poly(N-isopropyl-acrylamide) (PNIPA) -based organic-inorganic hydrogel could be accelerated by applying the ice templating method. Freezing and subsequent rehydration of gels is an effective way to prepare the porous polymer network that leads to rapid expelling of pore water. The shrinking coefficients obtained by fitting Fick's law to the data increased two orders of magnitude as compared with the conventional gel before freezing. The microstructure of gels generated during freezing gels had advantage to expel the pore water rapidly probably due to the PNIPA aggregation through the hydrophobic interaction.     

Thermo-responsive extraction of cadmium(II) ion with TPEN-NIPA gel. Effect of the number of polymerizable double bond toward gel formation and the extracting behavior

N,N,N′,N′-(Tetrakis-2-pyridylmethyl)ethylenediamine (TPEN) derivatives bearing the different number (1-4) of a double bond moiety on the pyridine ring are synthesized and subjected to copolymerization with N-isopropylacrylamide in the presence of AIBN. The obtained poly(TPEN-NIPA) gels show thermo-responsive swelling/shrinking behaviors and are employed for the extraction of cadmium(II) ion from the aqueous solution to examine the relationship of the gel characteristics and the extraction performance. The polymer gels composed of the TPEN derivative bearing three or four double bonds exhibit temperature-dependent change of swelling and shrinking in water. These gels extract Cd^II ion efficiently from the aqueous solution in the swelling state at 5 °C, while little extraction was observed at 45 °C with shrinking.     

Synthesis and characterization of thermoresponsive poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-<Emphasis Type="Italic">N</Emphasis>-hydroxymethylacrylamide-co-2-hydroxyethyl methacrylate) hydrogels

Thermoresponsive hydrogels based on N-isopropylacrylamide, N-hydroxymethylacrylamide, and 2-hydroxyethyl methacrylate, poly(NIPAM–co-NHMAAm–co-HEMA), have been synthesized and their swelling—deswelling behavior studied as a function of NIPAM concentration, NIPAM/NHMAAm and NIPAM/HEMA mole ratio, and total monomer concentration. Copolymers varying in composition have been obtained by redox copolymerization of these three monomers. Temperature has been changed in the ranges from 4 to 70 °C at fixed pH and total ionic strength. Equilibrium swelling ratio, dynamic swelling ratio, and dynamic deswelling ratio were evaluated for all hydrogel systems. The equilibrium swelling ratios of the copolymeric gels decrease with increasing NHMAAm and HEMA content. The formation of the intermolecular hydrogen bonding between hydroxyl and amido groups decreases the hydrophilic group numbers of the gel and the affinity of the gel towards water decreases. The copolymer gels also showed rapid volume transitions with time. The time required for equilibrium shrinking increased with increasing NHMAAm and HEMA content in the gel.     

Preparation and properties of thermosensitive hydrogel microcapsules

Temperature-sensitive hydrophilic gel microcapsules have been newly prepared. That is, poly ( -lysineisopropylamide–terephthalic acid) microcapsules containing water have been obtained by an interfacial polymerization at a water/oil interface between -lysineisopropylamide and terephthaloyldichloride. The microcapsule changes its size between 33 and 35°C. Under 33°C, the microcapsules are fully spherical and can be redispersed in distilled water, while are aggregated above 35°C. The microcapsules, which are observed to show aggregation above 33°C, can be redispersed by decreasing temperature within a few second. The thermosensitive morphological changes of the microcapsules are thus reversible. Also, it has been shown that the permeability of sodium chloride through the microcapsule membrane changes remarkably between 33 and 35°C, while it is kept almost constant independent of temperature between 25 and 33°C or between 35 and 55°C. The permeability of solutes is higher under 33°C than that above 35°C. Such thermosensitive properties result from the fact that the polymer membrane has isopropylamide groups. That is, -lysineisopropylamide has a chemical structure similar to N-isopropylacrylamide, the polymer of which, poly (N-isopropylacrylamide), is a thermosensitive hydrogel having its phase transition temperature around 33°C.     

Monodisperse thermosensitive particles prepared by emulsifier-free emulsion polymerization with microwave irradiation

The emulsifier-free emulsion polymerization of styrene (St) and N-isopropylacrylamide (NIPAAm) was successfully carried out with microwave irradiation, and the monodisperse thermoresponsive poly(styrene-co-N-isopropylacrylamide) (poly(St-co-NIPAAm)) particles with diameters in the range 100–130 nm were prepared. The morphology, size and size distribution of the poly(St-co-NIPAAm) particles were characterized by transmission electron microscopy, scanning electron microscopy (SEM) and photon correlation spectroscopy (PCS), respectively. The results showed that poly(St-co-NIPAAm) particles had spherical morphology, and the poly(St-co-NIPAAm) particles prepared by emulsifier-free emulsion polymerization with microwave irradiation were smaller, more uniform than those obtained with conventional heating. The hydrodynamic diameters of poly(St-co-NIPAAm) particles were decreased as the temperature increased from 25 °C to 40 °C, and poly(St-co-NIPAAm) particles collapsed remarkably at 32 °C, which is the lower critical solution temperature of the poly(N-isopropylacrylamide). The morphology of the assembled poly(St-co–NIPAAm) particles was observed by SEM, it was found that monodisperse poly(St-co-NIPAAm) particles could assemble to form the two-dimensional order structures.     

Bistable photoswitching in poly(N-isopropylacrylamide) with spironaphthoxazine hydrogel for optical data storage

A bistable switching photochromic poly(N-isopropylacrylamide) with spironaphthoxazine hydrogel copolymer (PNIPA-SPO-BIS) has been designed and synthesized by radical polymerization. The PNIPA-SPO-BIS copolymer is identified by ¹H NMR spectroscopy, FIT-IR spectroscopy and gel permeation chromatography (GPC). The morphology of the internal microstructures of the PNIPA-SPO-BIS hydrogels was observed by scanning electron microscopy (SEM). The PNIPA-SPO-BIS copolymer showed excellent photochromic behavior in water solution and in gel state. In addition, erasable and rewritable (EARW) photoimaging on the PNIPA-SPO-BIS hydrogel was successfully demonstrated. A novel optical data storage materials based on photochromic hydrogel was developed. These developments are crucial for fundamental studies and eventual technical application for all-photo mode high-density optical data storage.     

Synthesis,characterization and the rapid response property of the temperature responsive PVP-g-PNIPAM hydrogel

In this study, a poly(N-vinylpyrrolidone)-graft-poly(N-isopropylacrylamide) hydrogel (PVP-g-PNIPAM) was synthesized through the “grafting from” process. Grafting of temperature responsive poly(N-isopropylacrylamide) (PNIPAM) brushes was carried out from the poly(N-vinylpyrrolidone) (PVP) synthesized with free radical polymerization and functionalized with ATRP initiator, PVP–Br, which was performed through a bromination reaction between pendant allylic groups of the PVP and N-bromosuccinimide (NBS). The structure of the initiator and PVP-g-PNIPAM was characterized by ultraviolet and visible (UV/Vis) absorption, nuclear magnetic resonance (NMR) spectroscopy and Fourier transform infrared (FTIR) measurements. Scanning electron microscope (SEM) morphology measurement displayed some dendritic grafted chains dangling onto the pore wall of the hydrogel.The characteristic in response to the change in environmental temperature was investigated by the fluorescence anisotropy and UV/Vis transmittance measurements. The results showed that the PVP-g-PNIPAM hydrogel exhibited rapid response to the change in environmental temperature due to free and mobile graft chains compared with the P(VP-co-NIPAM) hydrogel, which was prepared by free radical copolymerization in this work.     

Carbon black/alumina gel composite: Preparation by sol-gel process in the presence of polymer-grafted carbon black and its electric properties

The preparation of a novel carbon black/alumina gel composite by sol-gel reaction of aluminum isopropoxide (AIP) was investigated. When sol-gel reaction of AIP was carried out in the presence of untreated carbon black, a thin film of alumina gel was hardly obtained, because of the presence of aggregated carbon blacks. On the contrary, in the presence of poly(N-vinyl-2-pyrrolidone)-grafted, poly(2-methyl-2-oxazoline)-grafted, and poly(N,N-diethylacrylamide)-grafted carbon black, a deep-black, thin film of alumina gel, in which carbon blacks were uniformly incorporated, was obtained. Carbon black was incorporated into an alumina gel matrix by the hydrogen bond between carbonyl groups of the grafted polymer and the residual hydroxyl groups in the alumina gel. Electric resistance of the polymer-grafted carbon black/alumina gel composite was very sensitive to the vapor of solvents of the grafted polymer chains on carbon black surface: the electric resistance of the composite drastically decreased in humidity and N,N-dimethylformamide vapor, but not in n-hexane vapor. The logarithm of electric resistance of polymer-grafted carbon black/alumina gel composite linearly decreased in proportion to relative humidity. In addition, the electric resistance of poly(N,N-diethylacrylamide)-grafted carbon black/alumina gel composite under humidity decreased drastically at 32°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3591–3597, 1999     

Characterization of N-isopropyl acrylamide/acrylic acid grafted polypropylene nonwoven fabric developed by radiation-induced graft polymerization

Radiation-induced graft copolymerization of N-isopropylacrylamide (NIPAAm) and acrylic acid (AA) mixture was carried out on polypropylene nonwoven fabric to develop a thermosensitive material and has been found to affect the thermal and physical characteristics of fabric. The grafted fabrics with different monomer ratios were characterized by thermal gravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), contact angle and atomic force microscopy (AFM). Results of FTIR clearly indicated that poly(acrylic acid) and poly(N-isopropyl acrylamide) were successfully grafted onto the membrane surface. TGA results showed that the thermal stability of PP fabric increased after grafting of NIPAAm/AA. The crystallinity values from DSC and XRD were found to decrease with increase in degree of grafting because of the addition of grafted chains within the noncrystalline region. The decrease in contact angles of the grafted fabric with an increase of the degree of grafting shows that PNIPAAm/PAA exists as the hydrophilic component. The increase in surface roughness after grafting was observed by AFM.     

Relationship between the hydration degree of poly-N-isopropylacrylamide gel and activity of immobilized α-chymotrypsin

The influence of the pH, temperature, and dimethyl sulfoxide concentration on the hydration degree of the poly-N-isopropylacrylamide gel and the activity of -chymotrypsin immobilized into the polymer was studied. The behavior of more hydrophilic preparations based on polyacrylamide and copolymer of acrylamide and acrylic acid was studied for comparison. An increase in both the temperature and dimethyl sulfoxide content decreases the hydration of the poly-N-isopropylacrylamide, which correlates with a decrease in the activity of the immobilized enzyme. The use of substrates with different structures and an irreversible inhibitor proves that the change in the properties of -chymotrypsin immobilized into the poly-N-isopropylacrylamide gel is related to the change in the rate constants of enzymatic reactions. Comparison of all experimental data obtained suggested an opportunity of local interactions between the protein globule and polymeric chains with a change in the hydration degree of poly-N-isopropylacrylamide during its phase transition.     

Prepation of poly(N-isopropylacrylamide)-grafted silica gel and its temperature-dependent interaction with proteins

Poly(N-isopropylacrylamide) oligomer was immobilized onto a silica gel surface. The gel adsorbed a hydrophobic protein γ-globulin (IgG) at 37°C, however, did not adsorb IgG at 24°C. The adsorbed IgG at 37°C was adsorbed by lowering the temperatue, No adsorption of a hydrophilic protein bovin serum albumin (BSA) onto this matrix was observed at 37°C nor 24°C.