共查询到20条相似文献,搜索用时 328 毫秒
1.
珠光体材料由许多随机取向的珠光体团组成,每一珠光体团又由铁素体片和渗碳体片交替
叠合而成. 实验表明具有较小片层间距的珠光体材料具有较高的强度和寿命. 通过分析构成
珠光体团的各相及界面的损伤特征,利用损伤耗散功的概念,得到了铁素体、渗碳体与界面
损伤的具有统一形式的演化规律,将其嵌入基于细片层微结构和非经典塑性理论的珠光体团
的弹塑性本构方程,利用Hill自洽方法,得到了珠光体材料的损伤本构描述. 所得到的损
伤本构描述显含表征微结构特征的片层间距,容易证明具有较小片层间距的珠光体材料具有
较好的综合力学性能. 对珠光体材料的拉伸和循环拉压特性进行了分析,得到了与实验一
致的结果. 相似文献
2.
3.
4.
流体边界层上电磁力的控制效应研究 总被引:13,自引:1,他引:13
利用作用于流体边界层上的电磁体积力改变流体边界层的结构,研究电磁力对流场的控制
作用效果. 电极与磁极交替分布的电磁场激活板包覆在圆柱体表面置于流动的电解质溶液
中,产生的电磁力沿圆柱体表面分布,可以改变流体边界层的结构,从而实现对流场的控制.
用电磁屏蔽和时域控制的方法调整电磁力的时空分布参数,圆柱绕流分离点可以在前驻点和
后驻点之间变动,产生不同的控制效果. 流体边界层上的电磁力能连续控制圆柱绕流、尾流
涡街的形态. 正向电磁力具有较好的消涡、减震和减阻控制效应. 反向电磁力具有明显的增
涡控制效应,具有较强的制动控制效应,此时圆柱体表面涡量分布的对称性和稳定性被破坏. 相似文献
5.
基于相平均方法的折射绕射联合波浪模型 总被引:1,自引:0,他引:1
近岸带波浪运动的研究具有很重要的工程意义,近年来已获得了较丰硕的研
究成果并发展了许多波浪模型,而基于不同理论的波浪模型往往具有特定的适用性. 在海岸
工程中应用比较广泛的一类波浪模型以波能(波作用量)守恒为基本依据,如SWAN模型. 该
类模型在实际工程中已经得到了大量的应用,但该类模型未计及波浪绕射效应,成为其突出
的缺陷之一. 如何对模型做适当的改进,使之适用于波浪绕射的模拟,从而在原有基础上拓
广模型的应用范围是一项具有实际意义的研究工作. 该文采用波能(波作用量)守恒方程描
述近岸带波浪运动,通过引入绕射因子,得到折射、绕射联合波浪模型,从而拓广了模型的
应用范围. 通过实际算例验证,表明所建立的模型计及了波浪折射、绕射作用,对相平
均波浪模型在波浪绕射效应模拟方面的改进具有一定的意义. 相似文献
6.
利用ANSYS有限元方法分析了一系列的肋板,研究了加强肋的作用,提出了
优化肋设计的限制条件. 结果表明,由横向肋板产生的栅格数目不能小于肋板的长宽比. 换
句话说,横向加强肋必须把平板的长度划分为小于等于宽度的段. 结果还显示,加强肋的优
化几何特性与板的屈曲从整体模态到局部模态转变点相应. 而且,所有具有相似长宽比和肋
数的肋板,具有一个特定的比值$EI_{s}/aD$, 此时抗剪应力最佳. 相似文献
7.
太阳帆日心悬浮轨道附近的相对运动 总被引:2,自引:0,他引:2
研究悬浮轨道附近的编队飞行问题,推导了悬浮轨道附近的相
对运动方程. 由于编队太阳帆之间的距离与帆到太阳的距离的比值为小量,将相对运动方程
在悬浮轨道附近线性化,得到了线性化方程. 基于该线性化方程,考虑了悬浮轨道附近的几
种编队控制方法,只需通过调节太阳帆的姿态来进行简单的控制. 其中包括一种被动编队控
制策略,该控制策略具有实现简单、稳定区域大的特点,具有很好的工程应用前景. 最后基
于非线性方程对每种编队策略进行了数值仿真验证,数值结果表明该控制方法能实现编
队. 相似文献
8.
岩质圆形隧洞围岩应力场弹塑性新解 总被引:1,自引:0,他引:1
针对动态接触问题的有限元并行计算,提出了一种新的接触算法. 新算法引入局部拉氏
乘子技术来计算接触力. 由于同时考虑了无穿透的接触约束条件和相邻接触对的相互影响,
较之广泛使用的罚参数法,新算法使接触约束条件和系统平衡方程得到更充分的满足. 虽然
为提高接触计算精度而在局部采用了迭代技术,但算法仍然具有较高的效率,且与显式时间
积分方案完全相容. 此外,通过构造专门的区域分解方案,实现了将现有为串行程序开发的
搜索算法平滑移植到并行环境的目标. 数值算例表明,所提出的接触算法具有很好的并行性,
在保证了接触问题并行计算精度的同时,取得了满意的并行效率. 相似文献
9.
基于Erdogan基本解边界元法计算应力强度因子 总被引:4,自引:0,他引:4
引入含裂纹问题基本解(Erdogan基本解),提出了基于Erdogan基本解的样条虚边界
元法,并阐述了该法在实施过程中的特点与具体做法. 采用该方法详细分析了若干
典型裂纹问题,全面考察了方法的计算精度和收敛情况,以及在求解复杂裂纹问题方面
的能力. 结果显示,该方法具有精度高、收敛快、计算能力强等优点,是裂纹问题分析中
一种具有竞争力的通用计算方法. 相似文献
10.
MAX相涂层是一类兼具陶瓷和金属性能的层状结构材料,具有优异的抗氧化和抗腐蚀性能,同时M位元素丰富,在宽温域摩擦过程中生成具有润滑作用的M基氧化物,受到广泛关注.本文中选择可生成V基Magnéli润滑相的V2AlC体系,采用电弧复合磁控溅射技术结合后续热处理制备高纯V2AlC MAX相涂层,并系统研究该涂层在室温~700℃宽温域下的摩擦磨损机理.研究发现,涂层在300和500℃时摩擦形式主要以黏着磨损和磨粒磨损为主.当环境温度高于600℃时,V的外扩散和氧化导致涂层表面生成层状V2O5润滑相,在600℃时形成连续的润滑膜,从而使V2AlC涂层具有最佳的摩擦学性能.同时,保留的V2AlC主相在摩擦过程中起承载作用,降低涂层的磨损率. 相似文献
11.
带源参数的二维热传导反问题的无网格方法 总被引:1,自引:1,他引:1
利用无网格有限点法求解带源参数的二维热传导反问题,推导了相应的离散方程. 与
其它基于网格的方法相比,有限点法采用移动最小二乘法构造形函数,只需要节点信息,不
需要划分网格,用配点法离散控制方程,可以直接施加边界条件,不需要在区域内部求积分.
用有限点法求解二维热传导反问题具有数值实现简单、计算量小、可以任意布置节点等优点.
最后通过算例验证了该方法的有效性. 相似文献
12.
A hybrid vortex method was developed to simulate the two-dimensional viscous incompressible flows over a bluff body numerically. It is based on a combination of the diffusion–vortex method and the vortex-in-cell method by dividing the flow field into two regions. In the region near the body surface the diffusion–vortex method is used to solve the Navier–Stokes equations, while the vortex-in-cell method is used in the exterior domain. Comparison with results obtained by the finite difference method, other vortex methods and experiments shows that the present method is well adapted to calculate two-dimensional external flows at high Reynolds number. It is capable of calculating not only the global characteristics of the separated flow but also the evolution of the fine structure of the flow field with time precisely. The influence of the grid system and region decomposition on the results will also be discussed. © by 1997 John Wiley & Sons, Ltd. 相似文献
13.
The use of multigrid methods in complex fluid flow problems is recent and still under development. In this paper we present a multigrid method for the incompressible Navier-Stokes equations. The distinctive features of the method are the use of a pressure-correction method as a smoother and a novel continuity-preserving manner of grid coarsening. The shear-driven cavity problem is used as a test case to demonstrate the efficiency of the method. 相似文献
14.
针对守恒形式的欧拉方程组, 构造了一种结合Roe格式的守恒型有限体
积形式的半拉氏方法. 通过发展一种基于Roe特征速度的拉氏质点回溯方法, 由此来计算
半点的流量并作为边界通量的近似, 使得这种半拉氏方法在时空离散上达到二阶精度, 并
且保证了守恒性. 其中回溯点处物理量采用本质无振荡格式(ENO)方法进行插值重
构得到, 不需要增加人工黏性且避免了有限体积多矩半拉氏方法中限制器选择的问题, 又能够达到时空的高阶精度.
方法简便, 易于实现, 兼具拉氏方法和欧拉方法的优点. 一维和二维数值算例表明,
此方法对激波和接触间断都取得了满意的模拟效果, 可用于可压缩复杂流动问题的计算. 相似文献
15.
16.
17.
E. D. De Goede 《国际流体数值方法杂志》1991,13(4):519-534
In this paper we describe a time-splitting method for the three-dimensional shallow water equations. The stability of this method neither depends on the vertical diffusion term nor on the terms describing the propagation of the surface waves. The method consists of two stages and requires the solution of a sequence of linear systems. For the solution of these systems we apply a Jacobi-type iteration method and a conjugate gradient iteration method. The performance of both methods is accelerated by a technique based on smoothing. The resulting method is mass-conservative and efficient on vector and parallel computers. The accuracy, stability and computational efficiency of this method are demonstrated for wind-induced problems in a rectangular basin. 相似文献
18.
19.
Cell mapping methods, in general, provide a computationally efficient way to analyze the long-term global dynamics of lower-dimensional systems. The multi-degrees-of-freedom cell mapping (MDCM) method, in particular, overcomes the scaling limitations of other cell mapping methods, allowing efficiency benefits to be realized for higher-dimensional systems. Unfortunately, the sequential structure of the MDCM algorithm limits the ability to utilize the parallel processing capabilities of modern computers. In this paper, the parallelized multi-degrees-of-freedom cell mapping (PMDCM) method is introduced. The PMDCM method features a restructured algorithm that employs parallel computation to streamline one of the most time-consuming elements: numerical integration. The PMDCM algorithm is described in detail and is demonstrated by comparing results produced by the PMDCM method to those produced by MDCM and the grid-of-starts. By using the PMDCM method on a quad-core processor with 100 simultaneous integrations per mapping step, the total computation time is reduced by 93 %, as compared with the MDCM method. With PMDCM, the global integrity measure also agrees more closely with the computationally intensive grid-of-starts method when compared with the MDCM method. 相似文献
20.
A note on delta-perturbation expansion method 总被引:1,自引:0,他引:1
何吉欢 《应用数学和力学(英文版)》2002,23(6):634-638
IntroductionRecentlyBenderetal.[1]proposedanewperturbationtechniquebasedonanartificialparameterδ .Theideaisquitesimple .Consider,forexample ,theDuffingequationwithoutasmallparameteru″+u+ 1 0u3=0 . Wereplacethenonlinearu3byanothertermu1+δ,whichcontainstheparamete… 相似文献