Photoinduced charge separation in three-layer supramolecular nanohybrids: fullerene-porphyrin-SWCNT

Photoinduced charge separation processes of three-layer supramolecular hybrids, fullerene-porphyrin-SWCNT, which are constructed from semiconducting (7,6)- and (6,5)-enriched SWCNTs and self-assembled via π-π interacting long alkyl chain substituted porphyrins (tetrakis(4-dodecyloxyphenyl)porphyrins; abbreviated as MP(alkyl)(4)) (M = Zn and H(2)), to which imidazole functionalized fullerene[60] (C(60)Im) is coordinated, have been investigated in organic solvents. The intermolecular alkyl-π and π-π interactions between the MP(alkyl)(4) and SWCNTs, in addition, coordination between C(60)Im and Zn ion in the porphyrin cavity are visualized using DFT calculations at the B3LYP/3-21G(*) level, predicting donor-acceptor interactions between them in the ground and excited states. The donor-acceptor nanohybrids thus formed are characterized by TEM imaging, steady-state absorption and fluorescence spectra. The time-resolved fluorescence studies of MP(alkyl)(4) in two-layered nanohybrids (MP(alkyl)(4)/SWCNT) revealed efficient quenching of the singlet excited states of MP(alkyl)(4) ((1)MP*(alkyl)(4)) with the rate constants of charge separation (k(CS)) in the range of (1-9) × 10(9) s(-1). A nanosecond transient absorption technique confirmed the electron transfer products, MP˙(+)(alkyl)(4)/SWCNT˙(-) and/or MP˙(-)(alkyl)(4)/SWCNT˙(+) for the two-layer nanohybrids. Upon further coordination of C(60)Im to ZnP, acceleration of charge separation via(1)ZnP* in C(60)Im→ZnP(alkyl)(4)/SWCNT is observed to form C(60)˙(-)Im→ZnP˙(+)(alkyl)(4)/SWCNT and C(60)˙(-)Im→ZnP(alkyl)(4)/SWCNT˙(+) charge separated states as supported by the transient absorption spectra. These characteristic absorptions decay with rate constants due to charge recombination (k(CR)) in the range of (6-10) × 10(6) s(-1), corresponding to the lifetimes of the radical ion-pairs of 100-170 ns. The electron transfer in the nanohybrids has further been utilized for light-to-electricity conversion by the construction of proof-of-concept photoelectrochemical solar cells.     

胶束辅助的酞菁给体-碳纳米管受体超分子自组装及光诱导长寿命电荷分离态

利用十二烷基硫酸钠(SDS)阴离子胶束能够稳定分散单壁碳纳米管(SWCNT)和解聚富集四磺酸锌酞菁(ZnPcS₄)的能力, 组装了ZnPcS₄-SWCNT的电子给体-受体对来模拟光合作用的原初电子转移过程. 用稳态和时间分辨荧光法研究了相应的给体-受体分子间和分子内的光诱导电子转移速率, 用激光闪光光解技术检测了生成的电荷分离态. ZnPcS₄-SWCNT的电子给体-受体组装体在707 nm处出现了基态特征吸收峰, 但是复合体不产生荧光, 这主要归因于有效的分子内光诱导电子转移过程. 瞬态吸收光谱检测到相应的离子对, 动力学衰减结果表明, 电荷分离态的寿命长达42 μs. 这一长寿命电荷分离态的形成, 主要是因为ZnPcS₄是良电子给体(低氧化电位), SWCNT是好的电子受体, 使得三重态电子转移能够发生, 生成三重态电荷分离态.     

Tetrathiafulvalene-based nanotweezers-noncovalent binding of carbon nanotubes in aqueous media with charge transfer implications

Electron donor-acceptor hybrids based on single wall carbon nanotubes (SWCNT) are one of the most promising functional structures that are currently developed in the emerging areas of energy conversion schemes and molecular electronics. As a suitable electron donor, π-extended tetrathiafulvalene (exTTF) stands out owing to its recognition of SWCNT through π-π stacking and electron donor-acceptor interactions. Herein, we explore the shape and electronic complementarity between different types of carbon nanotubes (CNT) and a tweezers-shaped molecule endowed with two exTTFs in water. The efficient electronic communication between semiconducting SWCNT/multiwall carbon nanotubes (MWCNT), on one hand, and the water-soluble exTTF nanotweezers 8, on the other hand, has been demonstrated in the ground and excited state by using steady-state as well as time-resolved spectroscopies, which were further complemented by microscopy. Importantly, appreciable electronic communication results in the electronic ground state having a shift of electron density, that is, from exTTFs to CNT, and in the electronic excited state having a full separation of electron density, that is oxidized exTTF and reduced CNT. Lifetimes in the range of several hundred picoseconds, which were observed for the corresponding electron transfer products upon light irradiation, tend to be appreciably longer in MWCNT/8 than in SWCNT/8.     

Double‐Wall Carbon Nanotube–Porphyrin Supramolecular Hybrid: Synthesis and Photophysical Studies

Double‐wall carbon nanotubes (DWCNTs) with pyridyl units covalently attached to the external wall through isoxazolino linkers and carboxylic groups that have been esterified by pentyl chains are synthesized. The properties of these modified DWCNTs are then compared with an analogous sample based on single‐wall carbon nanotubes (SWCNTs). Raman spectroscopy shows the presence of characteristic radial breathing mode vibrations, confirming that the samples partly retain the integrity of the nanotubes in the case of DWCNTs, including the internal and external nanotubes. Quantification of the pyridyl content for both samples (DWCNT and SWCNT derivatives) is based on X‐ray photoelectron spectroscopy and thermogravimetric profiles, showing very similar substituent load. Both pyridyl‐containing nanotubes (DWCNTs and SWCNTs) form a complex with zinc porphyrin (ZnP), as evidenced by the presence of two isosbestic points in the absorption spectra of the porphyrin upon addition of the pyridyl‐functionalized nanotubes. Supramolecular complexes based on pyridyl‐substituted DWCNTs and SWCNTs quench the emission and the triplet excited state identically, through an energy‐transfer mechanism based on pre‐assembly of the ground state. Thus, the presence of the intact inner wall in DWCNTs does not influence the quenching behavior, with respect to SWCNTs, for energy‐transfer quenching with excited ZnP. These results sharply contrast with previous ones referring to electron‐transfer quenching, in which the double‐wall morphology of the nanotubes has been shown to considerably reduce the lifetime of charge separation, owing to faster electron mobility in DWCNTs compared to SWCNTs.     

Electron transfer cascade by organic/inorganic ternary composites of porphyrin, zinc oxide nanoparticles, and reduced graphene oxide on a tin oxide electrode that exhibits efficient photocurrent generation

A bottom-up strategy has been developed to construct a multiple electron transfer system composed of organic/inorganic ternary composites (porphyrin, zinc oxide nanoparticles, reduced graphene oxide) on a semiconducting electrode without impairing the respective donor-acceptor components. The hierarchical electron transfer cascade system exhibited remarkably high photocurrent generation with an incident-photon-to-current efficiency of up to ca. 70%.     

Competitive photoinduced electron transfer by the complex formation of porphyrin with cyclodextrin bearing viologen

Photoinduced electron transfer between a porphyrin and a new guest cyclodextrin bearing viologen occurs by a supramolecular formation with conformational change of a guest molecule.     

Diameter‐Sorted SWCNT–Porphyrin and SWCNT–Phthalocyanine Conjugates for Light‐Energy Harvesting

A non‐covalent double‐decker binding strategy is employed to construct functional supramolecular single‐wall carbon nanotubes (SWCNT)–tetrapyrrole hybrids capable of undergoing photoinduced electron transfer and performing direct conversion of light into electricity. To accomplish this, two semiconducting SWCNTs of different diameters (6,5 and 7,6) were modified via π–π stacking of pyrene functionalized with an alkyl ammonium cation (PyrNH₃⁺). Such modified nanotubes were subsequently assembled via dipole–cation binding of zinc porphyrin with one ( 1 ) or four benzo‐18‐crown‐6 cavities ( 2 ) or phthalocyanine with four benzo‐18‐crown‐6 cavities at the ring periphery ( 3 ), employed as visible‐light photosensitizers. Upon charactering the conjugates using TEM and optical techniques, electron transfer via photoexcited zinc porphyrin and phthalocyanine was investigated using time‐resolved emission and transient absorption techniques. Higher charge‐separation efficiency is established for SWCNT(7,6) with a narrow band gap than the thin SWCNT(6,5) with a wide band gap. Photoelectrochemical studies using FTO/SnO₂ electrodes modified with these donor–acceptor conjugates unanimously demonstrated the ability of these conjugates to convert light energy into electricity. The photocurrent generation followed the trend observed for charge separation, that is, incident‐photon‐to‐current efficiency (IPCE) of a maximum of 12 % is achieved for photocells with FTO/SnO₂/SWCNT(7,6)/PyrNH₃⁺: 1 .     

Recent advances in photoinduced electron transfer processes of fullerene-based molecular assemblies and nanocomposites

Photosensitized electron-transfer processes of fullerenes hybridized with electron donating or other electron accepting molecules have been surveyed in this review on the basis of the recent results reported mainly from our laboratories. Fullerenes act as photo-sensitizing electron acceptors with respect to a wide variety of electron donors; in addition, fullerenes in the ground state also act as good electron acceptors in the presence of light-absorbing electron donors such as porphyrins. With single-wall carbon nanotubes (SWCNTs), the photoexcited fullerenes act as electron acceptor. In the case of triple fullerene/porphyrin/SWCNT architectures, the photoexcited porphyrins act as electron donors toward the fullerene and SWCNT. These mechanisms are rationalized with the molecular orbital considerations performed for these huge supramolecules. For the confirmation of the electron transfer processes, transient absorption methods have been used, in addition to time-resolved fluorescence spectral measurements. The kinetic data obtained in solution are found to be quite useful to predict the efficiencies of photovoltaic cells.     

Photoinduced electron transfer in platinum(II) terpyridinyl acetylide complexes connected to a porphyrin unit

A series of six new dyads consisting of a zinc or magnesium porphyrin appended to a platinum terpyridine acetylide complex via a para-phenylene bisacetylene spacer are described. Different substituents on the 4' position of the terpyridinyl ligand were explored (OC7H15, PO3Et2, and H). The ground-state electronic properties of the dyads are studied by electronic absorption spectroscopy and electrochemistry, and they indicate some electronic interactions between the porphyrin subunit and the platinum complex. The photophysical properties of these dyads were investigated by steady-state, time-resolved, and femtosecond transient absorption spectroscopy in N,N-dimethylformamide solution. Excitation of the porphyrin unit leads to a very rapid electron transfer (2-20 ps) to the nearby platinum complex followed by an ultrafast charge recombination, thus preventing any observation of the charge separated state. The variation in the rate of the photoinduced electron transfer in the series of dyads is consistent with Marcus theory. The results underscore the potential of the para-phenylene bisacetylene bridge to mediate a rapid electron transfer over a long donor-acceptor distance.     

Control of electron transfer in a conjugated porphyrin dimer by selective excitation of planar and perpendicular conformers

A donor-acceptor system is presented in which the electron-transfer rates can be sensitively controlled by means of excitation wavelength and temperature. The electron donor is a butadiyne-linked zinc porphyrin dimer that is connected to a C(60) electron acceptor. The broad distribution of conformations allowed by the butadiyne linker makes it possible to selectively excite perpendicular or planar donor conformers and thereby prepare separate initial states with driving forces for electron transfer that differ by almost 0.2 eV. This, as well as significant differences in electronic coupling, leads to distinctly different rate constants for electron transfer, which in consequence can be controlled by changing excitation wavelength. By extending the system with a secondary donor (ferrocene), a second, long-range charge-separated state can be formed. This system has been used to test the influence of conformational heterogeneity on electron transfer mediated by the porphyrin dimer in the ground state. It was found that if the dimer is forced to a planar conformation by means of a bidentate ligand, the charge recombination rate increased by an order of magnitude relative to the unconstrained system. This illustrates how control of conformation of a molecular wire can affect its behaviour.     

A theoretical study on the third-order nonlinear optical properties of pi-conjugated linear porphyrin arrays

By using the Pariser-Parr-Pople (PPP) theory, the second hyperpolarizabilities (gamma) have been calculated for various pi-conjugated porphyrin arrays including "porphyrin tapes": the meso-beta doubly linked porphyrin array Dn and the meso-meso, beta-beta, beta-beta triply linked array Tn. The validity of the PPP theory is checked via a comparison with both the ab initio Hartree-Fock and the B3LYP theories in the case of porphyrin monomers and dimers. It is found that Dn and especially Tn exhibit much more remarkable evolution of gamma/n along with an increasing number of porphyrin units n compared with the butadiyne-bridged array, Yn. As a result, the static third-order susceptibilities chi((3)) of Dn and Tn are expected to be 1 and 3 orders of magnitude larger than that of Yn in the limit n --> infinity, and these advantages of porphyrin tapes become more prominent by taking into account geometrical relaxations of porphyrin units in the arrays. The structure-property relationship in various conjugated polymers including porphyrin arrays is interpreted on the basis of the scaling behaviors of chi((1)) and chi((3)) with the effective conjugation length (ECL) as well as the reciprocal HOMO-LUMO energy gap (1/E(g)). In particular, from the master plot of chi((3)) (and even chi((1))) versus 1/E(g), the pi-conjugation of Tn is noted to indeed be exceptional, because its large susceptibilities cannot be expected from the scaling behavior of ordinary one-dimensional conjugated systems. We also point out that the theory of scaling relationship, chi((3)) approximately 1/E(g)(x)(), is significantly improved by taking into account electron-electron interactions based on the comparison with experiments.     

Stepwise charge separation and charge recombination in ferrocene-meso,meso-linked porphyrin dimer-fullerene triad

A meso,meso-linked porphyrin dimer [(ZnP)(2)] as a light-harvesting chromophore has been incorporated into a photosynthetic multistep electron-transfer model for the first time, including ferrocene (Fc), as an electron donor and fullerene (C(60)) as an electron acceptor to construct the ferrocene-meso,meso-linked porphyrin dimer-fullerene system (Fc-(ZnP)(2)-C(60)). Photoirradiation of Fc-(ZnP)(2)-C(60) results in photoinduced electron transfer from the singlet excited state of the porphyrin dimer [(1)(ZnP)(2)] to the C(60) moiety to produce the porphyrin dimer radical cation-C(60) radical anion pair, Fc-(ZnP)(2)(*+)-C(60)(*-). In competition with the back electron transfer from C(60)(*-) to (ZnP)(2)(*+) to the ground state, an electron transfer from Fc to (ZnP)(2)(*+) occurs to give the final charge-separated (CS) state, that is, Fc(+)-(ZnP)(2)-C(60)(*-), which is detected as the transient absorption spectra by the laser flash photolysis. The quantum yield of formation of the final CS state is determined as 0.80 in benzonitrile. The final CS state decays obeying first-order kinetics with a lifetime of 19 micros in benzonitrile at 295 K. The activation energy for the charge recombination (CR) process is determined as 0.15 eV in benzonitrile, which is much larger than the value expected from the direct CR process to the ground state. This value is rather comparable to the energy difference between the initial CS state (Fc-(ZnP)(2)(*+)-C(60)(*-)) and the final CS state (Fc(+)-(ZnP)(2)-C(60)(*-)). This indicates that the back electron transfer to the ground state occurs via the reversed stepwise processes,that is, a rate-limiting electron transfer from (ZnP)(2) to Fc(+) to give the initial CS state (Fc-(ZnP)(2)(*+)-C(60)(*-)), followed by a fast electron transfer from C(60)(*-) to (ZnP)(2)(*+) to regenerate the ground state, Fc-(ZnP)(2)-C(60). This is in sharp contrast with the extremely slow direct CR process of bacteriochlorophyll dimer radical cation-quinone radical anion pair in bacterial reaction centers.     

DNA‐Mediated Copper Nanoparticle Formation on Dispersed Single‐Walled Carbon Nanotubes

A new and facile method for the preparation of single‐walled carbon nanotubes (SWCNTs) decorated with Cu nanoparticles (CuNPs) formed on a double‐stranded DNA template in aqueous solution has been developed. A specially designed synthetic DNA sequence, containing a single‐stranded domain for the dispersion of carbon nanotubes and double‐stranded domains for the selective growth of CuNPs, was utilized. The final SWCNT/CuNP hybrids were characterized using fluorescence spectroscopy and transmission electron microscopy. The analyses clearly demonstrated the selective formation of uniform CuNPs on the carbon nanotube scaffold.     

Two-dimensionally extended porphyrin tapes: synthesis and shape-dependent two-photon absorption properties

We report the synthesis and characterization of L- and T-shaped porphyrin tapes as extensible structural motifs of two-dimensionally extended porphyrin tapes. The two-photon absorption (TPA) cross-section values (sigma((2))) for L- and T-shaped porphyrin tapes as well as those for linear trimeric and tetrameric porphyrin tapes were measured by an open-aperture Z-scan method at 2300 nm, a wavelength at which the one-photon absorption contribution is either zero or almost negligible. Under these conditions, the sigma((2)) values for the linear porphyrin tape trimer and tetramer were determined to be 18 500 and 41 200 GM, respectively. The sigma((2)) value for the L-shaped trimer was determined to be 8700 GM, which is only half that of the linear trimer, whereas the sigma((2)) value for the T-shaped tetramer was measured to be 35 700 GM. These results clearly indicate the dependence of the TPA cross-section on the molecular shape, which underscores the importance of directionality in the pi-conjugation pathway for the enhancement of TPA cross- section.     

Poly(γ‐benzyl‐L‐glutamate)‐functionalized single‐walled carbon nanotubes from surface‐initiated ring‐opening polymerizations of N‐carboxylanhydride

Single‐walled carbon nanotubes (SWCNTs) have been functionalized with poly(γ‐benzyl‐L ‐glutamate) (PBLG) by ring‐opening polymerizations of γ‐benzyl‐L ‐glutamic acid‐based N‐carboxylanhydrides (NCA‐BLG) using amino‐functionalized SWCNTs (SWCNT‐NH₂) as initiators. The SWCNT functionalization has been verified by FTIR spectroscopy and transmission electron microscopy. The FTIR study reveals that surface‐attached PBLGs adopt random‐coil conformations in contrast to the physically absorbed or bulk PBLGs, which exhibit α‐helical conformations. Raman spectroscopic analysis reveals a significant alteration of the electronic structure of SWCNTs as a result of PBLG functionalization. The PBLG‐functionalized SWCNTs (SWCNT‐PBLG) exhibit enhanced solubility in DMF. Stable DMF solutions of SWCNT‐PBLG/PBLG with a maximum SWCNTs concentration of 259 mg L^?1 can be readily obtained. SWCNT‐PBLG/PBLG solid composites have been characterized by differential scanning calorimetry, thermogravimetric analysis, wide/small‐angle X‐ray scattering (W/SAXS), scanning electron microscopy, and polarized optical microscopy for their thermal or morphological properties. Microfibers containing SWCNT‐PBLG and PBLG can also be prepared via electrospinning. WAXS characterization reveals that SWCNTs are evenly distributed among PBLG rods in solution and in the solid state where PBLGs form a short‐range nematic phase interspersed with amorphous domains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2340–2350, 2010     

Zinc porphyrin sensitized redox processes in microemulsions

Photoinduced electron transfer from Zn tetraphenylporphyrin to acceptors solubilized either in the lipid interior or aqueous bulk of anionic oil-in-water microemulsions has been investigated by nanosecond laser photolysis. While intimate cosolubilization appears to decrease the efficiency of electron transfer in the former, enhanced charge separation of the redox products has been observed in the latter.     

Organized assemblies of single wall carbon nanotubes and porphyrin for photochemical solar cells: charge injection from excited porphyrin into single-walled carbon nanotubes

Photochemical solar cells have been constructed from organized assemblies of single-walled carbon nanotubes (SWCNT) and protonated porphyrin on nanostructured SnO2 electrodes. The protonated form of porphyrin (H4P2+) and SWCNT composites form 0.5-3.0 microm-sized rodlike structures and they can be assembled onto nanostructured SnO2 films [optically transparent electrode OTE/SnO2] by an electrophoretic deposition method. These organized assemblies are photoactive and absorb strongly in the entire visible region. The incident photon to photocurrent efficiency (IPCE) of OTE/SnO2/SWCNT-H4P2+ is approximately 13% at an applied potential of 0.2 V versus saturated calomel electrode. Femtosecond pump-probe spectroscopy experiments confirm the decay of the excited porphyrin in the SWCNT-H4P2+ assembly as it injects electrons into SWCNT. The dual role of SWCNT in promoting photoinduced charge separation and facilitating charge transport is presented.     

Controlled assembly of Ag nanoparticles and carbon nanotube hybrid structures for biosensing

Here we report a chemical-free, simple, and novel method in which a part from a silver-based anode is controllably used in a straightforward manner to produce silver nanoparticles (Ag NPs) in order to fabricate a controlled assembly of Ag NPs and single walled carbon nanotube (SWCNT) hybrid structures. The attachment and distribution of Ag NPs along SWCNTs have been investigated and characterized by field emission scanning electron microscopy (FESEM). We have achieved the decoration of SWCNTs with different densities of Ag NPs by changing the deposition time, the applied voltage, and the location of carbon nanotubes with respect to the anode. At low voltage, single silver nanoparticle is successfully attached at the open ends of SWCNTs whereas at high voltage, intermediate and full coverage densities of Ag NPs are observed. As voltage is further increased, fractals of Ag NPs along SWCNTs are observed. In addition, a device based on a Ag NPs-SWNT hybrid structure is used for the label-free detection of ssDNA molecules immobilized on it. We believe that the proposed method can be used to decorate and/or assemble metal nanoparticles or fractal patterns along SWCNTs with different novel metals such as gold, silver, and copper and can be exploited in various sensitive applications for fundamental research and nanotechnology.     

Naphthalenebisimides as photofunctional surfactants for SWCNTs – towards water-soluble electron donor–acceptor hybrids

A water soluble naphthalenebisimide derivative (NBI) was synthesized and probed to individualize, suspend, and stabilize single wall carbon nanotubes (SWCNTs). Besides a comprehensive photophysical and electrochemical characterization of NBI, stable suspensions of SWCNTs were realized in buffered D₂O. Overall, the dispersion efficiency of the NBI surfactant was determined by comparison with naphthalene based references. Successful individualization of SWCNTs was corroborated in several microscopic assays. In addition, emission spectroscopy points to the strong quenching of SWCNT centered band gap emission, when NBIs are immobilized onto SWCNTs. The origin of the quenching was found to be strong electronic communication, which leads to charge separation between NBIs and photoexcited SWCNTs, and, which yields reduced NBIs as well oxidized SWCNTs. Notably, electrochemical considerations revealed that the energy content of these charge separated states is one of the highest reported for SWCNT based electron donor–acceptor hybrids so far.     

Enhanced electron transfer by dendritic architecture: energy transfer and electron transfer in snowflake-shaped Zn porphyrin dendrimers

[structure: see text] Photoinduced electron transfer was observed for the snowflake-shaped dendrimer with the Zn porphyrin core and anthraquinonyl terminals. Comparison of the electron-transfer efficiency of the dendrimer with the linear analogues indicates the advantage of the dendritic structure for the electron-transfer process.