Concentration of electroelastic fields in a composite piezoceramic plate with a hole intersecting the interface of materials

A plane problem of electroelasticity is considered for an infinite compound plate with a hole located in both constituents of the plate. The corresponding boundary value problems is reduced to a system of singular integral equations of second kind, which is solved in numerical quadratures. Calculation results are presented that describe the concentration of electroelastic fields near the hole upon action at infinity of the vectors of mechanical stresses and electric field strength.Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 3, pp. 359–366, May–June, 1999.     

圆柱壳中圆盘状晶体压力传感器的厚度剪切振动

以电弹性体中叠加于偏场之上的小增量场理论为基础,研究了固定在圆柱壳中的圆盘状晶体谐振器的厚度剪切振动问题,得到了环境压力所诱导的谐振器频率漂移的表达式,该表达式可用于指导压力传感器的优化设计．数值结果表明:频率漂移与环境压力成正比,并且外壳的刚度越小或者压电晶片与外壳厚度之比越小,则压力传感器的灵敏度越高．     

Numerical analysis of the dispersion of electroelastic waves in a cylinder

The wave problem of electroelastic waves in a cylinder is reduced to a spectral problem for a system of eight ordinary differential equations. We give an algorithm for numerical solution based on reducing the original boundary-value problem to four Cauchy problems and determining the roots of the dispersion equation by the method of bisection. One figure. Bibliogrpahy: 4 titles. Translated fromTeoreticheskaya i Prikladnaya Mekhanika, No. 27, 1997, pp. 149–153.     

Solution of boundary-value problems of plates by the Vekua method for approximations <Emphasis Type="Italic">N</Emphasis> = 1 and <Emphasis Type="Italic">N</Emphasis> = 2

In this paper, the problem of bending for an isotropic plate with constant thickness 2h is considered. Problems of bending for infinite plates with a circular hole in which a rigid body is placed in the cases of approximations N = 1 and N = 2 of the Vekua theory are solved. We consider the case where the body is soldered. Problems of bending of circular rings are also solved. The results obtained are compared to the corresponding results obtained by plane classical bending theory. Translated from Sovremennaya Matematika i Ee Prilozheniya (Contemporary Mathematics and Its Applications), Vol. 51, Differential Equations and Their Applications, 2008.     

Numerical analysis of the dispersion of electroelastic waves in a cylinder whose physical properties have a longitudinal axis of symmetry

We develop a numerical method of analyzing the dispersion of electroelastic waves in a hollow circular cylinder. The method is based on the reduction of the wave problem to a spectral problem for a system of ordinary differential equations. This system is solved numerically. The roots of the dispersion equation are determined by the method of bisection. The practical convergence of the algorithm is shown using a specific example. One figure. Bibliography: 3 titles. Translated fromTeoreticheskaya i Prikladnaya Mekhanika, No. 28, 1998, pp. 151–156.     

Investigation of coupled physical fields in a compound piezoceramic wedge

A composition consisting of two infinite wedges fastened together along their common side is considered. The outer surfaces of the wedges are fixed and coated with grounded electrodes, and an ideal mechanical and electrical contact is assumed along the interface of both wedges. At certain relations of the geometric and stiffness parameters of the wedge components, the coupled electroelastic fields have a power-type singularity (intensified by oscillations) at the wedge vertex as a result of action of mechanical or electrical loads on the compound wedge. Such an effect is not observed in the case of piezopassive compound wedges (under antiplane strain conditions). The present study is dedicated to the investigation of this phenomenon. Closed-form solutions of some electroelastic boundary-value problems are constructed for the case of action of point shearing forces or electric charges.Sumskii State University, Ukraine. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 6, pp. 777–784, November–December, 1999.     

Computation of anisotropic plates with curvilinear holes reinforced by prestressed rods

We consider the stressed state of an anisotropic plate with an elliptic hole whose boundary is reinforced by a prestressed curvilinear rod of arbitrary cross section symmetric with respect to the middle plane of the plate. The elastic equilibrium of the rod is described by the equations of the theory of curvilinear rods. The solution of the problem is reduced to a system of linear algebraic equations. We show the influence of prestressing on the stressed states of the bodies.Translated fromMatematicheskie Metody i Fiziko-Mekhanicheskie Polya, Issue 36, 1992, pp. 76–80.     

The stressed state in a rigid body caused by Laplacian loads in a negative crystal

We study the problem of finding the stresses in a plate with a hole in the shape of a rectangular polygon with rounded corners under the action of a Laplacian load. We obtain expressions for the force acting on a point defect located near a vertex of a square hole.Translated fromMatematicheskie Metody i Fiziko-Mekhanicheskie Polya, Issue 34, 1991, pp. 69–73.     

Surface waves in electrostrictive materials under biasing fields

The theory of small incremental fields superposed on finite biasing fields in an electroelastic body is summarized first in this paper. The Stroh formalism for two-dimensional anisotropic elasticity and piezoelectricity is generalized to two-dimensional problems of an electroelastic body under biasing mechanical and electric fields. Application of this generalized Stroh formalism to study surface waves propagating in an electroelastic half-space under uniform initial fields indicates that there exist at most two surface waves even in the presence of biasing fields and these two surface waves correspond to the well-known Rayleigh and Bleustein waves in the mechanical nature. A simple procedure is established to distinguish these two types of waves. Application of the results to a model electrostrictive material is included for illustration. It is found that initial biasing fields can greatly influence propagation feature of surface waves.     

Mixed Antiplane Problem of Electroelasticity for a Piezoceramic Half-Space with a Tunnel Hole

Harmonic vibrations of a piezoceramic half-space weakened by a tunnel hole with a system of active surface electrodes are investigated. Based on integral representations for solutions to two types of conditions on the boundary of the half-space, the boundary-value problem of electroelasticity is reduced to a system of singular integrodifferential equations of the second kind. The results of parametric investigations characterizing the behavior of the electroelastic field components on the boundary and in the region of a piecewise-homogeneous half-space are presented.     

An inverse electromagnetic scattering problem for a bi-periodic inhomogeneous layer on a perfectly conducting plate

This article is concerned with uniqueness for reconstructing a periodic inhomogeneous medium sitting on a perfectly conducting plate. We deal with the problem in the framework of time-harmonic Maxwell systems without TE or TM polarization. An orthogonal relation is obtained for two refractive indices and then used to prove that the refractive index can be uniquely identified from a knowledge of the incident fields and the total tangential electric field on a plane above the inhomogeneous medium, utilizing the eigenvalues and eigenfunctions of a quasi-periodic Sturm–Liouville eigenvalue problem.     

The Cauchy problem for a degenerate equation of plate vibration type

We study the Cauchy problem with zero initial conditions for an equation of plate vibration type that is degenerate on the plane of the given initial data. We obtain conditions for the existence and uniqueness of a generalized solution in the case when the rate of degeneration is at least linear.Translated fromMatematicheskie Metody i Fiziko-Mekhanicheskie Polya, Issue 32, 1990, pp. 79–81.     

On a method of studying the stress state of orthotropic shells and plates weakened by a hole with cracks extending to its edge

On the basis of the Timoshenko kinematic hypothesis for shells we give a formulation of the problem of studying the stress-strain state of orthotropic plates and shells weakened by a combined stress concentrator (a hole with two symmetric cracks extending to its edge). We propose a method of solving such problems on the basis of the finite-element method. To simulate the singularity of the stresses and displacements in a neighborhood of the tip of a crack we apply special finite elements with degenerate faces and nodes displaced by 1/4 the length of an edge. The stress intensity factors are found in terms of the displacements of the nodes of such elements. We give the results of computation of the concentration coefficients and the stress intensity factors for spherical and cylindrical shells loaded by internal pressure and for a cylindrical shell and a plate under the action of a distending load with various concentrators: a circular hole, an isolated crack, and a combined concentrator. Translated fromTeoreticheskaya i Prikladnaya Mekhanika, No. 23, 1992, pp. 48–54.     

Minimal Lipschitz Extensions to Differentiable Functions Defined on a Hilbert Space

We generalize the Lipschitz constant to fields of affine jets and prove that such a field extends to a field of total domain \mathbbRⁿ{\mathbb{R}^n} with the same constant. This result may be seen as the analog for fields of the minimal Kirszbraun’s extension theorem for Lipschitz functions and, therefore, establishes a link between Kirszbraun’s theorem and Whitney’s theorem. In fact this result holds not only in Euclidean \mathbbRⁿ{\mathbb{R}^n} but also in general (separable or not) Hilbert space. We apply the result to the functional minimal Lipschitz differentiable extension problem in Euclidean spaces and we show that no Brudnyi–Shvartsman-type theorem holds for this last problem. We conclude with a first approach of the absolutely minimal Lipschitz extension problem in the differentiable case which was originally studied by Aronsson in the continuous case.     

Uniform Estimates of Remainders in Asymptotic Expansions of Solutions to the Problem on Eigenoscillations of a Piezoelectric Plate

A method for obtaining estimates of asymptotic remainders is presented. The constants in estimates are independent of the number of the eigenvalue, as well as of the small parameter h, the thickness of the plate. Owing to an information about connections between frequencies of eigenoscillations of the three-dimensional plates and its two-dimensional model obtained under various restrictions to h, it is possible to divide the asymptotics in collective and individual ones. Only in the case of the individual asymptotics, i.e., under rigid restrictions on h, it is possible to construct asymptotic expansions for the corresponding eigenvectors. We consider arbitrarily anizotropic composed cylindrical plates in whcih piezoeffects can dominate along longitudinal directions, as well as along transverse directions. The connectedness of elastic and electric fields Implies the appearance of a nontrivial dissipative components of the operator of the problem under consideration, but its spectrum remains real and positive. Bibliography: 43 titles.     

State of stress of an anisotropic plate with a closed rod pressed into a curvilinear hole in it

A method is proposed for solving the problem of elastic equilibrium in the case of an anisotropic plate with a closed rod pressed into a curvilinear hole in it (or stretched over an anisotropic disk). This method is based on representing the boundary conditions in the form of contour integrals of an arbitrary function holomorphic within the region of that plate. The normal magnitude of the jump of the displacement vector at the contact line is given as the function of the arc. Friction at the contact line is assumed negligible. The stress-strain state of the rod (ring) is described by the equations in the theory of thin curvilinear beams.I. V. Franko L'vov State University. Translated from Mekhanika Polimerov, No. 2, pp. 304–309, March–April, 1976.     

Action of a concentrated load on an elastic ring pressed into a circular hole in an anisotropic plate

A solution is obtained for the elastic equilibrium problem for an anisotropic plate with a circular hole into which is pressed a ring of arbitrary cross section symmetrical about the middle surface of the plate. Before deformation the outside radius of the ring differs from the radius of the hole in the plate by the amount of the permissible elastic displacements. A normal concentrated load is applied to the ring. The ring is analyzed in accordance with the theory of thin curved bars. A numerical example is given.I. Franko L'vov State University. Translated from Mekhanika Polimerov, No. 6, pp. 1054–1059, November–December, 1973.     

An axially symmetric contact problem for a half-space with an elastically reinforced cylindrical cavity

We consider the pressure of a plate on a half-space with a round cylindrical cavity. The surface of the cavity is reinforced by elastic elements that are modeled by very general operators. The problem is reduced to a Fredholm integral equation of second kind. A detailed study is made of the case of reinforcement described by the Winkler law. An approximate solution is obtained in the form of the asymptotics with respect to the radii of the plate and the cavity.Translated fromDinamicheskie Sistemy, No. 6, 1987, pp. 80–85.     

Relative stiffness of irregularly perforated plates

Approximation of the average field is used in order to calculate the relative elastic properties of plates irregularly perforated with a large number of different hole. Relative properties are calculated for a plate perforated with a different kind of elliptical hole. It is shown that the Young's modulus and shear modulus of a plate perforated with identical round holes calculated in this approximation have values similar to those calculated accurately for the case of a regularly perforated plate.Translated from Dinamicheskie Sistemy, No. 5, pp. 3–11, 1986.     

On the vibrations of a plate with a concentrated mass and very small thickness

We consider the vibrations of an elastic plate that contains a small region whose size depends on a small parameter ε. The density is of order O(ε^–m) in the small region, the concentrated mass, and it is of order O(1) outside; m is a positive parameter. The thickness plate h being fixed, we describe the asymptotic behaviour, as ε→O, of the eigenvalues and eigenfunctions of the corresponding spectral problem, depending on the value of m: Low‐ and high‐frequency vibrations are studied for m>2. We also consider the case where the thickness plate h depends on ε; then, different values of m are singled out. Copyright © 2003 John Wiley & Sons, Ltd.