Ammonolysis of mono(pentamethylcyclopentadienyl) titanium(IV) derivatives

Ammonolyses of mono(pentamethylcyclopentadienyl) titanium(IV) derivatives [Ti(eta5-C5Me5)X3] (X = NMe2, Me, Cl) have been carried out in solution to give polynuclear nitrido complexes. Reaction of the tris(dimethylamido) derivative [Ti(eta5-C5Me5)(NMe2)3] with excess of ammonia at 80-100 degrees C gives the cubane complex [[Ti(eta5-C5Me5)]4(mu3-N)4] (1). Treatment of the trimethyl derivative [Ti(eta5-C5Me5)Me3] with NH3 at room temperature leads to the trinuclear imido-nitrido complex [[Ti(eta/5-CsMes)(mu-NH)]3(mu3-N)] (2) via the intermediate [[Ti(eta5-C5Me5)Me]2(mu-NH)2] (3). The analogous reaction of [Ti(eta5-C5Me5)Me3] with 2,4,6-trimethylaniline (ArNH2) gives the dinuclear imido complex [[Ti(eta5-C5Me5)Me])2(mu-NAr)2] (4) which reacts with ammonia to afford [[Ti(eta5-C5Me5)(NH2)]2(mu-NAr)2] (5). Complex 2 has been used, by treatments with the tris(dimethylamido) derivatives [Ti(eta5-C5H5-nRn)(NMe2)3], as precursor of the cubane nitrido systems [[Ti4(eta5-C5Me5)3(eta5-C5H5-nRn)](mu3-N)4] [R = Me n = 5 (1), R = H n = 0 (6), R = SiMe3 n = 1 (7), R = Me n = 1 (8)] via dimethylamine elimination. Reaction of [Ti(eta5-C5Me5)Cl3] or [Ti(eta5-C5Me5)(NMe2)Cl2] with excess of ammonia at room temperature gives the dinuclear complex [[Ti2(eta5-C5Me5)2Cl3(NH3)](mu-N)] (9) where an intramolecular hydrogen bonding and a nonlineal nitrido ligand bridge the "Ti(eta5-C5Me5)Cl(NH3)" and "Ti(eta5-C5Me5)Cl2" moieties. The molecular structures of [[Ti(eta5-C5Me5)Me]2 (mu-NAr)2] (4) and [[Ti2(eta5-C5Me5)2Cl3(NH3)](mu-N)] (9) have been determined by X-ray crystallographic studies. Density functional theory calculations also have been conducted on complex 9 to confirm the existence of an intramolecular N-H...Cl hydrogen bond and to evaluate different aspects of its molecular disposition.     

Alkylimido osmium(VI) and ruthenium(VI) porphyrins. Crystal and molecular structures of Os(TTP)(O)(NBu~t)·EtOH and Os(4-Cl-TPP)(NBu~t)_2

Oxo(tert-butylimido) or bis(tert-butylimido)osmium(VI) porphyrins Os(Por)(O)(NBut) and Os(Por)(NBut)2, [Por=meso-tetrakis(p-tolyl)porphyrinato (TTP) and meso-tetrakis(4-chlorophe-nyl)porphyrinato (4-Cl-TPP)] were synthesized by air oxidation of bis(tert-butylamme)osmium(II) porphyrins [Os(Por)(H2NBut)2 (Por=TPP, 4-Cl-TPP], depending on whether tert-butylamine is present. The bis(tert-butylamine)ruthenium(II) porphyrins [Ru(Por)(H2NBut)2, Por=TTP, 4-Cl-TPP] can undergo bromine oxidation to give oxo(tert-butylimido)ruthenium(VI) complexes in quantitative yields. All these new complexes were characterized by 1H NMR, UV-Visible and IR spectroscopy. The X-ray crystal structures of Os(TTP)(O)(NBut).EtOH and Os(4-Cl-TPP)(NBut)2 have been determined. Crystal data: for Os(TTP)(O)(NBut).EtOH: monoclinic, space group P21/c, a=1.3546(6) nm, b=2.3180(3) nm, c=1.6817(3) nm, B=90.84(2), V=527.97(1) nm3, Z=4. The Os=O and Os=NBut distances in Os(TTP)(O)(NBut).EtOH are 0.1772(7) nm and 0.1759(9) nm, respectively. The av     

Phosphodiester cleavage properties of copper(II) complexes of 1,4,7-triazacyclononane ligands bearing single alkyl guanidine pendants

Three new metal-coordinating ligands, L(1)·4HCl [1-(2-guanidinoethyl)-1,4,7-triazacyclononane tetrahydrochloride], L(2)·4HCl [1-(3-guanidinopropyl)-1,4,7-triazacyclononane tetrahydrochloride], and L(3)·4HCl [1-(4-guanidinobutyl)-1,4,7-triazacyclononane tetrahydrochloride], have been prepared via the selective N-functionalization of 1,4,7-triazacyclononane (tacn) with ethylguanidine, propylguanidine, and butylguanidine pendants, respectively. Reaction of L(1)·4HCl with Cu(ClO(4))(2)·6H(2)O in basic aqueous solution led to the crystallization of a monohydroxo-bridged binuclear copper(II) complex, [Cu(2)L(1)(2)(μ-OH)](ClO(4))(3)·H(2)O (C1), while for L(2) and L(3), mononuclear complexes of composition [Cu(L(2)H)Cl(2)]Cl·(MeOH)(0.5)·(H(2)O)(0.5) (C2) and [Cu(L(3)H)Cl(2)]Cl·(DMF)(0.5)·(H(2)O)(0.5) (C3) were crystallized from methanol and DMF solutions, respectively. X-ray crystallography revealed that in addition to a tacn ring from L(1) ligand, each copper(II) center in C1 is coordinated to a neutral guanidine pendant. In contrast, the guanidinium pendants in C2 and C3 are protonated and extend away from the Cu(II)-tacn units. Complex C1 features a single μ-hydroxo bridge between the two copper(II) centers, which mediates strong antiferromagnetic coupling between the metal centers. Complexes C2 and C3 cleave two model phosphodiesters, bis(p-nitrophenyl)phosphate (BNPP) and 2-hydroxypropyl-p-nitrophenylphosphate (HPNPP), more rapidly than C1, which displays similar reactivity to [Cu(tacn)(OH(2))(2)](2+). All three complexes cleave supercoiled plasmid DNA (pBR 322) at significantly faster rates than the corresponding bis(alkylguanidine) complexes and [Cu(tacn)(OH(2))(2)](2+). The high DNA cleavage rate for C1 {k(obs) = 1.30 (±0.01) × 10(-4) s(-1) vs 1.23 (±0.37) × 10(-5) s(-1) for [Cu(tacn)(OH(2))(2)](2+) and 1.58 (±0.05) × 10(-5) s(-1) for the corresponding bis(ethylguanidine) analogue} indicates that the coordinated guanidine group in C1 may be displaced to allow for substrate binding/activation. Comparison of the phosphate ester cleavage properties of complexes C1-C3 with those of related complexes suggests some degree of cooperativity between the Cu(II) centers and the guanidinium groups.     

Osmium Complexes of 1,4,7-Triazacyclononane (tacn) and 1,4,7-Trimethyl-1,4,7-triazacyclononane (Me(3)tacn) and the X-ray Crystal Structure of [(Me(3)tacn)Os(eta(6)-C(6)H(5)BPh(3))]BPh(4).CH(3)CN

The complexes of osmium with tacn (1,4,7-triazacyclononane) and Me(3)tacn (1,4,7-trimethyl-1,4,7-triazacyclononane), [LOs (eta(6)-C(6)H(6))](PF(6))(2) (L = tacn) and LOsCl(3) (L = tacn, Me(3)tacn), have been prepared by substitution of L on [Os(eta(6)-C(6)H(6))Cl(2)](2) or [Os(2)Cl(8)](2)(-), respectively. Reaction of LOsCl(3) with neat triflic acid leads to partial replacement of chloride and formation of the binuclear Os(III)-Os(III) complexes [LOs(&mgr;-Cl(3))OsL](PF(6))(3) (L = tacn, Me(3)tacn). The binuclear nature was established by NMR spectroscopy and elemental analysis and, for L = tacn, a partially refined X-ray crystal structure which shows the Os-Os separation to be 2.667 ?, indicative of significant metal-metal bonding. Reduction of [LOs(&mgr;-Cl(3))OsL](3+) over zinc amalgam in either aqueous or non-aqueous solution yields the intensely colored Os(II)-Os(III) mixed-valence ions [LOs(&mgr;-Cl(3))OsL](2+). Electrochemical measurements on [LOs(&mgr;-Cl(3))OsL](3+) in CH(3)CN reveal the reversible formation of the mixed valence ions. These are further reduced at lower potential to the Os(II)-Os(II) binuclear species, reversibly for L = Me(3)tacn. (Me(3)tacn)OsCl(3) is oxidized by persulfate ion to give [(Me(3)tacn)OsCl(3)](+); zinc amalgam reduction in an aqueous solution at high concentration produces the binuclear complex [(Me(3)tacn)Os(&mgr;-Cl(3))Os(Me(3)tacn)](3+) or, at low concentration, a solution containing an air sensitive osmium(II) species. Addition of BPh(4)(-) results in the eta(6)-arene zwitterion [(Me(3)tacn)Os(eta(6)-C(6)H(5)BPh(3))](+), which was characterized by X-ray diffraction on the BPh(4)(-) salt. The compound crystallizes in the triclinic space group P1 with a = 11.829(2) ?, b = 12.480(3) ?, c = 17.155(4) ?, alpha = 84.42(2) degrees, beta = 83.52(2) degrees, gamma = 71.45(2) degrees, V = 2380(2) ?(3), Z = 2, and R = 7.62%, and R(w) = 7.39%.     

Preparation and properties of cyclopentadienyl- and pentamethylcyclopentadienyl-titanium(IV) complexes with the C8H4S8 ligand, electrical conductivities of their oxidized species, and X-ray crystal structure of Ti(C5Me5)2(C8H4S8)

Ti(C5H5)2(C8H4S8) (1), Ti(C5Me5)2(C8H4S8) (2), [NMe4][Ti(C5H5)(C8H4S8)2] (3), and [NMe4][Ti(C5Me5)(C8H4S8)2] (4) [C8H4S8(2-) = 2-(4,5-ethylenedithio)-1,3-dithiole-2-ylidene)-1,3-dithiole-4,5- dithiolate(2-)] were prepared by reaction of Ti(C5H5)2Cl2, Ti(C5Me5)2Cl2, Ti(C5H5)Cl3, or Ti(C5Me5)Cl3 with Li2C8H4S8 or [NMe4]2[C8H4S8] in THF. They were oxidized by iodine, the ferrocenium cation, or TCNQ (7,7,8,8-tetracyano-p-quinodimethane) in CH2Cl2 or in acetone to afford one-electron-oxidized and over-one-electron-oxidized species, [Ti(C5H5)2(C8H4S8)].I3, [Ti(C5H5)2(C8H4S8)][PF6], [Ti(C5Me5)2(C8H4S8)].I3, [Ti(C5Me5)2(C8H4S8)][PF6], [Ti(C5H5)(C8H4S8)2].I0.9, [Ti(C5H5)(C8H4S8)2][TCNQ]0.3, [Ti(C5Me5)(C8H4S8)2].I2.4, and [Ti(C5Me5)(C8H4S8)2][TCNQ]0.3, with the C8H4S8 ligand-centered oxidation. They exhibited electrical conductivities of 1.6 x 10(-1) to 7.6 x 10(-4) S cm-1 measured for compacted pellets at room temperature. The crystal structure of 2 was clarified to consist of isolated dimerized units of the molecules through some sulfur-sulfur nonbonded contacts: monoclinic, P2(1)/c, a = 9.534(2) A, b = 18.227(2) A, c = 17.775(2) A, beta = 94.39(1) degrees, Z = 4.     

Rhodium/iridium-titanium azaheterometallocubanes

Treatment of [[Ti(eta5-C5Me5)(mu-NH)]3(mu3-N)] (1) with the diolefin complexes [[MCl(cod)]2] (M = Rh, Ir; cod = 1,5-cyclooctadiene) in toluene afforded the ionic complexes [M-(cod)(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)]Cl [M = Rh (2), Ir (3)]. Reaction of complexes 2 and 3 with [Ag(BPh4)] in dichloromethane leads to anion metathesis and formation of the analogous ionic derivatives [M(cod)(mu3-NH)3Ti3-(eta5-C5Me5)3(mu3-N)][BPh4] [M = Rh (4), Ir (5)]. An X-ray crystal structure determination for 5 reveals a cube-type core [IrTi3N4] for the cationic fragment, in which 1 coordinates in a tripodal fashion to the iridium atom. Reaction of the diolefin complexes [[MCl(cod))2] (M = Rh, Ir) and [[RhCl(C2H4)2]2] with the lithium derivative [[Li(mu3-NH)2(mu3-N)-Ti3(eta5-C5Me5)3(mu3-N)]2] x C7H8 (6 C7H8) in toluene gave the neutral cube-type complexes [M(cod)(mu-NH)2(mu3-N)Ti3-(eta5-C5Me5)3(mu3-N)] [M = Rh (7), Ir (8)] and [Rh(C2H4)2(mu3-NH)2(mu3-N)Ti3(eta5-C5Me5)3(mu3-N)] (9), respectively. Density functional theory calculations have been carried out on the ionic and neutral azaheterometallocubane complexes to understand their electronic structures.     

Vanadium complexes of the N(CH2CH2S)3(3-) and O(CH2CH2S)2(2-) ligands with coligands relevant to nitrogen fixation processes

Vanadium(III) and vanadium(V) complexes derived from the tris(2-thiolatoethyl)amine ligand [(NS3)3-] and the bis(2-thiolatoethyl)ether ligand [(OS2)2-] have been synthesized with the aim of investigating the potential of these vanadium sites to bind dinitrogen and activate its reduction. Evidence is presented for the transient existence of (V(NS3)(N2)V(NS3), and a series of mononuclear complexes containing hydrazine, hydrazide, imide, ammine, organic cyanide, and isocyanide ligands has been prepared and the chemistry of these complexes investigated. [V(NS3)O] (1) reacts with an excess of N2H4 to give, probably via the intermediates (V(NS3)(NNH2) (2a) and (V(NS3)(N2)V(NS3) (3), the V(III) adduct [V(NS3)(N2H4)] (4). If 1 is treated with 0.5 mol of N2H4, 0.5 mol of N2 is evolved and green, insoluble [(V(NS3))n] (5) results. Compound 4 is converted by disproportionation to [V(NS3)(NH3)] (6), but 4 does not act as a catalyst for disproportionation of N2H4 nor does it act as a catalyst for its reduction by Zn/HOC6H3Pri2-2,6. Compound 1 reacts with NR1(2)NR2(2) (R1 = H or SiMe3; R2(2) = Me2, MePh, or HPh) to give the hydrazide complexes [V(NS3)(NNR2(2)] (R2(2) = Me2, 2b; R2(2) = MePh, 2c; R2(2) = HPh, 2d), which are not protonated by anhydrous HBr nor are they reduced by Zn/HOC6H3Pri2-2,6. Compound 2b can also be prepared by reaction of [V(NNMe2)(dipp)3] (dipp = OC6H3Pri2-2,6) with NS3H3. N2H4 is displaced quantitatively from 4 by anions to give the salts [NR3(4)][V(NS3)X] (X = Cl, R3 = Et, 7a; X = Cl, R3 = Ph, 7b; X = Br, R3 = Et, 7c; X = N3, R3 = Bu(n), 7d; X = N3, R3 = Et, 7e; X = CN, R3 = Et, 7f). Compound 6 loses NH3 thermally to give 5, which can also be prepared from [VCl3(THF)3] and NS3H3/LiBun. Displacement of NH3 from 6 by ligands L gives the adducts [V(NS3)(L)] (L = MeCN, nu CN 2264 cm-1, 8a; L = ButNC, nu NC 2173 cm-1, 8b; L = C6H11NC, nu NC 2173 cm-1, 8c). Reaction of 4 with N3SiMe3 gives [V(NS3)(NSiMe3)] (9), which is converted to [V(NS3)(NH)] (10) by hydrolysis and to [V(NS3)(NCPh3)] (11) by reaction with ClCPh3. Compound 10 is converted into 1 by [NMe4]OH and to [V(NS3)NLi(THF)2] (12) by LiNPri in THF. A further range of imido complexes [V(NS3)(NR4)] (R4 = C6H4Y-4 where Y = H (13a), OMe (13b), Me (13c), Cl (13d), Br (13e), NO2 (13f); R4 = C6H4Y-3, where Y = OMe (13g); Cl (13h); R4 = C6H3Y2-3,4, where Y = Me (13i); Cl (13j); R4 = C6H11 (13k)) has been prepared by reaction of 1 with R4NCO. The precursor complex [V(OS2)O(dipp)] (14) [OS2(2-) = O(CH2CH2S)2(2-)] has been prepared from [VO(OPri)3], Hdipp, and OS2H2. It reacts with NH2NMe2 to give [V(OS2)(NNMe2)(dipp)] (15) and with N3SiMe3 to give [V(OS2)(NSiMe3)(dipp)] (16). A second oxide precursor, formulated as [V(OS2)1.5O] (17), has also been obtained, and it reacts with SiMe3NHNMe2 to give [V(OS2)(NNMe2)(OSiMe3)] (18). The X-ray crystal structures of the complexes 2b, 2c, 4, 6, 7a, 8a, 9, 10, 13d, 14, 15, 16, and 18 have been determined, and the 51V NMR and other spectroscopic parameters of the complexes are discussed in terms of electronic effects.     

Preparation and characterization of diarylphosphazene and diarylphosphinohydrazide complexes of titanium, tungsten and ruthenium and phosphorylketimido complexes of rhenium

Reaction of the proligand Ph2PN(SiMe3)2 (L1) with WCl6 gives the oligomeric phosphazene complex [WCl4(NPPh2)]n, 1 and subsequent reaction with PMe2Ph or NBu4Cl gives [WCl4(NPPh2)(PMe2Ph)] (2) or [WCl5(NPPh2)][NBu4] (3), respectively. DF calculations on [WCl5(NPPh2)][NBu4] show a W=N double bond (1.756 A) and a P-N bond distance of 1.701 A, which combined with the geometry about the P atom suggests, there is no P-N multiple bonding. Reaction of L1 with [ReOX3(PPh3)2] in MeCN (X = Cl or Br) gives [ReX2(NC(CH3)P(O)Ph2)(MeCN)(PPh3)](X = Cl, 4, X = Br, 5) which contains the new phosphorylketimido ligand. It is bound to the rhenium centre with a virtually linear Re-N-C arrangement (Re-N-C angle = 176.6 degrees, when X = Cl) and there is multiple bonding between Re and N (Re-N = 1.809(7) A when X = Cl). The proligand Ph2PNHNMe2(L2H) reacts with [(C5H5)TiCl3] to give [(C5H5)TiCl2(Me2NNPPh2)] (6). An X-ray crystal structure of the complex shows the ligand (L2) is bound by both nitrogen atoms. Reaction of the proligands Ph2PNHNR2[R2 = Me2 (L2H), -(CH2CH2)2NCH3 (L3H), (CH2CH2)2CH2 (L4H)] with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave [RuCl2(eta6-p-MeC6H4iPr)L] {L = L2H (7), L3H (8), L4H (9)}. The X-ray crystal structures of 7-9 confirmed that the phosphinohydrazine ligand is neutral and bound via the phosphorus only. Reaction of complexes 7-9 with AgBF4 resulted in chloride ion abstraction and the formation of the cationic species [RuCl(6-p-MeC6H4iPr)(L)]+ BF4- {(L = L2H (10), L3H (11), L4H (12)}. Finally, reaction of complex 6 with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave the binuclear species [(eta6-p-MeC6H4iPr)Cl2Ru(mu2,eta3-Ph2PNNMe2)TiCl2(C5H5)], 13.     

Half-sandwich titanium(IV) complexes with Kläui's tripod ligand

Treatment of [Ti(O-i-Pr)(2)Cl(2)] with NaL(OEt) (L(OEt)(-) = [CpCo[P(O)(OEt)(2)](3)](-), Cp = eta(5)-C(5)H(5)) afforded [L(OEt)Ti(O-i-Pr)(2)Cl] that reacted with HCl in ether to give [L(OEt)TiCl(3)] (1). The average Ti-O and Ti-Cl distances in 1 are 1.975 and 2.293 A, respectively. Reaction of titanyl sulfate with NaL(OEt) in water followed by addition of HBF(4) afforded [L(OEt)TiF(3)] (2), the Ti-O and Ti-F distances of which are 2.020(2) and 1.792(2) A, respectively. The Zr(IV) analogue [L(OEt)ZrF(3)] (3) was prepared similarly from zirconyl nitrate, NaL(Oet), and HBF(4) in water. The Zr-O and average Zr-F distances in 3 are 2.139(2) and 1.938(2) A, respectively. Treatment of 1 with tetrachlorocatechol (H(2)Cl(4)cat) afforded [L(OEt)Ti(Cl(4)cat)Cl] (4). The average Ti-O(P), Ti-O(C), and Ti-Cl distances in 4 are 1.972, 1.926, and 2.334 A, respectively. Hydrolysis of 4 in the presence of Et(3)N yielded the mu-oxo dimer [(L(OEt))(2)Ti(2)(Cl(4)cat)(2)(mu-O)] (5). The average Ti-O(P), Ti-O(C), and Ti-O(Ti) distances in 5 are 2.027, 1.926, and 1.7977(9) A. Treatment of 1 with 1,1'-binaphthol (BINOLH(2)) in the presence of Et(3)N afforded [(L(OEt))(2)Ti(2)(mu-O)(2)(mu-BINOL)] x 2BINOLH(2) (6.2BINOLH(2)). Complex 1 is capable of catalyzing ring opening of epoxides with Me(3)SiN(3) under solvent-free conditions presumably via a Ti-azide intermediate.     

The synthesis, structure and properties of copper(II) complexes of asymmetrically functionalized derivatives of 1,4,7-triazacyclononane

Reaction of 1-propylamino-4-acetato-1,4,7-triazacyclononane (L1), 1-benzyl-4-acetato-1,4,7-triazacyclononane (L2) and 1-benzyl-4-propylamino-1,4,7-triazacyclononane (L3) with a copper(II) salt gave Na2[CuL1](ClO4)3(1a), [CuL2]Cl (2) and [Cu2L32](ClO4)4.5H2O (3), respectively. [CuL4]ClO4 (4) was formed by reacting 1-formyl-4-ethylacetato-1,4,7-triazacyclononane with cupric chloride in aqueous solution. The X-ray crystal structures of the complexes reveal that the ligands generate distorted square pyramidal or square planar coordination environments about the Cu(II) centre, but in three complexes (1b, 3 and 4) weak interactions to an oxygen atom from a perchlorate anion and, in the case of 4, also to an amide nitrogen leading to tetragonally elongated octahedral Cu(II) geometries. In 4, the formyl group is found to reduce the coordinating ability of the macrocyclic nitrogen to which it is attached, as evidenced by the weak CuN interaction. The formation of five-membered chelate rings on coordination of the ligands further contributes to the distortion from the ideal geometries. The crystal lattices contain a number of novel supramolecular features. 1a contains a negatively charged sodium perchlorate chain of composition [Na2(ClO4)3]x(x-), with a complex series of Na-O-Na bridges flanked by [CuL1]+ units, while 3 contains highly complex hydrogen bonded sheets approximately 20 A thick that stack through van der Waals interactions. One-dimensional chains comprised of copper complexes are found in 2 and 4, and are held together by hydrogen bonds in 2 and acetate bridges between the copper cations in 4. The solution EPR spectra indicate that the copper(II) centres exist in isolated distorted square pyramidal (possibly square planar for 4) environments, while in the solid state there is evidence for the existence of weak exchange and dipole-dipole coupling for some complexes.     

Probing the effects of ligand structure on activity and selectivity of Cr(III) complexes for ethylene oligomerisation and polymerisation

A series of distorted octahedral Cr(III) complexes containing tridentate S-, S/O- or N-donor ligands comprised of three distinct architectures: facultative {S(CH(2)CH(2)SC(10)H(21))(2) (L(1)) and O(CH(2)CH(2)SC(10)H(21))(2) (L(2))}, tripodal {MeC(CH(2)S(n)C(4)H(9))(3) (L(3)), MeC(CH(2)SC(10)H(21))(3) (L(4))} and macrocyclic {(C(10)H(21))[9]aneN(3) (L(5)), (C(10)H(21))(3)[9]aneN(3) (L(6)), with [9]aneN(3)=1,4,7-triazacyclononane} are reported and characterised spectroscopically. Activation of [CrCl(3)(L)] with MMAO produces very active ethylene trimerisation, oligomerisation and polymerisation catalysts, with significant dependence of the product distribution upon the ligand type present. The properties of the parent [CrCl(3)(L)] complexes are probed by cyclic voltammetry, UV-visible, EPR, EXAFS and XANES measurements, and the effects upon activation with Me(3)Al investigated similarly. Treatment with excess Me(3)Al leads to substitution of Cl ligands by Me groups, generation of an EPR silent Cr species (consistent with a change in the oxidation state of the Cr to either Cr(II) or Cr(IV)) and substantial dissociation of the neutral S and S/O-donor ligands.     

Titanium tert-butoxyimido compounds

The synthesis and molecular and electronic structures of the first tert-butoxyimido complexes of titanium (TiNO(t)Bu functional group) are reported, featuring a variety of mono- or poly-dentate, neutral or anionic N-donor ligands. Reaction of Ti(NMe(2))(2)Cl(2) with (t)BuONH(2) gave good yields of Ti(NO(t)Bu)Cl(2)(NHMe(2))(2) (1). Compound 1 serves as an excellent entry point into new tert-butoxyimido complexes by reaction with a variety of fac-N(3) donor ligands, namely, Me(3)[9]aneN(3) (trimethyl-1,4,7-triazacyclononane), HC(Me(2)pz)(3) (tris(3,5-dimethylpyrazolyl)methane), or Me(3)[6]aneN(3) (trimethyl-1,3,5-triazacyclohexane) to give Ti(NO(t)Bu)(Me(3)[9]aneN(3))Cl(2) (2), Ti(NO(t)Bu){HC(Me(2)pz)(3)}Cl(2) (3), or Ti(NO(t)Bu)(Me(3)[6]aneN(3))Cl(2) (4) in good yield. It was found that 4 could be converted into Ti(NO(t)Bu)Cl(2)(py)(3) (5) in very good yield by reaction with an excess of pyridine. Compound 5 is effective in a range of salt metathesis reactions with lithiated amide or pyrrolide ligands, and reacts with Li(2)N(2)N(py), Li(2)N(2)N(Me), LiN(pyr)N(Me(2)), or Li(2)N(2)(pyr)N(Me) to give Ti(N(2)N(py))(NO(t)Bu)(py) (6), Ti(N(2)N(Me))(NO(t)Bu)(py) (7), Ti(N(pyr)N(Me(2)))(NO(t)Bu)Cl(py)(2) (9), or Ti(N(2)(pyr)N(Me))(NO(t)Bu)(py)(2) (10) in moderate to good yields (N(2)N(py) = (2-NC(5)H(4))C(Me)(CH(2)NSiMe(3))(2); N(2)N(Me) = MeN(CH(2)CH(2)NSiMe(3))(2); N(pyr)N(Me(2)) = Me(2)NCH(2)(2-NC(4)H(3)); N(2)(pyr)N(Me) = MeN{CH(2)(2-NC(4)H(3))}(2)). Compounds 7, 9, and 10 reacted with 2,2'-bipyridyl by pyridine exchange reactions forming Ti(N(2)N(Me))(NO(t)Bu)(bipy) (8), Ti(N(pyr)N(Me(2)))(NO(t)Bu)Cl(bipy) (11), and Ti(N(2)(pyr)N(Me))(NO(t)Bu)(bipy) (12). Ten tert-butoxyimido compounds, namely, 1-6, 11, and 12, have been structurally characterized revealing approximately linear Ti-N-O(t)Bu linkages with Ti-N distances [range 1.686(2)-1.734(2) ?] that are generally intermediate between those in the homologous alkylimido and phenylimido analogues, and shorter than in the diphenylhydrazido counterparts. Density functional theory (DFT) studies on the model compounds Ti(NR)Cl(2)(NHMe(2))(2) (1_R; R = OMe, Me, Ph, NMe(2)) confirmed this trend and found that the destabilizing effect of the -OMe oxygen 2p(π) lone pair on one of the Ti-N π-bonds in 1_OMe is comparable to that of the occupied phenyl ring π orbitals in the phenylimido homologue 1_Ph but much less than for the -NMe(2) nitrogen lone pair in 1_NMe(2).     

Co-ordination chemistry of amino pendant arm derivatives of 1,4,7-triazacyclononane

The binding properties of 1,4,7-triazacyclononane ([9]aneN3) to metal cations can be adapted through sequential functionalisation of the secondary amines with aminoethyl or aminopropyl pendant arms to generate ligands with increasing numbers of donor atoms. The new amino functionalised pendant arm derivative of 1,4,7-triazacyclononane ([9]aneN3), L1, has been synthesised and its salt [H2L1]Cl2 characterised by X-ray diffraction. The protonation constants of the ligands L1-L4 having one, two or three aminoethyl or three aminopropyl pendant arms, respectively, on the [9]aneN3 framework, and the thermodynamic stabilities of their mononuclear complexes with CuII and ZnII have been investigated by potentiometric measurements in aqueous solutions. In order to discern the protonation sites of ligands L1-L4, 1H NMR spectroscopic studies were performed in D2O as a function of pH. While the stability constants of the CuII complexes increase on going from L1 to L2 and then decrease on going from L2 to L3 and L4, those for ZnII complexes increase from L1 to L3 and then decrease for L4. The X-ray crystal structures of the complexes [Cu(L1)(Br)]Br, [Zn(L1)(NO3)]NO3, [Cu(L2)](ClO4)2, [Ni(L2)(MeCN)](BF4)2, [Zn(L4)](BF4)2.MeCN and [Mn(L4)](NO3)2.1/2H2O have been determined. In both [Cu(L1)(Br)]Br and [Zn(L1)(NO3)]NO3 the metal ion is five co-ordinate and bound by four N-donors of the macrocyclic ligand and by one of the two counter-anions. The crystal structures of [Cu(L2)](ClO4)2 and [Ni(L2)(MeCN)](BF4)2 show the metal centre in slightly distorted square-based pyramidal and octahedral geometry, respectively, with a MeCN molecule completing the co-ordination sphere around NiII in the latter. In both [Zn(L4)](BF4)2.MeCN and [Mn(L4)](NO3)2.1/2H2O the metal ion is bound by all six N-donors of the macrocyclic ligand in a distorted octahedral geometry. Interestingly, and in agreement with the solution studies and with the marked preference of CuII to assume a square-based pyramidal geometry with these types of ligands, the reaction of L4 with one equivalent of Cu(BF4)2.4H2O in MeOH at room temperature yields a square-based pyramidal five co-ordinate CuII complex [Cu(L6)](BF4)2 where one of the three propylamino pendant arms of the starting ligand has been cleaved to give L6.     

Ruthenium(II) polypyridyl complexes: potential precursors, metalloligands, and topo II inhibitors

Neutral and cationic mononuclear complexes containing both group 15 and polypyridyl ligands [Ru(kappa3-tptz)(PPh3)Cl2] [1; tptz=2,4,6-tris(2-pyridyl)-1,3,5-triazine], [Ru(kappa3-tptz)(kappa2-dppm)Cl]BF4 [2; dppm=bis(diphenylphosphino)methane], [Ru(kappa3-tptz)(PPh3)(pa)]Cl (3; pa=phenylalanine), [Ru(kappa3-tptz)(PPh3)(dtc)]Cl (4; dtc=diethyldithiocarbamate), [Ru(kappa3-tptz)(PPh3)(SCN)2] (5) and [Ru(kappa3-tptz)(PPh3)(N3)2] (6) have been synthesized. Complex 1 has been used as a metalloligand in the synthesis of homo- and heterodinuclear complexes [Cl2(PPh3)Ru(micro-tptz)Ru(eta6-C6H6)Cl]BF4 (7), [Cl2(PPh3)Ru(mu-tptz)Ru(eta6-C10H14)Cl]PF6 (8), and [Cl2(PPh3)Ru(micro-tptz)Rh(eta5-C5Me5)Cl]BF4 (9). Complexes 7-9 present examples of homo- and heterodinuclear complexes in which a typical organometallic moiety [(eta6-C6H6)RuCl]+, [(eta6-C10H14)RuCl]+, or [(eta5-C5Me5)RhCl]+ is bonded to a ruthenium(II) polypyridine moiety. The complexes have been fully characterized by elemental analyses, fast-atom-bombardment mass spectroscopy, NMR (1H and 31P), and electronic spectral studies. Molecular structures of 1-3, 8, and 9 have been determined by single-crystal X-ray diffraction analyses. Complex 1 functions as a good precursor in the synthesis of other ruthenium(II) complexes and as a metalloligand. All of the complexes under study exhibit inhibitory effects on the Topoisomerase II-DNA activity of filarial parasite Setaria cervi and beta-hematin/hemozoin formation in the presence of Plasmodium yoelii lysate.     

Titanium(IV) and zirconium(IV) sulfato complexes containing the Kläui tripodal ligand: molecular models of sulfated metal oxide surfaces

Treatment of titanyl sulfate in about 60 mM sulfuric acid with NaL(OEt) (L(OEt) (-)=[(eta(5)-C(5)H(5))Co{P(O)(OEt)(2)}(3)](-)) afforded the mu-sulfato complex [(L(OEt)Ti)(2)(mu-O)(2)(mu-SO(4))] (2). In more concentrated sulfuric acid (>1 M), the same reaction yielded the di-mu-sulfato complex [(L(OEt)Ti)(2)(mu-O)(mu-SO(4))(2)] (3). Reaction of 2 with HOTf (OTf=triflate, CF(3)SO(3)) gave the tris(triflato) complex [L(OEt)Ti(OTf)(3)] (4), whereas treatment of 2 with Ag(OTf) in CH(2)Cl(2) afforded the sulfato-capped trinuclear complex [{(L(OEt))(3)Ti(3)(mu-O)(3)}(mu(3)-SO(4)){Ag(OTf)}][OTf] (5), in which the Ag(OTf) moiety binds to a mu-oxo group in the Ti(3)(mu-O)(3) core. Reaction of 2 in H(2)O with Ba(NO(3))(2) afforded the tetranuclear complex (L(OEt))(4)Ti(4)(mu-O)(6) (6). Treatment of 2 with [{Rh(cod)Cl}(2)] (cod=1,5-cyclooctadiene), [Re(CO)(5)Cl], and [Ru(tBu(2)bpy)(PPh(3))(2)Cl(2)] (tBu(2)bpy=4,4'-di-tert-butyl-2,2'-dipyridyl) in the presence of Ag(OTf) afforded the heterometallic complexes [(L(OEt))(2)Ti(2)(O)(2)(SO(4)){Rh(cod)}(2)][OTf](2) (7), [(L(OEt))(2)Ti(O)(2)(SO(4)){Re(CO)(3)}][OTf] (8), and [{(L(OEt))(2)Ti(2)(mu-O)}(mu(3)-SO(4))(mu-O)(2){Ru(PPh(3))(tBu(2)bpy)}][OTf](2) (9), respectively. Complex 9 is paramagnetic with a measured magnetic moment of about 2.4 mu(B). Treatment of zirconyl nitrate with NaL(OEt) in 3.5 M sulfuric acid afforded [(L(OEt))(2)Zr(NO(3))][L(OEt)Zr(SO(4))(NO(3))] (10). Reaction of ZrCl(4) in 1.8 M sulfuric acid with NaL(OEt) in the presence Na(2)SO(4) gave the mu-sulfato-bridged complex [L(OEt)Zr(SO(4))(H(2)O)](2)(mu-SO(4)) (11). Treatment of 11 with triflic acid afforded [(L(OEt))(2)Zr][OTf](2) (12), whereas reaction of 11 with Ag(OTf) afforded a mixture of 12 and trinuclear [{L(OEt)Zr(SO(4))(H(2)O)}(3)(mu(3)-SO(4))][OTf] (13). The Zr(IV) triflato complex [L(OEt)Zr(OTf)(3)] (14) was prepared by reaction of L(OEt)ZrF(3) with Me(3)SiOTf. Complexes 4 and 14 can catalyze the Diels-Alder reaction of 1,3-cyclohexadiene with acrolein in good selectivity. Complexes 2-5, 9-11, and 13 have been characterized by X-ray crystallography.     

Synthesis, structures, and olefin polymerization capability of vanadium(4+) imido compounds with fac-N3 donor ligands

One-pot reactions of V(NMe2)4 with a range of primary alkyl- and arylamines RNH2 and Me3SiCl afforded the corresponding five-coordinate vanadium(4+) imido compounds V(NR)Cl2(NHMe2)2 [R = 2,6-C6H3(i)Pr2 (1a, previously reported), 2-C6H4(t)Bu (1b), 2-C6H4CF3 (1c), (t)Bu (1d), Ad (Ad = adamantyl, 1e)]. The crystal structures of 1b (two diamorphic forms) and 1c featured N-H...Cl hydrogen-bonded chains. Reaction of 1a-e with the neutral face-capping, N3 donor ligands TACN (TACN = 1,4,7-trimethyltriazacyclononane) or TPM [TPM = tris(3,5-dimethylpyrazolyl)methane] gave the corresponding six-coordinate complexes V(NR)(TACN)Cl2 (2a-e) and V(NR)(TPM)Cl2 (3a-e). The X-ray structures of 2b, 2c, 2d, 3b, 3c, and 3e were determined. When activated with methylaluminoxane, certain of the complexes V(NR)(TPM)Cl2 (3) formed moderately active ethylene polymerization catalysts, whereas none of the compounds V(NR)(TACN)Cl2 (2) were active.     

Preparation of five- and six-coordinate aryl(hydrido) iridium(III) complexes from benzene and functionalized arenes by C-H activation

The reaction of the in situ generated cyclooctene iridium(I) derivative trans-[IrCl(C8H14)(PiPr3)2] with benzene at 80 degrees C gave a mixture of the five-coordinate dihydrido and hydrido(phenyl) iridium(III) complexes [IrH2(Cl)(PiPr3)2] 2 and [IrH(C6H5)(Cl)(PiPr3)2] 3 in the ratio of about 1 : 2. The chloro- and fluoro-substituted arenes C6H5X (X = Cl, F), C6H4F2 and C6H4F(CH3) reacted also by C-H activation to afford the corresponding aryl(hydrido) iridium(III) derivatives [IrH(C6H4X)(Cl)(PiPr3)2] 7, 8, [IrH(C6H3F2)(Cl)(PiPr3)2] 9-11 and [IrH[C6H3F(CH3)](Cl)(PiPr3)2] 12, 13, respectively. The formation of isomeric mixtures had been detected by 1H, 13C, 19F and 31P NMR spectroscopy. Treatment of 3 and 7-13 with CO gave the octahedral carbonyl iridium(III) complexes [IrH(C6H3XX')(Cl)(CO)(PiPr3)2] 5, 14-20 without the elimination of the arene. The reactions of trans-[IrCl(C8H14)(PiPr3)2] with aryl ketones C6H5C(O)R (R = Me, Ph), aryl ketoximes C6H5C(NOH)R (R = Me, Ph) and benzaloxime C6H5C(NOH)H resulted in the formation of six-coordinate aryl(hydrido) iridium(III) compounds 21-25 with the aryl ligand coordinated in a bidentate kappa2-C,O or kappa2-C,N fashion. With C6H5C(O)NH2 as the substrate, the two isomers [IrH[kappa2-N,O-NHC(O)C6H5](Cl)(PiPr3)2] 26 and [IrH[kappa2-C,O-C6H4C(O)NH2](Cl)(PiPr3)2] 27 were prepared stepwise. Treatment of trans-[IrCl(C8H14)(PiPr3)2] with benzoic acid gave the benzoato(hydrido) complex [IrH[kappa2-O,O-O2CC6H5](Cl)(PiPr3)2] 29 which did not rearrange to the kappa2-C,O isomer.     

Mixed-metal cluster chemistry. 28. Core enlargement of tungsten-iridium clusters with alkynyl, ethyndiyl, and butadiyndiyl reagents

Reaction of [WIr3(mu-CO)3(CO)8(eta-C5Me5)] (1c) with [W(C[triple bond]CPh)(CO)3(eta-C5H5)] afforded the edge-bridged tetrahedral cluster [W2Ir3(mu4-eta2-C2Ph)(mu-CO)(CO)9(eta-C5H5)(eta-C5Me5)] (3) and the edge-bridged trigonal-bipyramidal cluster [W3Ir3(mu4-eta2-C2Ph)(mu-eta2-C=CHPh)(Cl)(CO)8(eta-C5Me5)(eta-C5H5)2] (4) in poor to fair yield. Cluster 3 forms by insertion of [W(C[triple bond]CPh)(CO)3(eta-C5H5)] into Ir-Ir and W-Ir bonds, accompanied by a change in coordination mode from a terminally bonded alkynyl to a mu4-eta2 alkynyl ligand. Cluster 4 contains an alkynyl ligand interacting with two iridium atoms and two tungsten atoms in a mu4-eta2 fashion, as well as a vinylidene ligand bridging a W-W bond. Reaction of [WIr3(CO)11(eta-C5H5)] (1a) or 1c with [(eta-C5H5)(CO)2 Ru(C[triple bond]C)Ru(CO)2(eta-C5H5)] afforded [Ru2WIr3(mu5-eta2-C2)(mu-CO)3(CO)7(eta-C5H5)2(eta-C5R5)] [R = H (5a), Me (5c)] in low yield, a structural study of 5a revealing a WIr3 butterfly core capped and spiked by Ru atoms; the diruthenium ethyndiyl precursor has undergone Ru-C scission, with insertion of the C2 unit into a W-Ir bond of the cluster precursor. Reaction of [W2Ir2(CO)10(eta-C5H5)2] with the diruthenium ethyndiyl reagent gave [RuW2Ir2{mu4-eta2-(C2C[triple bond]C)Ru(CO)2(eta-C5H5)}(mu-CO)2(CO)6(eta-C5H5)3] (6) in low yield, a structural study of 6 revealing a butterfly W2Ir2 unit capped by a Ru(eta-C5H5) group resulting from Ru-C scission; the terminal C2 of a new ruthenium-bound butadiyndiyl ligand has been inserted into the W-Ir bond. Reaction between 1a, [WIr3(CO)11(eta-C5H4Me)] (1b), or 1c and [(eta-C5H5)(CO)3W(C[triple bond]CC[triple bond]C)W(CO)3(eta-C5H5)] afforded [W2Ir3{mu4-eta2-(C2C[triple bond]C)W(CO)3(eta-C5H5)}(mu-CO)2(CO)2(eta-C5H5)(eta-C5R5)] [R = H (7a), Me (7c); R5 = H4Me (7b)] in good yield, a structural study of 7c revealing it to be a metallaethynyl analogue of 3.     

Coordinatively unsaturated W(IV)-bis(pyridine) complexes, a reactive source of W(IV)

Addition of 2 equiv of a sigma-donor ligand (L = pyridine, 4-picoline, or quinoline) to complexes of the type [W(NPh)(eta(4)-arene)(o-(Me3SiN)2C6H4)] (arene = CH3CH2C6H5 (3), CH3CH2CH2C6H5 (4)) gave the W(IV)L2 compounds, [W(NPh)(o-(Me3SiN)2C6H4)(C5H5N)2] (5), [W(NPh)(o-(Me3SiN)2C6H4)(p-C6H7N)2] (6), and [W(NPh)(o-(Me3SiN)2C6H4)(C9H7N)2] (7). Synthesis of compounds 5 and 6 by Na degrees reduction of [W(NPh)(o-(Me3SiN)2C6H4)Cl2] in the presence of 3 equiv of L (L = 5, pyridine or 6, 4-picoline) is also presented. Compounds 5, 6, and 7 display hindered rotation of the donor ligands about the W-N bonds, resulting from a steric interaction with the Me3Si groups of the diamide ligand. The coordinative unsaturation of 5 and 6 has also been explored. Compounds 5 and 6 readily react with either CO and PMe3 to generated the six coordinate complexes [W(NPh)(o-(Me3SiN)2C6H4)(C5H5N)2(CO)] (8a), [W(NPh)(o-(Me3SiN)2C6H4)(C6H7N)2(CO)] (8b), [W(NPh)(o-(Me3SiN)2C6H4)(C5H5N)(PMe3)2] (10a), and [W(NPh)(o-(Me3SiN)2C6H4)(C6H7N)(PMe3)2] (10b), respectively.     

Preparation of Ti(IV) fluoride N-heterocyclic carbene complexes

1,3,4,5-Tetramethylimidazol-2-ylidene (L(Me)) and 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene (L(iPr )) readily form complexes of trans-TiF4(L(Me))2 (1) and of trans-TiF4(L(iPr))2 (4) with TiF4 in THF, respectively. Complex 1 has been used as a precursor for preparing the Ti(IV) fluoride carbene complexes [{TiF2(L(Me))(NEt 2)}2(mu-F)2] (2) and (TiF4(L(Me))2)(NacNacLi) (3) (NacNac = HC(CMeN(2,6- iPr2C6H3))2). Complex 2 was prepared from the reaction of 1-3 equiv of 1 and 1 equiv of Ti(NEt2)4 or by reacting TiF4 with Ti(NEt2)4 and L(Me) in toluene. Complex 3 has been prepared from 1 and NacNacLi in toluene. Reaction of 1 and AlMe3 in toluene results in ligand transfer and formation of AlMe3(L(Me)). Complex 4 is unstable in solution at room temperature and degrades with formation of [HL(iPr)][TiF5(L(iPr))] (5). Complexes 1, 2.2CH2Cl2, 4, and 5 were characterized by single crystal X-ray structural analysis, elemental analysis, IR and NMR spectroscopy, and mass spectrometry. The relative basicities of L(Me), L (iPr), and the donor ligands THF, pyridine, DMSO, and H2O as well as [Cl](-) and [F](-) toward the Ti(IV) pentafluoride anion were established by NMR and confirmed by density functional theory (DFT) calculations. L(Me) and L(iPr ) are more basic than the mentioned molecular donors and more basic than chloride, however less basic than fluoride.