Poly(N,N‐dimethylacrylamide) hydrogels obtained by frontal polymerization

Frontal polymerization (FP) has been used as an alternative technique for the preparation of poly(N,N‐dimethylacrylamide) hydrogels. Samples were synthesized in bulk, water, or dimethyl sulfoxide (DMSO), and the obtained materials were characterized and compared in terms of their yield, swelling behavior, thermal properties, and morphology. It was found that their features are dependent on the presence and type of the solvent used. Samples prepared in bulk are characterized by the lowest yields and the highest front temperatures (T_max) and velocities (V_f), whereas those synthesized in water have the highest yields and the lowest values of T_max and V_f. No significant differences have been found in terms of T_g among the three series of samples. By contrast, the reaction conditions influenced the porous morphology of the samples and, consequently, their swelling capability in water. The swelling ratio ranges from about 670–700% for some samples prepared in water up to 3500% for a sample obtained in DMSO, thus indicating that this parameter can be properly tuned by using the most suitable FP conditions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1422–1428, 2009     

Polymeric nanocomposites containing polyhedral oligomeric silsesquioxanes prepared via frontal polymerization

Frontal polymerization (FP) has been successfully applied, for the first time, to obtain polymeric nanocomposites containing polyhedral oligomeric silsesquioxanes (POSS) in an amine‐cured epoxy matrix. Variations of maximum temperature (T_max) and front velocity (V_f) have been studied. A comparison of these products with the corresponding materials, obtained by the classical batch polymerization technique, demonstrated that FP allows a higher degree of conversion than batch polymerization. The products have been characterized in terms of their thermal behavior with DSC analysis. SEM and X‐ray analyses revealed the morphology and the structures of the nanocomposites. The nanocomposites obtained by FP have the same characteristics of those synthesized, in much longer times, by batch polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4514–4521, 2007     

Synthesis of versatile poly(PMMA‐b‐VI) macromonomer‐based hydrogels via infrared laser ignited frontal polymerization

In this work, poly((PMMA‐b‐VI)‐co‐AA) (MMA = methyl methacrylate; VI = 1‐vinylimidazole; AA = acrylic acid) hydrogels and poly((PMMA‐b‐VI)‐co‐AA)/TPU (TPU = thermoplastic polyurethane) IPN (interpenetrating polymer networks) hydrogels have been fabricated via versatile infrared laser ignited frontal polymerization by using poly(PMMA‐b‐VI) macromonomer as the mononer. The frontal velocity and T_max (the highest temperature that the laser beam detected at a fixed point) can be adjusted by varying monomer weight ratios, the concentration of BPO (BPO = benzoyl peroxide) and the amount of TPU. Moreover, the addition of TPU enhances the reactant viscosity to suppress the “fingering” of frontal polymerization (FP) and decrease T_max of the reaction, providing a new inert carrier (TPU) to assist FP. Through the characterization of Fourier transform‐infrared spectroscopy (FT‐IR), scanning electron microscope (SEM), and differential scanning calorimetry (DSC), the desired structure can be proved to exist in the IPN hydrogels. Furthermore, poly((PMMA‐b‐VI)‐co‐AA)/TPU IPN hydrogels possesses more excellent mechanical behaviors than hydrogels without IPN structure. Besides, the poly((PMMA‐b‐VI)‐co‐AA) hydrogels present splendid sensitive properties toward substances of different flavor including sourness (CA, citric acid or GA, gluconic acid), umami (SG, sodium glutamate), saltiness (SC, sodium chloride), sweetness (GLU, glucose), enabling their potential as artificial tongue‐like sensing materials. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1210–1221     

Synthesis and characterization of a novel polymer based on anthracene moiety for organic thin film transistor

We have designed and synthesized a new polymer, which could be used in the organic thin film transistor (OTFT). Poly[2,6‐bis(3′‐dodecythiophene‐2′‐yl)anthracene] (PDTAn), which is composed with anthracene moiety and dodecyl alkyl thiophene, was synthesized by oxidative polymerization using iron (III) chloride. The mole ratio of FeCl₃ and monomer (4.2:1), keeping low temperature during the initiation reaction, amount of solvent, and dropping order were very important for oxidative polymerization without crosslinking. The molecular weight of the polymer (M_w) was measured to be 40,000 with 2.85 of polydispersity index by GPC. The physical and optical properties of the polymer were characterized by differential scanning calorimetry (DSC), cyclic voltammetry (CV), and optical absorption and photoluminescence (PL) spectroscopy. A field‐effect mobility of 1.1 × 10^?4 cm² V^?1 S^?1, a current on/off ratio of 10⁵, and the V_th at ?15.2 V had been obtained for OTFTs using this polymer semiconductor by solution coating. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5115–5122, 2008     

Frontal polymerization synthesis and characterization of Konjac glucomannan‐graft‐acrylic acid polymers

Konjac glucomannan‐graft‐acrylic acid polymers, used as superabsorbent polymers (SAPs), were synthesized by frontal polymerization (FP). The features of front propagation including front velocity and maximum temperature (T_max) were influenced by the amount of glucomannan, initiator, and environment temperature. The graft copolymer was characterized by FTIR, DSC, and SEM. The amount of crosslinking agent mainly determined the crosslinking degree of SAPs that would affect the water absorbency and microstructure. Water absorbency of SAP was also investigated and most of them displayed high water absorption rate. The aforementioned results allow us to conclude that FP can be considered as a promising method to fabricate SAP for its excellent advantages. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3391–3398, 2009     

Structure and properties of poly(methyl methacrylate) particles prepared by a modified microemulsion polymerization

Nanoscale poly(methyl methacrylate) (PMMA) particles were prepared by modified microemulsion polymerization. Different from particles made by traditional microemulsion polymerization, the particles prepared by modified microemulsion polymerization were multichain systems. PMMA samples, whether prepared by the traditional procedure or the modified procedure, had glass-transition temperatures (T_g's) greater than 120 °C and were rich in syndiotactic content (55–61% rr). After the samples were dissolved in CHCl₃, there were decreases in the T_g values for the polymers prepared by the traditional procedure and those prepared by the modified process. However, a more evident T_g decrease was observed in the former than in the latter; still, for both, T_g was greater than 120 °C. Polarizing optical microscopy and wide-angle X-ray diffraction indicated that some ordered regions formed in the particles prepared by modified microemulsion polymerization. The addition of a chain-transfer agent resulted in a decrease in both the syndiotacticity and T_g through decreasing polymer molecular weight. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 733–741, 2004     

Renewable chain transfer agents for metallocene polymerizations: The effects of chiral monoterpenes on the polyolefin molecular weight and isotacticity

Monoterpenes were used as renewable chain transfer agents and polymerization solvents for metallocene/methylaluminoxane (MAO) catalysis. The polymerization of 1‐hexene, ethylene, and propylene in d‐limonene, hydrogenated d‐limonene and α‐pinene is reported. As detected by ¹H NMR analysis of the alkene region, chain transfer to d‐limonene yielded a higher percentage of trisubstituted alkenes. Size exclusion chromatography detected a decrease in molecular weight values resulting from chain transfer to d‐limonene. The [mmmm] pentads for isotactic polypropylene were characterized by ¹³C NMR and FTIR spectroscopy. Propylene polymerizations with the Et(Ind)₂ZrCl₂/MAO and Me₂Si(Ind)₂ZrCl₂/MAO catalyst systems in d‐limonene gave [mmmm] pentad values as high as 0.97. For the Et(Ind)₂ZrCl₂/MAO catalyst system at 0 °C, the mol fraction of [mmmm] pentads increased from 0.86 to 0.94 upon switching the solvent from toluene to d‐limonene. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3150–3165, 2007     

Atom transfer radical polymerization of methyl methacrylate catalyzed by ion exchange resin immobilized Co(II) hybrid catalyst

Ion exchange resin immobilized Co(II) catalyst with a small amount of soluble CuCl₂/Me₆TREN catalyst was successfully applied to atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in DMF. Using this catalyst, a high conversion of MMA (>90%) was achieved. And poly(methyl methacrylate) (PMMA) with predicted molecular weight and narrow molecular weight distribution (M_w/M_n = 1.09–1.42) was obtained. The immobilized catalyst can be easily separated from the polymerization system by simple centrifugation after polymerization, resulting in the concentration of transition metal residues in polymer product was as low as 10 ppm. Both main catalytic activity and good controllability over the polymerization were retained by the recycled catalyst without any regeneration process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1416–1426, 2008     

Polymerization of ethylene using a series of binuclear and a mononuclear Ni (II)‐based catalysts

A novel series of homo‐, bi‐, and mononuclear Ni(II)‐based catalysts (BNC_n n = 1–4, MNC₄) were used for ethylene polymerization. The optimum conditions for the catalyst BNC₄ (the highest catalytic activity) was obtained at [Al]/[Ni]=2000/1, T_p = 42 °C, and t_p = 20 min that was 1073 g PE/mmol Ni h. In theoretical study, steric and electronic effects of substituents and diimine backbone led to prominent influence on the catalyst behavior. The highest M_V was resulted from polymerization using BNC₄; however, the highest unsaturation content was obtained from BNC₁. GPC analysis showed a broad MWD (PDI = 17.8). BNC₁ and BNC₂ in similar structures showed broad peaks in DSC thermogram, while BNC₃ and BNC₄ with more electronic effects showed a peak along with a wide shoulder. Monomer pressure increasing showed enhancing in activity of the BNC₄, meanwhile a peak with shoulder to a single peak in DSC thermogram and uniformity in morphology of the resulted polymer were observed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3000–3011     

Growth of polystyrene films via gas‐phase polymerization with [Pd(CH3CN)4][BF4]2 thin film catalyst

The heterogeneous catalytic polymerization of styrene vapor with a tetrakis(acetonitrile)palladium(II) tetrafluoroborate, [Pd(CH₃CN)₄][BF₄]₂, thin film has been demonstrated. The catalyst is deposited by nebulization of dilute solutions onto a quartz crystal microbalance (QCM) and then exposed to styrene vapor in controlled environments. The use of QCM allows in situ monitoring of catalyst deposition and polymer growth kinetics. The polymerization process appears to involve the entire catalyst film rather than polymerization only at the catalyst film surface. The styrene vapor polymerization occurs rapidly after a short induction time needed for monomer dissolution and catalyst activation. The narrow molecular weight distribution of the produced polymer suggests that the deposited film acts as a single site catalyst. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1930–1934, 2005     

Synthesis and characterization of poly(benzodithiophene) derivative for organic thin film transistors

Poly{2,6‐bis(3‐dodecylthiophen‐2‐yl) benzo[1,2‐b;4,5‐b′]dithiophene} (PTBT) was synthesized, via oxidative polymerization by oxidative agent (FeCl₃). The mole ratio of FeCl₃ and monomer (3.5:1), and keeping low temperature during the dropping of diluted catalyst were very important for the polymerization without crosslinking. The PTBT was confirmed by ¹H NMR, FTIR spectra, and elemental analysis. The PTBT has very good solubility in organic solvents such as chloroform, tetrahydrofuran, etc, and good thermal stability with T_g of 164 °C. The PTBT shows UV‐optical absorption at 406 nm and photoluminescence (PL) spectroscopy at 504 nm in a film. The highest occupied molecular orbital (HOMO) energy of the polymer is ?5.71 eV by measuring cyclic voltammetry (CV). A solution‐processed polymer thin film transistor device shows a mobility of 3 × 10^?5 – 8 × 10^?5 cm² V^?1 s^?1, and an on/off current ratio of 10⁴. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5277–5284, 2007     

Thermoresponsive conductivity of poly(N‐isopropylacrylamide)/potassium chloride gel electrolytes

A series of thermoresponsive polymer gel electrolytes (PGEs) based on poly(N‐isopropylacrylamide) in aqueous potassium chloride was synthesized by radiation‐induced polymerization and gelation using γ rays from a ⁶⁰Co source. The electric conductivity and swelling properties of the PGE were determined as a function of temperature. It was found that the electric conductivity of the PGE depended strongly on the swelling ratio; most notably, it changed drastically near the volume phase‐transition temperature of the PGE. The temperature/conductivity profile of the PGE exhibits a maximum peak at a certain temperature that is defined as the maximum conductivity temperature (T_max). The T_max of all of the PGEs prepared by low‐dose irradiation agreed with the temperature, near the end of the volume phase transition, where the PGE was completely shrunken. Consequently, the conductivity of gels should provide a good method with which the totally shrunken temperature of the thermoresponsive gels can be monitored with good temperature precision. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 134–141, 2002     

Synthesis and characterization of organic/inorganic hybrid star polymers of 2,2,3,4,4,4‐hexafluorobutyl methacrylate and octa(aminophenyl)silsesquioxane nano‐cage made via atom transfer radical polymerization

Well‐defined organic/inorganic hybrid fluorinated star polymers were synthesized via atom transfer radical polymerization (ATRP) of 2,2,3,4,4,4‐hexafluorobutyl methacrylate (HFBMA) using octa(aminophenyl)silsesquioxane (OAPS) nano‐cage as initiator. For this purpose, OAPS was transformed into ATRP initiator by reacting with 2‐bromoisobutyrylbromide. ATR polymerization of HFBMA was carried out in trifluorotoluene at 75 °C using CuCl/2,2‐bipyridine or N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst system. GPC and ¹H NMR data confirmed the synthesis of OAPS/PHFBMA hybrid star polymer. Kinetics of the ATR polymerization of HFBMA using OAPS nano‐cage initiator was also investigated. The OAPS/PHFBMA hybrid stars were found to be molecularly dispersed in solution (THF); however, TEM micrographs revealed the formation of spherical particles of ～ 120–180 nm by the OAPS/PHFBMA hybrid star polymer after solvent evaporation. Thermal characterization of the nanocomposites by differential scanning calorimetry (DSC) revealed a slightly higher glass transition temperature (T_g) (when compared with the linear PHFBMA) of higher molecular weight OAPS/PHFBMA hybrid star polymers. In contrast, lower T_g than the linear PHFBMA was observed for OAPS/PHFBMA of relatively lower molecular weight (but higher than the linear PHFBMA). Thermal gravimetric analysis (TGA) showed a significant retardation (by ～60 °C) in thermal decomposition of nanocomposites when compared with the linear PHFBMA. Additionally, surface properties were evaluated by measuring the contact angles of water on polymer surfaces. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7287–7298, 2008     

Synthesis of novel blue‐light‐emitting polypyridine

A new regioregular head‐to‐tail (HT)‐type polypyridine with methoxyethoxyethoxy (MEEO) side chains, HT‐PMEEOPy, was synthesized by means of Kumada‐Tamao coupling polymerization of a Grignard monomer with a Ni catalyst. Although the polymer was precipitated in THF during polymerization, multiangle laser light scattering (MALLS) analysis indicated that the weight‐average molecular weight (M_w) was about 25,000. The HT content in the polymer was 95%. A solution of HT‐PMEEOPy in CHCl₃ was found to emit a strong blue light when the solution was irradiated with UV light; the UV‐vis absorption maximum (λ_max) and photoluminescence maximum (λ_{max em}) were at 392 and 460 nm, respectively. To clarify the effect of regioregularity of PMEEOPy on the photoluminescence, head‐to‐head (HH) PMEEOPy was synthesized by means of Yamamoto coupling polymerization. The photoluminescence of HH‐PMEEOPy (λ_max = 330 nm, λ_{max em} = 414 nm) was weaker than that of HT‐PMEEOPy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Temperature and pressure dependence of the free volume in the perfluorinated polymer glass CYTOP: A positron lifetime and pressure‐volume‐temperature study

The microstructure of the free volume was studied for an amorphous perfluorinated polymer (T_g = 378 K). To this aim we employed pressure–volume–temperature experiments (PVT) and positron annihilation lifetime spectroscopy (PALS). Using the Simha‐Somcynsky equation of state the hole free volume fraction h and the specific free and occupied volumes, V_f = hV and V_occ = (1 ? h)V, were determined. Their expansivities and compressibilities were calculated from fits of the Tait equation to the volume data. It was found that in the glass V_occ has a particular high compressibility, while the compressibility of V_f is rather low, although h (300 K) = 0.108 is large. In the rubbery state the free volume dominates the total compressibility. From the PALS spectra the hole size distribution, its mean, 〈v_h〉, and mean dispersion, σ_h, were calculated. From a comparison of 〈v_h〉 with V_f a constant hole density of N_h′ = 0.25 × 10²¹ g^?1 was estimated. The volume of the smallest representative freely fluctuating subsystem, 〈V_SV〉 ∝ 1/σ_h², is unusually small. This was explained by an inherent topologic disorder of this polymer. 〈v_h〉 and σ_h show an exponential‐like decrease with increasing pressure P at 298 K. The hole density, calculated from N_h′ = V_f/〈v_h〉, seems to show an increase with P which is unexpected. This was explained by the compression of holes in the glass in two, rather than three, dimensions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2519–2534, 2007     

Synthesis of poly(2‐ethylhexyl acrylate)/clay nanocomposite by in situ living radical polymerization

This investigation reports the preparation of tailor‐made poly(2‐ethylhexyl acrylate) (PEHA) prepared via in situ living radical polymerization in the presence of layered silicates and characterization of this polymer/clay nanocomposite. Being a low T_g (?65 °C) material, PEHA has very good film formation property for which it is used in paints, adhesives, and coating applications. 2‐Ethylhexyl acrylate was polymerized at 90 °C using CuBr and Cu(0) as catalyst in combination with N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) as ligand. A tremendous enhancement in reaction rate and polymerization data was achieved when acetone was added as additive to increase the efficiency of the catalyst system. PEHA/clay nanocomposite was prepared at 90 °C using CuBr as catalyst in combination with PMDETA as ligand. Different types of clay with same loading were also used to study the effect on reaction rate. The molecular weight (M_n) and polydispersity index of the prepared nanocomposites were characterized by size exclusion chromatography. The active end group of the polymer chain was analyzed by ¹H NMR analysis and by chain extension experiment. Polymer/clay interaction was studied by Fourier Transform Infrared spectrometry and wide‐angle X‐ray diffraction analyses. Distribution of clay in the polymer matrix was studied by the transmission electron microscopy. Thermogravimetric analysis showed that thermal stability of PEHA/clay nanocomposite increases on addition of nanoclay. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Detailed study of the ring-opening metathesis polymerization of norbornene bearing a five- or six-membered ring cyclic carbonate along with volume expansion

The ring-opening metathesis polymerization (ROMP) of norbornene derivatives bearing five- or six-membered cyclic carbonate ( 2 or 3 ) was carried out with a typical ruthenium catalyst [bis(tricyclohexylphosphine)benzylidene ruthenium(IV) dichloride], the so-called first-generation Grubbs catalyst, under various reaction conditions, to smoothly obtain the corresponding polyalkenamers ( 5 and 6 ) along with volume expansion. The number-average molecular weights (M_n's), 10% weight loss decomposition temperatures, glass-transition temperatures (T_g's), and volume expansion ratios of the resulting products depended on the polymerization conditions. The degree of volume expansion was mainly affected by M_n, T_g, and the cis/trans configuration of the exocyclic double bonds of the resulting polymers. The volume expansion was confirmed to specifically occur during the polymerization of the monomer bearing cyclic carbonate moieties, and similar ROMPs of monomers without cyclic carbonate, such as norbornene itself, the monomer 5,5-bis(methoxymethyl)bicyclo[2.2.1]hept-2-ene, and the monomer endo-N-methylbicyclo[2.2.1]hept-5-ene-2,3-dicarboxylimide, proceeded along with volume shrinkage. Furthermore, an investigation of another type of polymerization, a vinyl-type one, of monomer 2 suggested that the volume expansion specifically took place in the ring-opening type of polymerization. In addition, the Sc(OTf)₃-mediated cationic ring-opening reaction of the cyclic carbonate moiety of polyalkenamer 5 smoothly proceeded along with volume expansion or nearly zero volume shrinkage to yield the corresponding networked polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 395–405, 2006     

Synthesis,characterization, and thermal properties of ring‐opening metathesis polynorbornenes and their hydrogenated derivatives bearing various ester and cyano groups

Doubly functionalized polar norbornenes 3a – 3g substituted by both a variety of ester and cyano groups were polymerized by ring‐opening metathesis polymerization (ROMP) with a Ru carbene complex 2 bearing 3‐bromopyridine as a ligand (third generation Grubbs' catalyst) in a living manner. The successive hydrogenation of the main‐chain double bond in the synthesized living ROMP polymers 4a – 4g with a hydridoruthenium complex was exploited. The comparison of thermal properties of a series of ring‐opening metathesis polymers 4a – 4g with those of their hydrogenated derivatives 5a – 5g revealed the decrease of glass transition temperatures (T_g) but little change of the 5% decomposition temperature (T_d⁵). In all cases examined in this study, a decrease of T_g by hydrogenation was around 20–40 °C, regardless of the ester substitutents. In the presence of the additional PCy₃, triethylamine, and methanol after complete consumption of monomer 3a under the living ROMP condition, the tandem ROMP‐hydrogenation of the resulting polymer 4a generated in situ was attained under a H₂ (9.8 MPa) atmosphere at 80 °C to afford the hydrogenated polymer 5a , retaining the narrow polydispersity of 1.03. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3314–3325 2008     

Atom transfer radical polymerization of methyl methacrylate catalyzed by cobalt catalyst system

A new catalyst system, CoCl₂/tris(2‐(dimethyl amino) ethyl)amine (Me₆ TREN), was used to catalyze the polymerization of methyl methacrylate (MMA) successfully through atom transfer radical polymerization mechanism. The control over the polymerization was not ideal, the molecular weight distribution of the resulting polymer (PMMA) was relatively broad (M_w/M_n = 1.63–1.80). To improve its controllability, a small amount of hybrid deactivator (FeBr₃/Me₆TREN or CuBr₂/Me₆TREN) was added in the cobalt catalyst system. The results showed that the level of control over the polymerization was significantly improved with the hybrid cobalt–iron (or cobalt–copper) catalyst system; the polydispersity index of the resulting polymer was reduced to a low level (M_w/M_n = 1.15–1.46). Furthermore, with the hybrid cobalt–iron catalyst, the dependence of the propagation rate on the temperature and the copolymerization of methacrylate (MA) with PMMA‐Br as macroinitiator were also investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5207–5216, 2005     

Magnesium chloride supported high mileage catalyst for olefin polymerization. VII. Determinations of concentrations of titanium–polymer and aluminum–polymer bonds

Two methods were used in an attempt to determine by radioquenching the active site concentration, [Ti*], in a MgCl₂ supported high activity catalyst. For the reactions of tritium labelled methanol, the kinetic isotope effects were first determined: k_H/k_T = 1.63 for the total polymer and 1.67 for the isotactic polypropylene fraction. Polymerizations were quenched with an excess of isotopic CH₃OH after various lengths of time, at different A/T (amount of AlEt₃ with 0.33 equivalent of methyl-p-toluate to amount of Ti in the catalyst) ratios, and temperatures. From the known specific activity of tritium in CH₃OH and radioassay of the polymer, value of the total metal polymer bond, [MPB], can be obtained. [MPB] increases linearly with polymerization time. Extrapolation to t = 0 gives [MPB]₀, which should be close to [Ti*] because chain transfer with aluminum alkyls to produce Al–P bonds is negligible during very early stage of the polymerization. The values of [MPB]₀ range from 7–30% of the total Ti; the number of MPB is nearly equally distributed in the amorphous and isotactic fractions of polypropylene in most runs. The rate of incorporation of radioactive CO into polymers produced by the MgCl₂ supported high mileage catalyst is far slower than that claimed by some investigators for TiCl₃ type catalysts. There is an initial rapid phase of incorporation of CO which lasts for about 1 hr of contact time. The subsequent rate of CO incorporation steadily declines, yet there is no constant maximum value of radioactivity even after 48 h of reaction in the absence of monomer. Radioquenching of polymerizations with CO was also performed at several temperatures and A/T ratios. In all cases, the maximum [Ti–P] was reached after 30–40 min of polymerization, whereas the maximum rates of polymerization, R_p,m, occurred within 3–10 min. In fact, the rate of polymerization decays to a small fraction of R_p,m after 30–40 min. Furthermore, this maximum value of [Ti–P] remains constant until the end of polymerization (t = 90 min). Therefore, isotopic CO is not reacting with the initially formed active sites Ti₁*, but only with those sites, Ti₂*, which predominate during the later stage of polymerization.