Facilitated Transfer of Alkali and Alkaline‐Earth Metal Ions by a Calix[4]arene Derivative Across Water/1,2‐Dichloroethane Microinterface: Amperometric Detection of Ca2+

The host–guest complexation reactions between 5,11,17,23‐tetra‐tert‐butyl‐25,27‐diethoxycarbonylmethoxy‐26,28‐dimethoxy calix[4]arene (BDDC4) and alkali and alkaline‐earth metal ions were investigated by facilitated ion transfer processes across water/1,2‐dichloroethane microinterface by using steady‐state cyclic voltammetry and differential pulse voltammetry. The obtained facilitated transfers for Li⁺, Na⁺, K⁺, Rb⁺ and Ca²⁺ were evaluated under the different experimental conditions, at the excess concentrations of metal ions with respect to BDDC4 and vice versa. The association constants having 1 : 1 stoichiometry for Li⁺, Na⁺, K⁺ and Rb⁺ in 1,2‐DCE were determined. Also, we demonstrated that BDDC4 can play an important role for the development of highly selective chemical sensor for Ca²⁺ among alkaline‐metal ions in the concentration range of 0.1–1.0 mM in aqueous solution.     

Low‐oxidation‐potential conducting polymers derived from 3,4‐ethylenedioxythiophene and dialkoxybenzenes

Monomers derived from 3,4‐ethylenedioxythiophene and phenylenes with branched or oligomeric ether dialkoxy substituents were prepared with the Negishi coupling technique. Electrooxidative polymerization led to the corresponding dialkoxy‐substituted 3,4‐ethylenedioxythiophene–phenylene polymers, with extremely low oxidation potentials (E_1/2,p = ?0.16 to ?0.50 V vs Ag/Ag⁺) due to the highly electron‐rich nature of these materials. The polymers were electrochromic, reversibly switching from red to blue upon oxidation, with bandgaps at about 2 eV. The electrochemical behavior of the oligomeric ether‐substituted polymer was investigated in the presence of different metal ions. Films of the polymer exhibited electrochemical recognition for several alkali and alkaline‐earth cations with selectivity in the order Li⁺ > Ba²⁺ > Na⁺ > Mg²⁺. Cyclic voltammetry showed a decrease in the oxidation potential and an improvement in the definition of the voltammetric response, as well as an increase in the overall electroactivity of the polymer films when the concentration of the cations in the medium was increased. These results are discussed in terms of the electrostatic interactions between the complexed cation and the redox center, as well as the diffusion of the ionic species into the polymer matrix. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2164–2178, 2001     

Synthesis of per-O-(carboxymethyl)calix[4]pyrogallols and their complexation with some alkaline metal and lanthanide ions

Complexones of a new class, viz., carboxy-functionalized calix[4]pyrrogallols, were synthesized. The per-O-(carboxymethyl)calix[4]pyrogallols obtained were established to exist in the (rel, cis, trans, trans)-configuration by 2D NMR spectroscopic data. According to the pH-potentiometric data, the interaction of these compounds with alkaline metal ions (Li⁺, Na⁺, K⁺, Cs⁺) and lanthanide ions (La³⁺, Gd³⁺, Lu³⁺) in a water—DMSO system produces 1 : 1 complexes. The specific features of complexation of per-O-(carboxymethyl)calix[4]pyrogallols, as compared to their acyclic analogs, with alkaline metal and lanthanide ions are due to the cooperative effect of donor groups preorganized on the calixarene matrix.     

Factors Influence Complexing Selectivity of Lariat Crown Ethers Toward Alkali Metal Ions in Electrospray Ionization Mass Spectrometry

The selectivity of eight lariat crown ethers in the sym‐dibenzo‐16‐crown‐5 series toward alkali metal ions was studied with electrospray ionization mass spectrometry under different conditions. With the exception of 2g , which is equally selective toward Na⁺ and Li⁺, all other lariat crown ethers show the best selectivity toward Li⁺ in methanol. Factors that influence the selectivity include the water content, counterions, nature of the side arms, and the externally added cations. Iodide gives the best Na⁺ selectivity with R_I > R_Br > R_Cl. Increased water content profoundly increases the Na⁺ selectivity when the side arm is hydrophilic and the steric hindrance is small. Externally added cations (Cs⁺ and/or Rb⁺) enhance the Na⁺ selectivity by exchanging the smaller Li⁺ from the cavity.     

Synthesis of a novel poly(para‐phenylene ethynylene) for highly selective and sensitive sensing mercury (II) ions

A new poly(p‐phenylene ethynylene) derivative with pendant 2,2′‐bipyridyl groups and glycol units (PPE‐bipy) has been prepared, and its metal ion sensing properties were investigated. The polymer of PPE‐bipy exhibited high selectivity for Hg²⁺ as compared with Li⁺, Na⁺, K⁺, Ba²⁺, Ca²⁺, Mg²⁺, Al³⁺, Mn²⁺, Ag⁺, Zn²⁺, Pb²⁺, Ni²⁺, Cd²⁺, Cu²⁺, Co,²⁺ and Fe³⁺ in THF/EtOH (1:1, v/v) solution. The fluorescence of PPE‐bipy was efficiently quenched by Hg²⁺ ions, and the detection limit was found to be 8.0 nM in a THF/EtOH (1:1, v/v) solvent system. PPE‐bipy also showed a selective chromogenic behavior toward Hg²⁺ ions by changing the color of the solution from slight yellow to colorless, which can be detected with the naked eye. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1998–2007, 2008     

Ion Chromatography on Poly(Crown Ether)-Modified Silica Possessing High Affinity For Sodium

Abstract

Stationary phases which have great affinity for Na⁺ were synthesized by incorporating 12-crown-4 polymer on silica gel for liquid chromatography of alkali and alkaline-earth metal ions. The stationary phases interact with Na+ most strongly of all alkali metal ions as expected, and the retention times on liquid chromatography of alkali metal ions were in the sequence Li⁺ < Cs⁺ < Rb⁺ < K⁺ < Na⁺. On the stationary phase, a mixture of Li⁺, Na⁺, and K⁺ can be separated completely by the elution with water/methanol mixture. By the use of spherical type silica gel instead of irregular type one and by effective end-capping of the residual silanol groups, the peak symmetry was improved significantly.     

Selective Complexation of S‐block Cations with Nanotubular Silk Type Cyclopeptides: A DFT Study

Density functional theory (DFT) was used to study the interaction of alkali metal cations (Li⁺, Na⁺ and K⁺) with cyclic peptides constructed from silk type macrocycles ( Silk1, Silk2, Silk3, Silk4, Silk5 and Silk6 ). The calculated binding energies were used as a base for investigating the selectivity of the cyclic peptides in biniding to considered metals ions. The highest cation selectivity for Li⁺ compared to the other alkali metal ions was observed. The orbital nature of different interactions between the metal cations and the cyclic peptides was analyzed using NBO analysis. The main types of driving force for host‐guest interactions was investigated and it was found that the electron‐donating O offers lone pair electrons to the contacting LP* of alkali metal cations     

Metal‐cation‐induced chiroptical switching for poly(phenylacetylene) bearing a macromolecular ionophore as a graft chain

A poly(phenylacetylene) bearing a polycarbohydrate ionophore as a graft chain (copolymer 4 ) was synthesized by the copolymerization of end‐functionalized (1→6)‐2,5‐anhydro‐3,4‐di‐O‐ethyl‐D ‐glucitol with a 4‐ethynylbenzoyl group (macromonomer 2 ) with phenylacetylene. Copolymer 4 showed a split‐type circular dichroism (CD) in the long absorption region of the conjugated polymer backbone (280–500 nm), and the CD pattern varied in response to external stimuli, such as the solvents and temperature. This suggested that 4 had a predominantly one‐handed helical conformation in the polyacetylene backbone. The CD pattern of 4 was completely inverted by the formation of a complex between the macromolecular ionophore units and the selected metal cations, that is, Ba²⁺, Pb²⁺, Sr²⁺, Na⁺, and Li⁺. This suggested that copolymer 4 underwent a helix–helix transition through the host–guest complexation with achiral inorganic metal cations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5855–5863, 2005     

Facilitated Transfer of Alkali Metal Ions by a Tetraester Derivative of Thiacalix[4]arene at the Liquid–Liquid Interface

The facilitated transfer of alkali metal ions (Na⁺, K⁺, Rb⁺, and Cs⁺) by 25,26,27,28‐tetraethoxycarbonylmethoxy‐thiacalix[4]arene across the water/1,2‐dichloroethane interface was investigated by cyclic voltammetry. The dependence of the half‐wave transfer potential on the metal and ligand concentrations was used to formulate the stoichiometric ratio and to evaluate the association constants of the complexes formed between ionophore and metal ions. While the facilitated transfer of Li⁺ ion was not observed across the water/1,2‐dichloroethane interface, the facilitated transfers were observed by formation of 1 : 1 (metal:ionophore) complex for Na⁺, K⁺, and Rb⁺ ions except for Cs⁺ ion. In the case of Cs⁺ a 1 : 2 (metal:ionophore) complex was obtained from its special electrochemical response to the variation of ligand concentrations in the organic phase. The logarithms of the complex association constants, for facilitated transfer of Na⁺, K⁺, Rb⁺, and Cs⁺, were estimated as 6.52, 7.75, 7.91 (log β₁°), and 8.36 (log β₂°), respectively.     

Oligoether‐Strapped Calix[4]pyrrole: An Ion‐Pair Receptor Displaying Cation‐Dependent Chloride Anion Transport

A ditopic ion‐pair receptor ( 1 ), which has tunable cation‐ and anion‐binding sites, has been synthesized and characterized. Spectroscopic analyses provide support for the conclusion that receptor 1 binds fluoride and chloride anions strongly and forms stable 1:1 complexes ([ 1? F]^? and [ 1? Cl]^?) with appropriately chosen salts of these anions in acetonitrile. When the anion complexes of 1 were treated with alkali metal ions (Li⁺, Na⁺, K⁺, Cs⁺, as their perchlorate salts), ion‐dependent interactions were observed that were found to depend on both the choice of added cation and the initially complexed anion. In the case of [ 1? F]^?, no appreciable interaction with the K⁺ ion was seen. On the other hand, when this complex was treated with Li⁺ or Na⁺ ions, decomplexation of the bound fluoride anion was observed. In contrast to what was seen with Li⁺, Na⁺, K⁺, treating [ 1?F ]^? with Cs⁺ ions gave rise to a stable, host‐separated ion‐pair complex, [F ?1? Cs], which contains the Cs⁺ ion bound in the cup‐like portion of the calix[4]pyrrole. Different complexation behavior was seen in the case of the chloride complex, [ 1? Cl]^?. Here, no appreciable interaction was observed with Na⁺ or K⁺. In contrast, treating with Li⁺ produces a tight ion‐pair complex, [ 1? Li ? Cl], in which the cation is bound to the crown moiety. In analogy to what was seen for [ 1? F]^?, treatment of [ 1? Cl]^? with Cs⁺ ions gives rise to a host‐separated ion‐pair complex, [Cl ?1? Cs], in which the cation is bound to the cup of the calix[4]pyrrole. As inferred from liposomal model membrane transport studies, system 1 can act as an effective carrier for several chloride anion salts of Group 1 cations, operating through both symport (chloride+cation co‐transport) and antiport (nitrate‐for‐chloride exchange) mechanisms. This transport behavior stands in contrast to what is seen for simple octamethylcalix[4]pyrrole, which acts as an effective carrier for cesium chloride but does not operates through a nitrate‐for‐chloride anion exchange mechanism.     

Diastereochemical differentiation of bicyclic diols using metal complexation and collision‐induced dissociation mass spectrometry

Metal complex formation was investigated for di‐exo‐, di‐endo‐ and trans‐2,3‐ and 2,5‐disubstituted trinorbornanediols, and di‐exo‐ and di‐endo‐ 2,3‐disubstituted camphanediols using different divalent transition metals (Co²⁺, Ni²⁺, Cu²⁺) and electrospray ionization quadrupole ion trap mass spectrometry. Many metal‐coordinated complex ions were formed for cobalt and nickel: [2M+Met]²⁺, [3M+Met]²⁺, [M–H+Met]⁺, [2M–H+Met]⁺, [M+MetX]⁺, [2M+MetX]⁺ and [3M–H+Co]⁺, where M is the diol, Met is the metal used and X is the counter ion (acetate, chloride, nitrate). Copper showed the weakest formation of metal complexes with di‐exo‐2,3‐disubstituted trinorbornanediol yielding only the minor singly charged ions [M–H+Cu]⁺, [2M–H+Cu]⁺ and [2M+CuX]⁺. No clear differences were noted for cobalt complex formation, especially for cis‐2,3‐disubstituted isomers. However, 2,5‐disubstituted trinorbornanediols showed moderate diastereomeric differentiation because of the unidentate nature of the sterically more hindered exo‐isomer. trans‐Isomers gave rise to abundant [3M–H+Co]⁺ ion products, which may be considered a characteristic ion for bicyclo[221]heptane trans‐2,3‐ and trans‐2,5‐diols. To differentiate cis‐2,3‐isomers, the collision‐induced dissociation (CID) products for [3M+Co]²⁺, [M+CoOAc]⁺, [2M–H+Co]⁺ and [2M+CoOAc]⁺ cobalt complexes were investigated. The results of the CID of the monomeric and dimeric metal adduct complexes [M+CoOAc]⁺ and [2M–H+Co]⁺ were stereochemically controlled and could be used for stereochemical differentiation of the compounds investigated. In addition, the structures and relative energies of some complex ions were studied using hybrid density functional theory calculations. Copyright © 2009 John Wiley & Sons, Ltd.     

ACE applied to the quantitative characterization of benzo‐18‐crown‐6‐ether binding with alkali metal ions in a methanol–water solvent system

ACE was applied to the quantitative evaluation of noncovalent binding interactions between benzo‐18‐crown‐6‐ether (B18C6) and several alkali metal ions, Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺, in a mixed binary solvent system, methanol–water (50/50 v/v). The apparent binding (stability) constants (K_b) of B18C6–alkali metal ion complexes in the hydro‐organic medium above were determined from the dependence of the effective electrophoretic mobility of B18C6 on the concentration of alkali metal ions in the BGE using a nonlinear regression analysis. Before regression analysis, the mobilities measured by ACE at ambient temperature and variable ionic strength of the BGE were corrected by a new procedure to the reference temperature, 25°C, and the constant ionic strength, 10 mM . In the 50% v/v methanol–water solvent system, like in pure methanol, B18C6 formed the strongest complex with potassium ion (log K_b=2.89±0.17), the weakest complex with cesium ion (log K_b=2.04±0.20), and no complexation was observed between B18C6 and the lithium ion. In the mixed methanol–water solvent system, the binding constants of the complexes above were found to be about two orders lower than in methanol and about one order higher than in water.     

A visible light responsive azobenzene‐functionalized polymer: Synthesis,self‐assembly,and photoresponsive properties

A novel visible light responsive random copolymer consisting of hydrophobic azobenzene‐containing acrylate units and hydrophilic acrylic acid units has been prepared. The azobenzene molecule bearing methoxy groups at all four ortho positions is readily synthesized by one‐step conversion of diazotization. The as‐prepared polymer can self‐assemble into nanoparticles in water due to its amphiphilic nature. The tetra‐o‐methoxy‐substituted azobenzene‐functionalized polymer can exhibit the trans‐to‐cis photoswitching under the irradiation with green light of 520 nm and the cis‐to‐trans photoswitching under the irradiation with blue light of 420 nm in both solution and aggregate state. The morphologies of the self‐assembled nanoparticles are revealed by TEM and DLS. The controlled release of loaded molecules from the nanoparticles can be realized by adjusting pH value since the copolymer possesses pH responsive acrylic acid groups. The fluorescence of loaded Nile Red in the nanoparticles can be tuned upon the visible light irradiation. The reversible photoswitching of the azobenzene‐functionalized polymer under visible light may endow the polymer with wide applications without using ultraviolet light at all. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2768–2775     

Determination of orders of relative alkali metal ion affinities of crown ethers and acyclic analogs by the kinetic method

Ladders of relative alkali ion affinities of crown ethers and acyclic analogs were constructed by using the kinetic method. The adducts consisting of two different ethers bound by an alkali metal ion, (M₁ + Cat + M₂)⁺, were formed by using fast atom bombardment ionization to desorb the crown ethers and alkali metal ions, then collisionally activated to induce dissociation to (M₁ + Cat)⁺ and (M₂ + Cat)⁺ ions. Based on the relative abundances of the cationized ethers formed, orders of relative alkali ion affinities were assigned. The crown ethers showed higher affinities for specific sizes of metal ions, and this was attributed in part to the optimal spatial fit concept. Size selectivities were more pronounced for the smaller alkali metal ions such as Li⁺, Na⁺, and K⁺ than the larger ions such as Cs⁺ and Rb⁺. In general, the cyclic ethers exhibited greater alkali metal ion affinities than the corresponding acyclic analogs, although these effects were less dramatic as the size of the alkali metal ion increased.     

A Black Phosphorus–Graphite Composite Anode for Li‐/Na‐/K‐Ion Batteries

Black phosphorus (BP) is a desirable anode material for alkali metal ion storage owing to its high electronic/ionic conductivity and theoretical capacity. In‐depth understanding of the redox reactions between BP and the alkali metal ions is key to reveal the potential and limitations of BP, and thus to guide the design of BP‐based composites for high‐performance alkali metal ion batteries. Comparative studies of the electrochemical reactions of Li⁺, Na⁺, and K⁺ with BP were performed. Ex situ X‐ray absorption near‐edge spectroscopy combined with theoretical calculation reveal the lowest utilization of BP for K⁺ storage than for Na⁺ and Li⁺, which is ascribed to the highest formation energy and the lowest ion diffusion coefficient of the final potassiation product K₃P, compared with Li₃P and Na₃P. As a result, restricting the formation of K₃P by limiting the discharge voltage achieves a gravimetric capacity of 1300 mAh g^?1 which retains at 600 mAh g^?1 after 50 cycles at 0.25 A g^?1.     

Nanospheres,Nanotubes, Toroids,and Gels with Controlled Macroscopic Chirality

The interaction of a highly dynamic poly(aryl acetylene) (poly‐ 1 ) with Li⁺, Na⁺_, and Ag⁺ leads to macroscopically chiral supramolecular nanospheres, nanotubes, toroids, and gels. With Ag⁺, nanospheres with M helicity and tunable sizes are generated, which complement those obtained from the same polymer with divalent cations. With Li⁺ or Na⁺, poly‐ 1 yields chiral nanotubes, gels, or toroids with encapsulating properties and M helicity. Right‐handed supramolecular structures can be obtained by using the enantiomeric polymer. The interaction of poly‐ 1 with Na⁺ produces nanostructures whose helicity is highly dependent on the solvation state of the cation. Therefore, structures with either of the two helicities can be prepared from the same polymer by manipulation of the cosolvent. Such chiral nanotubes, toroids, and gels have previously not been obtained from helical polymer–metal complexes. Chiral nanospheres made of poly(aryl acetylene) that were previously assembled with metal(II) species can now be obtained with metal(I) species.     

Cationization of dendritic macromolecule adsorbates on metals studied by time‐of‐flight secondary ion mass spectrometry

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) was utilized to study dendritic macromolecules with various architectures, such as dendrons, dendrimers and hyperbranched polyesters prepared from bis‐(hydroxymethyl)propionic acid (Bis‐MPA) and a series of hyperbranched polyethers based on 3‐ethyl‐3(hydroxymethyl)oxetane. The measurements were performed on spin‐coated thin films of the branched molecules (D) onto silicon, chemically etched copper foil and silver‐coated wafers. They showed weak signatures of molecular ions by proton capture (D + H)⁺ in the high mass range of the spectra (m/z > 400). On the contrary, cationization of the intact molecules with alkali or transition metal ions such as Na⁺, Cu⁺ or Ag⁺ was observed. High‐intensity quasi‐molecular ions (D + M)⁺ (with M = Na⁺, Cu⁺ or Ag⁺) allowed the studied polymers to be identified. The whole molecular species were observed for Bis‐MPA dendrons and dendrimers up to 3000 Da for hydroxyl or acetonide‐terminated derivatives. The success of the so‐called cationization experiments with metal substrates compared with analysis of molecular adsorbates on silicon is highlighted. The ToF‐SIMS sensitivity appeared useful to provide information about the molecular end‐groups or to highlight incomplete reaction occurring during some deprotection step of the synthesis. Only uncationized fragments of low masses were detected for the hyperbranched polyesters. This result suggested the effect of molecular asymmetry and/or flattening of the molecules on the substrates, which hampered the molecule lift‐off efficiency. Nevertheless, the hyperbranched polyethers were characterized based on the peak distribution of intensities, which allowed estimation of their molecular weight average. This work was intended to illustrate the capabilities of ToF‐SIMS to analyse dendritic polymers on surfaces. Copyright © 2003 John Wiley & Sons, Ltd.     

An Ab Initio MO Study on Orbital Interaction and Charge Distribution in Alkali Metal Aqueous Solution: Li+, Na+, and K+

The analysis of the orbital interaction between an alkali metal ion and the surrounding solvent molecules is performed for aqueous solutions of Li⁺, Na⁺, and K⁺, by means of the ab initio MO method with the aid of the quantum mechanical (QM)/molecular mechanics (MM) method. A total of 171 water molecules are included for each system. The effect of Li⁺ orbitals reaches as far as 6 Å 7 Å for Na⁺; and 9 Å for K⁺. This effect is caused by the orbital interactions between the valence orbitals of an alkali metal ion and of the surrounding water molecules. The electrostatic interaction and the orbital interaction must not be neglected. The difference in the effect between the alkali metal ions originates from the difference in the valence orbital extensions of the alkali metal ions.     

一种基于硫杂杯[4]芳烃的高效银离子载体

合成了基于下缘含有酰肼基团的硫杂杯芳烃衍生物的银离子载体1,其核磁研究证实硫杂杯芳烃以1,3-交替构象存在,并且通过非竞争萃取实验和竞争萃取实验研究了它对碱金属和过渡金属离子（Li⁺, Na⁺, K⁺, Cs⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Ag⁺）的键合能力和选择性。实验结果表明：将酰肼基团引入1,3-交替构象的硫杂杯芳烃骨架的下缘可以提高其对Ag⁺的键合能力和选择性,同时,对Cu²⁺的萃取能力较弱,对碱金属离子和其它的重金属离子几乎没有萃取能力。进一步的核磁滴定和电喷雾质谱实验显示化合物1与银离子形成配合物的配合计量比为1：1,由此推断主要由“N-Ag⁺”配位键以及硫杂杯芳烃骨架的协同作用构成了化合物1与银离子的配合模式。