Designing poly(amido amine) dendrimers containing core diversities by click chemistry of the propargyl focal point poly(amido amine) dendrons

General, fast, efficient, and inexpensive methods for the synthesis of poly (amido amine) (PAMAM) dendrimers having core diversities were elaborated. In all syntheses, the major step involved an inexpensive 1,3‐dipolar cycloaddition reaction between an alkyne and an azide in the presence of Cu(I) species, which is known as the best example of click chemistry. The propargyl‐functionalized PAMAM dendrons are obtained by the divergent approach using propargylamine as an alkyne‐focal point. Three core building blocks, 1,3,5‐tris(azidomethyl)benzene, N,N,N′,N′‐tetra(azidopropylamidoethyl)‐1,2‐diaminoethane, and 4,4′‐(3,5‐bis(azidopropyloxy)benzyloxy)bisphenyl, were designed and synthesized to serve as the azide functionalities for dendrimer growth via click reactions with the alkyne‐dendrons. These three building blocks were employed together with the propargyl‐functionalized PAMAM dendrons in a convergent strategy to synthesize three kinds of PAMAM dendrimers with different core units. This novel and pivotal strategy using an efficient click methodology provides the fast and efficient synthesis of the PAMAM dendrimers with the tailed made core units. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1083–1097, 2008     

Cinnamoyl shell‐modified poly(amidoamine) dendrimers

Poly(amidoamine)(PAMAM) dendrimers with a cinnamoyl shell were prepared by reacting full generation PAMAM dendrimers (G=3.0) with 2‐chloroethanol and cinnamoyl chloride, which resulted in densely packed polymerizable unsaturated groups on the periphery. The cinnamoyl shell of the dendrimers dimerized when irradiated under a UV light by using 5‐nitroacenaphthylene as an initiator in dilute dimethylformamide (DMF). FTIR, ¹H NMR, UV‐Vis, SEC, and a viscosity test certified that the photocycloaddition of the cinnamoyl shell of the dendrimers took place within the molecules with the disappearance of double bond signals in the FTIR. ¹H NMR spectra as well as the intrinsic viscosity and polydispersity value of the products both before and after irradiation showed no difference. It was further found that the cinnamoyl shell‐modified dendrimers possessed fluorescence property, and the fluorescence intensity became stronger when the shell was photocyclized under UV‐ irradiation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4147–4153, 2000     

Photoresponsive nanocarriers based on PAMAM dendrimers with a o‐nitrobenzyl shell

Gn (n = 3, 4, and 5) poly(amidoamine) (PAMAM) dendrimers were synthesized and peripherally modified with photocleavable o‐nitrobenzyl (NB) groups by reacting o‐nitrobenzaldehyde with the terminal amine groups of PAMAM dendrimers, followed by reducing the imine to amine groups with NaBH₄. The NB‐modified dendrimers, Gn‐NB (n = 3, 4, and 5), were characterized by nuclear magnetic resonance and fourier transform infrared spectroscopy. The results showed that the NB groups were successfully attached on the periphery of the dendrimers with near 100% grafting efficiency. Such a photosensitive NB shell could be cut off on irradiation with 365 nm ultraviolet (UV) light. The encapsulation and release of guest molecules, that is, salicylic acid (SA) and adriamycin (ADR), by Gn‐NB were explored. The encapsulation capability of these dendrimers was found to increase as the guest molecular size was decreased and have dependence on the generation of dendrimers as well. For both of SA and ADR, the average encapsulation numbers per dendrimer decreased in the order of G4‐NB > G5‐NB > G3‐NB, indicating that the fourth generation dendrimer was a better container for the guest molecules. The rate of SA release was found to be greater with UV irradiation than that without, suggesting that the NB‐shelled PAMMAM dendrimers could function as a molecular container/box with photoresponsive characteristics. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 551–557, 2010     

Self‐assembly of a new class of amphiphilic poly(amidoamine) dendrimers and their electrochemical properties

Amphiphilic poly(amidoamine) (PAMAM) dendrimers consisting of a hydrophilic dendrimer core and hydrophobic aromatic dansyl or 1‐(naphthalenyl)‐2‐phenyldiazene (NPD) shells have been synthesized. These amphiphilic dendrimers from the zero generation to the third generation self‐assemble into vesicular aggregates in water. The self‐assembly behavior of these dendrimers strongly depends on their generations. The generation dependence has been further investigated by an exploration of their electrochemical properties. For the PAMAM–NPD aggregates, the photoisomerization process leads to a change in the aggregate size. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5512–5519, 2005     

Synthesis of steroidal dendrimers modified by ‘click’ chemistry with PAMAM dendrons as unimolecular micelles

Novel Fréchet–PAMAM hybrid dendrimers linked by triazole units as unimolecular micelles with a hydrophobic core surrounded by a hydrophilic shell were prepared. The dendritic cores with 3 and 6 alkyne terminal groups were synthesized from 1,3,5-tribromomethyl-benzene (tBrMeB), in one case by direct coupling with 17α-ethynylestradiol (EE); in the second one the tBrMeB was reacted with bis(hydroxymethyl) phenol followed by chlorination of the hydroxyl groups and subsequent coupling to EE. With this strategy, the core can be grown by further substitutions of bis(hydroxymethyl) phenol over the halogenated terminals as Fréchet dendrimer. The hydrophilic shells used were PAMAM type dendrons of 0.5 and 1.5 generations with azide as focal point and tert-butyl ester as end groups. The unimolecular micelles were obtained by cycloaddition between an azide in the selected dendron and the alkyne terminal in the hydrophobic core to obtain a 1,4-disubstituted 1,2,3-triazole. Once the coupling was achieved, the tert-butyl ester groups were hydrolyzed in trifluoroacetic acid and the corresponding dendrimers with carboxylic acid as end groups were completely soluble in phosphate buffer solutions of pH 7.0, 7.4, and 8.0. All hybrid dendrimers were characterized by High Resolution Mass Spectrometry, ¹H and ¹³C NMR, and FTIR.     

Core extractable nano‐objects: Manipulating triblock copolymer micelles

We report manipulation of polymer nano‐objects by changing solvents through chemically crosslinking the spherical micelles of poly(3‐(triethoxysilyl)propyl methacrylate)‐block‐polystyrene‐block‐poly(2‐vinylpyridine) (PTEPM‐b‐PS‐b‐P2VP). In methanol, which is a common solvent of PTEPM and P2VP but poor of PS, PTEPM‐b‐PS‐b‐P2VP forms micelles with a PS core. When changing the medium into acidic water, the PTEPM segments further collapse and gelate to form a crosslinked shell outside of the PS core. When the particles are re‐dispersed into tetrahydrofuran (THF), the PS segments are extracted out, producing uniform small cavity of few nanometers in each particle. Thus one sample can be used to generate well‐defined nano‐objects with different appearance by solvent manipulation. The particle structure development has been characterized by transmission electron microscope (TEM), DLS, and ¹H NMR. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

UV‐photodimerization in uracil‐substituted dendrimers for high density data storage

Two series of uracil‐functionalized dendritic macromolecules based on poly (amidoamine) PAMAM and 2,2‐bis(hydroxymethylpropionic acid) bis‐MPA backbones were prepared and their photoinduced (2π+2π) cycloaddition reactions upon exposure to UV light at 257 nm examined. Dendrimers up to 4th generation were synthesized and investigated as potential materials for high capacity optical data storage with their dimerization efficiency compared to uracil as a reference compound. This allows the impact of increasing the generation number of the dendrimers, both the number of chromophores, as well as the different steric environments, on the performance of each series of dendrimers to be investigated. The (uracil)₁₂‐[G‐2]‐bis‐MPA and (uracil)₈‐[G‐1]‐PAMAM were observed to have high dimerization efficiency in solution with different behavior being observed for the PAMAM and bis‐MPA dendrimers. The dendrimers with the best dimerization efficiency in solution were then examined in the solid state as thin films cast on quartz plates, and their film qualities along with their photodimerization performance studied. High quality films with a transmission response of up to 70% in 55 s. when irradiated at 257 nm with an intensity of 70 mW/cm² could be obtained suggesting future use as recording media for optical data storage. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4401–4412, 2007     

Surface functionalized nano‐objects from oleic acid‐derived stabilizer via non‐polar RAFT dispersion polymerization

Surface functionalization in a nanoscopic scaffold is highly desirable to afford nano‐particles with diversified features and functions. Herein are reported the surface decoration of dispersed block copolymer nano‐objects. First, side‐chain double bond containing oleic acid based macro chain transfer agent (macroCTA), poly(2‐(methacryloyloxy)ethyl oleate) (PMAEO), was synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization and used as a steric stabilizer during the RAFT dispersion block copolymerization of benzyl methacrylate (BzMA) in n‐heptane at 70 °C. We have found that block copolymer morphologies could evolve from spherical micelles, through worm to vesicles, and finally to large compound vesicles with the increase of solvophobic poly(BzMA) block length, keeping solvophilic chain length and total solid content constant. Finally, different thiol compounds having alkyl, carboxyl, hydroxyl, and protected amine functionalities have been ligated onto the PMAEO segment, which is prone to functionalization via its reactive double bond through thiol‐ene radical reactions. Thiol‐ene modification reactions of the as‐synthesized nano‐objects retain their morphologies as visualized by field emission‐scanning electron microscopy. Thus, the facile and modular synthetic approach presented in this study allowed in situ preparation of surface modified block copolymer nano‐objects at very high concentration, where renewable resource derived oleate surface in the nanoparticle was functionalized. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 263–273     

A Penicillamine Biosensor Based on Tyrosinase Immobilized on Nano‐Au/ PAMAM Dendrimer Modified Gold Electrode

Gold electrodes were modified with submonolayers of 3‐mercaptopropionic acid and further reacted with poly(amidoamine) (PAMAM) dendrimers to obtain thin films. The high affinity of PAMAM dendrimer for nano‐Au with its amine groups was used to realize the role of nano‐Au as an intermediator to immobilize the enzyme of tyrosinase. The characterization of the modified electrode was investigated by cyclic voltammetry, electrochemical impedance spectroscopy and atomic force microscopy (AFM). Tyrosinase can catalyze the oxidation of catechol to o‐benzoquinone. When penicillamine was added to the solution, it reacted with o‐benzoquinone to form the corresponding thioquinone derivatives, which resulted in decrease of the reduction current of o‐benzoquinone. Based on this, a new electrochemical sensor for determination of penicillamine has been developed.     

Synthesis of Poly(3,4‐ethylenedioxythiophene) latexes using poly(N‐vinylpyrrolidone)‐based copolymers as reactive stabilizers

The synthesis by oxidative polymerization of well‐defined poly(3,4‐ethylenedioxythiophene) (PEDOT) nano‐objects in the presence of modified and unmodified poly(N‐vinylpyrrolidone)‐based copolymers used as stabilizers in aqueous media is reported. Ammonium persulfate or a mixture of ammonium persulfate with CuCl₂ or CuBr₂ was used as oxidants. The effects of several parameters such as the molar mass and the concentration of the stabilizer as well as the nature of the oxidants on the size, morphology, and the conductivity of the PEDOT particles have been investigated. The distribution of the reactive moieties along the copolymer stabilizer backbone was shown to be crucial to get well‐defined PEDOT nano‐objects. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3841–3855, 2010     

Preparation and characterization of silicone rubber through the reaction between γ‐chloropropyl and amino groups with siloxane polyamidoamine dendrimers as cross‐linkers

A novel heat‐curable silicone rubber (MCSR/Si‐PAMAM) was prepared by using siloxane polyamidoamine (Si‐PAMAM) dendrimers as cross‐linkers and polysiloxane containing γ‐chloropropyl groups as gums. The chemical cross‐linking occurs through the reaction between Si‐PAMAM dendrimers and polysiloxane containing γ‐chloropropyl groups. The effect of various amounts of cross‐linkers on mechanical properties of MCSR/Si‐PAMAM was discussed in this paper. MCSR/Si‐PAMAM exhibits favorable mechanical properties with a tensile strength of 10.06 MPa and a tear strength of 47.9 kN/m when the molar ratio r of [N‐H]/[CH₂CH₂CH₂Cl] is 1:1. These excellent mechanical properties can be attributed to the formation of concentrative cross‐linking from Si‐PAMAM dendrimers in the cross‐linking networks, along with the introduction of Si–O–Si units in the internal structure of dendrimers. The introduction of Si–O–Si units reduces the steric hindrance of molecular structure, which facilitates the N–H bonds in the interior layers of dendrimers to react with γ‐chloropropyl groups. In addition, thermogravimetric analysis results indicate that MCSR/Si‐PAMAM is thermally stable even at high temperatures in a nitrogen atmosphere. Differential scanning calorimetry analysis reveals that the glass transition peak of MCSR/Si‐PAMAM is not identified in the temperature range −150 to −30°C, only a melting endothermic peak at −40°C.     

Ester‐ and amide‐terminated dendrimers with alternating amide and ether generations

Ester‐terminated polyamide dendrimers up to the third generation and amide‐terminated polyamide dendrimers of the first generation were synthesized by convergent growth. The Williamson ether synthesis and diphenylphosphoryl azide (DPPA) coupling of amines to carboxylic acids were used for the construction of the dendrimers, having alternate ether and amide generations. The methyl ester‐ and N,N‐diethylamide‐terminated dendrimers were readily soluble in common organic solvents while the N‐methylamide‐ and N‐benzylamide‐terminated dendrimers were soluble only in DMF and DMSO. Both the end and internal amide groups of the N,N‐diethylamide‐terminated dendrimer were reduced by LiAlH₄ to form a polyamine dendrimer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1533–1543, 2000     

Synthesis of anionic carbosilane dendrimers via “click chemistry” and their antiviral properties against HIV

The synthesis and characterization of four families of anionic carbosilane dendrimers bearing carboxylate, phosphonate, naphthylsulfonate, and sulfate terminal groups prepared by cycloaddition of azide–alkyne catalyzed by copper (CuAAC) are presented here. For the preparation of these anionic carbosilane dendrimers, two strategies starting from azide‐terminated carbosilane dendrimers were followed: (i) click coupling of neutral alkynes followed by derivatization into anionic moieties or (ii) click coupling of anionic alkynes. Both strategies require different reaction conditions in order to accommodate the different substrate polarities. These anionic dendrimers, in general, do not present cell toxicity in vitro until concentration up to 20 µM. Therefore, they can be used in inhibition experiments in concentrations below this limit. We have observed that dendrimers bearing phosphonate groups possess poor anti‐HIV capabilities in vitro in PBMCs, while carboxylate dendrimers can reduce HIV infection levels moderately. On the other hand, sulfate and naphthylsulfonate dendrimers are powerful anti‐HIV agents and their antiviral activity is generation and concentration dependent. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1099–1112     

Optically active core/shell nanoparticles prepared using self‐assembled polymer micelle as reactive nanoreactor

This article reports on optically active core/shell nanoparticles constituted by chiral helical polymers and prepared by a novel approach: using self‐assembled polymer micelles as reactive nanoreactors. Such core/shell nanoparticles were composed of optically active helical‐substituted polyacetylene as the core and thermosensitive poly(N‐isopropylacrylamide) as the shell. The synthetic procedure is divided into three major steps: (1) synthesis of amphiphilic diblock copolymer bearing polymerizable C[tbond]C bonds via atom transfer radical polymerization, followed by (2) self‐assembly of the diblock copolymer to form polymer micelles; and (3) catalytic emulsion polymerization of substituted acetylene monomer conducted using the polymer micelles as reactive nanoreactors leading to the core/shell nanoparticles. The core/shell nanoparticles simultaneously exhibited remarkable optical activity and thermosensitivity. The facile, versatile synthesis methodology opens new approach toward preparing novel multifunctional core/shell nanoparticles.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

RAFT‐mediated batch emulsion polymerization of styrene using poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] trithiocarbonate as both surfactant and macro‐RAFT agent

Poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] trithiocarbonate, which contains the reactive trithiocarbonate group and the appending surface‐active groups, is used as both surfactant and macromolecular reversible addition‐fragmentation chain transfer (macro‐RAFT) agent in batch emulsion polymerization of styrene. Under the conditions at high monomer content of ～20 wt % and with the molecular weight of the macro‐RAFT agent ranging from 4.0 to 15.0 kg/mol, well‐controlled batch emulsion RAFT polymerization initiated by the hydrophilic 2‐2′‐azobis(2‐methylpropionamidine) dihydrochloride is achieved. The polymerization leads to formation of nano‐sized colloids of the poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride]‐b‐ polystyrene‐b‐poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] triblock copolymer. The colloids generally have core‐shell structure, in which the hydrophilic block forms the shell and the hydrophobic block forms the core. The molecular weight of the triblock copolymer linearly increases with increase in the monomer conversion, and the values are well‐consistent with the theoretical ones. The molecular weight polydispersity index of the triblock copolymer is below 1.2 at most cases of polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Influence of the stirring speed and CaCl2 concentration on the nano‐object morphologies obtained via RAFT‐mediated aqueous emulsion polymerization in the presence of a water‐soluble macroRAFT agent

Aqueous emulsion polymerizations of styrene were performed in the presence of a macromolecular reversible addition‐fragmentation chain transfer (RAFT) agent (macroRAFT) composed of acrylic acid (AA) and poly(ethylene oxide) methyl ether acrylate (PEOA), end‐capped by a reactive dodecyl trithiocarbonate group (P(AA‐co‐PEOA)‐TTC). The influence of the stirring speed or the presence of different amounts of a divalent salt, CaCl₂, were investigated in this polymerization‐induced self‐assembly process, in which spherical and nonspherical nano‐objects were formed upon the synthesis of amphiphilic diblock copolymers in situ. It appeared that the addition of CaCl₂ led to the controlled formation of different nano‐objects such as spheres, fibers or vesicles, whereas an appropriate stirring speed was required for the formation of nanofibers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and Characterization of Dendrimer‐Encapsulated Bimetallic Core‐Shell PdPt Nanoparticles

Using a successive method, PAMAM dendrimer‐encapsulated bimetallic PdPt nanoparticles have been successfully prepared with core‐shell structures (Pd@Pt DENs). Evidenced by UV‐vis spectra, high resolution transmission electron microscopy, and X‐ray energy dispersive spectroscopy (EDS), the obtained Pd@Pt DENs are monodispersed and located inside the cavity of dendrimers, and they show a different structure from monometallic Pt or Pd and alloy PdPt DENs. The core‐shell structure of Pd@Pt DENs is further confirmed by infrared measurements with carbon monoxide (IR‐CO) probe. In order to prepare Pd@Pt DENs, a required Pd/Pt ratio of 1:2 is determined for the Pt shell to cover the Pd core completely. Finally, a mechanism for the formation of Pd@Pt DENs is proposed.     

Facile preparation of core‐crosslinked micelles from azide‐containing thermoresponsive double hydrophilic diblock copolymer via click chemistry

Double hydrophilic diblock copolymer, poly(N,N‐dimethylacrylamide)‐b‐poly(N‐isopropylacrylamide‐co‐3‐azidopropylacrylamide) (PDMA‐b‐P(NIPAM‐co‐AzPAM), containing azide moieties in one of the blocks was synthesized via consecutive reversible addition‐fragmentation chain transfer polymerization. The obtained diblock copolymer molecularly dissolves in aqueous solution at room temperature, and can further supramolecularly self‐assemble into core‐shell nanoparticles consisting of thermoresponsive P(NIPAM‐co‐AzPAM) cores and water‐soluble PDMA coronas above the lower critical solution temperature of P(NIPAM‐co‐AzPAM) block. As the micelle cores contain reactive azide residues, core crosslinking can be facilely achieved upon addition of difunctional propargyl ether via click chemistry. In an alternate approach in which the PDMA‐b‐P(NIPAM‐co‐AzPAM) diblock copolymer was dissolved in a common organic solvent (DMF), the core‐crosslinked (CCL) micelles can be fabricated via “click” crosslinking upon addition of propargyl ether and subsequent dialysis against water. CCL micelles prepared by the latter approach typically possess larger sizes and broader size distributions, compared with that obtained by the former one. In both cases, the obtained (CCL) micelles possess thermoresponsive cores, and the swelling/shrinking of which can be finely tuned with temperature, rendering them as excellent candidates as intelligent drug nanocarriers. Because of the high efficiency and quite mild conditions of click reactions, we expect that this strategy can be generalized for the structural fixation of other self‐assembled nanostructures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 860–871, 2008     

Synthesis and luminescence characteristics of conjugated dendrimers with 2,4,6‐triaryl‐1,3,5‐triazine periphery

We have synthesized conjugated dendrimer with triazine peripheries, and their luminescence properties were investigated. The dendrimers consist of dendritic triazine wedges for electron transport, distyrylbenzene core as an emitting moiety, and t‐butyl peripheral groups for good processing properties. The dendrimers have LUMO values of about ?2.7 eV possibly because of the triazine moiety with high electron affinity. Photoluminescence study indicates that energy transfer occurs from the triazine wedges to the stilbene bridge, and finally to the core chromophore units due to a cascade decrease of bandgap from the peripheral wedge to core moiety. Therefore, the emission wavelength was determined by the structure of the core unit. The energy transfer efficiency of distyrylbenzene‐cored dendrimers was about 75 and 55% for Trz‐1GD‐DSB and Trz‐2GD‐DSB, respectively. A preliminary electroluminescence property also was investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 254–263, 2006