电流源负载峰值电流控制buck变换器的复杂次谐波振荡现象

电流源负载峰值电流控制buck变换器具有次谐波振荡快慢复杂现象.本文建立了它的分段光滑开关模型及离散迭代映射模型.根据离散迭代映射模型,通过数值仿真研究了电路参数对buck变换器的非线性动力学行为的影响,发现了具有快慢效应次谐波振荡吸引域的分岔图和呈现双环带状的庞加莱映射.根据分段光滑开关模型,采用龙格-库塔算法,仿真研究了buck变换器的时域波形和相轨图,研究结果表明:电感电流存在由次谐波振荡与降频次谐波振荡组成的n型次谐波振荡现象;输出电压存在快标与慢标结合的正弦次谐波振荡现象.实验结果验证了文中的分 关键词： 开关DC-DC变换器 迭代映射 电流源负载 次谐波振荡     

多频率控制开关变换器的自相似和混频现象分析

在多频率控制开关变换器的工作原理及状态方程的基础上,建立了多频率控制断续导电模式开关变换器的离散迭代映射模型,并推导了相应的特征值方程和Lyapunov指数.根据离散迭代映射模型,对多频率控制开关变换器进行了分岔分析.结果表明:在电路参数变化时,变换器存在边界碰撞分岔行为和多周期行为;当误差界限电压较大时,变换器表现出自相似现象,而当误差界限电压较小时,变换器则表现出混频现象.采用Lyapunov指数研究了变换器的稳定性,验证了分岔分析的正确性.经过电路仿真,进一步分析了负载变化时变换器的时域波形和相轨图,并验证了离散迭代映射模型的有效性和理论分析的正确性.最后通过实验结果验证了文中的仿真结果.     

基于开关电感结构的混合升压变换器非线性现象研究

将开关电感结构嵌入到传统Boost变换器中可以显著提高Boost变换器的电压传输比, 同时减少开关器件的电流应力, 降低损耗, 提高效率, 具有广阔的应用前景. 本文首次研究了基于开关电感结构的混合升压变换器的分岔和混沌现象, 导出了连续电流模式下的离散迭代映射模型, 采用分岔图分析了电路参数对系统性能的影响, 发现此变换器不仅发生了倍周期分岔、边界碰撞分岔、切分岔和阵发混沌, 还存在一种特殊的现象: 随着电容C和电感L₂的减小, 电路的运行状态并非严格经历1倍周期、2倍周期和4倍周期, 而是在4倍周期期间发生了分岔轨迹相交的情况, 在相交的一点, 变换器工作于周期3. 最后通过典型的时域波形和相轨图验证了这种特殊现象的存在. 研究结果表明, 当电路参数变化时, 基于开关电感结构的混合升压变换器比传统低维Boost变换器具有更加复杂、多样化的非线性现象. 关键词： 开关电感 混合升压变换器 离散迭代映射 混沌     

脉冲序列控制电流断续模式Buck变换器的动力学建模与边界碰撞分岔

通过建立一个开关周期内输出电容电荷变化量对应的输出电压变化量, 建立了工作于电感电流断续模式(discontinuous conduction mode, DCM)的脉冲序列(pulse train, PT)控制Buck变换器的近似离散时间模型, 研究了负载电阻及输入电压变化时PT控制DCM Buck变换器的边界碰撞分岔行为. 通过构造相应的迭代映射曲线, 分别分析了不同负载电阻时PT控制DCM Buck变换器的周期1、周期2和周期3运行轨迹的不动点稳定性, 揭示了PT控制DCM Buck变换器在不同周期态时的边界碰撞分岔的形成机理. 研究结果表明, 随参数变化, PT控制DCM Buck变换器始终运行在不同的周期态, 各周期态的切换由边界碰撞分岔引起, 李雅谱诺夫指数始终小于零. 利用PSIM电路仿真软件, 给出了不同负载电阻时的时域波形和相轨图. 实验结果验证了理论分析和仿真结果的正确性, 同时说明了本文动力学建模的可行性.     

电感电流伪连续导电模式下Buck变换器的动力学建模与分析

以电感电流伪连续导电模式(pseudo-continuous conduction mode, PCCM)下Buck变换器为例, 通过对开关变换器的开关模态的完整描述, 建立了PCCM Buck变换器的精确离散时间模型. 基于该模型, 研究了PCCM Buck变换器在负载电阻、电感等效串联电阻、电感、电容、参考电流和输入电压等电路参数变化时的分岔行为, 并揭示了变换器存在的次谐波振荡、倍周期分岔和混沌等复杂动力学行为. 基于分段光滑开关模型的数值仿真, 得到变换器在不同负载电阻下的时域波形图和相轨图, 验证了离散时间模型的正确性. 理论分析和仿真结果表明: PCCM Buck变换器更适合工作在轻载条件, 加大负载会导致变换器工作状态的失稳以及工作模式的转移; 电感的等效串联电阻对变换器稳定性具有一定程度的影响, 且等效串联电阻越大, 变换器越稳定. 研究结果对于设计与控制PCCM Buck变换器具有重要意义.     

峰值/谷值电流型控制开关DC-DC变换器的对称动力学现象分析

峰值电流和谷值电流控制开关DC-DC变换器在较宽的电路参数范围内具有对称动力学现象.文中建立了峰值电流和谷值电流控制buck,boost,及buck-boost变换器的统一离散迭代映射模型,并导出了统一的分段光滑迭代映射方程及特征值方程,通过数值仿真得到了占空比变化时的正、逆分岔图和Lyapunov指数谱.研究结果表明,峰值/谷值电流型控制开关变换器的分岔图和Lyapunov指数具有关于点或轴对称的现象.时域仿真结果验证了数值仿真结果,并进一步表明,随着占空比的变化,峰值/谷值电流型控制开关变换器具有对称动力学现象、对称动力学现象和非对称动力学现象共存、非对称动力学现象.     

脉冲跨周期调制连续导电模式Buck变换器低频波动现象研究

揭示了脉冲跨周期调制(pulse skipped modulation,PSM)电感电流连续导电模式(continuous conduction mode,CCM)Buck变换器中存在的低频波动现象,分析了PSM调制CCM Buck变换器的能量转换过程,阐述了低频波动的产生机理,给出了低频波动的判断条件.建立了PSM调制CCM Buck变换器的同步开关映射模型,基于该模型给出了电感电流与输出电压随输出电容等效串联电阻(equivalent series resistance,ESR)变化的分岔图,分析了ESR对低频波动的影响.为消除PSM调制CCM Buck中存在的低频波动,提出了电容电流脉冲跨周期调制(capacitor current pulse skipped modulation,CC-PSM)方法.研究结果表明:在ESR较小时,CC-PSM调制CCM Buck变换器消除了PSM调制CCM Buck变换器存在的低频波动.仿真与实验结果验证了理论分析的正确性.     

峰值/谷值电流型控制开关DC-DC变换器的对称动力学现象分析

峰值电流和谷值电流控制开关DC-DC变换器在较宽的电路参数范围内具有对称动力学现象.文中建立了峰值电流和谷值电流控制buck,boost,及buck-boost变换器的统一离散迭代映射模型,并导出了统一的分段光滑迭代映射方程及特征值方程,通过数值仿真得到了占空比变化时的正、逆分岔图和Lyapunov指数谱.研究结果表明,峰值/谷值电流型控制开关变换器的分岔图和Lyapunov指数具有关于点或轴对称的现象.时域仿真结果验证了数值仿真结果,并进一步表明,随着占空比的变化,峰值/谷值电流型控制开关变换器具有对称动力学现象、对称动力学现象和非对称动力学现象共存、非对称动力学现象.     

V2控制Buck变换器等效建模与分岔分析

通过对V²控制Buck变换器电路进行降阶处理, 利用不同工作模式, 推导了两个边界电压, 建立了V²控制Buck变换器的等效一阶同步映射迭代模型, 研究了它的非线性分岔行为. 通过稳定性和工作模式分析, 推导了V²控制Buck变换器从稳定的周期1工作状态到次谐波振 荡状态转移以及从电感电流不连续导电模式 (DCM) 到连续导电模式 (CCM) 转移的条件. 研究结果表明, 当电路参数变化时, V²控制Buck 变换器发生了倍周期分岔和边界碰撞分岔, 不同的参数变化有着不同的分岔路由. 搭建了仿真和实验电路, 仿真和实验结果验证了等效迭代模型的有效性和理论分析的正确性. 关键词： 2控制')" href="#">V²控制 迭代模型 分岔 工作模式     

单相全桥DC-AC电压逆变电路数字控制中的振荡现象分析

考虑数字控制采样计算延迟,建立了单相全桥DC-AC电压型逆变电路在负载电压外环电感电流内环加给定电压前馈控制方法下的离散迭代模型.通过分析相应的Jacobian矩阵特征值轨迹,确定该数字控制逆变器失稳时分岔点类型为Hopf分岔.对离散迭代模型进行数学变换,得出了控制器边界的解析表达式以及系统发生分岔时振荡频率的解析表达式,从而揭示了系统发生振荡现象的内在物理机理.最后,通过Simulink仿真以及电路实验证明了理论分析的正确性和有效性. 关键词： 单相全桥 DC/AC电压逆变电路 数字控制 离散迭代模型     

Dynamical analysis and experimental verification of valley current controlled buck converter

The dynamical behaviours of valley current controlled buck converter are studied by establishing its corresponding discrete iterative map model in this paper. Time-domain waveforms and phase portraits of valley current controlled buck converter are obtained by Runge--Kutta algorithm through a piecewise smooth switching model. The research results indicate that the valley current controlled buck converter exhibits rich nonlinear phenomena, and it has routes to chaos through period-doubling bifurcation and border-collision bifurcation in a wide parameter range. Interesting inverse nonlinear behaviours compared with peak current controlled buck converter are observed in the valley current controlled buck converter. Analysis and simulation results are verified by experimental results.     

电压型双频率控制开关变换器的动力学建模与多周期行为分析

在断续导电模式下, 建立了电压型双频率控制开关变换器的动力学模型, 并推导了相应的特征值方程. 根据动力学模型, 采用分岔图研究了电路参数变化时变换器存在的边界碰撞分岔行为和周期2, 周期3,周期4等多周期行为, 结果表明: 变换器经历了周期1态、多周期态、周期1态的分岔路由; 周期态的转变均是由边界碰撞分岔引起的. 根据特征值方程, 采用Lyapunov指数研究了变换器的稳定性, 结果表明: 随着电路参数的变化, Lyapunov指数始终小于零, 变换器一直工作于稳定的周期态, 验证了电压型双频率控制开关变换器的周期3行为并不意味着变换器会必然发生混沌. 通过电路仿真, 分析了负载变化时变换器的时域波形、相轨图和频谱图, 验证了动力学模型的可行性和理论分析的正确性. 实验结果验证了文中的仿真结果. 关键词： 开关变换器 双频率控制 边界碰撞分岔 多周期行为     

Sampled-data modeling and dynamical effect of output-capacitor time-constant for valley voltage-mode controlled buck-boost converter

By analyzing the output voltage ripple of a buck-boost converter with large equivalent series resistance(ESR) of output capacitor, one valley voltage-mode controller for buck-boost converter is proposed. Considering the fact that the increasing and decreasing slopes of the inductor current are assumed to be constant during each switching cycle, an especial sampleddata model of valley voltage-mode controlled buck-boost converter is established. Based on this model, the dynamical effect of an output-capacitor time-constant on the valley voltage-mode controlled buck-boost converter is revealed and analyzed via the bifurcation diagrams, the movements of eigenvalues, the Lyapunov exponent spectra, the boundary equations,and the operating-state regions. It is found that with gradual reduction of output-capacitor time-constant, the buck-boost converter in continuous conduction mode(CCM) shows the evolutive dynamic behavior from period-1 to period-2, period-4, period-8, chaos, and invalid state. The stability boundary and the invalidated boundary are derived theoretically by stability analysis, where the stable state of valley voltage-mode controlled buck-boost converter can enter into an unstable state, and the converter can shift from the operation region to a forbidden region. These results verified by time-domain waveforms and phase portraits of both simulation and experiment indicate that the sampled-data model is correct and the time constant of the output capacitor is a critical factor for valley voltage-mode controlled buck-boost converter, which has a significant effect on the dynamics as well as control stability.     

Sampled-data modeling and dynamical effect of output-capacitor time-constant for valley voltage-mode controlled ewline buck-boost converter

By analyzing the output voltage ripple of a buck-boost converter with large equivalent series resistance (ESR) of output capacitor, one valley voltage-mode controller for buck-boost converter is proposed. Considering the fact that the increasing and decreasing slopes of the inductor current are assumed to be constant during each switching cycle, an especial sampled-data model of valley voltage-mode controlled buck-boost converter is established. Based on this model, the dynamical effect of an output-capacitor time-constant on the valley voltage-mode controlled buck-boost converter is revealed and analyzed via the bifurcation diagrams, the movements of eigenvalues, the Lyapunov exponent spectra, the boundary equations, and the operating-state regions. It is found that with gradual reduction of output-capacitor time-constant, the buck-boost converter in continuous conduction mode (CCM) shows the evolutive dynamic behavior from period-1 to period-2, period-4, period-8, chaos, and invalid state. The stability boundary and the invalidated boundary are derived theoretically by stability analysis, where the stable state of valley voltage-mode controlled buck-boost converter can enter into an unstable state, and the converter can shift from the operation region to a forbidden region. These results verified by time-domain waveforms and phase portraits of both simulation and experiment indicate that the sampled-data model is correct and the time constant of the output capacitor is a critical factor for valley voltage-mode controlled buck-boost converter, which has a significant effect on the dynamics as well as control stability.     

双降压式全桥逆变器非线性现象的研究

双降压式全桥逆变器具有无桥臂直通、输入直流电压利用率高、效率高、续流二极管可优化选取等优点,因而在高压输出场合得到广泛的应用.本文研究了双降压式全桥逆变器的分岔和混沌现象,建立了电流闭环比例控制下的二阶离散模型,得到了不同时间段内的频闪映射模型;通过折叠图和分岔图分析了不同比例系数k对于系统稳定性的影响,并搭建了Matlab/Simulink仿真模型,得到了电流闭环比例控制时电流iL的时域波形和相图轨迹,并在频域下分析了分岔和混沌对系统频谱的影响.同时,利用分岔图的方法分析了输入电压E、滤波电感L和开关周期T等外部参数变化时系统的非线性行为.研究结果表明,正确选择双降压式全桥逆变器的电路参数对于其稳定运行具有重要意义.     

Dynamics and stabilization of peak current-mode controlled buck converter with constant current load

The discrete iterative map model of peak current-mode controlled buck converter with constant current load(CCL),containing the output voltage feedback and ramp compensation, is established in this paper. Based on this model the complex dynamics of this converter is investigated by analyzing bifurcation diagrams and the Lyapunov exponent spectrum. The effects of ramp compensation and output voltage feedback on the stability of the converter are investigated. Experimental results verify the simulation and theoretical analysis. The stability boundary and chaos boundary are obtained under the theoretical conditions of period-doubling bifurcation and border collision. It is found that there are four operation regions in the peak current-mode controlled buck converter with CCL due to period-doubling bifurcation and border-collision bifurcation. Research results indicate that ramp compensation can extend the stable operation range and transfer the operating mode, and output voltage feedback can eventually eliminate the coexisting fast-slow scale instability.