Screening of dissolved heavy metals (Cu,Zn, Mn,Al, Cd,Ni, Pb) in seawater by a liquid-membrane–ICP–MS approach

A bulk liquid membrane system has been developed and applied to the simultaneous separation and preconcentration of up to seven heavy metals (copper, zinc, lead, cadmium, aluminium, manganese, and nickel) in seawater. Copper was selected to optimize transport conditions and then, under these conditions, the simultaneous extraction of other heavy metals was studied. The system achieved preconcentration yields ranging between 44.11% (Cd) and 77.77% (Cu) after nine hours of operation, the effectiveness of metal transport being Cu > Zn > Pb > Mn > Ni > Al > Cd. The system was applied to the preconcentration of four real seawater samples before their quantification by inductively coupled plasma–mass spectrometry (ICP–MS). Compared with the analytical procedures commonly used for trace metal determination in oceanography, the results obtained demonstrated that the new system may be used as a very clean (sample contamination-free), simple, and one-step alternative for semiquantitative, and even quantitative, simultaneous determination of heavy metals in seawater.     

Anodic Stripping Voltammetry of Heavy Metals at Nanocrystalline Boron‐Doped Diamond Electrode

Boron‐doped Diamond (BDD) electrode has become one of the important tools for heavy metal detection. By studying some analytical parameters of DPASV method, like deposition time and potential in different electrolyte concentrations (acetate buffer), the conditions for detecting very low metal ion levels (Zn, Cd, Pb, and Cu) could be chosen. Diluted electrolyte (0.01 M buffer) was one of the factors favoring low detection and quantification limits, but its quantification range is short in comparison to more concentrated media. For ?1.7 V deposition potential, the detection of single metal at ppb levels was reached in 60 s deposition time. Understanding different metal‐metal interactions shows the limits to the simultaneous determination of heavy metals at BDD. Quantification was possible for the simultaneous determination of Zn, Cd and Pb despite the overlapping of Zn and Cd peaks. The performance of the BDD was compared with that of another C‐based solid electrode: the glassy carbon electrode (without mercury plating). A lower base line current, wider potential range, higher sensitivity (3 to 5 times higher than GC) and longevity of the material were noticed for the BDD.     

氧化与还原条件下伊通河长春区段沉积物重金属形态特征的对比研究

利用改进的Tessier连续萃取法研究了伊通河长春市自由大桥处不同深度沉积物样品在氧化及还原条件下Cu,Pb,Zn和Ni的形态变化规律,同时分析了沉积物样品中酸可挥发性硫(Acid volatile sulfide,AVS)和同时提取重金属(Simultaneous extract metals,SEM)的含量. 实验结果表明，样品经干燥、研磨处理后,Cu有机/硫化物结合态比例减少40%,锰氧化物结合态的比例显著增加; Pb,Zn和Ni 3种元素有机/硫化物结合态比例均略有下降,变化幅度小于Cu,并重新分配到不同的化学相中. 通过SEM中各金属含量与有机/硫化物结合态中金属含量的对比可知,还原性沉积物中Cu除了与硫化物结合外,很大一部分是以有机物形态存在的,Pb,Zn,Ni,Fe和Mn则主要以硫化物形态存在,各元素形态分析均不同程度地受到萃取剂的影响.     

ICP-MS determination of heavy metals in submerged cultures of wood-rotting fungi

Accumulation of five heavy metal ions by five species of wood-rotting basidiomycetes during a 9-day cultivation was studied. Contents of Cd, Cu, Pb, and Zn were measured using ICP-MS; the amount of mercury was determined directly in solid samples using the Advanced Mercury Analyser. A standard operation procedure for the sample preparation and determination of metal content was developed and validated. Presence of Cd, Cu, Hg, and Pb decreased the accumulation of zinc by the fungi. The basidiomycete Pycnoporus cinnabarinus exhibited the highest metal binding capacity of all fungi tested.     

Study of the parameters affecting the binding of metals in solution by Chlorella vulgaris

The ability of Chlorella vulgaris to accumulate heavy metals in solution (Mn, Cr, Ni, Zn and Cu) was investigated. Various parameters (algal biomass, pH and contact time of the algae with the sample) have been studied. Nine mg of algal biomass, pH 8 and 15 min of contact time, with 1 ppm of each metal, were the optimized conditions. At pH 8, the optimum value to rise the maximum binding, a fraction of metals in solution precipitates forming hydroxides. Combining both processes, a chemical–biological system for the removing of metals at ppb levels from the environment is obtained. The simultaneous determination of these five metals was performed by capillary electrophoresis (CE) with a UV/Vis detector.     

Analysis of Atmospheric Aerosols by Atomic Emission Spectrometry with Electrical Discharge Sampling

A procedure has been developed for the determination of the concentration of heavy metals (Pb, Mn, Cu, Ni, Zn, and Cd) in atmospheric air by atomic emission spectrometry with gas-discharge sampling onto the end of a standard carbon electrode. A design of a two-section sampler is proposed; the sampler provides the rapid determination of deposition factors for heavy metals contained in aerosol particles deposited onto the end of a carbon electrode. Examples of determining metal concentrations in a model sample of air and in atmospheric air and determination limits of metals deposited onto the end of a carbon electrode are given.     

Assessment of heavy metals leachability from metallo-organic sorbent-iron humate-with the aid of sequential extraction test

The sequential extraction test, known as a BCR procedure, was used to assess a leachability of heavy metals (Zn, Cd, Pb, Cu) from the metallo-organic sorbent—iron humate—loaded with these metals. The sequential test allowed to discriminate between various fractions of heavy metals, namely the acid-extractable fraction, the fraction bound to Fe oxides, and the fraction bound to organic matter. It was proven that the heavy metals are bound mainly to Fe oxides and organic matter, and thus they may be relatively hardly liberated into the environment. The BCR sequential extraction test exhibited a very good repeatability, when it was applied to the loaded sorbent—relative standard deviations were typically lower than 10%.     

Total reflection X-ray fluorescence and energy-dispersive X-ray fluorescence analysis of runoff water and vegetation from abandoned mining of Pb–Zn ores

The present work reports on the heavy metal content: Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Cd and Pb in running waters and vegetation around abandoned mining areas. Two species of mosses (Dicranum sp. and Pleurocarpus sp.) and three different species of wild grass (Bromus sp., Rumex sp. and Pseudoavena sp.) growing on the surrounding areas of old lead–zinc mines (Aran Valley, Pyrenees, NE Spain) have been analyzed. Both water and vegetation were collected in two different sampling places: (a) near the mine gallery water outlets and (b) on the landfill close to the abandoned mineral concentration factories. For the heavy metal content determination, two different techniques were used: total reflection X-ray fluorescence for water analysis and energy-dispersive X-ray fluorescence for vegetation study. Surface waters around mine outlets exhibit anomalous content of Co, Ni, Zn, Cd. Stream waters running on mining landfills exhibit higher Cu, Zn, Cd and Pb than those of the waters at the mine gallery outlets. The results allow us to assess the extent of the environmental impact of the mining activities on the water quality. The intake of these elements by vegetation was related with the sampling place, reflecting the metal water content and the substrate chemistry. Accumulation of metals in mosses is higher than those exhibited in wild grasses. Furthermore, different levels of accumulation were found in different wild grass. Rumex sp. presented the lowest metal concentrations, while Pseudoavena sp. reported the highest metal content.     

Trace determination of Cd, Cu, Pb and Zn in annual growth rings by differential pulse anodic stripping voltammetry

Summary A new voltammetric procedure has been developed for the determination of toxic heavy metals in annual growth rings. The method is based on a wet digestion of minute quantities of wood material of 10–25 mg with an acid mixture of HNO₃ and HClO₄ in a quartz cup and the subsequent simultaneous determination of Cd, Pb, Cu and Zn by differential pulse anodic stripping voltammetry (DPASV) at the hanging mercury drop electrode (HMDE). The accuracy of the method has been proved by using electrothermal atomic absorption spectrometry as an independent procedure. The problems of the contamination by ubiquitous heavy metals during the wet digestion were investigated and their influence on the results was effectively diminished. Losses of the studied metals have not been observed. The high sensitivity of the method enables the determination of the toxic metals Pb and Cd in the analyte of the wet digestion with a relative standard deviation of less than 20% in the low level range 0.1–4 g/l.The potentialities of the method have been shown in the determination of Cd, Pb, Cu and Zn in cores of oak (Quercus petraea) from Königstein (Taunus, FRG). The high sensitivity made it possible to analyze individual growth rings and thus to avoid damages on trees using an excessive quantity of material. In two samples taken as example a distinct increase of the concentration of Cd and Pb during the last decade indicates metal pollution of the region by atmospheric precipitates.

---

Spurenbestimmung von Cd, Cu, Pb und Zn in Jahresringen mit Hilfe der Differentialpuls-ASV

---

Attached from the Institute of Chemistry, Universidad del Norte, Antofagasta, Chile. Taken in part from the Ph.D. Thesis, University in Bonn     

Distribution of heavy metals of agricultural soils of central Greece using the modified BCR sequential extraction method

The state of heavy metal (Cd, Cu, Ni, Zn, Pb, and Cr) pollution was studied, in 440 texturally different soil profiles in Thessaly, an intensely cultivated region in Central Greece. The study was carried out in 2004 and 2005 on 220 soil samples for each year. Soil samples were classified in three soil orders: Endisols, Alfisols, and Vertisols according to the Soil Taxonomy System. The pseudo-total concentrations of heavy metals were determined by the aqua regia procedure. Heavy metals were also determined after division into four fractions by sequential extraction with (a) acetic acid (exchangeable and specifically adsorbed metals), (b) a reducing agent (bound to Fe/Mn hydroxides), (c) an oxidizing agent (bound to soil organic matter), and (d) aqua regia (bound to mineral structures, residual). The concentrations of all the metals studied were higher in the topsoil (0–30?cm) and lower in the second soil layer (30–60?cm). Concentrations of 70–82% of Cd, 39–64% of Cu, 41–69% of Ni, 29–51% of Zn, 75–89% of Pb, and 52–87% of Cr were found in the first two fractions. Cd appeared to be the most mobile of the metals studied, while Cu and Zn were found in forms associated with soil organic matter. The chemical partitioning patterns of Pb and Cr indicated that these metals are largely associated with the Fe–Mn hydroxides, while Cr was also found in the residual fractions. Significant correlations between heavy metals fractions and soil physicochemical parameters were obtained and discussed.     

Element determination in medieval soil samples by total reflection X-ray fluorescence analysis

An aqua regia extraction procedure for heavy metals in soils optimised for total reflection X-ray fluorescence analysis is presented. The procedure is applied to 92 soil samples of medieval layers from the city area of Dortmund. Sixteen elements (P, S, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, Rb, Sr, Ag, Sn, and Pb) were used to characterise 17 sample sites. The results are projected onto the medieval urban structure of Dortmund. Two sites loaded with non-ferrous heavy metal could be detected and correlated with archaeological data. The efficiency and repeatability of the proposed extraction procedure is discussed.     

电感耦合等离子体质谱(ICP-MS)法测定谷类产品中8种重金属元素

为建立大批量谷类产品中重金属元素的快速检测方法,采用快速消解法,样品于聚丙烯刻度离心管中经硝酸消解,用电感耦合等离子体质谱仪同时检测Pb、Cd、Cr、Cu、Zn、Ni、As、Hg等8种重金属元素含量.研究了消解酸用量及消解时间对结果的影响,并优化了仪器工作参数.研究结果表明,样品在120℃消解1 h后直接定容测定,各元...     

生活垃圾流化床热处置中重金属迁移分布研究

在流化床实验装置上研究模拟生活垃圾热解、气化、焚烧等热处置过程中重金属Cd、Pb、Zn及Cu的迁移转化,分析氧化还原气氛及温度对重金属挥发特性的影响。结果表明,高温及还原性条件促进了Cd、Pb及Zn的挥发;而氧化性气氛有利于Cu的迁移。热力学平衡模拟结果表明,金属在氧化和还原气氛下的转化途径不同。在还原性气氛下,金属主要以元素态单质或硫化物的形式存在,其熔沸点高低决定了金属挥发程度。反之,CuCl_3等氯化物的生成促进了Cu在氧化性气氛下的挥发。金属基反应在氧化性气氛下得到加强,提高了Cd、Pb及Zn向气相产物转化的起始温度。进一步考察重金属在不同组分的分布及富集规律,大部分以气相形式挥发的重金属易在降温过程中冷凝并富集于飞灰。气流夹带亦是导致重金属迁移的重要原因,流化床的高气速特性对重金属分布有显著影响。     

某冶炼厂周边土壤重金属污染评价分析及源解析研究

有色金属矿产资源采选冶活动造成的土壤重金属污染已成为严重的环境问题。采用电感耦合等离子体质谱法和光谱法测定某冶炼厂周边不同区域内土壤中重金属Cu、Pb、Zn、As、Ni、Cr、Cd、Hg元素含量,采用Kriging空间插值方法对重金属空间分布特征进行分析,采用内梅罗指数法对其污染状况进行评价,采用多元统计分析对重金属元素的污染源进行分析。结果表明,研究区土壤采样点80%处于污染状态,且以重度污染为主,污染比较严重的区域受风向影响在冶炼厂的西部和南部方向,污染严重的重金属元素为Cu、Pb、Cd、Zn和As,土壤中各重金属元素的污染源除来自于冶炼厂外,Zn-Cd-PbCu-As、Ni-Cr、Hg分别还受到机动车辆排放、自然因素、燃煤及农药使用的影响。     

用植物叶片中重金属元素含量指示大气污染的研究

通过对潮州市区交通繁忙路段和对照区 (红山森林公园 )不同植物叶片重金属元素 (Pb、Cd、Cu、Zn)的含量研究 ,探讨了重金属含量与城市大气污染之间的关系。结果表明 ,植物叶片中的重金属元素富积量和大气中污染指数正相关。植物叶片的重金属元素富积量可较好和客观地指示市区大气的重金属污染状况。该研究为城市规划和环境保护提供了科学依据     

Investigation of heavy metals mobility in shrimp aquaculture sludge—Comparison of two sequential extraction procedures

Influence of heavy metals was investigated by conducting various tests on the samples collected from aquaculture shrimp in Selangor, Malaysia. The concentration of heavy metals in the sludge and potential of mobility based on its association forms was studied. Two sequential extraction methods (five stages Tessier method and three steps BCR method) were used to determine the binding forms of the metals.From the analysis, Ca, Fe and Mn were found to be highest concentrated metals compared to Zn, Cu, Cr, Cd and Pb in aquaculture shrimp sludge. From the sequential extraction, Cd, Mn and Pb were mostly found in exchangeable/carbonate form, showed its susceptibility to be leached easily. Also Cu and Zn were extracted predominantly in oxidizable form. All metal concentrations (except Cd, Zn and Cu) were extracted to be higher in residual fraction in this method. The results of BCR method are totally similar to the five stages Tessier method. By comparing the percent of recovery, the BCR method was better than Tessier method. Nevertheless for both methods the percent of their recoveries were acceptable. For Pseudototal metal digestion, although the concentration of Cd is less than other heavy metals, it is very harmful as a fertilizer because Cd is one of the heavy metals that might be in the leaf or fruit of plants. Also for investigation of Ca in the sludge, this element was measured and high amounts of that show sludge is useful for growing of plant. The results of direct digestion of heavy metals show that with the control of Cd in this sludge we can use this sludge as fertilizer in soils for agriculture but it is better if it is used for fruitless plants.     

连续萃取法研究海湾养殖区沉积物中重金属形态

以连续萃取法研究海湾养殖区沉积物中重金属(Cd, Cu, Pb, Zn)的形态,将重金属分离为酸溶态、还原态、有机质结合态、硫化物结合态和残渣态.分别采用基体匹配法和内标法消除高盐基体对电感耦合等离子体光谱法(ICP-OES)和质谱法(ICP-MS)分析结果的影响.对海洋沉积物标准物质分析结果表明,样品稀释后测定值与标准值一致.比较了本连续萃取法和BCR法对沉积物样品中重金属形态的提取结果,并考察了萃取剂的选择性.实验表明,本方法可用于有机质污染和富营养化环境沉积物中重金属形态分析,特别是有机质结合态和硫化物结合态的分析.     

A review of heavy metal contaminations in urban soils, urban road dusts and agricultural soils from China

This paper reviews quite a few heavy metal contamination related studies in several cities from China over the past 10 years. The concentrations, sources, contamination levels, sample collection and analytical tools of heavy metals in urban soils, urban road dusts and agricultural soils were widely compared and discussed in this study. The results indicate that nearly all the concentrations of Cr, Ni, Cu, Pb, Zn, As, Hg and Cd are higher than their background values of soil in China. Among the cities, the contamination levels of the heavy metals vary in a large range. The geoaccumulation index shows that the contamination of Cr, Ni, Cu, Pb, Zn and Cd is widespread in urban soils and urban road dusts of the cities. Generally, the contamination levels of Cu, Pb, Zn and Cd are higher than that of Ni and Cr. Agricultural soils are also significantly influenced by Cd, Hg and Pb derived from anthropogenic activities. The integrated pollution index (IPI) indicates that the urban soils and urban road dusts of the developed cities and the industrial cities have higher contamination levels of the heavy metals. The comparison of the IPIs of heavy metals in urban soils and urban road dusts of Shanghai, Hangzhou, Guangzhou and Hongkong reveals that the contamination levels of the metals in urban road dusts are higher than that in urban soils in the cities. Moreover, the main sources of the metals in urban soils, urban road dusts and agricultural soils are also different.     

Methode d'elution selective pour l'extraction des metaux lourds de l'eau de mer sur resine chelatante: A selective method of elution for the extraction of heavy metals from sea waters on a chelating resin

A selective method of elution for the extraction of heavy metals from sea waters on a chelating resin.The extraction of heavy metals in sea water with Chelex 100 prior to their determination by atomic absorption spectrometry (a.a.s.) with electrothermal atomization is discussed. Maximum retention of heavy metals is not obtained with the resin in the H⁺ form, because it is gradually transformed in contact with sea water by the fixation of alkali and alkaline-earth cations which are eluted simultaneously with the heavy metals and interfere during a.a.s. The separation of heavy metals is quantitative on Chelex 100 in the Ca²⁺ form; treatment with dilute acetic acid (1 + 99) eliminates the alkali and alkaline-earth metals fixed on the resin before elution or the heavy metals. Elution with 1 M nitric acid gives simultaneous and quantitative recovery of Cu, Pb, Ni, Zn, Cd and Co; intermediate elution with 0.01 M nitric acid isolates Zn, Cd and Co from Cu and Pb, which are subsequently eluted with 1 M nitric acid.     

Feasibility of the use of disposable optical tongue based on neural networks for heavy metal identification and determination

This study presents the development and characterization of a disposable optical tongue for the simultaneous identification and determination of the heavy metals Zn(II), Cu(II) and Ni(II). The immobilization of two chromogenic reagents, 1-(2-pyridylazo)-2-naphthol and Zincon, and their arrangement forms an array of membranes that work by complexation through a co-extraction equilibrium, producing distinct changes in color in the presence of heavy metals. The color is measured from the image of the tongue acquired by a scanner working in transmission mode using the H parameter (hue) of the HSV color space, which affords robust and precise measurements. The use of artificial neural networks (ANNs) in a two-stage approach based on color parameters, the H feature of the array, makes it possible to identify and determine the analytes. In the first stage, the metals present above a threshold of 10⁻⁷ M are identified with 96% success, regardless of the number of metals present, using the H feature of the two membranes. The second stage reuses the H features in combination with the results of the classification procedure to estimate the concentration of each analyte in the solution with acceptable error. Statistical tests were applied to validate the model over real data, showing a high correlation between the reference and predicted heavy metal ion concentration.