Glassy carbon and boron doped glassy carbon electrodes for voltammetric determination of linuron herbicide in the selected samples

In this study the application of home-made unmodified (GC) and bulk modified boron doped glassy carbon (GCB) electrodes for the voltammetric determination of the linuron was investigated. The electrodes were synthesized with a moderate temperature treatment (1000°C). Obtained results were compared with the electrochemical determination of the linuron using a commercial glassy carbon electrode (GC-Metrohm). The peak potential (E _p ) of linuron oxidation in 0.1 mol dm⁻³ H₂SO₄ as electrolyte was similar for all applied electrodes: 1.31, 1.34 and 1.28 V for GCB, GC and GC-Metrohm electrodes, respectively. Potential of linuron oxidation and current density depend on the pH of supporting electrolyte. Applying GCB and GC-Metrohm electrodes the most intensive electrochemical response for linuron was obtained in strongly acidic solution (0.1 mol dm⁻³ H₂SO₄). Applying the boron doped glassy carbon electrode the broadest linear range (0.005–0.1 μmol cm⁻³) for the linuron determination was obtained. The results of voltammetric determination of the linuron in spiked water samples showed good correlation between added and found amounts of linuron and also are in good agreement with the results obtained by HPLC-UV method. This appears to be the first application of a boron doped glassy carbon electrode for voltammetric determination of the environmental important compounds.      

Efficient and solvent-free synthesis of 1-amidoalkyl-2-naphthols using <Emphasis Type="Italic">N,N,N’,N’</Emphasis>-tetrabromobenzene-1,3-disulfonamide

N,N,N,’N’-Tetrabromobenzene-1,3-disulfonamide [TBBDA] is found to be a reusable catalyst for efficient synthesis of various amidoalkyl naphthols from β-naphthol, aromatic aldehydes and urea in good to high yields under solvent-free conditions.      

Polyaniline-polypyrrole coating for solid phase microextraction

A procedure for direct electrochemical deposition of polyaniline-polypyrrole blend coating on the surface of stainless steel wire was suggested. Incorporation of polyaniline and polypyrrole into the blend coating was confirmed by infrared spectroscopy. Key parameters (pyrrole, aniline, dopant and sulphuric acid concentrations and deposition potential) influencing the coating’s mechanical stability and surface homogeneity were optimised and thermostability of the coating was investigated. A possibility to apply the coating as a new fibre for solid phase microextraction was demonstrated. The coating showed better selectivity toward aromatic, hydrophobic compounds.      

A study of the antioxidative behavior of phenolic acids, in aqueous herb extracts, using a dsDNA biosensor

Electrochemical DNA biosensors are promising tools for the fast, inexpensive and simple in vitro analysis for the determination of free radicals and antioxidants. High concentrations of antioxidants in such compounds as phenolic acids and plant extracts, act as free radical terminators which reduce the effect of the oxidative dam-age on DNA. The electrochemical behavior of three representative phenolic acids, caffeic acid, gallic acid and trolox were studied by cyclic voltammetry. Moreover, the determination of the above antioxidants under the optimized conditions (scan rate, deposition potential and time) using differential pulse voltammetry was also investigated. In vitro studies focused on their antioxidative effect were performed by adsorptive transfer stripping voltammetry and dsDNA biosensor. Using Fenton’s system, with FeSO₄ and H₂O₂ was chosen as a strong oxidative system. This biosensor was applied as a screening antioxidant test in order to estimate the antioxidant capacity of aqueous herb extracts.      

Sub-millivolt amplitude potential oscillations observed in the noise of hydrogen evolution on Ag and Cu microelectrodes

A strange effect was observed while using the method of quasi-simultaneous determination of electrochemical voltage noise and impedance to obtain information on the kinetics of the hydrogen evolution reaction on Ag and Cu microelectrodes. Beyond a certain polarizing current density we found microvolt-amplitude potential oscillations on both electrodes with a frequency in the 5 Hz–5 kHz range. The oscillations were observed in every single experiment with Ag and Cu, while no oscillatory behavior was observed during the control experiments with the Pt microelectrode. The presence of the oscillations indicates that the mechanism of hydrogen evolution is more complex compared to the original assumption.      

Consequence of hydrogen atom abstraction from 5’-hydroxyl group of 2’-deoxyadenosine. Theoretical quantum mechanics study

Reactive oxygen species (ROS) may generate different nucleoside/nucleotide radicals in a cell environment. In this study, the possibility of cyclic-2’-deoxyadenosines formation by a rearrangement of their free radicals was investigated. It seems that for cyclic-nucleosides formation, adoption of an O4’-exo conformation by the sugar moiety is necessary. However, this is the energetically unfavoured form of the 2-deoxyribose ring. Moreover, the creation of a O5’, C8 bond in purine deoxy-nucleosides/nucleotides leads to the termination of the DNA elongation process.      

Voltammetric determination of Rutin at Screen-Printed carbon disposable electrodes

Rutin is a flavonoid commonly employed for many therapeutic purposes. Although the electroactive phenolic groups of rutin might be oxidized at low applied potential, the adsorption of oxidized species changes the electrode surface. As a consequence, the repeatability and reproducibility of the method decreases, which limits electroanalytical applications. This paper describes the use of disposable screen-printed electrodes as an alternative to improve the electrochemical quantification of rutin in commercial and standard samples. The electrochemical behavior was consistent to what is observed using other carbon electrodes: an adsorption-involved step and a pH-dependent oxidation process. The replacement of the electrodes between the analyses ensured rapid analysis, good intermediate precision and repeatability. The proposed method was successfully applied to rutin determination in pharmaceutical samples of capsules, with the limit of quantification being 0.30 μM.      

Voltammetric determination of dopamine in the presence of ascorbic and uric acids using partial least squares regression: determination of dopamine in human urine and plasma

A new differential pulse voltammetric method for dopamine determination at a bare glassy carbon electrode has been developed. Dopamine, ascorbic acid (AA) and uric acid (UA) usually coexist in physiological samples. Because AA and UA can be oxidized at potentials close to that of DA it is difficult to determine dopamine electrochemically, although resolution can be achieved using modified electrodes. Additionally, oxidized dopamine mediates AA oxidation and the electrode surface can be easily fouled by the AA oxidation product. In this work a chemometrics strategy, partial least squares (PLS) regression, has been applied to determine dopamine in the presence of AA and UA without electrode modification. The method is based on the electrooxidation of dopamine at a glassy carbon electrode in pH 7 phosphate buffer. The dopamine calibration curve was linear over the range of 1–313 μM and the limit of detection was 0.25 μM. The relative standard error (RSE %) was 5.28%. The method has been successfully applied to the measurement of dopamine in human plasma and urine.      

Unusual reaction of 3,4-bis(3-nitrofurazan-4-yl)furoxan with ammonia,primary amines and hydrazine

The nucleophilic displacement of two nitro groups in 3,4-bis(3-nitrofurazan-4-yl)furoxan with ammonia, primary aliphatic amines and hydrazine leads to formation of a novel heterocyclic system, 7H-tris[1,2,5]oxadiazolo[3,4-b:3′,4′-d:3″,4″-f]azepine. The reaction of compound 1 with secondary aliphatic amines proceeds in a typical way for nitrofurazans when the nitro-group in the starting compound is substituted by RR’N-group.      

Proposal for a mercury isolation procedure using cold vapor method in combination with voltammetric determination using a rotating gold electrode

The optimal process of pre-treatment and activation of gold rotating disc electrode (AuRDE) before voltammetric determination of mercury is proposed. This treatment encompasses polishing of the electrode surface, electrochemical cycling, and activation. This procedure both increases determination sensitivity as well as improves determination reproducibility. The detection limit on the working electrode achieved using this approach amounted to 8.26·10⁻¹⁰ mol L⁻¹for direct mercury determination in water solution (applying 200 s running accumulation). The procedure of the quantitative mercury isolation from complicated sample matrix was developed as well. It provides better selectivity and significant increase of sensitivity of mercury determination. In case of mercury isolation from one liter of water the detection limit is 6.23·10⁻¹¹ mol L⁻¹ (analyzing a greater sample volume the determined concentration could be lower).      

Electrode mechanism and voltammetric determination of selected guanidino compounds

The present review describes the recent results on the electrochemical activity of bio-guanidino compounds, such as famotidine, metformin, acyclovir, ganciclovir, zanamivir, moroxydine as well as guanidino compounds, such as S-[(2-guanidino-thiazol-4-yl)methyl]isothiourea hydrochloride, 2-guanidino-1,3-thiazole, 2-guanidinobenzimidazole. The focus is on analyzing the electrode mechanism of the guanidino compounds at the hanging mercury drop electrode and at the silver amalgam film electrode, as well as on the character of the square wave (SW) voltammetric signals. It has been stated, that the compounds can act as electrocatalysts — they are protonated and adsorbed at the surface of the electrode, after which the protonated forms of the compounds are irreversibly reduced, yielding their initial form and hydrogen. The experimental adsorption data obtained by measuring the differential capacity of the double layer, the zero charge potential, and the surface tension at the zero charge potential have established the adsorption processes underlying their electrochemical activity. The analytical application of the obtained voltammetric signals in the determination of these compounds in biological samples is also presented. This review concentrates on our own results in the context of general developments in the field.      

Some non-relativistic many electron theories: single reference case

There has been substantial progress in the development of electron correlation methods with some benefits and drawbacks. In this paper, we give a review of electron correlation effects on many body particles system. We focus more on atoms and molecules rather than solid state and take into account single reference case only. We mainly discuss perturbation theory, coupled electron many electron theory and a few versions of coupled electron pair approximations with comparison configuration interaction and some coupled cluster methods in which coupled cluster method is crucially important for the crystalline solids, the electron gas and the heat of the reaction. We also show some results, reported by several authors, to fairly compare and judge the methods’ feasibility mentioned above.      

ZrOCl<Subscript>2</Subscript> · 8H<Subscript>2</Subscript>O: An efficient catalyst for rapid one-pot synthesis of 3-carboxycoumarins under ultrasound irradiation in water

In this report, a rapid, efficient and environmental friendly synthesis of 3-carboxycoumarins under ultrasound irradiation in water media is described. The Knoevenagel condensation of Meldrum’s acid with substituted benzaldehydes in the presence of zirconium oxide chloride (ZrOCl₂·8H₂O) and ultrasonic irradiation in water gave the corresponding 3-carboxycoumarins in good to excellent yields.      

Meldola’s Blue — doped titania sol-gel sensor for NADH determination

Titania layers obtained by a sol-gel technique doped with redox mediator, Meldola’s Blue, were employed for construction of a new NADH senor. Optimization of preparation process as well as experimental conditions affecting the response of the sensor were examined. Under optimal conditions NADH could be determined in the wide linear range from 90 to 2300 μM with detection limit 12 μM and a high sensitivity 12.5 nA μM⁻¹. The usefulness of developed sensor was preliminarily checked in determination of NADH forming during enzymatic oxidation of ethanol catalyzed by alcohol dehydrogenase (ADH).      

The effect of manganese on the structural and surface properties of nanocrystalline cobalt catalyst for ammonia synthesis

Based on the active surface model of the iron catalyst for ammonia synthesis, the assumptions which led to obtaining the cobalt catalyst for ammonia synthesis were described. The incorporation into the system small amounts of manganese, an element which binds oxygen stronger than cobalt, has influence the development of the catalyst’s specific surface area. The activity of manganese modified catalysts is higher than that of cobalt catalyst without manganese addition. The obtained catalysts were characterized with the following methods: ICP-OES, XRD, BET      

Electrochemical oxidation of methylthiomethyleneisoquinolinium chloride — the first water soluble alkylthiomethylene substituted ammonium salt

Electrochemical oxidation of methylthiomethyleneisoquinolinium chloride (MTMIQ), the first alkylthiomethyl substituted ammonium salt, which is fully miscible with water has been investigated by voltammetric (SWV) method using glassy carbon electrode. On the electrode, MTMIQ undergoes oxidation at the potential near Ep = 0.07V (vs. Ag/AgCl/3 M KCl). The influence of the pH of buffers, amplitude, frequency, step potential on the received signal was studied. The best results were obtained with a citrate buffer at a pH of 5. The oxidation peak current used for MTMIQ voltammetric determination was in the range of 2–8×10⁻⁵ mol L⁻¹, LOD = 3.7×10⁻⁶, LOQ = 1.2×10⁻⁵. The product of the oxidation was accumulated at the working electrode and was investigated by spectroscopic method. Mechanistic pathways of the oxidation have been proposed.      

Properties of ibuprofen ion-selective electrodes based on the ion pair complex of tetraoctylammonium cation

Ibuprofen membrane electrodes based on different plasticizers: diisobutyl phthalate (DIBP), o-nitrophenyloctyl ether (o-NPOE), dioctyl sebacate (DOS) and tetraoctylammonium 2-(4-isobutylphenyl)propionate were prepared. All electrodes show: a near Nernstian slope of characteristic (58.3–60.9 mV decade⁻¹) in the measurement range (10⁻⁴–10⁻¹ mol L⁻¹), limit of detection (5.0×10⁻⁵ mol L⁻¹), really long lifetime (12 months), dependence of the electrode potential on pH (5.5–9.0), reproducibility of potential (0.6–1.2 mV) and selectivity coefficients in relation to some organic and inorganic anions. The electrodes were applied for the determination of ibuprofen in tablets by the calibration curve method and the standard addition method.      

Spectral study of coumarin-3-carboxylic acid interaction with human and bovine serum albumins

Fluorescence spectroscopy and circular dichroism (CD) spectroscopy were used to investigate the interaction of coumarin-3-carboxylic acid with human serum albumin (HSA) and bovine serum albumin (BSA) under physiological conditions in a buffer solution of pH 7.4.      

Method validation in quantitative electrochemical analysis of colchicine using glassy carbon electrode

A cathodic differential pulse voltammetric determination of colchicine was validated using a glassy carbon electrode in HClO₄/H₃PO₄ 0.01 M. Colchicine gives an irreversible, diffusion-controlled peak at −862 mV vs. Ag/AgCl reference electrode. The cathodic peak is strongly influenced by a more alkaline environment with a shift towards more negative potentials. Method optimization was carried out in parallel for three types of electrodes (glassy carbon, mercury film and bismuth film coated glassy carbon). The cathodic peak current is higher using film-coated electrodes, but shows poorer intra-day reproducibility and a longer analysis time due to film renewal. Thus, a bare glassy carbon electrode was used to determine colchicine in the concentration range of 2.4 − 50 μg mL⁻¹ (R ² = 0.9998, n = 5), with a calculated detection limit of 0.80 μg mL⁻¹. The proposed method was characterized according to ICH Harmonized Tripartite Guidance Q2(R1) by validation parameters (selectivity, linearity, accuracy, fidelity, limit of detection, limit of quantification) and it was successfully applied for the determination of colchicine from tablets, without the interference of the excipients. The method’s performances were evaluated and compared with both a known polarographic method and the official quantitative spectrophotometric determination from the Romanian Pharmacopoeia, Xth edition, respectively.