Synthesis and applications of poly(acryl<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonamideamidine-<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonylamide) chelating fiber for pre-concentrating and separating trace Bi(III), Hg(III), Au(III) and Pd(IV) from solution samples

Poly(acrylp-aminobenzenesulfonamideamidine-p-aminobenzenesulfonylamide) chelating fiber containing "S", "N", and "O" elements was synthesized from polyacrylonitrile fiber and p-aminobenzene sulfonamide and used to enrich and separate trace Bi(III), Hg(III), Au(III), and Pd(IV) ions from wastewater and ore sample solution. The enrichment acidity, flow rate, elution conditions, reuse, interference ions, saturated adsorption capacity, constant of adsorption rate, analytical accuracy, and actual samples on chelating fiber were investigated by means of inductively coupled plasma optical emission spectrometry (ICP-OES) with satisfactory results. Solutions of 100 ng mL^–1 of Bi(III), Hg(III), Au(III), and Pd(IV) ions can be enriched quantitatively by this chelating fiber at a rate of 1.0 mL min^–1 at pH 4 and desorbed quantitatively with 20 mL of 0.25 M HCl and 2% CS(NH₂)₂ solution at 50 °C (with recovery 97%). When the chelating fiber was reused for 20 times, the recoveries of the analyzed ions enriched by the fiber were still over 95% (except for Hg(III)). One thousand-fold excesses of Mn²⁺, Ca²⁺, Zn²⁺, Mg²⁺, Fe³⁺, Cu²⁺, Ni²⁺, Al³⁺, and Ba²⁺ ions and thousands-fold excesses of Na⁺ and K⁺ cause little interference in the pre-concentration and determination of the analyzed ions. The saturated adsorption capacity of Bi(III), Hg(III), Au(III), and Pd(IV) was 4.850×10^–4, 3.235×10^–4, 2.807×10^–4, and 3.386×10^–4 mol g^–1, respectively. The constants of adsorption rate were 0.409 min^–1 for Bi, 0.122 min^–1 for Hg, 0.039 min^–1 for Au, and 0.080 min^–1 for Pd. The relative standard deviations (RSDs) for the enrichment and determination of 10 ng mL^–1 Bi(III), Hg(III), Au(III), and Pd(IV) were lower than 2.3%. The results obtained for these ions in actual samples by this method were basically in agreement with the given values with average errors of less than 1.0%. FT-IR spectra shows that the existence of –SO₂–Ar, –H₂N–Ar, O=C–NH–, HN=C–NH–, and –HN–SO₂ functional groups are verified in the chelating fiber. From the FT-IR spectroscopy, we can see that Hg(III), Au(III), and Pd(IV) are mainly combined with nitrogen and sulfur (or oxygen), and Bi(III) is mainly combined with nitrogen (or oxygen) of the groups to form a chelating complex.     

Liquid — Liquid extraction of silver(I) by diphenyl-2-pyridylmethane in benzene from aqueous mineral acid — Thiocyanate solutions

Liquid — liquid extraction of Ag(I) by diphenyl-2-pyridylmethane (DPPM) in benzene from aqueous nitric and sulfuric acid solutions containing thiocyanate ions has been studied at ambient temperature (24±2 °C). The metal is extracted quantitatively from 0.01M HNO₃+0.02M KSCN; or 0.25M H₂SO₄+0.02M KSCN by 0.1M DPPM (optimum extraction conditions). Slope analysis indicates that two types of ion-pair complexes i.e. [(DPPMH)⁺·Ag(SCN) ₂ ^– ] and [(DPPMH) ₂ ⁺ ·Ag(SCN) ₃ ^2– ] are involved in the extraction process. Separation factors determined at optimum conditions reveal the separation of Ag(I) from Cs(I), Br(I), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Fe(III), Au(III) (from HNO₃ solution only), Cr(III), Hf(IV), Ta(V), Sn(IV) and Cr(VI). With the exception of thiosulfate, other complexing anions like ascorbate, acetate, citrate, oxalate do not hinder the extraction of Ag(I) under optimum conditions.     

Specific retention behaviour of metal (III) tetraphenylporphyrins in non-aqueous,reversed high-performance liquid chromatography

Summary The Co(II), Ni(II), Fe(III) and V(IV) complexes of tetraphenylporphine (TPP) can be eluted at short retention times from a LiChrosorb RP-18 column with pure ethanol. However, both Mn(III) and Co(III) complexes of metal TPP chloride type are so strongly retained on the column that they cannot be eluted. While the retention of other metal teraphenylporphine complexes was not affected, that of the metal(III) complexes of the TPP chloride type especially MnTPPCl and CoTPPCl, decreases dramatically with an increase in the concentration of NH₄Cl added into the mobile phase; a linear relationship between logk' and log[NH₄Cl], with the slope of about–1, has been observed for these two metal(III) complexes in the NH₄Cl concentration range from 2.5×10^–4 to 1.3×10^–2 mol/l. Thus, the specific control of the retention of the metal(III) complexes is enabled by conditioning the NH₄Cl content of the mobile phase, and the chromatographic separation is demonstrated.     

Extraction of thorium from aqueous nitric acid solution by bis-2-(butoxyethyl ether) (DBC)

The solvent extraction of thorium(IV) (4.3·10^–4M) from nitric acid solution by bis-2-(butoxyethyl ether) (butex or DBC) has been studied. It has been investigated as a function of nitric acid, extractant and metal ion concentration. The effect of equilibration time, diverse ions and salting-out agent on the extraction has also been examined. Among anions, fluoride, phosphate, oxalate and perchlorate have reduced the extraction. Cations such as Na(I), K(I), Ca(II), Zn(II), Al(III), Ti(IV), Zr(IV) except Sr(II) and Pb(II) do not interfere in the extraction. The extraction is enhanced upto 97% in three stages at 6M HNO₃ having 2.94M NaNO₃ as salting-out agent. The extraction is found to be independent of thorium concentration in the range studied (4.3·10^–4–4.3·10^–2M). The temperature (18–45°C) has an adverse effect on the extraction. A 1% solution of ammonium bifluoride is found to be a good stripping solution and recovery of thorium is >98%.     

Outer-sphere electron-transfer reactions with the participation of platinum(IV) haloammines

The kinetics of some outer-sphere electron-transfer reactions with the participation of the complexes [Pt(NH₃)_nX_6–n]² (n=6–0, X=Cl^–, Br^–) and dipyridyl complexes of Os(II), Ru(II), Ir(III), and Cr(II) have been investigated by means of luminescence-quenching measurements and flash photolysis. Estimates of the values of the Pt(IV)/Pt(III) one-electron potential and the change in the free energy of activation of electron self-exchange processes of the type Pt(IV) Pt(III) have been obtained on the basis of an analysis of the dependence of the rate constant on the change in the free energy accompanying the electrontransfer process.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 26, No. 4, pp. 455–462, July–August, 1990.     

A study of the tautomerism of the N-butyl-4(2)-methoxycarbonyl-pyrrolid-3-ones and their hydrochlorides

The tautomerism of N-butyl-2-methoxycarbonyl-4-methylpyrrolid-3-one (I), N-butyl-4-methoxycarbonylpyrrolid-3-one (II), N-butyl-4-methoxycarbonyl-2-methylpyrrolid-3-one (III), N-butyl-4-methoxycarbonylpyrrolid-3-one hydrochloride (IV), and N-butyl-4-methoxy-carbonyl-2-methylpyrrolid-3-one hydrochloride (V) has been studied by UV and IR spectroscopy. It has been found that the esters I–V are highly ionized in aqueous and ethanolic solutions at concentrations of 10^–2–10^–3 M. On passing from methyl cyclopentran-1-one-2-carboxylate to the esters II and III the position of the equilibrium in heptane and CCl₄ shifts in the direction of the keto form. On passing from the esters II and III to the esters IV and V, the position of the equilibrium shifts in the direction of the enol. Meyer's relationship is not satisfied for the esters II and III, while it is satisfied for the esters IV and V. Hypotheses have been put forward on the causes of the phenomena mentioned.     

Potentiometric titration of gold, platinum, and some other precious metals with cetylpyridinium chloride

Summary The precipitation titration of some precious metal halides vs. cetylpyridinium chloride was investigated, with emphasis on tetrachloroaurate and hexachloroplatinate. The optimum pH for titration of the latter anions was from 0.5 to 1.0. Differentiation of AuCl ₄ ^– and PtCl ₆ ^2– with this titrant is not feasible; their sum can, however, be determined. Titration vs. tetraphenylarsonium chloride at the same pH is successful only for AuCl ₄ ^– which can, thus, be determined in the presence of PtCl ₆ ^2– . Tetrachlororuthenate(IV), hexachlororhodate(III) and hexachloroiridate(III) did not yield analytically useful titration curves. Hexachloroosmate(IV), tetrachloropalladate(II), hexachloropalladate(IV), hexachloroiridate(IV) and tetrachloroplatinite(II) gave good titration curves.

---

Potentiometrische Titration von Gold, Platin und einigen anderen Edelmetallen mit Cetylpyridiniumchlorid

Zusammenfassung Die Fällungstitration einiger Edelmetallhalogenide mit Cetylpyridiniumchlorid wurde untersucht, wobei besonders Tetrachloraurat und Hexachlorplatinat von Interesse waren. Der optimale pH-Wert für die Titration war 0,5–1,0. Eine Unterscheidung zwischen AuCl ₄ ^– und PtCl ₆ ^2– war nicht möglich, jedoch kann deren Summe erfaßt werden. Die Titration mit Tetraphenylarsoniumchlorid bei demselben pH-Wert ist nur für AuCl ₄ ^– anwendbar; eine Bestimmung neben PtCl ₆ ^2– ist dadurch möglich. Für Tetrachlorruthenat(IV), Hexachlorrhodat(III) und Hexachloriridat(III) wurden keine analytisch brauchbaren Titrationskurven erhalten. Hexachlorosmat(IV), Tetrachlorpalladat(II), Hexachlorpalladat(IV), Hexachloriridat(IV) und Tetrachlorplatinit(II) ergaben jedoch gute Titrationskurven.

     

Indirect atomic absorption and atomic emission spectrometric determination of antazoline,hydralazine and amiloride hydrochlorides and quinine sulphate

Ion-association complexes of antazoline HCl [I], hydralazine HCl [II], amiloride HCl [III] and quinine sulphate [IV] with [Co(SCN)₄]^2– and [Co(NO₂)₆]^3– were precipitated and the excess unreacted cobalt complex was determined. A new method using atomic emission and atomic absorption spectrometry for the determination of the above drugs in pure solutions and pharmaceutical preparations is given. The drugs can be determined in the ranges 0.3–3.0, 0.19–1.96, 0.3–3.0, and 0.78–7.82 mg/25 ml solutions of I, II, III, and IV, respectively, with mean relative standard deviations of 0.65–2.03 % and recovery values of 95.76–101.2% indicating high precision and accuracy.     

Synthesis and efficiency of poly(acrylamidrazonehydrazide) chelating fiber for preconcentrating and separating trace gold and palladium from solution

A new poly(acrylamidrazone-hydrazide) chelating fiber has been synthesized using polyacrylonitrile fiber as a starting material. An ICP-OES method for applying the fiber to preconcentrate and separate trace Au(III) and Pd(IV) ions in solution has been established. The experiments show that 8 ng/ml Au(III) and 6 ng/ml Pd(IV) in 1000 ml of solution can be enriched quantitatively by the fiber column at a flow rate of 12 ml/min at pH 2. These ions can be desorbed quantitatively with 10 ml of 2.5% CS(NH₂)₂ + 6% H₂SO₄ containing 0.2% Fe(II) from the column at an elution rate of 6 ml/min. A fiber treated with 12M HCl or 15M HNO₃ can be re-used 10 times with above 95% recoveries of Au(III) and Pd(IV), and 120–800-fold excesses of Cu(II), Mn(II), Fe(III), Al(III), Ni(II), Mg(II) and Ca(II) ions cause little interference. The RSDs are 2.0% for 8 ng/ml Au and 3.5% for 6 ng/ml Pd. The recovery of added standard in a solution sample from a metal smelter is 96.2% for Au and 100% for Pd, and the content of each ion in the sample determined by the method is in agreement with the analysed value from the smelter laboratory.     

Indirekte Quecksilberbestimmung mit dem Nickelsalz der Antipyrin-4-Dithiocarbonsäure

Zusammenfassung Eine indirekte, extraktionsphotometrische Methode zur Bestimmung kleiner Quecksilbermengen wurde angegeben. Sie beruht auf der Verdrängung des Nickels aus farbigen, chloroformischen Lösungen von antipyrin-4-dithiocarbonsaurem Nickel. Die Herabsetzung der Lichtabsorption solcher Lösungen bei 575 nm ist der jeweiligen Quecksilbermenge proportional. Gold, Silber, Kupfer, Quecksilber(I), Cyanid und ÄDTA verhindern die Bestimmung. Der Einfluß sonstiger Fremdionen wurde untersucht.

---

Summary An indirect extraction-photometric method of determining small quantities of mercury has been worked out; it is based on the displacement of nickel from (4-DTA)₂Ni. A fall of the absorption of the color of this solution after extraction with the test specimen is measured at=575 nm. The determination is not possible in the presence of Au(III), Ag(I), Cu(I), Cu(II), Hg(I) and S₂O₃ ^2–, SO₃ ^2–, CN_– ions and Complexon III. Therefore a study was made of the influence of Tl(I), Pb(II), Cd(II), Ni(II), Co(II), Cr(III), Mn(II), Fe(II), Fe(III), Zn(II), Bi(III), Al(III), as well as of C₂O₄ ^2–, C₄H₄O₆ ^2–, Cl^–, I^–, SCN^–, SO₄ ^2–.

---

Résumé On a mis au point un dosage photométrique indirect, par extraction, de petites quantités de mercure; il repose sur le déplacement du nickel du composé (4-DTA)₂Ni. On mesure la diminution de l'absorption de la coloration de cette solution après l'extraction par l'échantillon étudié à = 575 nm. La présence des ions Au-III, Ag-I, Cu-I, Cu-II, Hg-I et S₂O₃ ^2–, SO₃ ^2–, CN^–, complexone-III rend le dosage impossible. On a étudié également l'influence de Tl-I, Pb-II, Cd-II, Ni-II, Co-II, Cr-III, Mn-II, Fe-II, Fe-III, Zn-II, Bi-III, Al-III, ainsi que de C₂O₄ ^2–, C₄H₄O₆ ^2–, Cl^–, I^–, SCN^–, SO₄ ^2–.

     

A selective and sensitive spot-test for gold

Summary A new spot test for gold has been developed, based on the oxidation of colourless phenolphthalin to red phenolphthalein in alkaline medium. The sensitivity is 0.2g of gold on a spot-plate and 0.15g on filter paper. Ce(IV) interferes seriously, and Pt(IV) at high concentrations, but Pd(II), Cu(II), Fe(III), Cr(III), Ni(II), UO₂(II), ClO₄ ^–, CrO₄ ^2–, BrO₃ ^–, IO₃ ^–, MoO₄ ^2–, and WO₄ ^2– do not.

---

Zusammenfassung Eine neue Tüpfelreaktion für Gold wurde entwickelt, die auf der Oxydation des farblosen Phenolphthalins zu rotem Phenolphthalein in alkalischem Milieu beruht. Die Empfindlichkeit beträgt auf der Tüpfelplatte 0,2g Gold, auf Filterpapier 0,15g. Cer(IV) stört stark, Pt(IV) in hoher Konzentration; hingegen stören Pd(II), Cu(II), Fe(III), Cr(III), Ni(II), UO₂(II), ClO₄ ^–, CrO₄ ^2–, BrO₃ ^–, JO₃ ^–, MoO₄ ^2– und WO₄ ^2– nicht.

     

Solvent extraction of thorium from nitric acid solutions using di-N-butyl sulfoxide (DBSO) in xylene

The extraction of thorium(IV) from nitric acid solutions by di-n-butyl sulfoxide (DBSO) in xylene has been investigated as a function of acid, extractant and the metal concentration. The effect of contact time and diverse ions on the extraction has been examined. Phosphate, fluoride, oxalate and perchlorate reduce the extraction to some extent. The extraction of other metal ions, especially impurities associated with thorium in ores, has been measured under optimised conditions selected for thorium extraction. Na(I), K(I), Ca(II), Sr(II), Mn(II), Fe(II), Ni(II), Zn(II), Pb(II), Al(III), Ti(IV) and Hf(IV) are not extracted. Among the stripping solutions employed for back-extraction, deionized water is found to be the best and more than 99% thorium can be back-extracted in three stages. The extracted species is supposed to be Th(NO₃)₄·2DBSO. The extraction is found to be almost independent of the thorium concentration in the range between 4.3·10^–4–4.3·10^–2M and inversely dependent upon the temperature. The values of thermodynamic functions H, G and S for extraction equilibrium have been evaluated to be –19.6±2.9 kJ·mole^–1, –18.1±2.0 kJ·mole^–1 and –5.0±2.9 J·mole^–1·K^–1, respectively.     

Distribution studies of metal ions on arsenophosphates of Sn(IV) and Cr(III) and on amine Sn(II) hexacyanoferrates (II) using radio tracers: Separation of Sr2+−Cs+, Hg2+−Ag+ and Hg2+−Zn2+

Summary Distribution studies of some metal ions have been made on Sn(IV) and Cr(III) arsenophosphates and on some samples of Sn(II) amine hexacyanoferrates(II), using radiotracers. The K_d values of Cs⁺ and Rb⁺ have been followed at varying HNO₃ concentrations also. As a result 3 useful binary separations have been achieved on Sn(IV) and Cr(III) arsenophosphates, such as Sr²⁺–Cs⁺, Hg²⁺–Ag⁺ and Hg²⁺–Zn²⁺.     

Cation exchange column chromatography in aqueous ammonium acetate: Separation of U(VI), Al(III), Sr(II), Ba(II) and Hg(II) from other metal ions

Summary A rigorous analysis of the effect of various concentrations (0.02–1.60M) of ammonium acetate on the distribution coefficients (K) of a number of metal ions using cation exchanger Dowex 50W-X8 (100–200 mesh NH₄ ⁺-form) has been made. On account of the low affinity of U(VI) for resin in 0.20M NH₄OAc it can be separated from all other metal ions. HighK values of Sr(II), Ba(II) and Hg(II) at higher 0.50M NH₄OAc are responsible for their separation from others. The abnormal column Chromatographic behaviour of Al(III) permits its separation from other metal ions including U(VI), Sr(II), Ba(II), Hg(II). A number of binary and ternary separations have been achieved.     

Reversed-phase partition chromatographic separation of minor actinides with bis(2-ethylhexyl) sulfoxide from acidic nitrate PUREX waste solutions

The uptake behavior of U(VI), Pu(IV), Am(III) and a few long-lived fission products from nitric acid media by bis(2-ethylhexyl) sulfoxide (BESO) adsorbed on Chromosorb has been studied U(VI), Pu(IV) and Zr(IV) are taken up appreciably as compared to trivalent actinides/lanthanides including some coexisting fission product contaminants which are weakly sorbed on the column. Chromosorb could be loaded with (1.12±0.03) g of BESO per g of the support. Maximum sorption is observed around 4–5 mol·dm^–3 HNO₃ for both U(VI) and Pu(IV), which are sorbed as their disolvates. The elution of (U(VI) and Pu(IV) from the metal loaded sorbent has also been optimized. Desorption of U(VI) is easily accomplished with dilute nitric acid (ca. 0.01 mol·dm^–3)while Pu(IV) is reductively stripped with 0.1 mol·dm^–3 NH₂OH·HCl. Effective sequential separation of U(VI), Pu(IV) and Am(III) from their several admixtures could be readily achieved from real medium and low level active acidic process raffinates.     

Simultaneous determination of uranium(IV) and iron(II) with a stopped-flow inductive kinetic spectrophotometric method

A kinetic method for simultaneous determination of multielements is proposed, and a procedure for simultaneous determination of uranium(VI) and iron(II) is established based on their inductive effect on the chromium(VI)-iodide redox reaction in weak acidic medium. The reaction was monitored with the stopped-flow spectrophotometric technique by using I ₃ ^– -starch complex as indicator. The calibration graphs are linear for 0–3.6 g.cm^–3 U(IV), and 0–2.5 g.cm^–3 Fe(II), respectively. Most foreign ions, except for V(IV), Sb(III), do not interfere with the determination.     

Properties and applications of polyacrylacylisothiourea chelating fiber for preconcentration and separation of trace titanium, vanadium and bismuth

An ICP-OES method using a new poly-acrylacylisothiourea chelating fiber to preconcentrate and separate trace Ti(IV), V(V) and Bi(III) ions from solution samples is established. The results show that 5–25 ng/ml of Ti or V and 50–250 ng/ml of Bi ions in 200–1000 ml of solution can be enriched quantitatively by 0.05 g of the fiber at pH 3 with recoveries over 97%. These ions can be desorbed quantitatively with 10 ml of 4M HC1O₄. 100- to 1000-fold excesses of Fe(III), Al(III), Ca(II), Mg(II), Cu(II), Ni(II) and Mn(II) ions cause little interference. The chelating fiber stored for about 2 years can still be used repeatedly for preconcentration and separation of trace Ti, V and Bi ions from solution with above 95% recovery. The RSDs for enrichment and determination of 5 ng/ml of Ti or V and 50 ng/ml of Bi are in the range 2.5–2.8%. The recoveries of added standard in real waste waters and mineral samples are between 96 and 100%, and the concentration found for each ion in the mineral sample was in good agreement with that measured by ETAAS.     

A potentiometric study of the oxidation of cobalt(II) with gold(III) chloride in presence of 1,10 phenanthroline or 2,2'-bipyridine : A new titration of cobalt (II) and its application to nickel-base alloys

The redox reaction between cobalt(II) and gold(III) chloride in the presence of 1.10-phenanthroline or 2,2'-bipyridine was studied, and a titration of the cobalt(II) complex with a gold(III) chloride solution was developed. A 4-fold amount of 1,10-phenanthroline or 2,2'-bipyridine was necessary for rapid quantitative reaction; the permissible pH range was 1.5–5. The oxidation of the cobalt(II) complex proceeds rapidly at 40–50°C, and a direct potentiometric titration was possible. The following maximum errors were obtained: 3.3% for 0.2–1.0 mg Co, 2.0% for 1–5 mg Co, and 0.70% for 10–40 mg Co. The following ions did not interfere: Ni(II), Zn(II), Pb(II), Cd(II), Mn(II), Fe(II), Cr(III), Al(III), Th(IV), Se(IV), Ti(IV), U(VI), Mo(VI), SO^2-₄ and PO^3-₄. Even small quantities of silver(I), copper(II), palladium(II), mercury(II)and iron(III) interfered. The method was applied to the determination of high cobalt contents in high-temperature nickel-base alloys.     

Adsorptive stripping voltammetric measurements of trace amounts of platinum(II) and ruthenium(III) in the presence of 1-(2-pyridylazo)-2-naphthol

An extremely sensitive stripping voltammetric procedure for low level measurements of platinum (II, IV) or ruthenium (III, IV) is reported. The method is based on the interfacial accumulation of the platinum (II) or ruthenium (III)-1-(2-pyridylazo)-2-naphthol complex on the surface of a hanging mercury drop electrode, followed by the reduction of the adsorbed complex during the cathodic scan. The peak potential was found to be –0.8 V vs. Ag/AgCl electrode and the reduction current of the adsorbed complex ions of platinum (II) or ruthenium (III) was measured by differential pulse cathodic stripping voltammetry. The optimum experimental conditions were: 1.5×10^–7 mol/l of 1-(2-pyridylazo)-2-naphthol solution of pH 9.3, preconcentration potential of –0.2 V, accumulation time of 3 min and pulse amplitude of 50 mV with 4 mV s^–1 scan rate in the presence of ethanol-water (30% v/v) — sodium sulphate (0.5 mol/l). Linear response up to 6.4 × 10^–8 and 5.1 × 10^–8 mol/l and a relative standard deviation (at 1.2×10^–8 mol/l) of 2.4 and 1.6% (n=5) for platinum (II) and ruthenium (III) respectively were obtained. The detection limits of platinum and ruthenium were 3.2×10^–10 and 4.1×10^–10 mol/l, respectively. The electronic spectra of the Pt(II) — PAN and Ru(III) — PAN complexes were measured at pH 9.3 and the stoichiometric ratios of the complexes formed were obtained by the molar ratio method. The effects of some interfering ions on the proposed procedure were critically investigated. The method was found suitable for the sub-microdetermination of ruthenium (IV) and platinum (IV) after their reduction to ruthenium (III) and platinum (II) with sulphur dioxide in acid media. The applicability of the method for the analysis of binary mixtures of ruthenium (III) and (IV) or platinum (II) and (IV) has also been carried out successfully. The method is simple, rapid, precise, and promising for the determination of the tested metal ions at micro-molar concentration level.