Flexible Waste Management to Increase the Effectiveness of Minor Actinide P&T Technology

Partitioning and transmutation (P&T) technologies have been developed for minor actinides (MA) to reduce the high level waste (HLW) volume and long-term radiotoxicity. Although the MA P&T can reduce the potential radiotoxicity effectively by 1-3 orders of magnitude, the actual operation of P&T requires several tens of years for developing elemental technologies of nuclide separation, MA containing fuel fabrication, transmutation and their practical systematization. The high level liquid waste (HLLW) containing MA is presently vitrified immediately after spent fuel reprocessing, stored about 50 years at surface facility and will be disposed of at deep geological repository. Vitrified HLW form works as an excellent artificial barrier against nuclides release during storage and disposal. On the other hand, it is difficult to recover MA from the form. So the present waste management scheme has an issue of MA P&T technology application until its deployment, which will produce much amount of vitrified HLW including long-lived MA without P&T application. Thus the authors proposed the flexible waste management method to increase the effectiveness of the MA P&T. The system adopts the HLLW calcination instead of the vitrification to produce granule for its dry storage of about 50 years until the MA P&T technology will be applicable. The granule should be easily dissolved by the nitric acid solution to apply the typical aqueous MA partitioning technologies to be developed. This paper reports the purpose of the study, the feasibility evaluation results for the calcined granule storage and the evaluation results for the environmental burden reduction effect.     

废弃SCR催化剂的循环再利用及表征分析研究

针对废弃SCR脱硝催化剂常规再利用处理后存在SO_2氧化率高的问题,提出了一种新型的废弃催化剂再利用新工艺,包括酸洗、还原酸浸和活性组分负载等步骤,以有效控制再利用催化剂的SO_2氧化率。实验考察了经不同步骤处理后所得催化剂的组分、脱硝效率和SO_2氧化率的变化情况,并对催化剂进行了深入的分析表征。结果表明,新鲜催化剂、废弃催化剂、常规再利用催化剂、新型再利用催化剂的脱硝效率和SO_2氧化率分别为99.0%和0.43%、77.0%和0.46%、94.2%和0.80%、99.3%和0.48%,采用本方法获得的再利用催化剂不仅脱硝效率完全恢复,而且SO_2氧化率得到了很好的控制。通过对催化剂的分析表征发现,采用常规再利用技术不能有效清除废弃催化剂表面的高聚态钒物种,而本方法则可以有效清理这类高聚态钒物种,并以高度分散的钒物种进行替代,从而有效控制再利用催化剂的SO_2氧化率。     

Advances and approaches for chemical recycling of plastic waste

The global production and consumption of plastics has increased at an alarming rate over the last few decades. The accumulation of pervasive and persistent waste plastic has concomitantly increased in landfills and the environment. The societal, ecological, and economic problems of plastic waste/pollution demand immediate and decisive action. In 2015, only 9% of plastic waste was successfully recycled in the United States. The major current recycling processes focus on the mechanical recycling of plastic waste; however, even this process is limited by the sorting/pretreatment of plastic waste and degradation of plastics during the process. An alternative to mechanical processes is chemical recycling of plastic waste. Efficient chemical recycling would allow for the production of feedstocks for various uses including fuels and chemical feedstocks to replace petrochemicals. This review focuses on the most recent advances for the chemical recycling of three major polymers found in plastic waste: PET, PE, and PP. Commercial processes for recycling hydrolysable polymers like polyesters or polyamides, polyolefins, or mixed waste streams are also discussed.     

Beyond Mechanical Recycling: Giving New Life to Plastic Waste

Increasing the stream of recycled plastic necessitates an approach beyond the traditional recycling via melting and re‐extrusion. Various chemical recycling processes have great potential to enhance recycling rates. In this Review, a summary of the various chemical recycling routes and assessment via life‐cycle analysis is complemented by an extensive list of processes developed by companies active in chemical recycling. We show that each of the currently available processes is applicable for specific plastic waste streams. Thus, only a combination of different technologies can address the plastic waste problem. Research should focus on more realistic, more contaminated and mixed waste streams, while collection and sorting infrastructure will need to be improved, that is, by stricter regulation. This Review aims to inspire both science and innovation for the production of higher value and quality products from plastic recycling suitable for reuse or valorization to create the necessary economic and environmental push for a circular economy.     

Recycling of waste from polymer materials: An overview of the recent works

Polymer recycling is a way to reduce environmental problems caused by polymeric waste accumulation generated from day-to-day applications of polymer materials such packaging and construction. The recycling of polymeric waste helps to conserve natural resource because the most of polymer materials are made from oil and gas. This paper reviews the recent progress on recycling of polymeric waste form some traditional polymers and their systems (blends and composites) such as polyethylene (PE), polypropylene (PP), and polystyrene (PS), and introduces the mechanical and chemical recycling concepts. In addition, the effect of mechanical recycling on properties including the mechanical, thermal, rheological and processing properties of the recycled materials is highlighted in the present paper.     

Reinforcement of recycled PP polymers by nanoparticles incorporation

Recycling process seems to be the most efficient way to reduce ecological impacts of used polymers. Nevertheless, the properties of the recycled PP polymer are proved to be insufficient during its reuse, particularly with regard to its thermo-mechanical and rheological behaviors. The incorporation of nanoparticles as fillers into polymer matrix seems to be one of the most successful solutions to upgrade recycled PP polymer. This paper presents an overview on the application of different nanofillers such as clay, calcium carbonate (CaCO₃), Silica (SiO₂), Zinc Oxide (ZnO), carbon black (CB), carbon nanotubes (CNT), antioxidizers and others into recycled PP matrix. Literature works on the effects of nanofillers on obtained nanocomposites are extensively studied. The first section deals with PP recycling and its impact on thermal, mechanical and rheological properties of the polymer. Then, the second part summarizes recent studies on the effects of nanoparticles incorporation on thermo-mechanical and rheological properties of recycled PP. Finally, recyclability of PP-based nanocomposites is discussed.     

Recycling of polyethylene terephthalate (PET Or PETE) plastics – An alternative to obtain value added products: A review

Waste management is become one of the world's most pressing issues. Plastic is one of the most widely utilised materials in the modern world. Plastic manufacturing and usage have risen globally in recent decades due to its low weight and outstanding mechanical properties. Plastic has a wide range of applications due to such good properties include lightweight, high strength, and extended durability. Because of plastics are non- or low-biodegradable, a vast quantity of plastic waste is generated every day, making waste disposal the most pressing matter globally. Furthermore, improper waste disposal pollutes the environment. An ecologically friendly approach is necessary to locket these issues. One of the solutions is to recycle this sort of garbage. There are many plastic recycling technologies available, however practically all of them have certain restrictions. Chemical recycling of plastic, on the other hand, has been shown to be more efficient than other recycling methods. This article provides a quick overview of chemical recycling of PET post-consumer waste and the synthesis of potentially value-added products such as dye or dyestuffs, bolaform surfactant, bio-degradable polyesters, drug carrier, Metal-organic framework (MOF), bio-degradable polymeric scaffolds, polyurethane foam and coating materials etc.     

The influence of the recycling stress history on LDPE waste pyrolysis

It is elementary to recognize the benefits and the negative impacts of the use of plastic materials on modern societies. Polyethylene (PE) is the major plastic component present in the municipal solid waste. In this paper, two types of low-density PE (LDPE) waste with different mechanical recycling stress histories were used to investigate the influence of recycling cycles on pyrolysis. The kinetic triplet and thermal degradation study were obtained using TGA data.To determine the sample composition and hydrocarbon arrangements, ultimate, proximate and X-ray diffraction analyses were carried out. Taking advantage of these analyses and combining them with differential scanning calorimetry (DSC) data, a series–parallel pyrolysis pathway was formulated. The waste of recycled polyethylene presented low enthalpy of pyrolysis, at about 205 J/g against 299 J/g for a virgin PE. The DSC analyses evidenced a multi-step reaction behavior of the pyrolysis, confirmed by the kinetic study using different isoconversional methods: the waste of recycled polyethylene presented a higher variation of activation energies as a function of the fraction reacted. The main conclusion is that the results suggest that the recycling stress history promotes the increase of long carbon chains while weakening the boundary among the compounds. This explains the fact that recycled waste needs less activation energy than other samples to degrade thermally. Finally, different categories of low-density polyethylene wastes must be considered when dealing with either kinetics or modeling of the product recovery process.     

Current of plastic waste recycling technologies and their prospects in Japan

In Japan, full-scale waste plastic recycling business started around 1970. Since then, in parallel with the efforts to develop new uses of recycled products, remarkable progress has also been made in recycling/molding technologies. The most popular recycling/molding technologies applicable to thermoplastics are of melt-and-mold type. This presentation discusses the technologies in their present situations, economics and existing disadvantages. The quality standards are set for some recycled products, the relations among recycling technologies, products' physical properties, and quality standards. Among others, explanations are given of waste-derived solid fuel manufacturing technologies, incineration technologies paired with thermal energy recovery currently available.     

Prerequisites for successful recycling of polymer waste

An increasing awareness of ecological problems will enhance all activities towards recycling of polymers. In other words, we have to expect a fast increasing amount of recycled polymers. Today, most activities concentrate on the economical feasible part of recycling - waste of higher prized plastics, only slightly contaminated plastic waste. Public pressure and legislation request solutions for heavily contaminated commodity plastics from household waste as well. The strategy to produce thick walled, profiles out of comingled plastics will be a contribution towards, but not the solution of the problem. We have to make the serious attempt to separate specific polymers like PE, PS, PET from the waste and to introduce these recyclates into the plastic market. In other words, we have to establish closed loops for all our products. Tremendous problems lay ahead of us in order to accomplish it. We need markets for recyclate, we have to change specifications accordingly, we have to improve existing technologies for work up, we have to develop “raw material” specifications when we turn waste in an economic good, we have to develop scenarios for unsufficient economics. The paper will deal with all these aspects in detail and will discuss the present situation in Germany.     

Cu(BDC) as a catalyst for rapid reduction of methyl orange: room temperature synthesis using recycled terephthalic acid

Terephthalic acid was recycled from waste PET bottles with a basic hydrolysis technique and characterized with UV and FTIR spectroscopy. Copper-based metal–organic framework Cu(BDC) was synthesized at room temperature without any additive; two different temperatures were chosen to activate the obtained material. Characterization studies were performed using XRD, N₂ physisorption, STEM and EDX. The obtained material was tested as a catalyst for the reduction of methyl orange with NaBH₄ in aqueous solutions. Thermal activation at 160 °C proved to be mandatory for catalytic activity; although higher temperature activation did not cause significant enhancement. Rapid dye removal was monitored by continuous photometry at λ _max. The results were quite satisfactory (about 85% removal in 5 min); even higher than the published results for precious metal (i.e., Au, Pt and Ag) nanoparticles. In an increased reaction scale, UV–visible spectra and mass spectrum were recorded to help elucidating the possible reaction mechanism. In addition, recycling experiment were performed in 100-ml scale without any kind of re-activation (washing or drying) to show the ability of Cu(BDC) as a stable catalyst for reductive dye removal (and probably similar reactions as well).     

Recovery of neptunium from highly radioactive waste solutions of PUREX origin using CMPO

The partitioning and recovery of²³⁷Np from three types of simulated high level waste solutions originating from PUREX processing of spent nuclear fuels such as sulfate bearing high level waste (SB-HLW), HLW from a pressurised heavy water reactor (PHWR-HLW) and from a fast breeder reactor (FBR-HLW) have been carried out using a mixture of 0.2M CMPO and 1.2M TBP in dodecane. Quantitative extraction of neptunium was possible by either oxidizing it to the hexavalent state keeping K₂Cr₂O₇ at 0.01M concentration or by reducing it to tetravalent state keeping Fe²⁺ at 0.02M concentration. Stripping of neptunium was carried out using different reagents, such as dilute nitric acid, oxalic acid and sodium carbonate. Almost quantitative recovery of neptunium has been achieved during these studies.     

Recycling the Actinides,The Cornerstone of Any Sustainable Nuclear Fuel Cycles

The sustainability of the current nuclear fuel cycles is not completely achieved since they do not optimise the consumption of natural resource (only a very small part of uranium is burnt) and they do not ensure a complete and efficient recycling of the potential energetic material like the actinides. Promoting nuclear energy as a future energy source requires proposing new nuclear systems that could meet the criteria of sustainability in terms of durability, bearability and liveability. In particular, it requires shifting towards more efficient fuel cycles, in which natural resources are saved, nuclear waste are minimised, efficiently confined and safely disposed of, in which safety and proliferation-resistance are more than ever ensured. Such evolution will require (i) as a mandatory step, evolutionary recycling of the major actinides U and Pu up to their optimized use as energetic materials using fast neutron spectra, (ii) as an optional step, the implementation of the recycling of minor actinides which are the main contributors to the long term heat power and radiotoxicity of nuclear waste. Both options will require fast neutrons reactors to ensure an efficient consumption of actinides. In such a context, the back-end of the fuel cycle will be significantly modified: implementation of advanced treatment/recycling processes, minor-actinides recovery and transmutation, production of lighter final waste requiring lower repository space. In view of the 2012 French milestones in the framework of the 2006 Waste Management Act, this paper will depict the current state of development with regards with these perspectives and will enlighten the consequences for the subsequent nuclear waste management.     

Determination of metal additives and bromine in recycled thermoplasts from electronic waste by TXRF analysis

A new method for analysis of metal additives in recycled thermoplasts from electronic waste was developed, based on dissolving the samples in an organic solvent and subsequent analysis of the corresponding solutions or suspensions by total-reflection X-ray fluorescence spectroscopy (TXRF). The procedure proved to be considerably less time consuming than the conventional digestion of the polymer matrix. Additives containing Ti, Zn, Br, Cd, Sn, Sb, and Pb were analyzed in a hundred randomly selected samples from recycling, which provided an overview of the range of elemental concentrations in thermoplasts utilized for consumer electronics. The results were validated independently by instrumental neutron activation analysis (INAA), subsequent regression analysis confirmed the trueness of the chosen approach.     

Behaviour of organic pollutants in paper and board samples intended to be in contact with food

This paper deals with the study of volatile compounds present in a set of three paper and board (P&B) samples of different composition, surface treatment, grammage and thickness. The volatile compounds released by the packaging material (P&B) can be trapped on the food and may then affect the safety and health of consumers. To evaluate if the recycled P&B could be used as food packaging material, adsorption studies have been performed with a selection of chemical substances. The adsorption isotherms are provided. Partition coefficients between paper and air have been calculated for a series of volatile compounds used as model compounds to represent different families of contaminants commonly present in P&B. Values from 4 to 3243 were obtained at different temperatures. The analysis of volatile compounds have been carried out by automatic headspace coupled on-line with GC/MS in SIM mode. The results obtained are shown and discussed.     

A short review on latest developments in catalytic depolymerization of Poly (ethylene terephathalate) wastes

Chemical recycling of plastic wastes is top among the effective management of the solid wastes. Particularly the post-consumer polyethylene terephthalate (PET) plastic wastes mainly generated from the disposal of beverage bottles and placed third most produced polymeric waste. However, PET wastes could be chemically recycled using several types of homo-/heterogeneous acid or base catalysts, and an effective recycling process has yet to be achieved. Therefore, the present short review is intended to display recent reports on the depolymerization of PET polymer wastes. The review aimed to cover glycolysis and aminolytic depolymerization using various catalytic systems. There is a wide spectrum of catalytic systems such as metal oxides, ionic liquids, organic bases, nanoparticles, porous materials and microwave-assisted rapid depolymerization methods have been developed toward the yield enhancement of the depolymerized products. Ideologically, the present review would benefit the researchers in familiarizing themselves with the latest developments in this field.     

Poly(ethylene terephthalate) waste recycling and uses for enhancement of bioremediation of arsenic in groundwater

Various studies on arsenic pollution reveal that high concentrations of arsenic were found in many districts of western Uttar Pradesh, India. There arsenic concentrations were higher than the permissible limit given by the World Health Organization (WHO) and Bureau of Indian Standards (BIS). There is a requirement to bioremediate arsenic due to its harmful effect. On the other hand, Poly(ethylene terephthalate) was being repeatedly used as packaging materials, due to which various environmental issues regarding PET waste disposal have generated. In the present study, PET waste was recycled into various aromatic amides by aminolysis and ammonolysis. These aromatic amides were used as surfactants. Various studies have been carried out for biosorption of heavy metal through Bacillus cereus. The efforts were made to enhance bioremediation of arsenic in different water samples spiked with Bacillus cereus in the presence of synthesized aromatic amides. This study explored the possibility to increase bioremediation of arsenic by bacteria using recycled PET waste. The results of this study indicated that in the presence of aromatic amides the percent biosorption could be enhanced by bacteria up to 20–60%.The other significant approach of this study is recycling of PET waste.     

Plasma arc process systems,reactors, and applications

Thermal plasma arc systems are being applied to a wide variety of high-temperature applications. The use of electricity is proving to be a cost-effective alternative for the treatment of industrial wastes, recycling of scrap, upgrading of existing metallurgical processes, and new methods for the production of materials. Thermal plasma arc reactors are classified according to; (1) the mode of arc attachment, as nontransferred and transferred: and (2) the site for energy and/or mass transfer, as dispersed phase or condensed phase (bulk, film and packed bed). Unique features in the design of plasma reactor systems and applications in waste treatment and metals production are discussed.     

Pretreatment of Plastic Waste: Removal of Colorants from HDPE Using Biosolvents

Plastics recycling remains a challenge due to the relatively low quality of the recycled material, since most of the developed recycling processes cannot deal with the additives present in the plastic matrix, so the recycled products end up in lower-grade applications. The application of volatile organic solvents for additives removal is the preferred choice. In this study, pretreatment of plastic packaging waste to remove additives using biosolvents was investigated. The plastic waste used was high-density polyethylene (HDPE) with blue and orange colorants (pigment and/or dye). The first step was to identify the type of colorants present in the HDPE, and we found that both plastics presented only one colorant that was actually a pigment. Then, limonene, a renewable solvent, was used to solubilize HDPE. After HDPE dissolution, a wide range of alcohols (mono-, di-, and tri-alcohols) was evaluated as antisolvents in order to selectively precipitate the polymer and maximize its purity. The use of limonene as solvent for plastic dissolution, in combination with poly-alcohols with an intermediate alkyl chain length and a large number of hydroxyl (OH) groups, was found to work best as an antisolvent (1,2,3-propanetriol and 1,2,4-butanetriol), leading to a removal of up to 94% and 100% of the blue and orange pigments, respectively. Finally, three cycles of extraction were carried out, proving the capability of the solvent and antisolvent to be recovered and reused, ensuring the economic viability and sustainability of the process. This pretreatment provides a secondary source of raw materials and revenue for the recycling process, which may lead to an increase in the quality of recycled polymers, contributing to the development of an economical and sustainable recycling process.     

Continuous matrix-assisted refolding of proteins

A refolding reactor was developed for continuous matrix-assisted refolding of proteins. The reactor was composed of an annular chromatography system and an ultrafiltration system to recycle aggregated proteins produced during the refolding reaction. The feed solution containing the denatured protein was continuously fed to the rotating bed perfused with buffer promoting folding of the protein. As the protein passed through the column, it was separated from chaotropic and reducing agents and the refolding process took place. Native proteins and aggregates could be continuously separated due to different molecular size. The exit stream containing aggregates was collected, concentrated by ultrafiltration and recycled to the feed solution. The high concentrations of chaotropic and reducing agents in the feed solution enabled dissociation of the recycled aggregates and consequently were fed again to the refolding reactor. When the initial feed mixture of denatured protein is used up, only buffer-containing chaotropic agents and recycled aggregates are fully converted to native protein. This process resulted in a stoichiometric conversion from the denatured protein to its correctly folded native state. The system was tested with bovine alpha-lactalbumin as model protein. Superdex 75 PrepGrade was used as size-exclusion medium. The yield of 30% active monomer in the batch process was improved to 41% at a recycling rate of 65%. Assuming that the aggregates can be redissolved and recycled into the feed stream in a quantitative manner, a refolding yield close to 100% is possible. The method can be also applied to other chromatographic principles suited for the separation of aggregates.