X射线荧光光谱法测定土壤和水系沉积物等样品中碳、氮、氟、氯、硫、溴等42种主次和痕量元素

采用粉末压片制样,用X射线荧光光谱法测定土壤、水系沉积物等样品中C、N、F、S、Cl、Br、Na、Mg、Al、Si、P、K、Ca、Ti、Mn、Fe、Co、Ni、Cu、Zn、Pb、Ga、As、Rb、Sr、Y、Zr、Nb、Th、U、Ba、La、Ce、Nd、Ge、Yb、W、Hf、Sc、Sn、Mo、Cs等42种元素。着重研究了C、N、F、S和Cl等元素的测量条件和存在问题;并研究了痕量元素的背景选择和谱线重叠校正的问题。方法的检出限,精密度和准确度绝大多数能满足覆盖区多目标地球化学调查样品的质量要求。     

元素医学食疗法治病有疗效

南京金陵微量元素与健康研究所用元素医学食疗法治疗冠心病、癌症、脑血管病、老年痴呆症、糖尿病、艾滋病、帕金森氏综合症、脑中风及其后遗症、小儿脑瘫、系统性红斑狼疮、癫痫、精神分裂症、血小板减少、肌痉挛、肌无力、肌萎缩、胆汁反流、偏头痛、前列腺肥大、性机能低下、不孕、不育、肝胆结石、脱发、斑秃、白瘢风、银屑病、再障贫血、血友病、白血病、荨麻疹、哮喘、风湿、类风湿、高（低）血压、高血脂、高血糖、高血沉、高尿酸、动脉硬化、骨质疏松、元素中毒症,地方病,遗传病等现代医学界束手无策的疑难病症,先后都获得了很好的疗效。     

中国化学会的发起和成立

1932年8月1日,当时的教育部在南京召开化学讨论会,讨论化学译名、国防化学及课程标准。来自各地曾经留学欧、美、日的化学学者,丁嗣贤、王箴、王琎、巴文峻、戈福祥、朱骥、沈熊庆、吴承洛、吴沆、李方训、李乃尧、李运华、周萃禨、林大中、林继庸、邵家麟、胡安恺、姚万年、陶延桥、容启兆、徐宗涑、徐作和、时昭涵、倪则埙、高露德、张江树、张洪沅、张郁岚、张资琪、康辛元、陈之霖、陈可忠、陈裕光、曾昭抡、程瀛章、邬保良、叶     

元素医学食疗法治病有疗效

南京金陵微量元素与健康研究所用元素医学食疗法治疗冠心病、癌症、脑血管病、老年痴呆症、糖尿病、艾滋病、帕金森氏综合症、脑中风及其后遗症、小儿脑瘫、系统性红斑狼疮、癫痫、精神分裂症、血小板减少、肌痉挛、肌无力、肌萎缩、胆汁反流、偏头痛、前列腺肥大、性机能低下、不孕、不育、肝胆结石、脱发、斑秃、白癜风、银屑病、再障贫血、血友病、白血病、荨麻疹、哮喘、风湿、类风湿、高（低）血压、高血脂、高血糖、高血沉、高尿酸、动脉硬化、骨质疏松、元素中毒症,地方病,遗传病等现代医学界束手无策的疑难病症,先后都获得了很好的疗效。     

糖尿病人血清18种元素与肾功能、血脂、心功能等因素的分析

测定56例非胰岛素依赖型糖尿病人血清Cu、Se、Zn、Cr、Mn、Fe、Co、V、Cd、Pb、B、Al、Sr、As、Ti、Ni、Ba、Mg等18种微量元素，并以上述18种元素分别作为因变量，以血糖、血脂、肾功能、心功能等指标为自变量，作多因素逐步回归分析．能建立回归方程的微量元素有Cu、Mn、Zn、Co、Fe、Sr、Se、Cd、B、Mg、Ba．糖代谢有关的FBG、PBG、GHb均未能进入模型。能进入模型有与肾功能有关的CR、β2-Mg、Pu，与血脂代谢有关的TG、TC、LDL-Ch、VLDL-Ch、HDL-Ch及与心功能有关的EF．糖尿病人血清Cu、Mn、Co与病人的肾功能指标(CR、β2-Mg或Pu)相关，Mn、Se、Cd、B、Mg、Ba与血脂代谢指标相关，Zn、Co、Mg与心脏EF相关．     

三七生长初期不同部位微量元素的含量测定

采用电感耦合等离子体发射光谱法(ICP-AES),对文山地区GAP种植及农户常规种植的生长初期三七不同部位中的微量元素Mg、P、Ca、Mn、Na、Fe、Co、Cu、Zn、Mo、Cr、Ni、Ge、Se等14种元素进行了测定分析。结果表明,三七的根、茎、叶中含有丰富的人体必需Mg、P、Ca、Mn、Na、Fe、Co、Cu、Zn、Mo、Ge、Se等有益元素,且P、Ca、Mg、Fe含量较高,Na、Mn、Co、Zn次之,Co、Mo、Cr、Ni、Ge、Se含量均较低。为三七GAP栽培标准和特征制订、三七道地药材的化学特征——化学指纹图谱的建立及研究提供理论依据。     

物理化学学报

<正>投稿范围热力学、动力学和结构化学化学平衡与热力学参数、量热学、非平衡态热力学与耗散结构、统计热力学、宏观动力学、分子动态学、超快动力学、激发态、溶液化学、复杂流体、溶液结构、大气化学、动态结构、分子结构、体相结构、簇、谱学理论与计算化学量子化学、统计力学、模拟方法与应用、计算化学、化学信息学胶体与界面化学表面活性剂、分散体系与流变性能、分子组装与聚集体、大分子、界面结构催化和表面科学多相催化、均相催比、仿生催化、光催化、环境化学、绿色化学、膜、表面结构、表面吸附     

电热板消解与密闭罐消解对土壤中49种矿质元素ICP-MS法检测的影响

分别采用电热板消解和密闭罐消解进行土壤样品前处理,根据加标回收实验和国家标准物质(GBW07403)验证实验,结果显示,使用电热板消解-ICP-MS法分析土壤中铍、锂、钒、铬、锰、钴、镍、铜、锌、镓、锗、砷、硒、锶、锆、铌、钼、钯、银、镉、铟、锡、钡、钽、钨、铼、铊、铅、铀可获得较好的准确性和精密度,而密闭消解罐消解-ICP-MS法则更适于土壤中钪、钇、镧、铈、镨、钕、钷、钐、铕、钆、铽、钬、铒、铥、镱、镥、铱、铂、金、钍的检测,各元素的检出限为0.311～94.36 ng/L,相对标准偏差为0.55%～5.03%.表明不同消解方法适于土壤中不同矿质元素的检测.应用所建立的方法,对新疆地区2个葡萄园的土壤样品中49种矿质元素进行了分析.     

微量元素与食物

含钙高的食物:牛奶、黄豆、乳制品、海参、海带、蚕豆、豆制品、芝麻酱、虾皮、燕麦、小麦、酸奶、牛肉等。含镁高的食物:荷叶、香蕉、黄豆、蕃茄、绿豆、红小豆、蕃石榴、蜂蜜、燕麦等。含锌高的食物:牡蛎、猪肝、鱼类、高锌鸡蛋、板栗、核桃、红枣、黄鳝、海参等。含铁高的食     

物理化学学报

正化学平衡与热力学参数、量热学、非平衡态热力学与耗散结构、统计热力学、宏观动力学、分子动态学、超快动力学、激发态、溶液化学、复杂流体、溶液结构、大气化学、动态结构、分子结构、体相结构、簇、谱学。量子化学、统计力学、模拟方法与应用、计算化学、化学信息学。     

Kinetics of photocrosslinking reactions of a DCPA/EA matrix in the presence of thiols and acrylates

The crosslinking efficiency and kinetics of a solid acrylic copolymer DCPA/EA (dicyclopentenyl acrylate/ethyl acrylate) matrix were investigated in the presence of pentaerythritol tetrakis (2-mercaptoacetate) (PETMP) or pentaerythritol tri- and tetraacrylates used as multifunctional crosslinking agents. The reaction of thiol and acrylate addition was sensitized by benzophenone (BP). The crosslinking efficiency of the DCPA/EA—BP—PETMP copolymer system, illuminated at high wavelengths (λ > 310 nm), was compared with that of the DCPA/EA matrix alone and the 2-component system copolymer DCPA/EA–BP. The concentrations of photosensitizer and crosslinking agent were varied from 1 to 10 mass %. The kinetics of tetrafunctional thiol addition and cyclopentene (pendant group of the DCPA/EA matrix) disappearance was followed through Fourier transform infrared (FTIR) and by determining the gel content. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2333–2345, 1997     

Kinetics of the potassium persulfate-initiated inverse emulsion polymerization of sodium acrylate solutions

The kinetics of the K₂S₂O₈-initiated inverse emulsion polymerization of aqueous sodium acrylate solutions in kerosene with Span 80 as the emulsifier has been studied. The conversion-time curves are S-shaped. The following expressions have been obtained for the maximum rate of polymerization and the molecular weight of the polymers under the experimental conditions investigated: R_max ∞ [K₂S₂O₈]^0.78[sodium acrylate]^1.5[Span 80]^0.1, (OVERLINE)M(/OVERLINE)_u ∞ [K₂S₂O₈]^−0.37[sodium acrylate]^2.9[Span 80]^−0.2. The activation energy for the maximum rate of polymerization is 94.8 kJ mol^−1. The results suggest a monomer–droplet–nucleation mechanism for the system studied. © 1996 John Wiley & Sons, Inc.     

新型芳基丙烯酸酯的合成及生物活性

依据活性亚结构的拼接原理,以Baylis-Hillman加成物为原料,设计并合成了5种新的芳基丙烯酸酯类化合物,经IR、1HNMR和元素分析测试技术确证;温室条件下测试了目标化合物的生物活性。结果发现,这些化合物在600ga.i./hm2的剂量下对供试靶标无杀虫活性;在400ga.i./hm2的剂量下对供试靶标无杀菌活性;在2000ga.i./hm2的剂量下,对阔叶杂草百日草(YOA)、苘麻(VEL)和禾本科杂草稗草(BYG)、马唐(CRG)均具有一定的除草活性。这些化合物结构全新,分子中具有多个可供修饰的基团,可作为除草活性的新型先导化合物提供进一步的优化。     

丙烯酸三苯基锡酯及其聚合物的合成和表征

合成了丙烯酸三苯基锡酯及其聚合物，通过ＩＲ、￣１ＨＮＭＲ、￣（１３）ＣＮＭＲ对其结构进行了表征，推断单体中的锡原子与羰基氧原子间存在分子间的配键，锡原子的配位数是５，而聚合物没有形成锡氧配键。     

丙烯酸2,2,3,3-四氟丙酯的合成

含氟丙烯酸树脂的性能明显优于普通丙烯酸类树脂,其表面能、折光率、摩擦系数均低,耐候、不粘、疏水、疏油、防尘、化学性质稳定,已用作纤维处理剂、皮革助剂、光纤涂覆剂、光纤材料、耐候涂料、齿科材料等。合成含氟丙烯酸树脂的单体,目前国内依赖进口,合成步骤多、反应周期长,使用的有机酸原料几乎都为甲基丙烯酸。本文使用丙烯酸和四氟丙醇(简称为N1醇)为原料,合成丙烯酸2,2,3,3-四氟丙酯(TFPA),考察了阻聚剂类型、原料配比、硫酸的添加量、反应时间等对产物收率的影响。     

醇溶性聚丙烯酸酯乳液的合成及性能研究

以丙烯酸乙酯(EA)、甲基丙烯酸甲酯(MMA)和甲基丙烯酸(MAA)为主单体,采用过硫酸盐作引发剂,经预乳化乳液聚合工艺合成了聚丙烯酸酯乳液.讨论了乳化剂种类、单体种类以及功能性单体、引发剂加入工艺对乳液聚合过程及乳液产品性能的影响.结果表明:单体组成为m(MMA)∶m(EA)∶m(MAA)=45∶40∶15所得乳液聚合物能满足使用性能要求;种子引发剂加入质量控制在单体总质量的0.3%,而总的引发剂用量占单体总质量的0.8%较适宜.用差热分析仪和凝胶渗透色谱仪对乳液聚合物进行了表征.     

酯交换法合成丙烯酸氯乙醇酯

丙烯酸卤代烷酯是重要的精细化工原料和中间体,一般的合成方法是直接酯化法。已有文献报道采用酯交换工艺以丙烯酸甲酯为原料制备丙烯酸高碳烷酯和丙烯酸二甲氨基烷酯[1-4]。Nolan等人曾报道了氮杂环卡宾作为催化剂通过酯交换反应合成甲基丙烯酸卤代烷酯[5,6],但是其催化剂制备     

Modification of porous suspension‐PVC particles by stabilizer‐free aqueous dispersion polymerization of absorbed acrylate monomers

The present study describes modification of porous PVC particles by polymerization of a monomer/crosslinker/peroxide solution absorbed within the PVC particles. The modifying crosslinked polymers include butyl acrylate (BA) crosslinked with ethylene glycol dimethacrylate (EGDMA) and ethylhexyl acrylate (EHA) crosslinked with EGDMA. The monomer solution is blended with the PVC particles by dry‐blending. The monomer absorbed particles are then polymerized in a stabilizer‐free aqueous dispersion‐polymerization. The modified semi‐IPN PVC particles have better stability than the neat PVC particles in packed columns for absorption of halo‐organics from water, etc. The modified semi‐IPN PVC particles are melt processable and thus have the potential of being interesting and useful modified rigid PVC materials. The modified PVC particles characterization includes polymerization yield, non‐extractables and porosity measurements and also morphology and dynamic mechanical behavior (DMTA). PBA and PEHA polymerization has shown high yield levels. The high conversion of BA and EHA within the particle, is partly due to their low solubility in water. The levels of non‐extractable fractions found are indicative of low chemical interaction between the polyacrylate/PVC phases in the particle. The modified PVC particle's porosity levels indicate that BA and EHA partly polymerize within the PVC particles' bulk and partly in the pores as crusts covering the PVC pore surfaces. This finding is supported by SEM observations of unetched and etched freeze fractured surfaces. Higher crosslinking levels of the polyacrylate modification promote compatibility with the PVC particles' bulk. DMTA measurements show two loss modulus peaks for the 0.5%EGDMA blends in the glass transition temperature region, suggesting imcompatibility. However, at 5%EGDMA a single transition is found exhibiting enhanced compatibility owing to the high degree of crosslinking, which prevents phase separation. Copyright © 2002 John Wiley & Sons, Ltd.     

Straightforward synthesis of poly(lauryl acrylate)-b-poly(stearyl acrylate) diblock copolymers by ATRP

Lauryl (LA) and stearyl (SA) acrylates were successfully polymerized by atom transfer radical polymerization (ATRP), leading to well defined homopolymers and diblock copolymers (PDI < 1.2). Interestingly, the polymerization was very well controlled using N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA), a ligand which had initially been reported to be unadvisable for the polymerization of such monomers. Both kinetic studies and chain extension reactions supported our conclusions. A PLA₆₅-b-PSA₄₇ diblock copolymer was characterized by differential scanning calorimetry and dynamic thermo-mechanical analysis, revealing that both blocks exhibit side-chain crystallinity and phase segregate in the crystalline state. The diblock behaves as a brittle rigid polymer when both blocks are crystalline, as a ductile material after the melting of the PLA phase and becomes a viscous liquid when both blocks are molten. This work could be extended to the preparation of PSA-b-PLA-b-PSA bio-issued thermoplastic elastomers.     

丙烯酸三苯甲酯及其衍生物的不对称聚合反应

含有大位阻基团的1,1-双取代α,β-不饱和酯,诸如甲基丙烯酸三苯甲酯(TrMA)、甲基丙烯酸邻甲苯基二苯基甲酯(DPIMA),在不对称聚合反应中,能够形成具有单手螺旋构象的旋光性聚合物。这类聚合物因具有独特的手性识别能力而一直为人们所瞩目。现有的研究结果表明,在这类单体的不对称聚合反应中,手性配体如鹰爪豆碱[(—)-Sp]决定着聚合产物