A Facile One‐Pot Synthesis of Functionalized 1,5‐Dihydro‐2H‐[1]benzopyrano[2,3‐b]pyridin‐5‐ones

The highly reactive 1 : 1 intermediate generated in the reaction between dialkyl acetylenedicarboxylate (=but‐2‐ynedioic acid dialkyl ester) 4 and triphenylphosphine was trapped by 2‐amino‐4‐oxo‐4H‐1‐benzopyran‐3‐carboxaldehydes 5 to yield highly functionalized dialkyl‐1,5‐dihydro‐5‐oxo‐1‐phenyl‐2H‐[1]benzopyrano[2,3‐b]pyridine‐2,3‐dicarboxylates in high yield.     

Efficient One‐Pot Synthesis of Alkyl 2‐(Dialkylamino)‐4‐phenylthiazole‐5‐carboxylates and Single‐Crystal X‐Ray Structure of Methyl 2‐(Diisopropylamino)‐4‐phenylthiazole‐5‐carboxylate

The reaction between secondary amines, benzoyl isothiocyanate, and dialkyl acetylenedicarboxylates (=dialkyl but‐2‐ynedioates) in the presence of silica gel (SiO₂) led to alkyl 2‐(dialkylamino)‐4‐phenylthiazole‐5‐carboxylates in fairly high yields. The structures of the products were confirmed by their IR, ¹H‐ and ¹³C‐NMR, and mass spectra, and by a single‐crystal X‐ray structure determination.     

Efficient Synthesis of Dialkyl (2Z)‐2‐[(E)‐1‐Aryl‐2‐(3‐arylquinoxalin‐2‐yl)ethenyl]but‐2‐enedioates

The reaction of dialkyl acetylenedicarboxylates 4 with 1‐aryl‐2‐[(3‐arylquinoxalin‐2(1H)‐ylidene)ethanones 3 in the presence of Ph₃P leads to dialkyl (2Z)‐2‐[(E)‐1‐aryl‐2‐(3‐arylquinoxalin‐2‐yl)ethenyl]but‐2‐enedioates 1 in good yields.     

Formation of Dialkyl 2‐[3‐Alkoxy‐1‐(alkylimino)‐1‐chloro‐3‐oxopropan‐2‐ylidene]hydrazine‐1,1‐dicarboxylates of α‐(Alkoxycarbonyl)imidoyl Chlorides from PhosphineDiazo Ester Zwitterions and Nef‐Isocyanide Adducts

A novel transformation involving phosphine? diazo ester zwitterions (generated from dialkyl azodicarboxylates with Ph₃P) and α‐(alkoxycarbonyl)imidoyl chlorides (prepared from α‐addition of acyl chlorides to alkyl isocyanides) to afford dialkyl 2‐[3‐alkoxy‐1‐(alkylimino)‐1‐chloro‐3‐oxopropan‐2‐ylidene]hydrazine‐1,1‐dicarboxylates in moderate yields, is described.     

A Three‐Component One‐Pot Synthesis of Functionalized 5,5‐Dicyanocyclopenta‐1,3‐dienes from Arylidene­malononitriles,Activated Acetylenes,and KCN or KSCN

The reaction of dialkyl acetylenedicarboxylates with arylidenemalononitriles in the presence of KSCN in MeCN led to a mixture of dialkyl (3E)‐4‐aryl‐3‐(arylideneamino)‐5,5‐dicyanocyclopenta‐1,3‐diene‐1,2‐dicarboxylates and dialkyl 4‐aryl‐5‐cyanothiophene‐2,3‐dicarboxylates. When these reactions were performed in the presence of KCN, only the functionalized 5,5‐dicyanocyclopenta‐1,3‐dienes were obtained.     

Polyoxometalate immobilized on MOF‐5 as an environment‐friendly catalyst for the synthesis of poly‐functionalized 3‐pyrrolin‐2‐ones

A polyoxometalate immobilized on MOF‐5 (POM/MOF‐5) material has been synthesized and evaluated for the diversity‐oriented synthesis of poly‐functionalized 3‐pyrrolin‐2‐ones via pseudo‐four‐component reaction between dialkyl acetylenedicarboxylate, amines, and aldehyde. The catalyst can be separated from the reaction mixture and reused at least five times with superior activity.     

Multicomponent Transformation of Isoindoline‐1,3‐diimine (=1H‐Isoindole‐1,3(2H)‐diimine), Acetylenic Esters,and Triphenylphosphine to Novel Dihydropyrimido[2,1‐a]isoindole Derivatives

The three‐component reaction of the zwitterions generated from dialkyl acetylenedicarboxylates (=dialkyl but‐2‐ynedioates and triphenylphosphine (Ph₃P) with isoindoline‐1,3‐diimine (=1H‐isoindole‐1,3(2H)‐diimine) is described (Scheme 1). This reaction affords the corresponding special type of substituted dihydropyrimido[2,1‐a]isoindole derivatives in good yields without using any catalyst and activation (Table).     

Synthesis and characterization of second‐generation S,S‐dialkyl‐S‐(dimethylhydroxyphenyl)sulfonium salt photoinitiators

A new, simplified method has been developed for the synthesis of S,S‐dialkyl‐S‐(dimethylhydroxyphenyl)sulfonium salt cationic photoinitiators. This novel method has successfully been used for the preparation of S,S‐dialkyl‐S‐(3,5‐dimethyl‐4‐hydroxyphenyl)sulfonium and S,S‐dialkyl‐S‐(3,5‐dimethyl‐2‐hydroxyphenyl)sulfonium salts showing a wide variation in the length and structure of the alkyl chains on the positively charged sulfur atom. These photoinitiators can also be prepared with a wide variety of different anions. The manipulation of the lengths of the alkyl chains permits the design of compatible photoinitiators for highly nonpolar monomers and oligomers such as epoxy‐functional silicones, epoxidized polybutadiene, and epoxidized vegetable oils. This article describes the synthesis and characterization of these photoinitiators. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2556–2569, 2003     

Cyclization of dialkylpropyn‐1‐yl(allyl)(3‐isopropenylpropyn‐2‐yl)ammonium bromides and water‐base cleavage of 2,2‐dialkyl‐5‐methyl‐2,6,7,7a‐tetrahydro‐1h‐isoindolium and 2,2‐dialkyl‐5‐methylisoindolinium bromides

Dialkylpropyn‐1‐yl(or allyl)(3‐isopropenylpropyn‐2‐yl)ammonium bromides under base‐catalyzed condition instantly undergo intramolecular cyclization. The cyclization of dialkylpropyn‐1‐yl(3‐isopropenylpropyn‐2‐yl)ammonium bromides leads to the formation of 2,2‐dialkyl‐5‐methylisoindolinium salts. In case of allyl analogs, instead of the expected 2,2‐dialkyl‐6‐methyl‐3a,4‐dihydroisoindolinium salts their isomeric forms ‐ 2,2‐dialkyl‐5‐methyl‐2,6,7,7a‐tetrahydro‐1H‐isoindolium bromides are obtained. In alkaline medium they are transform into the dihydroisoindolinium salts, the cleavage of which in two directions ‐ 1,2 and 1,6 leads to the mixture of isomeric dialkyl‐1,4‐dimethyl‐ and 2,4‐dimethylbenzyl‐amines. Study of the behavior of 2,2‐dialkyl‐5‐methylisoindolinium salts under conditions of water‐base cleavage showed, that only spiro[5‐methylisoindolyn]morpholinium bromide undergoes 1,2‐elimination, forming 5‐methylisoindoline 2‐vinyl ethyl ester.     

Three‐component One‐pot Synthetic Route to Functionalized N‐Phenyl‐ and N,N‐(1,4‐phenylene)‐2‐alkylimino‐2,3‐dihydrothiazoles under Mild,Solvent‐ and Catalyst‐free Conditions

A simple and efficient one‐pot synthesis of alkyl‐2‐(alkylimino)‐4‐methyl‐3‐phenyl‐2,3‐dihydrothiazole‐5‐carboxylate and dialkyl 3,3′‐(1,4‐phenylene)‐bis‐[2‐(alkylimino)‐4‐methyl‐2,3‐dihydrothiazole‐5‐carboxylate] derivatives from the reaction of phenylisothiocyanate (and also 1,4‐phenylene diisothiocyanate) and primary alkylamines in the presence of 2‐chloro‐1,3‐dicarbonyl compounds is described. This new protocol has several advantages such as lack of necessity of the catalyst and solvent, good yields,mild conditions and short times for reaction.     

One‐Pot Diastereoselective Synthesis of Densely Functionalized 2H‐Indeno[2,1‐b]furans. Single‐Crystal X‐Ray Structure of Dimethyl 8,8a‐Dihydro‐8‐oxo‐8a‐(2,2,2‐trichloroethoxy)‐2H‐indeno[2,1‐b]furan‐2,3‐di­carboxylate

Highly reactive 1 : 1 intermediates were produced in the reaction of Ph₃P and dialkyl acetylenedicarboxylates (=dialkyl but‐2‐ynedioates). Protonation of these intermediates by alcohols (2,2,2‐trichloroethanol, propargyl alcohol (=prop‐2‐yn‐1‐ol), MeOH, benzyl alcohol, and allyl alcohol (=prop‐2‐en‐1‐ol) led to vinyltriphenylphosphonium salts 4 , which underwent a Michael addition reaction with the conjugate base to produce the corresponding stabilized phosphonium ylides 5 (Scheme). Wittig reaction of the stabilized phosphonium ylides with ninhydrin ( 6 ) led to the corresponding densely functionalized 2H‐indeno[2,1‐b]furans 10 in fairly good yields (Table 1). The structures of the final products were confirmed by IR, ¹H‐ and ¹³C‐NMR spectroscopy, and mass spectrometry. The configuration of dimethyl 8,8a‐dihydro‐8‐oxo‐8a‐(2,2,2‐trichloroethoxy)‐2H‐indeno[2,1‐b]furan‐2,3‐dicarboxylate ( 10a ) was established by a single‐crystal X‐ray structure determination, establishing that the one‐pot multicomponent condensation reaction was completely diastereoselective.     

One‐Pot Synthesis of 4‐(2,3‐Dihydro‐2‐hydroxy‐1,3‐dioxo‐1H‐inden‐2‐yl)‐Substituted 1‐Aryl‐1H‐pyrazole‐3‐carboxylates via a Tandem Three‐Component Reaction

The hitherto unreported, highly functionalized 1H‐pyrazole‐3‐carboxylates 3 have been synthesized in good yields via a one‐pot three‐component domino reaction of phenylhydrazines, dialkyl acetylenedicarboxylates, and ninhydrin under mild conditions for the first time. No co‐catalyst or activator is required for this multicomponent reaction, and the reaction is, from an experimental point of view, simple to perform (Scheme 1). The structures of compounds 3 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization/addition reaction is proposed (Scheme 2).     

Time‐of‐flight secondary ion mass spectrometry and gas chromatography–mass spectrometry studies of alkanethiol self‐assembled monolayers on nanoporous gold surfaces

The dimerization of alkanethiol mixtures (hexanethiol, octanethiol, and dodecanethiol) to form self‐assembled monolayers (SAMs) from headspace on nanoporous gold surfaces was studied for the first time using gas chromatography (GC/MS) and time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS). The nanoporous gold surfaces were obtained by an acidic etching of a 585‐gold alloy. Field emission scanning electron microscopy (FE‐SEM) was utilized to study the change of the surface geometry and porosity of the gold surfaces before and after etching. Alkanethiols were deposited from the vapor phase above the thiol solutions (headspace) on nanoporous gold plates and nanoporous gold solid‐phase vmicroextraction (SPME) fibers. The nanoporous gold substrates were analyzed by TOF‐SIMS and GC/MS, respectively. The TOF‐SIMS spectra exhibited various gold–sulfur ion clusters and specific peaks related to the adsorption of thiols such as deprotonated monomers, thiolate–Au, dimers (e.g., dialkyl sulfides–Au and dialkyl disulfides–Au). The GC/MS analysis of headspace extractions of alkanethiol mixtures by nanoporous gold SPME fibers showed a high extraction efficiency of alkanethiol, dialkyl sulfide, and dialkyl disulfide when compared with the commercial SPME fibers (DVB‐CAR‐PDMS and CAR‐PDMS). Different GC/MS optimization factors were studied including the extraction time and desorption temperature.     

Isocyanide‐Based Three‐Component Synthesis of Pyrano‐pyrido‐quinoxalines

Pyrano‐pyrido‐quinoxaline derivatives were synthesized in good yields by a three‐component reaction of isocyanides, dialkyl acetylenedicarboxylates, and pyrido[1,2‐a]quinoxaline‐triones in DMF at 100°.     

Synthesis of Dialkyl 2‐(Alkylamino)‐4,9‐dihydro‐9‐oxocyclohepta[b]pyran‐3,4‐dicarboxylates

Dialkyl 2‐(alkylamino)‐4,9‐dihydro‐9‐oxocyclohepta[b]pyran‐3,4‐dicarboxylates are prepared in a one‐pot three‐component reaction of alkyl isocyanide, dialkyl acetylenedicarboxylate, and α‐tropolone (=2‐hydroxycyclohepta‐2,4,6‐trienone). The reaction proceeds smoothly at room temperature and under neutral conditions to afford tropolone derivatives in high yield.     

One‐Pot,Pseudo‐Five‐Component Synthesis of Bis[2‐(arylimino)‐1,3‐thiazolidin‐4‐ones]

Synthesis and characterization of bis[2‐(arylimino)‐1,3‐thiazolidin‐4‐ones] are described. The one‐pot, pseudo‐five‐component reaction of an aliphatic diamine, isothiocyanatobenzene, and dialkyl but‐2‐ynedioate at room temperature in anhydrous CH₂Cl₂ gives the title compound in relatively high yield. Under the same conditions, aromatic 1,2‐diamines yield 2‐(arylimino)‐N‐(enaminoaryl)‐1,3‐thiazolidin‐4‐ones in a pseudo‐four‐component reaction. Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 3).     

Facile One‐pot Synthesis of Substituted Dihydropyrrol‐2‐ones via Four‐component Domino Reaction of Amines,Dialkyl Acetylenedicarboxylates and Formaldehyde

A mild and efficient method for the one‐pot synthesis of substituted dihydropyrrol‐2‐one derivatives is described via four‐component domino reaction of amines, dialkyl acetylenedicarboxyaltes and formaldehyde in the presence of 1‐methyl‐2‐oxopyrrolidinium hydrogen sulfate ([Hpyro][HSO₄]) as ionic liquid catalyst. This facile approach proceeded smoothly in good to high yields and pure products are separated from the reaction mixture by simple filtration.     

Accelerating effects of N‐aryl‐N′,N′‐dialkyl ureas on epoxy‐dicyandiamide curing system

This report focuses on epoxy‐dicyandiamide (DICY) curing system accelerated by N‐aryl‐N′,N′‐dialkyl urea, aiming at clarifying the accelerating mechanism and the relationship between accelerating effect and molecular structure of the accelerators. Nine N‐aryl‐N′,N′‐dialkyl ureas were synthesized and investigated with measurements of differential scanning calorimetry, thermo gravimetric/differential thermal analysis and NMR spectroscopy. The results revealed that the ureas released the corresponding secondary amines by the thermal dissociation in the presence of epoxide, which led to the formation of tertiary amines that catalyze the addition reaction of DICY to epoxide. Moreover, a tendency that the ureas able to release more compact amines exhibited higher acceleration effects was discovered. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Multicomponent Reactions of Furan‐2,3‐diones: Synthesis and Characterizations of Furo[3,2‐c]pyran‐4‐ones

Furo[3,2‐c]pyran‐4‐ones, which possess a natural‐product skeleton, are synthesized via a simple, one‐pot, three‐component reaction of furan‐2,3‐diones with dialkyl acetylenedicarboxylates and Ph₃P.     

Synthesis of N,N‐Dialkyl‐9‐oxoacridine‐10(9H)‐carbothioamides via the Reaction of (2‐Halophenyl)(2‐isothiocyanatophenyl)methanones with Secondary Amines,Followed by Cyclization with NaH

The first preparation of acridin‐9(10H)‐ones carrying a tertiary thiocarbamoyl group at C(10), i.e., N,N‐dialkyl‐9‐oxoacridine‐10(9H)‐carbothioamides 9 , is described. The method is based on the reaction of (2‐halophenyl)(2‐isothiocyanatophenyl)methanones 7 , prepared from (2‐aminophenyl)(2‐halophenyl)methanones 5 by a convenient three‐step sequence, with secondary amines in DMF at room temperature to generate the corresponding thiourea derivatives 8 in situ, which are treated with NaH at 100–120° to provide the desired products in one‐pot reactions in generally good yields.