ZnS纳米球的水热法制备及其光催化性能研究

在表面活性剂十六烷基三甲基溴化铵(CTAB)的辅助下,以乙酸锌为锌源,硫脲(NH2)2CS为硫源,使用水热法通过改变反应时间,成功制备了不同粒径的ZnS球状颗粒。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、X-射线能谱,高分辨透射电子显微镜(HRTEM))、紫外可见分光光谱和光致发光谱(PL)等测试手段对样品的晶体结构、形貌、光学性质进行了分析。通过对不同粒径的ZnS纳米颗粒对亚甲基蓝的光催化降解的催化活性进行了评估。实验结果表明:在表面活性剂CTAB的作用下,随着反应时间的增加,生成的ZnS晶核生长成纳米颗粒,然后ZnS纳米颗粒将进一步发生团聚从而形成平均粒径超过500nm的ZnS纳米球,但制备的ZnS产物的晶体结构均为立方纤锌矿结构。随着ZnS粒径的增加,样品的紫外吸收峰从418nm逐渐蓝移到362nm,而PL发射峰位的峰强随着粒径的增大而增强。光催化结果显示,反应12h制备的ZnS纳米球的光催化性能最佳。     

球形Bi4Ti3O12制备及其可见光催化性能

采用水热法合成球形钛酸铋复合氧化物光催化剂,利用SEM、XRD和UV-Vis DRS等表征手段对复合氧化物的晶体结构、微观形貌和光学性能进行了分析,结果表明,制备的钛酸铋复合氧化物为10 nm的球形颗粒,具有良好的晶型结构,禁带宽度为2.7 nm,有较好的可见光吸收能力。以亚甲基蓝、甲基橙及酸性品红为目标污染物,研究了复合氧化物在可见光下的光催化降解有机污染物的性能,并对光催化降解机理进行了探讨。结果表明,在可见光照射下,该复合氧化物对酸性品红降解效果明显优于亚甲基蓝和甲基橙,光照150 min下,降解率可达91%。     

球形Bi_4Ti_3O_(12)制备及其可见光催化性能

采用水热法合成球形钛酸铋复合氧化物光催化剂,利用SEM、XRD和UV-Vis DRS等表征手段对复合氧化物的晶体结构、微观形貌和光学性能进行了分析,结果表明,制备的钛酸铋复合氧化物为10 nm的球形颗粒,具有良好的晶型结构,禁带宽度为2.7 nm,有较好的可见光吸收能力。以亚甲基蓝、甲基橙及酸性品红为目标污染物,研究了复合氧化物在可见光下的光催化降解有机污染物的性能,并对光催化降解机理进行了探讨。结果表明,在可见光照射下,该复合氧化物对酸性品红降解效果明显优于亚甲基蓝和甲基橙,光照150 min下,降解率可达91%。     

CdS/BiVO4复合半导体制备及其光催化性能

采用水热法以BiVO_4纳米片为基体原位生长CdS晶体,得到CdS/BiVO_4复合光催化剂,利用XRD、SEM、UV-Vis DRS等方法对材料进行了表征,通过降解亚甲基蓝对样品的光催化性能进行评价。结果表明,BiVO_4为方形片状颗粒,其表面附着棒状CdS纳米颗粒,分散较好。CdS/BiVO_4复合光催化剂表现出较高的光催化活性,在可见光照射下,利用CdS/BiVO_4光催化降解亚甲基蓝,60 min后的降解率达94.79%,相比于纯相BiVO_4和CdS有显著提高,且对多种有机染料均有良好的降解效果,重复使用性较好。机理研究发现,超氧自由基(·O_2~-)是CdS/BiVO_4光催化降解亚甲基蓝的主要活性物种。     

ZnS纳米球的水热法制备及其光催化性能研究

在表面活性剂十六烷基三甲基溴化铵(CTAB)的辅助下,以乙酸锌为锌源,硫脲(NH₂)₂CS为硫源,使用水热法通过改变反应时间,成功制备了不同粒径的ZnS球状颗粒.利用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线能谱,高分辨透射电子显微镜(HRTEM))、紫外可见分光光谱和光致发光谱(PL)等测试手段对样品的晶体结构、形貌、光学性质进行了分析.通过对不同粒径的ZnS纳米颗粒对亚甲基蓝的光催化降解的催化活性进行了评估.实验结果表明:在表面活性剂CTAB的作用下,随着反应时间的增加,生成的ZnS晶核生长成纳米颗粒,然后ZnS纳米颗粒将进一步发生团聚从而形成平均粒径超过500nm的ZnS纳米球,但制备的ZnS产物的晶体结构均为立方纤锌矿结构.随着ZnS粒径的增加,样品的紫外吸收峰从418nm逐渐蓝移到362nm,而PL发射峰位的峰强随着粒径的增大而增强.光催化结果显示,反应12h制备的ZnS纳米球的光催化性能最佳.     

溶液沉淀法制备ZnS-氟碳聚合物电纺纤维复合光催化材料

以含有羧基的氟碳聚合物电纺纤维毡为载体,采用均匀沉淀法于常温溶液中在纤维表面制备分布均匀、直径50 nm左右的硫化锌-氟碳聚合物电纺纤维复合光催化材料. 在紫外光照220 min时,对次甲基蓝降解的残留质量分数为0.03%,低于同等条件下的纳米ZnS粉体,重复5次光降解其仍具有较好的稳定性.     

CdS/ZnO复合光催化剂降解亚甲基蓝的研究

利用水热法合成具有层级片状结构的ZnO纳米片,再利用原位生长法得到不同CdS复合比的CdS/ZnO复合光催化剂。采用X射线粉末衍射(XRD)、紫外-可见漫反射吸收光谱(UV-Vis)等手段对所制备的光催化剂进行了表征,并考察了CdS/ZnO在可见光下光催化降解亚甲基蓝溶液的催化性能。研究表明,经CdS修饰后,其光催化性能明显提高。当亚甲基蓝初始浓度为5mg·L~(-1),催化剂用量为2g·L~(-1)时,光反应240min后,亚甲基蓝的降解率高达96%。同时,对CdS/ZnO复合光催化剂可见光降解亚甲基蓝的催化机理进行了分析。     

ZnS微米花的水热合成及光催化性质研究

本文采用简便的水热法一步合成ZnS微米花,通过X射线衍射仪、扫描电子显微镜等表征手段研究了合成产物的形貌及微观结构,并考察了合成产物的光催化性质。合成产物的光催化测试结果表明,在紫外光辐照下,产物对亚甲基蓝、甲基橙和曙红都有很好的降解效果。为了测试产物循环利用的光催化能力,对其进行了5次降解实验,结果显示产物依然保持良好的光催化活性。     

共沉淀法制备稀土Ce掺杂的纳米ZnO及其光催化降解染料的性能

以六水合硝酸锌和六水合硝酸铈?髥为原料,通过共沉淀法制备了一系列稀土Ce掺杂的纳米ZnO,并采用X射线粉末衍射(XRD)、傅里叶红外光谱(IR)、扫描电镜(SEM)、X射线能谱分析(EDS)、紫外可见漫反射光谱对其进行了全面表征。部分样品还通过X射线光电子能谱(XPS)和光致荧光光谱(PL)进行了进一步分析。分别在日光和紫外光条件下,对这一系列Ce掺杂的ZnO进行了光催化降解亚甲基蓝的性能研究,得出当Ce的掺杂量为3%(n/n)时(ZnO-3%Ce),其光催化活性最佳,光催化降解亚甲基蓝的效率均超过98%。选取ZnO-3%Ce作为催化剂,分别进一步考察其在日光和紫外光下对罗丹明B和甲基橙的光催化降解性能。研究结果表明,ZnO-3%Ce在日光和紫外光下均表现出较好的光催化降解效果,体现出良好的光降解普适性。日光下光降解效率顺序为:亚甲基蓝>罗丹明B>甲基橙,而紫外光下降解效率顺序为:罗丹明B>亚甲基蓝>甲基橙。最后,我们研究了催化剂ZnO-3%Ce的循环利用及稳定性性能。实验结果表明:该催化剂循环使用3次之后,光催化效率仍然稳定在97%以上,并且其结构和组成保持不变,体现出优异的稳定性和应用前景。     

水热法合成在可见光照射下具有高催化活性的纳米TiO2催化剂

 以丙酮为溶剂,采用水热法在240 ℃合成了表面吸附有机物的纳米TiO2粉体光催化剂,并采用XRD,TEM,UV-Vis和DRS等技术对催化剂进行了表征. 结果表明,合成的纳米TiO2催化剂在可见光激发下具有良好的光催化降解甲基橙的性能和较好的热稳定性. 经180,250和365 ℃热处理后,催化剂的晶型和尺寸没有变化,但催化剂表面吸附的有机物发生了明显变化. 催化剂表面吸附的有机物、可见光波段的光响应性能和可见光下催化降解甲基橙的效率之间存在良好的关联性,催化剂表面吸附适量的有机物可提高纳米TiO2催化剂在可见光波段的光响应性能,从而提高其在可见光照射下催化降解甲基橙的性能.     

Preparation of ZnS-Fluoropolymer nanocomposites and its photocatalytic degradation of methylene blue

The ZnS particles were immobilized on the surface of poly(vinylidene difluoride) (PVDF) mixing methacrylic acid (MAA)-trifluoroethyl acrylate (TFA) copolymer electrospun nanofibers. The PVDF and MAATFA copolymer nanofibers were prepared by electrospinning. Zinc ions were introduced onto the surface of nanofibers by coordinating with the carboxyls of MAA, and then sulfide ions were added to react with zinc ions to form ZnS particles under hydrothermal condition. The size and the amount of ZnS particles increased with the reaction time prolonging. The Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) results reveal that a chemical interaction exists between ZnS and fluoropolymer fibers. The degradation rate of methylene blue in ZnS-fluoropolymer nanocomposite system was considerably higher than in that of ZnS powders system under UV irradiation. There may be an adsorption-migration-photodegradation process during the degradation of methylene blue by using ZnS-fluoropolymer nanocomposites as photocatalyst. The photocatalytic activity of ZnS-fluoropolymer nanocomposites changes indistinctively after 10 times repeating tests.     

溶液沉淀法制备ZnS-氟碳聚合物电纺纤维光催化复合材料

利用含有羧基的氟碳聚合物电纺纤维为载体和模板材料,常温溶液条件下利用均匀沉淀法,在纤维表面负载硫化锌纳米粒子。通过控制反应条件,得到氟碳聚合物电纺纤维表面均匀分布、无团聚的直径在十几纳米左右的硫化锌-氟碳聚合物电纺纤维光催化复合材料。光催化复合材料的高比表面积和水中有机物富集能力使其在紫外光辐照条件下对次甲基蓝降解效率明显高于ZnS粉体。重复降解实验显示复合材料具有较好的稳定性和重复光催化能力。     

Structural, optical and photocatalytic studies of Fe doped ZnS nanoparticles

Fe doped ZnS nanoparticles (Zn_1?xFe_xS; where x = 0.00, 0.03, 0.05 and 0.10) were synthesized by a chemical precipitation method. The synthesized products were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope, ultraviolet–visible and photoluminescence spectrometer. The X-ray diffraction and transmission electron microscope studies show that the size of crystallites is in the range of 2–10 nm. Photocatalytic activities of ZnS and 3, 5 and 10 mol% Fe doped ZnS were evaluated by decolorization of methylene blue in aqueous solution under ultraviolet and visible light irradiation. It was found that the Fe doped ZnS bleaches methylene blue much faster than the undoped ZnS upon its exposure to the visible light as compared to ultraviolet light. The optimal Fe/Zn ratio was observed to be 3 mol% for photocatalytic applications.     

Facile Synthesis of Uniform Zinc-blende ZnS Nanospheres with Excellent Photocatalytic Activity toward Methylene Blue Degradation

Uniform and well-dispersed Zn S nanospheres have been successfully synthesized via a facile chemical route. The crystal structure, morphology, surface area and photocatalytic properties of the sample were characterized by powder X-ray diffraction(XRD), scanning electron microscopy(SEM), Brunauer-Emmett-Teller(BET) and ultraviolet-visible(UV-vis) spectrum. The results of characterizations indicate that the products are identified as mesoporous zinc-blende ZnS nanospheres with an average diameter of 200 nm, which are comprised of nanoparticles with the crystallite size of about 3.2 nm calculated by XRD. Very importantly, photocatalytic degradation of methylene blue(MB) shows that the as-prepared Zn S nanospheres exhibit excellent photocatalytic activity with nearly 100% of MB decomposed after UV-light irradiation for 25 min. The excellent photocatalytic activity of ZnS nanospheres can be ascribed to the large specific surface area and hierarchical mesoporous structure.     

Enhanced photocatalytic activity of ZnO nanoparticles by surface modification with KF using thermal shock method

ZnO nanoparticles were modified with KF using thermal shock method at various temperatures in order to improve the photocatalytic activity of ZnO under both UVA and visible light irradiation. The influences of KF-modification on the crystal structure, morphology, UV–visible absorption, specific surface area as well as surface structure of ZnO were respectively characterized by XRD, FE-SEM, UV–Visible diffuse reflectance, N₂ adsorption and XPS spectroscopy. The photocatalytic activity was evaluated via the degradation of methylene blue under UVA irradiation. According to the results, the thermal shock process with KF did not modify the structure, the particle size and the optical properties of ZnO nanoparticles but successfully increase their UVA and visible light induced photocatalytic activity. This enhancement of activity may be attributed to the increase of surface hydroxyl groups and zinc vacancies of modified ZnO samples.     

影响TiO2薄膜光催化降解亚甲基蓝的因素

 用中频交流反应磁控溅射技术制备了具有良好光催化性能的TiO2薄膜,考察了紫外光源、反应器和溶液浓度对亚甲基蓝溶液光催化降解特性的影响. 结果表明,紫外光源对TiO2薄膜光催化降解性能有较大的影响; 在计算光催化降解速率时应充分考虑光解和光氧化的影响. 低压汞灯TUV为光催化降解的较好选择. 动态反应系统可以有效避免光解,显著提高光催化反应速度. TiO2薄膜具有很好的光催化性能,且性能稳定.     

不同形貌ZnO@PANI纳米复合材料的制备及光催化性质

采用直接沉淀法和水热合成法制备出形貌和尺寸比较均一的颗粒状、棒状和球形花状的纳米ZnO。使用硅烷偶联剂KH-42(苯胺甲基三乙氧基硅烷,C₆H₅-NH-CH₂-Si(OCH₃)₃)对所得纳米ZnO进行表面化学修饰,修饰后的纳米ZnO(m-ZnO),经由皮克林乳液聚合法使苯胺单体在其表面聚合,形成聚苯胺(PANI)包覆的氧化锌纳米复合材料(m-ZnO@PANI),采用XRD、SEM、HRTEM、FTIR、UV-Vis、TG等对样品进行表征;研究了m-ZnO@PANI纳米复合材料对亚甲基蓝(MB)的光催化性能。结果表明,复合材料对可见光也有较强的吸收,在紫外、可见光照射下都有较好的光催化降解效率。其中,棒状ZnO纳米复合材料的光催化降解性能最好,它的紫外-可见光和可见光光催化降解率分别达到98.2%和97.1%,而且复合材料的光催化性能稳定,二次循环的紫外-可见光催化降解率仍达到96.0%。     

蛭石负载TiO2光催化剂的制备与性能

以新疆尉犁工业蛭石为载体,采用溶胶-凝胶法制备负载型二氧化钛光催化剂,利用XRD、TG、SEM、IR和低温N₂吸附－脱附对负载型二氧化钛进行表征,并以亚甲基蓝为目标降解物对其光催化性能进行研究。讨论了不同TiO₂负载量、反应温度和煅烧温度等因素对负载型二氧化钛光催化性能的影响,结果表明：TiO₂负载量为4.0wt%,反应温度为40 ℃,煅烧温度为400 ℃时,复合材料光催化效果最好,经60 W紫外灯照射20 min后,TiO₂/VMT复合材料对亚甲基蓝溶液的降解率为92.08%。     

Green biosynthesis and characterization of zinc oxide nanoparticles using Corymbia citriodora leaf extract and their photocatalytic activity

ABSTRACT

We reported a green and simple method for biosynthesizing zinc oxide nanoparticles (ZnO NPs) using Corymbia citriodora leaf extract as reducing and stabilizing agent. SEM, EDX, XRD, UV–VIS spectroscopy, Raman spectroscopy and TGA have been used for characterizing the biosynthesized ZnO NPs. The results indicating the ZnO NPs synthesized by C. citriodora leaf extract have high purity and the average size is 64?nm. The photocatalytic activity of the ZnO NPs has been investigated by degradation methylene blue under visible light irradiation. Due to the smaller size, the biosynthesized ZnO NPs showed an excellent photocatalytic performance.