Platinum-mercury compounds as intermediates to mono- and di-arylplatinum(II) complexes

The reaction of HgR₂ (R = 2,5-C₆H₃Cl₂; 2,3,4- and 2,4,6-C₆H₂Cl₃; 2,3,4,5-,2,3,4,6- and 2,3,5,6-C₆HCl₄ and C₆Cl₅) with Pt(PPh₃)₃ gives the new stable compounds [(PPh₃)₂RPt(HgR)] containing PtHg bonds. When R contains an ortho chlorine atom (R = 2,5-C₆H₃Cl₂; 2,3,4-C₆H₂Cl₃ and 2,3,4,5-C₆HCl₄) refluxing xylene solutions of these compounds gives the complexes [PtR₂-(PPh₃)₂], with simultaneous precipitation of mercury. In the other cases the initial compounds are recovered unaltered. All the compounds containing the PtHg bond react readily with CF₃COOH to give a new series of compounds of formula [Pt(O₂CCF₃)R(PPh₃)₂].     

Polychlorophenyl-platinum(II) complexes containing triphenylphosphine

A new method to prepare compounds of the type trans-[PtCl(R)(PPh₃)₂] (R = C₆H₅; 2,5-C₆H₃Cl₂; 2,3,4-, and 2,4,6-C₆H₂Cl₃; 2,3,4,5-, 2,3,4,6- and 2,3,5,6-C₆HCl₄ and C₆Cl₅) by reaction of cis-[PtCl₂(PPh₃)₂] and HgR₂ in the molten state is described.The reactions of the complexes with HCl, Cl₂ and I₂ have been examined in order to give information about the relative ease of cleavage of the various Ptaryl bonds. The replacement of Cl by NCS suggests an associative mechanism even for the complexes in which the polychlorophenyl ligand has chlorine atoms in both ortho positions.     

Demercuriation reactions of the complexes [(PPh3)2RPtHgR′] containing platinum-mercury bonds

The compounds [(PPh₃)₂,RPtHgR′] (R = CH₃, R′= 2,5-C₆H₃Cl₂, 2,3,4- and 2,4,6-C₆H₂Cl₃, 2,3,4,5-, 2,3,4,6- and 2,3,5,6-C₆HCl₄, C₆Cl₅; R = Et, R′ = 2,5-C₆H₃Cl₂, 2,4,6-C₆H₂Cl₃; R = 2-C₆H₄Cl, R′=2-C₆H₄(CH₃)) have been prepared by the reactions of RHgR′ with Pt(PPh₃)₃, in order to study their possible use as intermediates in the preparation of diorganoplatinum complexes with different organic ligands. The dependence of J(³¹P-¹⁹⁵Pt) on slight differences in the electronic character of the ligand R′ in the series of compounds [(PPh₃)₂(CH₃)Pt-HgR′] has been studied.     

Chlorinated organic derivatives containing MoHg and WHg bonds: Importance of the steric effects in their stabilization

A series of MoHg and WHg bonded complexes [RHgM(CO)₃Cp], (R = 2,4,6-C₆H₂Cl₃,2,3,5,6-C₆,HCl₄ and C₆Cl₅) have been prepared from ClHgR and the salts Na[M(CO)₃)Cp]. When R contains only one ortho chlorine atom (R = 2,5-C₆H₃Cl₂, 2,3,4-C₆H₂Cl₃ and 2,3,4,5-C₆HCl₄) a symmetrisation process occurs to give the corresponding HgR₂ and Hg[M(CO)₃Cp)₂2. These results indicate that steric effects are very important in the formation of compounds containing molybdenum- or tungsten—mercury bonds. Complexes of the type [(C₆Cl₅)HgM(CO)₂(PPh₃)Cp] (M = Mo and W) are obtained from [(C₆Cl₅)HgM(CO)₃Cp] and PPh₃ in boiling ethanol.     

Decomposition reactions of square-planar bis-aryl-cobalt(II) complexes

The organocobalt complexes [CoR₂L₂], with (a) L = PEtPh₂ and R = 2,3,5,6- C₆HCl₄, 2,4,6-C₆H₂Cl₃ and 2,6-C₆H₃Cl₂; and (b) R = 2,4,6-C₆H₂Cl₃ and L = PEt₃, PEt₂Ph, $\text{1}\text{2}$ dpe, 3,5-lut and $\text{1}\text{2}$ bipy, have been obtained by reaction of RMgX with [CoCl₂L₂] or by ligand exchange from [CoR₂(PEtPh₂)₂]. The decompositions in benzene and carbon tetrachloride, and under oxidative conditions have been studied. In benzene solutions, the stability decreases with decrease in the number of chlorine atoms in R. A mixture of RH and RR is obtained in a ratio which depends on the nature of L, the configuration of the complex, and the presence of oxidants. The thermal decomposition takes place through a tricoordinate intermediate “CoR₂L”, when L = phosphine, or directly from [CoR₂L₂] when L = amine. The oxidatively induced decomposition takes place through a cobalt(III) intermediate, which gives RR when L = phosphine or RX (X = H, Br) when L = amine. The process is intramolecular in all cases.     

On the structure of tetracoordinated organocobalt complexes of the type [CoR2L2]

A series of square-planar organocobalt complexes of the type [CoR₂L₂] (R = 2,3,4,6-C₆,HCl₄ and 2,3,6-C₆H₂Cl₃, L = PEtPh₂, PEt₂Ph, and PEt₃; R = 2,3,5,6-C₆HCl₄, and 2,6-C₆H₃Cl₂, L = PEt₂Ph, PEt₃, and $\text{1}\text{2}$dpe) have been prepared in which the electronegativities of the ligand R vary progressively. The reaction of o-C₆H₄ClMgBr with [CoCl₂L₂] (L = PEtPh₂ PEt₂Ph, γ-pic or $\text{1}\text{2}$bipy) did not give air stable compounds at room temperature, but the solutions obtained at ?78°C appear to contain square-planar species for L = PEtPh₂, PEt₂Ph, and γ-pic, and tetrahedral for L₂ = bipy. The tendency towards square-planar or tetrahedral structures for the compounds [CoR₂L₂] depends on the following factors in order of importance: (i) when the neutral ligand is a phosphine a square-planar structure is adopted; (ii) when L is an aromatic amine, bulky ortho substituents on R favour a square-planar structure; and (iii) a tetrahedral geometry is favoured by bidentate amine ligands. The electronegativity of the organic group R seems to be less important.     

Synthesis and phosphorus 31 n.m.r studies of neutral and cationic compounds with platinum-mercury bonds

Summary The preparation and properties of the following neutral and cationic compounds containing Pt-Hg bonds is described: [(PPh₃)₂ClPt-HgR] (R=2,4,6-C₆H₂Cl₃; 2,3,4,6- and 2,3,5,6-C₆HCl₄ and C₆Cl₅), and [(PPh₃)₂LPt-Hg(C₆Cl₅)]ClO₄ (L=pyridine, , and -picoline; 2,4-lutidine and -colidine). All the compounds have been characterized by³¹P n.m.r. spectroscopy. The dependence of P, J(³¹P-¹⁹⁵Pt) and²J(³¹P-¹⁹⁹Hg) on the slight changes of the electronic properties of the ligands L and R has been studied.     

Bi- and tetranuclear polyfluorophenyl-bridged gold(I) complexes

The reaction of RAuL (R = 2,4,6-C₆F₃H₂, 3,6-C₆F₂H₃, 4-C₆FH₄ or 3-CF₃C₆H₄; L = PPh₃ or AsPh₃) or RAudpeAuR with inorganic acids HA (A = ClO₄, BF₄ or PF₆) leads to binuclear complexes of the types [R(AuL)₂]A or [R(Au₂dpe)]BF₄. Similarly, reaction of NBu₄[Au(2,4,6-C₆F₃H₂)₂] with HPF₆ yields the tetranuclear complex Au₄(2,4,6-C₆F₃H₂)₄. Addition of RAuL to solutions obtained by treating ClAuL with AgA also gives compounds of the type [R(AuL)₂]A.     

Polyfluorophenylgold(I) complexes

Neutral polyfluorophenyl complexes of the type RAuL and RAuL-LAuR and anionic complexes of the type [AuR₂]^? (R = 2,3,5,6-C₆F₄H, 2,4,6-C,F₃H₂, 3,6-C₆F₂H₃, 4-C₆ FH₄ or 3-CF₃C,H₄) are obtained by the reaction of ClAuL (L = PPh₃, P(cyclohexyl)₃, AsPh₃ or tetrahydrothiophen; L-L = Ph₂PCH₂PPh₂ or Ph₂PCH₂CH₂PPPh₂) with an organolithium derivative and/or the replacement of the initial ligands L by other mono- or bi-dentate ligands.The outcome of the reaction of [AuR₂]^? with [Au(PCy₃)₂]⁺ (Cy = cyclohexyl), depends on the nature of the ligand R; thus with R = 3,6-C₆,F₂H₃ the product is [Au(PCy₃)₂][AuR₂], while with R = 2,4,6-C₆F₃H₂, the product is [Au(PCy₃)(2,4,6-C₆F₃H₂)].     

Preparation of linear α‐olefins to high‐molecular weight polyethylenes using cationic α‐diimine nickel(II) complexes containing chloro‐substituted ligands

A series of α‐diimine nickel(II) complexes containing chloro‐substituted ligands, [(Ar)N?C(C₁₀H₆)C?N(Ar)]NiBr₂ ( 4a , Ar = 2,3‐C₆H₃Cl₂; 4b , Ar = 2,4‐C₆H₃Cl₂; 4c , Ar = 2,5‐C₆H₃Cl₂; 4d , Ar = 2,6‐C₆H₃Cl₂; 4e , Ar = 2,4,6‐C₆H₂Cl₃) and [(Ar)N?C(C₁₀H₆)C?N(Ar)]₂NiBr₂ ( 5a , Ar = 2,3‐C₆H₃Cl₂; 5b , Ar = 2,4‐C₆H₃Cl₂; 5c , Ar = 2,5‐C₆H₃Cl₂), have been synthesized and investigated as precatalysts for ethylene polymerization. In the presence of modified methylaluminoxane (MMAO) as a cocatalyst, these complexes are highly effective catalysts for the oligomerization or polymerization of ethylene under mild conditions. The catalyst activity and the properties of the products were strongly affected by the aryl‐substituents of the ligands used. Depending on the catalyst structure, it is possible to obtain the products ranging from linear α‐olefins to high‐molecular weight polyethylenes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1964–1974, 2006     

Organomercury Compounds. 32. Syntheses of Fluorophenylmercurials by Decarboxylation

The organomercury compounds HgR₂ (R = 2-Cl,6-FC₆H₃, 2,6-F₂C₆H₃, 2,3,6-F₃C₆H₂, m-HC₆F₄, p-HC₆F₄, or C₆F₅) and RHg(O₂CR) (R = 2-Cl,6-C₆H₃, 2,6-F₂C₆H₃ or 2,3,6-F₃C₆H₂) have been obtained in moderate – good and low yields respectively from decarboxylation reactions of the corresponding mercury(II) fluorobenzoates in boiling pyridine. By contrast, mercury(II) 2,3,4-5-tetrafluorobenzoate gave a low yield of CO₂, a trace of Hg(o-HC₆F₄)₂ and a very low yield of o-HC₆F₄Hg(O₂CC₆F₄H-o). The ¹⁹⁹Hg NMR spectra of the diorganomercurials (R = 2-Cl,6-FC₆H₃, 2,6-F₂C₆H₃, 2,3,6-F₃C₆H₂, 2,4,6-F₃C₆H₂, 2,6-Cl₂C₆H₃, o-HC₆F₄, m-HC₆F₄, p-HC₆F₄ or C₆F₅) are discussed.     

Chlorobis(polyfluorophenyl)thallium(III) complexes and their reactions with gold(I) and tin(II) compounds

The reaction of TlCl₃ with RLi leads to complexes of the general formula TlR₂Cl (R = C₆F₅, p-C₆F₄H, m-C₆F₄H, 2,4,6-C₆F₃H₂, p-C₆FH₄ or m-CF₃C₆H₄). Some of these undergo oxidative addition reactions with gold(I) complexes to give polyfluorophenyl derivatives of the types AuR₂ClL and Au(C₆F₅)R₂(tht) (tht = tetrahydrothiophen), and with SnCl₂ to give oily materials from which stable solids of the general formula Q[SnR₂Cl₃] can be isolated by addition of QCl (Q = Et₄N or Ph₃BzP).     

Chlorine-photosensitized oxidations of chloroethanes and chloroethylenes in the gas phase

Long-chain chlorine-photosensitized oxidation has been observed in the gas phase at about 355°K for 1,1,2,2- and 1,1,1,2-C₂H₂Cl₄, C₂HCl₅, and C₂Cl₄ but not for C₂H₆, 1,2-C₂H₄Cl₂, 1,1,1-C₂H₃Cl₃, C₂H₄, and 1,2-C₂H₂Cl₂. This is shown to depend on the exothermicity of the dissociation of the chloroethoxy radicals which must be involved in each reaction system.     

Carbonyl rhodium(I) complexes with α-diimines ligands

The reactions of [Rh(CO)₂Cl]₂ with α-diimines, RN=CR′-CR′=NR (R = c-Hex, C₆H₅, p-C₆H₄OH, p-C₆H₄CH₃, p-C₆H₄OCH₃, R′ = H; R = c-Hex, C₆H₅, p-C₆H₄OH, p-C₆H₄OCH₃; R′ = Me) in 2:1 Rh/R-dim ratio gave rise to ionic compounds [(CO)₂Rh.R-dim(R′,R′)][Rh(CO)₂Cl₂] which have been characterized by elemental analyses, electrical conductivity, ¹H-NMR and electronic and IR spectroscopy. Some of these complexes must involve some kind of metal-metal interaction. The complex [Rh(CO)₂Cl.c-Hex-dim(H,H)] has been obtained by reaction of [Rh(CO)₂Cl]₂ with the c-Hex-dim(H,H) ligand in 1:1 Rh/R-dim ratio. The reactions between [(CO)₂Rh.R-dim(H,H)][Rh(CO)₂Cl₂](R = c-Hex or p-C₆H₄OCH₃) with the dppe ligand have been studied. The known complex RhCl(CO)(PPh₃)₂ has been isolated from the reaction of [(CO)₂Rh.R-dim(H,H)]-[Rh(CO)₂Cl₂] (R = c-Hex or p-C₆H₄OCH₃) with PPh₃ ligand.     

Metallorganische verbindungen des 1,2-diethinylbenzols vom typ o-C6H4(CCMR3)2 (M = Si,Ge, Pb)

The preparation of the compounds o-C₆H₄(CCMR₃)₂ (M = Si, Ge, Pb; R = CH₃; M = Pb; R = C₆H₅) is described. Their properties are compared with those of o-C₆H₄(CCSnR₃)₂ (R = CH₃, C₆H₅) and those of their p-isomers. The structures and bonding conditions proposed for these molecules are supported by dipole measurements, mass spectroscopy, IR, Raman, ¹H NMR and ¹³C NMR data.     

Triorganoantimon- und Triorganobismutderivate von Carbonsäuren fünfgliedriger Heterocyclen Kristall- und Molekülstruktur von (C6H5)3Sb(O2C-2-C4H3S)2

Inhaltsübersicht. Triorganoantimon- und Triorganobismutdicarboxylate R₃M[O₂C(CH₂)ⁿ-2-C₄H₃X]₂ (M = Sb, R = CH₃, C₆H₁₁, C₆H₅, 4-CH₃OC₆H₄; M = Bi, R = C₆H₅, 4-CH₃C₆H₄; n = 0, X = O, S, NH, NCH₃. M = Sb, R = CH₃, C₆H₅; M = Bi, R = C₆H₅; n = 1, X = O, S. M = Sb, R = C₆H₁₁, n = 1, X = S; R = 4-FC₆H₄, n = 0, X = O, S, NCH₃; R = 2,4,6-(CH₃)₃C₆H₂, n = 0, X = O, S, NH) wurden durch Reaktionen von R₃Sb(OH)₂ (R = CH₃, C₆H₁₁, 2,4,6-(CH₃)₃C₆H₂), R₃SbO (R = C₆H₅, 4-CH₃OC₆H₄, 4-FC₆H₄) bzw. R₃BiCO₃ mit den entsprechenden fünfgliedrigen heterocyclischen Carbonsäuren 2-C₄H₃X(CH₂)_nCOOH dargestellt. Auf der Basis schwingungsspektroskopischer Daten wird für alle Verbindungen eine trigonal bipyramidale Umgebung vom M (zwei O-Atome von einzähnigen Carboxylatliganden in den apikalen, drei C-Atome von R in den äquatorialen Positionen) vorgeschlagen, ferner eine schwache Wechselwirkung zwischen O(=C) jeder Carboxylatgruppe und M. Die Kristallstrukturbestimmung von (C₆H₅)₃Sb(O₂C–2-C₄H₃S)₃ stützt diesen Vorschlag. Die Verbindung kristallisiert triklin [Raumgruppe P$1; a = 891,8(14), b = 1058,2(12), c = 1435,6(9) pm, α = 68,53(8), β = 85,47(9), γ = 85,99(11)°; Z = 2; d(ber.) = 1,607 Mg m^–3; V(Zelle) = 1255,6 ų; Strukturbestimmung anhand von 3947 unabhängigen Reflexen (F_o > 3σ(F²_o)), R(ungewichtet) = 0,037]. Sb bindet drei C₆H₅-Gruppen in der äquatorialen Ebene [mittlerer Abstand Sb–C: 211,1(5)pm] und zwei einzähnige Carboxylatliganden in den apikalen Positionen einer verzerrten trigonalen Bipyramide [mittlerer Abstand Sb–O: 212,0(4) pm]. Aus den relativ kurzen Sb – O(=C)-Abständen [274,4(4) und 294,9(4) pm] und aus der Aufweitung des dem O(=C)-Atom nächsten äquatorialen C–Sb–C-Winkels auf 145,9(2)° [andere C-Sb-C-Winkel: 104,4(2), 109,5(2)°] wird auf schwache Sb–O(=C)-Koordination geschlossen. Schließlich wird eine Korrelation zwischen dem (+, –)I-Effekt des Organoliganden R an M (M = Sb, Bi) und der Stärke der M–O(=C)-Koordination in den Dicarboxylaten R₃M[O₂C(CH₂)_n–2-C₄H₃X]₂ vorgeschlagen. Triorganoanümony and Triorganobismuth Derivatives of Carbonic Acids of Five-membered Heterocycles. Crystal and Molecular Structure of (C₆H₅)₃Sb(O₂C–2-C₄H₃S)₂ Triorganoantimony- and triorganobismuth dicarboxylates R₃M[O₂C(CH₂)_n–2-C₄H₃X]₂ (M = Sb, R = CH₃, C₆H₁₁, C₆H₅, 4-CH₃OC₆H₄; M = Bi, R = C₆H₅, 4-CH₃C₆H₄; n = 0, X = O, S, NH, NCH₃. M = Sb, R = CH₃, C₆H₅; M = Bi, R = C₆H₅; n = 1, X = O, S. M = Sb, R = C₆H₁₁, n = 1, X = S; R = 4-FC₆H₄, n = 0, X = O, S, NCH₃; R = 2,4,6-(CH₃)₃C₆H₂, n = 0, X = O, S, NH) have been prepared by reaction of R₃Sb(OH)₂ (R = CH₃, C₆H₁₁; 2,4,6-(CH₃)₃C₆H₂), R₃SbO (R = C₆H₅, 4-CH₃OC₆H₄, 4-FC₆H₄) or R₃BiCO₃ with the appropriate five-membered heterocyclic carboxylic acid. From vibrational data for all compounds a trigonal bipyramidal environment around M (two O atoms of unidendate carboxylate ligands in apical, three C atoms (of R) in equatorial positions) is proposed and also an additional weak interaction of O(=C) of each carboxylate group and M. The crystal structure determination of Ph₃Sb(O₂C–2-C₄H₃S)₂ gives additional prove to this proposal. It crystallizes triclinic [space group P$1; a = 891.8(14), b = 1058.2(12), c = 1435.6(9) pm, α = 68.53(8), β = 85.47(9), γ = 85.99(11)°; Z = 2; d(calc.) = 1.607 Mg m^–3; V_cell = 1255.6 ų; structure determination from 3 947 independent reflexions (F_o > 3σ(F²_o)), R(unweighted) = 0.037]. Sb is bonding to three C₆H₅ groups in the equatorial plane [mean distance Sb–C: 211.1(5) pm] and two unidentate carboxylate ligands in the apical positions of a distorted trigonal bipyramid [mean distance Sb–O: 212.0(4) pm]. From the relatively short Sb–O(=C) distances [274.4(4) and 294.9(4) pm] and from the enlarged value of the equatorial C–Sb–C angle next to the O(=C) atom [145.9(2)°; other C–Sb–C angles: 104.4(2), 109.5(2)°] additional weak Sb–O(=C) coordination is inferred. Finally a correlation between the (+, –) I-effect of the organic ligands It at M and the strength of the M–O = C interaction is suggested.     

Zur Reaktivität von Disilylarsenido-Eisenkomplexen gegenüber Carbonsäurechloriden Die ersten Arsaalkenyl- und Diacylarsenidokomplexe. Röntgen-Strukturanalyse von Z-[(η5-C5H5)(CO)2Fe?AsC(OSiMe3)(t-Bu)]

On the Reactivity of Disilylarsenido Iron Complexes towards Carbonyl Chlorides: The First Arsaalkenyl- and Diacylarsenido Complexes. X-Ray Structure Analysis of Z-[(η⁵-C₅H₅)(CO)₂Fe? As?C(OSiMe₃)(t-Bu)] The reaction of equimolar amounts of (η⁵-C₅H₅)(CO)₂FeAs(SiMe₃)₂ ( 1a ) with the carbonyl chlorides RC(O)Cl (R = t-Bu, 2,4,6-Me₃C₆H₂ and 2,4,6-t-Bu₃C₆H₂) yields the arsaalkenyl complexes Z-[(η⁵-C₅H₅)(CO)₂Fe? As?;C(OSiMe₃)R ( 2–4 )]. The diacylarsenido complexes (η⁵-C₅H₅)(CO)₂Fe? As[C(O)R]₂ ( 5, 6 ) are generated by treatment of 1a with two equivalents of pivaloyl chloride or mesitoyl chloride, respectively. The As?C-double bond length of 2 (1.821(2) Å) was determined by single crystal x-ray analysis.     

New aryl ethynylene substituted silicon-centered molecules

The reactions of substituted dichlorosilane monomers,Cl₂SiRR′, with two equivalents of lithium aryl acetylide(1), LiC ≡ C-4-C₆H₄-Ph, afford RR′Si(C ≡ C-4-C₆H₄-Ph)₂ (6: R,R′ =CH₃; 7: R = CH₃, R′ = CH=CH₂; 8: R,R′ = Ph). An isomeric mixture of meso, (R,R)- and (S,S)-Bis[2-(N,N-dimethylaminomethyl)ferrocenyl]dichlorosilane (5) was used as starting chlorosilyl compound for reaction with LiC ≡ C-4-C₆H₄-Ph to give (FcN)₂Si(C ≡ C-4-C₆H₄-Ph)₂ (9). A detailedcharacterization of 6, 7, 8 and 9 has been carried out by ¹H-NMR, ¹³C-NMR, ²⁹Si-NMR, IR and UV-VIS spectroscopy. The crystal structure of 9 has been determined by X-ray diffraction analysis.     

Arylvanadin(III)-Verbindungen,III. Darstellung und Eigenschaften von Triarylvanadin-Verbindungen

Arylvanadium(III) Compounds. III. Preparation and Properties of Triaryl Vanadium Complexes The synthesis of triarylvanadium compounds, VR₃ (R = C₆H₅; 2,6-(CH₃)₂C₆H₃; 2,4,6-(CH₃)₃C₆H₂; (CH₃)₅C₆) is investigated. Only the compounds V[2,6-(CH₃)₂C₆H₃]₃ and V[2,4,6-(CH₃)₃C₆H₂]₃ (crystallized with tetrahydrofuran) are obtained. The complexes V(C₆H₅)(dipy)₂ · THF, V[2,4,6-(CH₃)₃C₆H₂]₃ · Do (Do = py, dipy) are described too.     

Two Novel CuII Phenanthroline Adipato Complexes with π‐π Stacking Interactions: [Cu(phen)2(C6H8O4)] · 4.5 H2O and [(Cu2(phen)2Cl2)(C6H8O4)] · 4 H2O

The blue copper complex compounds [Cu(phen)₂(C₆H₈O₄)] · 4.5 H₂O ( 1 ) and [(Cu₂(phen)₂Cl₂)(C₆H₈O₄)] · 4 H₂O ( 2 ) were synthesized from CuCl₂, 1,10‐phenanthroline (phen) and adipic acid in CH₃OH/H₂O solutions. [Cu(phen)₂‐ (C₆H₈O₄)] complexes and hydrogen bonded H₂O molecules form the crystal structure of ( 1 ) (P1 (no. 2), a = 10.086(2) Å, b = 11.470(2) Å, c = 16.523(3) Å, α = 99.80(1)°, β = 115.13(1)°, γ = 115.13(1)°, V = 1617.5(5) ų, Z = 2). The Cu atoms are square‐pyramidally coordinated by four N atoms of the phen ligands and one O atom of the adipate anion (d(Cu–O) = 1.989 Å, d(Cu–N) = 2.032–2.040 Å, axial d(Cu–N) = 2.235 Å). π‐π stacking interactions between phen ligands are responsible for the formation of supramolecular assemblies of [Cu(phen)₂(C₆H₈O₄)] complex molecules into 1 D chains along [111]. The crystal structure of ( 2 ) shows polymeric [(Cu₂(phen)₂Cl₂)(C₆H₈O₄)_2/2] chains (P1 (no. 2), a = 7.013(1) Å, b = 10.376(1) Å, c = 11.372(3) Å, α = 73.64(1)°, β = 78.15(2)°, γ = 81.44(1)°, V = 773.5(2) ų, Z = 1). The Cu atoms are fivefold coordinated by two Cl atoms, two N atoms of phen ligands and one O atom of the adipate anion, forming [CuCl₂N₂O] square pyramids with an axial Cl atom (d(Cu–O) = 1.958 Å, d(Cu–N) = 2.017–2.033 Å, d(Cu–Cl) = 2.281 Å; axial d(Cu–Cl) = 2.724 Å). Two square pyramids are condensed via the common Cl–Cl edge to centrosymmetric [Cu₂Cl₂N₄O₂] dimers, which are connected via the adipate anions to form the [(Cu₂(phen)₂Cl₂)(C₆H₈O₄)_2/2] chains. The supramolecular 3 D network results from π‐π stacking interactions between the chains. H₂O molecules are located in tunnels.