Vibrational (FT-IR and FT-Raman) and NMR studies on selected metal (Ca, Mn, Zn) complexes with ortho-, meta-, and para-iodobenzoic acids

The vibrational (FT-IR and FT-Raman) and NMR (¹H and ¹³C) spectra of Ca, Mn, and Zn complexes with ortho-, meta-, and para-iodobenzoic acids have been studied. The solid state samples of all complexes have been measured within the range 4000–400 cm⁻¹, while water solutions of ortho-iodobenzoates within the range 4000–800 cm⁻¹. Based on previous experimental data and normal mode calculations for simpler complexes the assignment of bands observed in vibrational spectra of studied compounds has been done. Some significant differences in vibrational structure (frequency and intensity of selected bands) have been observed and discussed. The effect of metal on ring vibrations and carboxylic anion stretching and deformation has been investigated. Also, influence of iodine substitution on the aromatic ring and carboxylic anion, depending on iodine ring position, has been discussed. In case of soluble compounds, wavenumbers of characteristic bands of water solution samples have been compared with wavenumbers of corresponding bands of solid state samples.     

E-2-benzylidenebenzocyclanones. II. IR and mass spectrometric investigations

A series of E-2-benzylideneindanones (a) -tetralones (b) and -benzosuberones (c) with OCH₃ (2–4), NO₂ (5–7) and F (8–10) substituents in ortho, meta or para position was studied by IR and mass spectrometry. The most important IR bands were assigned and stated correlations between some frequencies and the stereostructure or conjugation feature of the molecules investigated. IR spectra were also analyzed in order to find frequencies characteristic of the size of the alkanone ring. The mass spectrometric investigation aimed at determining fragmentation pathways and finding correlations between them and the ring size of the alkanone ring or the position of the substituents.     

Big macrocyclic assemblies of carboranes (big MACs): synthesis and crystal structure of a macrocyclic assembly of four carboranes containing alternate ortho- and meta-carborane icosahedra linked by para-phenylene units

The macrocyclic compound, [1,2-C₂B₁₀H₁₀-1,4-C₆H₄-1,7-C₂B₁₀H₁₀-1,4-C₆H₄]₂ (5)—a novel cyclooctaphane, was prepared by condensation of the C,C′-dicopper(I) derivative of meta-carborane with 1,2-bis(4-iodophenyl)-ortho-carborane. The X-ray crystal structure of 5·C₆H₆·6C₆H₁₂ was determined at 150 K, revealing an extremely loose packing mode. Molecule 5 has a crystallographic C_s and local C_2v symmetry; the macrocycle adopts a butterfly (dihedral angle 143°) conformation with the ortho-carborane units at the wingtips and the phenylene ring planes roughly perpendicular to the wing planes. Multinuclear NMR spectra suggest that molecule 5 in solution inverts rapidly via the planar D_2h geometry, which (from ab initio HF/6-31G* calculations) is only 1 kcal mol⁻¹ higher in energy than the C_2v one. An attempt to prepare an even larger macrocycle, comprising three para-carborane and three ortho-carborane units linked by six para-phenylene units, was unsuccessful.     

Reactions of biscyclopentadienylnickel with lithium and magnesium aryls

The reaction of nickelocene with phenyllithium, ortho-, meta- and para-methylphenylmagnesium bromide, and 2-((dimethylamino)methyl) phenyllithium are studied. It was found that unstable compounds {CpNiC₆H₄R} (R = H, o-, m-, p-CH₃) are formed in those reactions. For R = CH₂N(CH₃)₂, a stable compound, CpNiC₆H₄CH₂N(CH₃)₂, is formed due to intramolecular coordination. In other cases, mainly coupling reactions occur and biphenyl, bitolyl and higher coupling products are formed. Compound (CpNiC₆H₄R) is also formed as a product of thermal decomposition of Cp{η²⁻ C₂H₄)NiC₆H₄R. It reacts further to form the same products as above. The mechanism of the coupling reactions is proposed and discussed.     

Substituent position effect on the properties of new unsymmetrical isomeric diarylethenes having a chlorine atom

Three new unsymmetrical photochromic diarylethenes bearing a chlorine atom at para-, meta- and ortho-position of one terminal benzene ring, namely {1-(2-methyl-5-phenyl-3-thienyl)-2-[2-methyl-5-(4-chlorophenyl)-3-thienyl]}perfluorocyclopentene (para 1o), {1-(2-methyl-5-phenyl-3-thienyl)-2-[2-methyl-5-(3-chlorophenyl)-3-thienyl]}perfluorocyclopentene (meta 2o), and {1-(2-methyl-5-phenyl-3-thienyl)-2-[2-methyl-5-(2-chlorophenyl) -3-thienyl]}perfluorocyclopentene (ortho 3o), have been synthesized. The substituent position effect on their properties, including photochromism, fluorescence both in solution and in PMMA amorphous film and their electrochemical properties were investigated in detail. The results elucidated that the chlorine atom and its substituent position had a remarkable effect on the absorption characteristics, photochromic reactivity, fluorescence, as well as the electrochemical performances of these diarylethene compounds. For diarylethenes 1, 2 and 3, the cycloreversion quantum yields were gradually increased when the chlorine atom was attached to the para-, meta- and ortho-positions of the one terminal benzene rings; but their molar absorption coefficients both of their open-ring and closed-ring isomers were remarkably decreased. The fluorescent properties of para-substituted diarylethene embedded in poly(methyl methacylate) (PMMA) amorphous film showed good fluorescent switches (quenched to 28%). Furthermore, the cyclic voltammograms experiments elucidated that the electrochemical properties of these diarylethene derivatives were also remarkably dependent on the chlorine atom position effect, which may be attributed to the different electron-inducing ability and steric effect when the chlorine atom was substituted on the different position of the terminal benzene ring.     

A rationalization of orientation and reactivity in the nucleophilic replacement reactions of aromatic polyhalo-compounds

C₆F₅X compounds react with nucleophiles at the position para to X in some cases (X = H, CH₃, NMe₂, SMe, CF₃), meta in others (X = NH₂, O⁻) and occasionally at both meta and para in comparable amounts (X = OMe, NHME); significant amounts of ortho-replacement also occur (X = Cl, OMe). These orientations, and those in polychloro-aromatics and polyfluoro-polynuclear aromatics, can be rationalized by considering the relative stabilities of the Wheland-type intermediates involved (I, II, III), provided the halogens are taken as electron-repelling in π-systems. Reactivities can be rationalized if ground state stabilities are considered as well. A number of predictions have been made on the basis of these arguments.     

Kinetische und mechanistische untersuchungen von übergangsmetallkomplex-reaktionen : IX. Substitution von CO durch PPh3 in aminocarbinkomplexen: Präparative und kinetische untersuchungen

Pentacarbonyl(diethylaminocarbyne)chromium tetrafluoroborate, [(CO)₅₋ CrCNEt₂]BF₄ (I), reacts with PPh₃ with substitution of CO and formation of trans-tetracarbonyl(diethylaminocarbyne)triphenylphosphanechromium tetra-fluoroborate, trans-[PPh₃(CO)₄CrCNEt₂]BF₄ (III). Substitution of CO by PPh₃ in neutral trans-tetracarbonyl(halo)(diethylaminocarbyne)chromium complexes, trans-X(CO)₄CrCNEt₂ (IVa: X = Br, IVb: X = I), leads in a reversible reaction to the corresponding tricarbonyl complexes, mer-X(PPh₃)(CO)₃₋ CrNEt₂ (V), PPh₃ occupying the cis-position to the carbyne ligand. With PPh₃ in large excess both reactions follow a first-order rate law. This as well as the activation parameters (ΔH≠ = 104–113 kJ mol⁻¹, ΔS≠ = 64–71 J mol⁻¹ K⁻¹) indicate a dissociative mechanism.     

A study of ortho- and para-siloxyanilines for the synthesis of mono-, bi-, and tetra-nuclear early transition metal–imido complexes

The siloxyanilines o-Me₃SiOC₆H₄NH₂ (1) and p-RMe₂SiOC₆H₄NH₂ (R=H (2); R=Me (3)), and their N-silylated derivatives p-Me₃SiOC₆H₄NHSiMe₃ (4) and p-Me₃SiOC₆H₄N(SiMe₃)₂ (5) have been prepared from ortho- or para-aminophenol and used in the synthesis of imido complexes. Thus, binuclear [{Ti(η⁵-C₅H₅)Cl}{μ-NC₆H₄(p-OSiMe₃)}]₂ (6) and mononuclear [TiCl₂{NC₆H₄(p-OSiMe₃)}(py)₃] (7) imido complexes have been obtained from the reaction of 3 and [Ti(η⁵-C₅H₅)Cl₃] or [TiCl₂(N^tBu)(py)₃], respectively. In contrast, the reaction of 1 with TiCl₄ and ^tBupy affords the titanocycle [TiCl₂{OC₆H₄(o-NH)---N,O}(^tBupy)₂] (8). Compound 5 has also been used to prepare the niobium imide complex [NbCl₃{NC₆H₄(p-OSiMe₃)}(MeCN)₂] (9), by its reaction with NbCl₅ in CH₃CN. These findings have been applied to the synthesis of polynuclear systems. Thus, chlorocarbosilane Si[CH₂CH₂CH₂Si(Me)₂Cl]₄ (CS–Cl) has been functionalized with the ortho- and para-aminophenoxy groups to give 10 and 11, respectively. The use of 11 has allowed the formation of the tetranuclear compound 12. Attempts to synthesize terminal imido titanium complexes from 10 and TiCl₄ in the presence of ^tBupy and Et₃N, give complex 8 and carbosilane CS–Cl.     

Cis- and trans-3-hexene: infrared spectrum in liquid argon solution, ab initio calculations of equilibrium geometry, normal coordinate analysis, and vibrational assignments

The infrared spectra of cis-3-hexene and trans-3-hexene dissolved in liquid argon have been obtained at temperatures from 93 to 120 K. The absorptions were observed with a low-temperature cell and a Fourier transform infrared spectrophotometer. Ab initio molecular orbital calculations were performed to obtain the equilibrium geometry, vibrational frequencies, force fields, and infrared intensities. The calculations were done at the Hartree-Fock level using 6-31G basis set. The Cartesian force fields from ab initio calculations have been converted to the force field in symmetry coordinates. The scale factors of ab initio calculated force fields were determined. Normal coordinate calculations were performed using a scaled quantum mechanical (SQM) force field. Vibrational normal modes calculated for the lowest energy rotamers of cis- and trans-3-hexene have been assigned to infrared absorption bands observed in liquid argon solution. The assignments were based on calculated frequencies and potential energy distributions. The equilibrium geometries of the two lowest energy rotamers (symmetry C₂ and C_s) of cis-3-hexene and of the three lowest energy rotamers (symmetry C_i, C₂, and C₁) of trans-3-hexene were calculated. Variable temperature studies of the infrared spectrum of cis- and trans-3-hexenes dissolved in liquid argon were done to obtain the ΔH of conversion between the rotamers C₂ and C_s of cis-3-hexene and between the rotamers C_i, C₂, and C₁ of trans-3-hexene.     

On the positronium spin conversion reactions caused by some macrocyclic Co complexes

The rate constants, k_CR, of ortho- into para-positronium (o-Ps→p-Ps) spin conversion reactions, CR, caused by the high-spin [Co^IIsep]²⁺, [Co^IIdinosar]²⁺ and [Co^IIdiamsar]²⁺ macrocyclic complexes and also by high-spin [Co^II sen]²⁺ tripod complex were measured at several temperatures. The delocalizations, β, of Co^II unpaired electrons, promoted by the mentioned ligands, were determined by using the previously established correlations between k_CR and the electron delocalization β of unpaired metal electrons. β is given by the ratio between the Racah inter-electronic repulsion parameters of complexes, B, and that of the free ions, B₀. The β values are compared with those of the Co^II complexes with en (1,2-ethanediamine), pn (1,2 propanediamine) and dien (2,2′ diamino diethylamine) ligands. The k_CR rate constants are also compared with those of the Ps oxidation reactions, OR, promoted by the corresponding Co^III complexes. It is concluded that, unlike OR's, the CR's do not occur by formation of hepta-coordinate adducts with Ps atoms.     

The stability of columns comprising alternating triphenylene and hexaphenyltriphenylene molecules: variations in the structure of the hexaphenyltriphenylene component

Previous investigations of complementary polytopic interaction (CPI) columnar mesophases, in which the columns are built up of alternating hexaalkoxytriphenylene (HAT) and hexaphenyltriphenylene (PTP) molecules, concentrated mainly on the effect of variations in the structure of the HAT component. This investigation is concerned with the effect of variations in the structure of the PTP component and, in particular, variations in the position of an alkoxy side chain in the phenyl ring. Stable columnar mesophases are obtained when a hexyloxy substituent is placed in the meta- or para-position but not in the ortho-position. In the case of the meta- and para-substituted systems, the two-component CPI columnar phases are stable over a considerably larger temperature range than the one-component HAT systems. The evidence suggests that unfavourable PTP/PTP stacking is as much a driving force for the formation of these mixed stacks as is favourable PTP/HAT stacking, but both need to be explained in terms of the sum of atomically dispersed van der Waals and coulombic interactions. On cooling from the isotropic into the Col_h phase, the columnar phase based on a 1:1 mixture of hexakis(hexyloxy)tripenylene and the meta-hexyloxy-substituted PTP gives an unusual texture consisting of 'viking-axe'-shaped structures.     

Electron interactions in the closo-carboranes 1,2- and 1,7-C2B10H12

Ultra-soft X-ray fluorescence spectra of ortho- and meta-carborane C₂B₁₀H₁₂ were obtained. Ab initio self-consistent field (SCF) quantum-chemical calculations of these molecules were performed to interpret BK and CK spectra. Distinctions between electronic structure of closo-carboranes 1,2- and 1,7-C₂B₁₀H₁₂ are caused by different efficiency in the interaction of carbon and boron atoms. Location of boron atom between carbon atoms leads to stronger delocalization of electron density in meta-carborane molecule. The correlation between molecular orbitals (MOs) of the anion B₁₂H₁₂²⁻ and the closo-carboranes was carried out.     

Thermal decomposition study on mixed ligand thymine complexes of divalent nickel(II) with dianions of some dicarboxylic acids

Thermal decomposition of mixed ligand thymine (2,4-dihydroxy-5-methylpyrimidine) complexes of divalent Ni(II) with aspartate, glutamate and ADA (N-2-acetamido)iminodiacetate dianions was monitored by TG, DTG and DTA analysis in static atmosphere of air. The decomposition course and steps of complexes [Ni(C₅H₆N₂O₂)(C₄H₅NO₄)²⁻(H₂O)₂]·H₂O, [Ni(C₅H₆N₂O₂)(C₅H₇NO₄)²⁻(H₂O)₂]·H₂O and [Ni(C₅H₆N₂O₂)(C₆H₈N₂O₅)²⁻(H₂O)₂]·1.5H₂O were analyzed. The final decomposition products are found to be the corresponding metal oxides. The kinetic parameters namely, activation energy (E*), enthalpy (ΔH*), entropy (ΔS*) and free energy change of decomposition (ΔG*) are calculated from the TG curves using Coats–Redfern and Horowitz–Metzger equations. The stability order found for these complexes follows the trend aspartate > ADA > glutamate.     

Structures and energetics of C3H6S isomers: a Gaussian-3 ab initio study

Twenty-two isomers/conformers of C₃H₆S^+√ radical cations have been identified and their heats of formation (ΔH_f) at 0 and 298 K have been calculated using the Gaussian-3 (G3) method. Seven of these isomers are known and their ΔH_f data are available in the literature for comparison. The least energy isomer is found to be the thioacetone radical cation (4⁺) with C_2v symmetry. In contrast, the least energy C₃H₆O^+√ isomer is the 1-propen-2-ol radical cation. The G3 ΔH_f298 of 4⁺ is calculated to be 859.4 kJ mol⁻¹, ca. 38 kJ mol⁻¹ higher than the literature value, ≤821 kJ mol⁻¹. For allyl mercaptan radical cation (7⁺), the G3 ΔH_f298 is calculated to be 927.8 kJ mol⁻¹, also not in good agreement with the experimental estimate, 956 kJ mol⁻¹. Upon examining the experimental data and carrying out further calculations, it is shown that the G3 ΔH_f298 values for 4⁺ and 7⁺ should be more reliable than the compiled values. For the five remaining cations with available experimental thermal data, the agreement between the experimental and G3 results ranges from fair to excellent.

Cation CH₃CHSCH₂^+√ (10⁺) has the least energy among the eleven distonic radical cations identified. Their ΔH_f298 values range from 918 to 1151 kJ mol⁻¹. Nevertheless, only one of them, CH₂=SCH₂CH₂^+√ (12⁺), has been observed. Its G3 ΔH_f298 value is 980.9 kJ mol⁻¹, in fair agreement with the experimental result, 990 kJ mol⁻¹.

A couple of reactions involving C₃H₆S^+√ isomers CH₂=SCH₂CH₂^+√ (12⁺) and trimethylene sulfide radical cation (13⁺) have also been studied with the G3 method and the results are consistent with experimental findings.     

Surface activity and thermodynamic of micellization and adsorption for isooctylphenol ethoxylates, phosphate esters and their mixtures with N-diethoxylated perfluorooctanamide

Three nonionic surfactants; p-isooctylphenol ethoxylates p-[i-OPE10], p-[i-OPE15], and p-[i-OPE20], were phosphorylated to produce three anionic phosphate ester surfactants. In addition, N-diethoxylated perfluorooctanamide (N-DEFOA) was also prepared. The surface and thermodynamic properties of the three types of surfactants and mixtures of the fluorocarbon surfactant (FC) with the hydrocarbon surfactants (HC) have been investigated. Surface tension as a function of concentration of the surfactant in aqueous solution was measured at 30, 40, 50 and 60°C, using the spinning drop technique. From these measurements the critical micelle concentration (CMC), the surface tension at the CMC (γ_CMC), the maximum surface excess concentration (Γ_max), the minimum area per molecule at the aqueous solution/air interface (A_min), and the effectiveness of surface tension reduction (π_CMC), were calculated. The thermodynamic parameters of micellization (ΔG_mic, ΔH_mic, ΔS_mic) and of adsorption (ΔG_ad, ΔH_ad, ΔS_ad) for these surfactants and their mixtures were also calculated. Structural effects on micellization, adsorption and effectiveness of surface tension reduction are discussed in terms of these parameters. The results show that the FC surfactant and its mixtures with HC surfactants enhance the efficiency in surface tension reduction and adsorption in the mixed monolayer at the aqueous solution/air interface, and also, reduce γ_CMC and the tendency towards micellization.     

Raman spectroscopic characterization of high temperature MGaCl8 (M = Nb, Ta) dinuclear molecular complexes in the liquid and gaseous state

Raman spectra were obtained at temperatures 375–650 K and pressures up to 4 atm from GaCl₃-NbCl₅ and GaCl₃-TaCl₅ binary mixtures in the liquid and vapour state. The data indicate formation of NbGaCl₈ and TaGaCl₈ liquid and vapour dinuclear addition complexes. The spectra were interpreted in terms of a C_2ν configuration for the MGaCl₈ (M = Nb, Ta) molecules consisting of a MCl₆ octahedron sharing an edge with a GaCl₄ tetrahedron. A comparison of the spectral features of 1 : 1 GaCl₃-NbCl₅ and GaCl₃-TaCl₅ molten mixtures with the spectra of the corresponding polycrystalline samples indicates that the proposed identity for the complexes is maintained in all three phases. The NbGaCl₈ and TaGaCl₈ complexes exist in the liquid state in a wide temperature range beyond their melting points (125 and 150°C, respectively) and are shown to undergo dissociation to their components [Nb₂Cl₁₀(1)/NbCl₅(1), Ga₂Cl₆(1) and Ta₂Cl₁₀(1)/TaCl₅(1)] with increasing temperature. Both complex molecules are identified in the gaseous state in low percentages among the vapours of their components and are almost totally decomposed at temperatures higher than ca 325°C. The enthalpy of the reaction TaCl₅(g) +1/2Ga₂Cl₆(g) TaGaCl₈(g) was determined from accurate relative Raman intensity measurements as ΔH⁰ = −38±2 kJ mol⁻¹.     

Diastereoisomer separation and absolute configuration of (ortho- and (meta-MeC6H4CO2Me)Cr(CO)2L (L = (+)-neomenthyl-PPh2)

Replacement of a carbonyl ligand by (+)-neomenthylPPh₂ provides a method for diastereoisomer separation of the methyl esters of (ortho- and (para-toluic acid)Cr(CO)₃. The absolute planar configuration have been assigned.     

Formation of cobalt, nickel and copper complexes with murexide in ethanol-water mixtures

The complexation reactions between murexide and Co²⁺, Ni²⁺ and Cu²⁺ in C₂H₅OH-H₂O mixtures have been investigated spectrophotometrically. The formation constants of the 1:1 complexes formed increase in the order Co²⁺ < Ni²⁺ < Cu²⁺ for all solvent mixtures studied, and log K_f is a linear function of the mole fraction of ethanol. The heat of complexation was determined calorimetrically for the nickel and copper complexes. The values of ΔH° and ΔS° are solvent-dependent, and all three complexes have negative ΔH° and positive ΔS° values.     

Strong antiferromagnetism in the dinuclear 2-pyridone complex with N–C–O bridges: A paddle-wheel analogue of the dinuclear tetracarboxylates

A novel dinuclear complex [Cu₂(μ-L)₄(HL)₂] (1) was isolated from starting 2-pyridone (HL) via a resonance and a tautomeric transformation. Each copper centre is in a square-pyramidal coordination sphere, defined by two oxygen atoms (Cu–O4 1.978(5), Cu–O11 1.964(4) Å) and two nitrogen atoms (Cu–N2 2.003(5), Cu–N3 2.007(5) Å) of four bridging deprotonated pyridin-2-olates and an oxygen atom on the top from a neutral 2-pyridone (Cu–O2 2.227(5) Å), analogous to tetracarboxylate paddle-wheel complexes. Compound 1 was compared with mixed pyridin-2-olato/methanoato analogues [Cu₂(μ-HCO₂)₂(μ-L)₂(HL)₂] · 2CH₃CN (2) and [Cu₂(μ-HCO₂)₂(μ-L)₂(HL)₂] (2a) (2a is an air stable form obtained from 2 outside mother-liquid). The EPR spectra of air stable 1 and 2a show three signals H_z1, H₂ and H_z2, typical for the binuclear systems with spin S = 1, both revealing strong antiferromagnetism 2J = −334 (1) and −324 cm⁻¹ (2a). Interestingly, only for 1 additional H₁ signal at 100 mT is noticed (D(1) = 0.293 cm⁻¹ < hν = 0.320 cm⁻¹ < D(2a) = 0.347 cm⁻¹). On the other hand, several broad signals in the 100–450 mT region, only in the high temperature spectrum for 2a are observed. These results are in agreement with the magnetic susceptibility analysis.