Towards a Molecular Understanding of Cation–Anion Interactions—Probing the Electronic Structure of Imidazolium Ionic Liquids by NMR Spectroscopy,X‐ray Photoelectron Spectroscopy and Theoretical Calculations

Ten [C₈C₁Im]⁺ (1‐methyl‐3‐octylimidazolium)‐based ionic liquids with anions Cl^?, Br^?, I^?, [NO₃]^?, [BF₄]^?, [TfO]^?, [PF₆]^?, [Tf₂N]^?, [Pf₂N]^?, and [FAP]^? (TfO=trifluoromethylsulfonate, Tf₂N=bis(trifluoromethylsulfonyl)imide, Pf₂N=bis(pentafluoroethylsulfonyl)imide, FAP=tris(pentafluoroethyl)trifluorophosphate) and two [C₈C₁C₁Im]⁺ (1,2‐dimethyl‐3‐octylimidazolium)‐based ionic liquids with anions Br^? and [Tf₂N]^? were investigated by using X‐ray photoelectron spectroscopy (XPS), NMR spectroscopy and theoretical calculations. While ¹H NMR spectroscopy is found to probe very specifically the strongest hydrogen‐bond interaction between the hydrogen attached to the C² position and the anion, a comparative XPS study provides first direct experimental evidence for cation–anion charge‐transfer phenomena in ionic liquids as a function of the ionic liquid’s anion. These charge‐transfer effects are found to be surprisingly similar for [C₈C₁Im]⁺ and [C₈C₁C₁Im]⁺ salts of the same anion, which in combination with theoretical calculations leads to the conclusion that hydrogen bonding and charge transfer occur independently from each other, but are both more pronounced for small and more strongly coordinating anions, and are greatly reduced in the case of large and weakly coordinating anions.     

Microscopic Diffusion Dynamics of Silver Complex‐Based Room‐Temperature Ionic Liquids Probed by Quasielastic Neutron Scattering

Quasielastic neutron scattering is used to probe the microscopic diffusion dynamics of the hydrogen‐bearing cations of two different silver complex‐derived room‐temperature ionic liquids, [Ag(propylamine)₂⁺][Tf₂N^?] (Tf=trifluoromethanesulfonyl) and [Ag(1‐pentene)⁺][Tf₂N^?]. In the temperature range from 300 to 340 K, analysis of the scattering momentum transfer dependence of the data provides evidence for three distinct diffusion components. The slowest component describes the long‐range cationic translational diffusion. A possible link between the microscopic diffusion parameters and the structural features of the cations comprising these two ionic liquids is discussed.     

Mass Distribution and Diffusion of [1‐Butyl‐3‐methylimidazolium][Y] Ionic Liquids Adsorbed on the Graphite Surface at 300–800 K

The structure and diffusion behavior of 1‐butyl‐3‐methylimidazolium ([bmim]⁺) ionic liquids with [Cl]^?, [PF₆]^?, and [Tf₂N]^? counterions near a hydrophobic graphite surface are investigated by molecular dynamics simulation over the temperature range of 300–800 K. Near the graphite surface the structure of the ionic liquid differs from that in the bulk and it forms a well‐ordered region extending over 30 Å from the surface. The bottom layer of the ionic liquid is stable over the investigated temperature range due to the inherent slow dynamics of the ionic liquid and the strong Coulombic interactions between cation and anion. In the bottom layer, diffusion is strongly anisotropic and predominantly occurs along the graphite surface. Diffusion perpendicular to the interface (interfacial mass transfer rate k_t) is very slow due to strong ion–substrate interaction. The diffusion behaviors of the three ionic liquids in the two directions all follow an Arrhenius relation, and the activation barrier increases with decreasing anion size. Such an Arrhenius relation is applied to surface‐adsorbed ionic liquids for the first time. The ion size and the surface electrical charge density of the anions are the major factors determining the diffusion behavior of the ionic liquid adjacent to the graphite surface.     

Water in Ionic Liquids: Correlation between Anion Hydrophilicity and Near‐Infrared Fingerprints

We show that fingerprints of the different states of water association can be clearly distinguished in the range of the first overtone of water′s symmetric O‐H stretching in the spectra of water‐saturated [EMIm]⁺‐based ionic liquids with anions of substantially different hydrophilicity, such as hydrophobic [(CF₃SO₂)₂N]^?, moderately hydrophilic [CF₃SO₃]^?, and highly hydrophilic [HSO₄]^?.     

Raman and FTIR Spectroscopic Studies of 1‐Ethyl‐3‐methylimidazolium Trifluoromethylsulfonate,its Mixtures with Water and the Solvation of Zinc Ions

In this paper we report on the interactions of the ionic liquid 1‐ethyl‐3‐methylimidazolium trifluoromethylsulfonate ([EMIm]TfO) with water and the solvation of zinc ions in neat [EMIm]TfO and [EMIm]TfO–water mixtures investigated by FTIR and Raman spectroscopy. The structures and physicochemical properties of the [EMIm]TfO–water mixtures are strongly dependent on the interaction between cations, anions, and water. The structure was changed from ionic‐liquid‐like to water‐like solutions upon addition of water. In addition, zinc salts can precipitate in 0.2 M Zn(TfO)₂/[EMIm]TfO upon addition of 10 % (v/v) water, presumably as a result of polarity change of the solution. The average coordination number of TfO^? per zinc ion calculated from Raman spectra is 3.8 in neat [EMIm]TfO, indicating that [Zn(TfO)₄]^2?, and [Zn(TfO)₃]^? complexes are present in the solution. However, in the presence of water, water interacts preferentially with the zinc ions, leading to aqueous zinc species. The solvation of zinc ions in 1‐butyl‐1‐methylpyrrolidinium trifluoromethylsulfonate ([Py_1,4]TfO) was also investigated. In [Py_1,4]TfO, there are, on average, 4.5 TfO^? anions coordinating each zinc ion, corresponding to the weak interaction between [Py_1,4]⁺ cations and TfO^? anions. The species present in [Py_1,4]TfO are likely a mixture of [Zn(TfO)₄]^2? and [Zn(TfO)₅]^3?.     

DFT Study of the Geometrical and Electronic Structures of Geminal Dicationic Ionic Liquids 1,3‐Bis[3‐methylimidazolium‐1‐yl]hexane Halides

In this work, the geometrical and electronic properties of the mono cationic ionic liquid 1‐hexyl‐3‐methylimidazolium halides ([C₆(mim)]⁺_X^?, X=Cl, Br and I) and dicationic ionic liquid 1,3‐bis[3‐methylimidazolium‐1‐yl]hexane halides ([C₆(mim)₂X₂], X=Cl, Br and I) were studied using the density functional theory (DFT). The most stable conformer of these two types ionic liquids (IL) are determined and compared with each other. Results show that in the most stable conformers, in both monocationic ILs and dicationic ILs, the Cl^? and Br^? anions prefer to locate almost in the plane of the imidazolium ring whereas the I^? anion prefers nearly vertical location respect to the imidazolium ring plan. Comparison of hydrogen bonding and ionic interactions in these two types of ionic liquids reveals that these ionic liquids can be formed hydrogen bond by Cl^? and Br^? anion. The calculated thermodynamic functions show that the interaction of cation — anion pair in the dicationic ionic liquids are more than monocationic ionic liquids and these interactions decrease with increasing the halide anion atomic weight.     

Novel Cyclic Sulfonium‐Based Ionic Liquids: Synthesis,Characterization, and Physicochemical Properties

A new series of ionic liquids composed of three cyclic sulfonium cations and four anions has been synthesized and characterized. Their physicochemical properties, including their spectroscopic characteristics, ion cluster behavior, surface properties, phase transitions, thermal stability, density, viscosity, refractive index, tribological properties, ion conductivity, and electrochemical window have been comprehensively studied. Eight of these salts are liquids at room temperature, at which some salts based on [NO₃]^? and [NTf₂]^? ions exhibit organic plastic crystal behaviors, and all the saccharin‐based salts display relatively high refractive indices (1.442–1.594). In addition, some ionic liquids with the [NTf₂]^? ion exhibit peculiar spectroscopic characteristics in FTIR and UV/Vis regions, whilst those salts based on the [DCA]^? ion show lower viscosities (34.2–62.6 mPa s at 20 °C) and much higher conductivities (7.6–17.6 mS cm^?1 at 20 °C) than most traditional 1,3‐dialkylimidazolium salts.     

[Bis(imidazolyl)–BH2]+[Bis(triazolyl)–BH2]− Ionic Liquids with High Density and Energy Capacity

[Bis(imidazolyl)–BH₂]⁺[bis(triazolyl)–BH₂]^? and [bis(imidazolyl)–BH₂]⁺[tris(triazolyl)–BH]^? were synthesized, the cations and anions of which were functionalized with B?H groups and azoles. As B?H groups contribute to the hypergolic activity and azole groups improve the energy output, the resulting ionic liquids exhibited ignition delay times as low as 20 ms and energy outputs as high as 461.1 kJ mol^?1. In addition, densities (1.07–1.22 g cm^?3) and density‐specific impulse (≈360 s g cm^?3) values reached a relatively high level. These ionic liquids show great promise as sustainable rocket fuels.     

Coordination environment of [UO2Br4] in ionic liquids and crystal structure of [Bmim]2[UO2Br4]

The complex formed by the reaction of the uranyl ion, UO₂²⁺, with bromide ions in the ionic liquids 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Bmim][Tf₂N]) and methyl-tributylammonium bis(trifluoromethylsulfonyl)imide ([MeBu₃N][Tf₂N]) has been investigated by UV–Vis and U L_III-edge EXAFS spectroscopy and compared to the crystal structure of [Bmim]₂[UO₂Br₄]. The solid state reveals a classical tetragonal bipyramid geometry for [UO₂Br₄]²⁻ with hydrogen bonds between the Bmim⁺ and the coordinated bromides. The UV–Vis spectroscopy reveals the quantitative formation of [UO₂Br₄]²⁻ when a stoichiometric amount of bromide ions is added to UO₂(CF₃SO₃)₂ in both Tf₂N-based ionic liquids. The absorption spectrum also suggests a D_4h symmetry for [UO₂Br₄]²⁻ in ionic liquids, as previously observed for the [UO₂Cl₄]²⁻ congener. EXAFS analysis supports this conclusion and demonstrates that the [UO₂Br₄]²⁻ coordination polyhedron is maintained in the ionic liquids without any coordinating solvent or water molecules. The mean U–O and U–Br distances in the solutions, determined by EXAFS, are, respectively, 1.766(2) and 2.821(2) Å in [Bmim][Tf₂N], and, respectively, 1.768(2) and 2.827(2) Å, in [MeBu₃N][Tf₂N]. Similar results are obtained in both ionic liquids indicating no significant influence of the ionic liquid cation either on the complexation reaction or on the structure of the uranyl species.     

Physical Vapor Deposition of [EMIM][Tf2N]: A New Approach to the Modification of Surface Properties with Ultrathin Ionic Liquid Films

Ultrathin films of the ionic liquid (IL) 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMIM][Tf₂N], are prepared on a glass substrate by means of an in situ thermal‐evaporation/condensation process under ultrahigh‐vacuum conditions. By using X‐ray photoelectron spectroscopy (XPS), it is demonstrated that the first layer of the IL film grows two dimensionally, followed by the three‐dimensional growth of successive layers. The first molecular layer consists of a bilayer, with the [EMIM]⁺ cations in contact to the surface and the [Tf₂N]^? anions at the vacuum side. The ultrathin IL films are found to be stable under ambient conditions.     

Speciation of Rare‐Earth Metal Complexes in Ionic Liquids: A Multiple‐Technique Approach

The dissolution process of metal complexes in ionic liquids was investigated by a multiple‐technique approach to reveal the solvate species of the metal in solution. The task‐specific ionic liquid betainium bis(trifluoromethylsulfonyl)imide ([Hbet][Tf₂N]) is able to dissolve stoichiometric amounts of the oxides of the rare‐earth elements. The crystal structures of the compounds [Eu₂(bet)₈(H₂O)₄][Tf₂N]₆, [Eu₂(bet)₈(H₂O)₂][Tf₂N]₆?2H₂O, and [Y₂(bet)₆(H₂O)₄][Tf₂N]₆ were found to consist of dimers. These rare‐earth complexes are well soluble in the ionic liquids [Hbet][Tf₂N] and [C₄mim][Tf₂N] (C₄mim=1‐butyl‐3‐methylimidazolium). The speciation of the metal complexes after dissolution in these ionic liquids was investigated by luminescence spectroscopy, ¹H, ¹³C, and ⁸⁹Y NMR spectroscopy, and by the synchrotron techniques EXAFS (extended X‐ray absorption fine structure) and HEXS (high‐energy X‐ray scattering). The combination of these complementary analytical techniques reveals that the cationic dimers decompose into monomers after dissolution of the complexes in the ionic liquids. Deeper insight into the solution processes of metal compounds is desirable for applications of ionic liquids in the field of electrochemistry, catalysis, and materials chemistry.     

Ionic Association of the Ionic Liquids [C4mim][BF4], [C4mim][PF6], and [Cnmim]Br in Molecular Solvents

Considering the ionic nature of ionic liquids (ILs), ionic association is expected to be essential in solutions of ILs and to have an important influence on their applications. Although numerous studies have been reported for the ionic association behavior of ILs in solution, quantitative results are quite scarce. Herein, the conductivities of the ILs [C_nmim]Br (n=4, 6, 8, 10, 12), [C₄mim][BF₄], and [C₄mim][PF₆] in various molecular solvents (water, methanol, 1‐propanol, 1‐pentanol, acetonitrile, and acetone) are determined at 298.15 K as a function of IL concentration. The conductance data are analyzed by the Lee–Wheaton conductivity equation in terms of the ionic association constant (K_A) and the limiting molar conductance (Λ_m⁰). Combined with the values for the Br^? anion reported in the literature, the limiting molar conductivities and the transference numbers of the cations and [BF₄]^? and [PF₆]^? anions are calculated in the molecular solvents. It is shown that the alkyl chain length of the cations and type of anion affect the ionic association constants and limiting molar conductivities of the ILs. For a given anion (Br^?), the Λ_m⁰ values decrease with increasing alkyl chain length of the cations in all the molecular solvents, whereas the K_A values of the ILs decrease in organic solvents but increase in water as the alkyl chain length of the cations increases. For the [C₄mim]⁺ cation, the limiting molar conductivities of the ILs decrease in the order Br^?>[BF₄]^?>[PF₆]^?, and their ionic association constants follow the order [BF₄]^?>[PF₆]^?>Br^? in water, acetone, and acetonitrile. Furthermore, and similar to the classical electrolytes, a linear relationship is observed between ln K_A of the ILs and the reciprocal of the dielectric constants of the molecular solvents. The ILs are solvated to a different extent by the molecular solvents, and ionic association is affected significantly by ionic solvation. This information is expected to be useful for the modulation of the IL conductance by the alkyl chain length of the cations, type of anion, and physical properties of the molecular solvents.     

Room-Temperature Synthesis of the Bi5[GaCl4]3 Salt From Three Different Classes of Ionic Liquids

Following the development in the synthesis of subvalent cluster compounds, we report on the use of three different classes of room-temperature ionic liquids for the synthesis of the pentabismuth-tris(tetragallate) salt, Bi₅[GaCl₄]₃, characterized by X-ray diffraction. The Bi₅[GaCl₄]₃ salt was prepared by reduction of BiCl₃ using gallium metal in ionic liquid reaction media containing a strong Lewis acid, GaCl₃. The ionic liquids; trihexyltetradecyl phosphonium chloride [Th-Td-P⁺]Cl^?, 1-dodecyl-3-methylimidazolium chloride [Dod-Me-Im⁺]Cl^? and N-butyl-N-methylpyrrolidinium chloride [Bu-Me-Pyrr⁺]Cl^? from three of the main classes of ionic liquids were used in synthesis. Reactions using ionic liquids composed of the trihexyltetradecyl phosphonium cation [Th-Td-P⁺] and the anions; tetrafluoroborate [BF₄ ^?], bis(trifluoro-methyl sulfonyl) imide [(Tf)₂N^?] and hexafluorophosphate [PF₆ ^?] were also investigated.     

Synthesis and Properties of Alkoxy‐ and Alkenyl‐Substituted Peralkylated Imidazolium Ionic Liquids

Novel peralkylated imidazolium ionic liquids bearing alkoxy and/or alkenyl side chains have been synthesized and studied. Different synthetic routes towards the imidazoles and the ionic liquids comprising bromide, iodide, methanesulfonate, bis(trifluoromethylsulfonyl)imide ([NTf₂]^?), and dicyanamide {[N(CN)₂]^?} as the anion were evaluated, and this led to a library of analogues, for which the melting points, viscosities, and electrochemical windows were determined. Incorporation of alkenyl moieties hindered solidification, except for cations with high symmetry. The alkoxy‐derivatized ionic liquids are often crystalline; however, room‐temperature ionic liquids (RTILs) were obtained with the weakly coordinating anions [NTf₂]^? and [N(CN)₂]^?. For the viscosities of the peralkylated RTILs, an opposite trend was found, that is, the alkoxy derivatives are less viscous than their alkenyl‐substituted analogues. Of the crystalline compounds, X‐ray diffraction data were recorded and related to their molecular properties. Upon alkoxy substitution, the electrochemical cathodic limit potential was found to be more positive, whereas the complete electrochemical window of the alkenyl‐substituted imidazolium salts was shifted to somewhat more positive potentials.     

3‐Methylamido‐3′,4′‐ethyl­enedithiotetra­thia­fulvalene­(+) potassium tetra­isothio­cyanato­mercury(II)

In the title compound, (C₁₀H₉NOS₆)K[Hg(SCN)₄] or (EDT–TTF–CONHMe)K[Hg(SCN)₄)], fully oxidized organic (EDT–TTF–CONHMe)^+· radical cations form quasi‐one‐dimensional stacks running along the monoclinic 2₁ axis and alternating along the crystallographic [101] direction with inorganic anion stacks made from mixed K⁺–[Hg(SCN)₄]²⁻ ribbons. For each anion, three essentially collinear SCN ligands inter­act with the K⁺ ions via short N⋯K contacts, while the terminal N atom of the fourth SCN group is engaged in a number of hydrogen‐bond contacts with the –CH, –NH and –CH₂ hydrogen‐bond donors of the amide function. Radical cations are dimerized along the stacks and the crystal conductivity is activated.     

Synthesis,Characterization, and Physicochemical Properties of Hydrophobic Pyridinium‐based Ionic Liquids with N‐Propyl and N‐Isopropyl

Synthesis and physicochemical properties of four pyridinium‐based ionic liquids (ILs), N‐propylpyridinium bromide [N‐propylPyr]⁺[Br]^–, N‐isopropylpyridinium bromide [N‐isopropylPyr]⁺[Br]^–, N‐propylpyridinium hexafluorophosphate [N‐propylPyr]⁺[PF₆]^–, and N‐isopropylpyridinium hexafluorophosphate [N‐isopropylPyr]⁺[PF₆]^– are reported. The molecular structures of these compounds were characterized by FT‐IR, ¹H, ¹⁹F, and ³¹P NMR, spectroscopy. The thermal properties, conductivity, and solubility of these ionic liquids were also investigated. The effects of propyl and isopropyl alkyl lateral chain at the N‐position of pyridinium cation on the thermal stability, conductivity, and solubility of ionic liquids are discussed. The results obtained confirmed that the ionic liquids based on pyridinium cations exhibit higher decomposition temperature, low melting points, immiscible with water, and their conductivities are mainly influenced by mobility of ions.     

Tunable Aryl Alkyl Ionic Liquids with Weakly Coordinating Tetrakis((1,1,1,3,3,3‐hexafluoropropan‐2‐yl)oxy)borate [B(hfip)4] Anions

Weakly coordinating borate or aluminate anions have recently been shown to yield interesting properties of the resulting ionic liquids (ILs). The same is true for large phenyl‐substituted imidazolium cations, which can be tuned by the choice, position, or number of substituents on the aromatic ring. We were therefore interested to combine these aryl alkyl imidazolium cations with the weakly coordinating tetrakis((1,1,1,3,3,3‐hexafluoropropan‐2‐yl)oxy)borate [B(hfip)₄]^? anions to study the physical properties and viscosities of these ionic liquids. Despite the large size and high molecular weight of these readily available ILs, they are liquid at room temperature and show remarkably low glass transition points and relatively high decomposition temperatures.     

Elucidating Interactions between DMSO and Chelate‐Based Ionic Liquids

The C?D bond stretching vibrations of deuterated dimethyl sulfoxide ([D₆]DMSO) and the C₂?H bond stretching vibrations of 1,1,1,5,5,5‐hexafluoropentane‐2,4‐dione (hfac) ligand in anion are chosen as probes to elucidate the solvent–solute interaction between chelate‐based ionic liquids (ILs) and DMSO by vibrational spectroscopic studies. The indirect effect from the interaction of the adjacent S=O functional group of DMSO with the cation [C₁₀mim]⁺ and anion [Mn(hfac)₃]^? of the ILs leads to the blue‐shift of the C?D stretching vibrations of DMSO. The C₂?H bond stretching vibrations in hfac ligand is closely related to the ionic hydrogen bond strength between the cation and anion of chelate‐based ILs. EPR studies reveal that the crystal field of the central metal is kept when the chelate‐based ILs are in different microstructure environment in the solution.     

Physical and CO2-Absorption Properties of Imidazolium Ionic Liquids with Tetracyanoborate and Bis(trifluoromethanesulfonyl)amide Anions

Ionic liquids with tetracyanoborate ([TCB]^?) and bis(trifluoromethanesulfonyl)amide ([Tf₂N]^?) anions generally have low viscosities and high CO₂ capacities, and thus they are attractive solvents for CO₂-related applications. Herein, we have investigated physical and CO₂-absorption properties of 1-ethyl-3-methylimidazolium tetracyanoborate ionic liquid ([emim][TCB]) to discuss the anion effects of [TCB]^? in comparison with the previous results of [emim][Tf₂N]. The density, viscosity, electrical conductivity, and isobaric molar heat capacity were measured as a function of temperature at atmospheric pressure. [emim][TCB] has both lower density and isobaric molar heat capacity than [emim][Tf₂N]. [emim][TCB] shows superior transport properties (lower viscosity and higher electrical conductivity) compared to [emim][Tf₂N], whereas the Walden plots of molar conductivity against fluidity (reciprocal of viscosity) have smaller values in [emim][TCB] than in [emim][Tf₂N] at certain fluidities. The high-pressure CO₂ solubilities were also determined in [emim][TCB]. The mole fraction scaled solubility of CO₂ in [emim][TCB] is slightly larger than that in [emim][Tf₂N] at certain pressures and temperatures. The former ionic liquid shows much higher molarity scaled solubility of CO₂ than the latter because of the smaller molar volume. It is suggested that both anions have similar strength of intermolecular interaction with CO₂ and comparable changes in the solvent structure between neat and CO₂ solution, in view of the thermodynamic parameters of dissolution.     

Gutmann's Donor Numbers Correctly Assess the Effect of the Solvent on the Kinetics of SNAr Reactions in Ionic Liquids

We report an experimental study on the effect of solvents on the model S_NAr reaction between 1‐chloro‐2,4‐dinitrobenzene and morpholine in a series of pure ionic liquids (IL). A significant catalytic effect is observed with reference to the same reaction run in water, acetonitrile, and other conventional solvents. The series of IL considered include the anions, NTf₂^?, DCN^?, SCN^?, CF₃SO₃^?, PF₆^?, and FAP^? with the series of cations 1‐butyl‐3‐methyl‐imidazolium ([BMIM]⁺), 1‐ethyl‐3‐methyl‐imidazolium ([EMIM]⁺), 1‐butyl‐2,3‐dimethyl‐imidazolium ([BM₂IM]⁺), and 1‐butyl‐1‐methyl‐pyrrolidinium ([BMPyr]⁺). The observed solvent effects can be attributed to an “anion effect”. The anion effect appears related to the anion size (polarizability) and their hydrogen‐bonding (HB) abilities to the substrate. These results have been confirmed by performing a comparison of the rate constants with Gutmann's donicity numbers (DNs). The good correlation between rate constants and DN emphasizes the major role of charge transfer from the anion to the substrate.