Dimethyldioxirane oxidation of the epoxides of (Z)‐3‐arylidene‐1‐thioflavanones

Sulfur atom of the trans, cis‐ and trans, trans‐epoxides 1 of (Z)‐3‐arylidene‐1‐thioflavanones have been oxidized with dimethyldioxirane to afford the appropriate sulfoxides 2 and sulfones 3 depending on the amount of oxidant used.     

Synthesis and Thermal Properties of Regio‐ and Stereoregular Poly(silylene‐1,4‐phenylenevinylene)s

Polymerization of p‐(dimethylsilyl)phenylacetylene in toluene at 25 and 80°C using RhI(PPh₃)₃ as the catalyst afforded highly regio‐ and stereoregular poly(dimethylsilylene‐1,4‐phenylenevinylene)s (cis‐ 3 a and trans‐ 3 a ) containing 98% cis‐ and 99% trans‐vinylene moieties, respectively. Similarly, poly(butylmethylsilylene‐1,4‐phenylenevinylene)s ( 3 b with 91% cis‐ and 95% trans‐structures) and poly(diisopropylsilylene‐1,4‐phenylenevinylene) with 95% trans‐structure were synthesized. All polymers were soluble in common organic solvents. The trans‐type polymers showed red shifts and hyperchromic effects in the UV‐visible spectrum. The onset temperature of weight loss (T₀) of cis‐ 3 a was much higher than that of trans‐ 3 a .     

Photocyclization reactions. Part 8. Synthesis of 2‐quinolone,quinoline and coumarin derivatives using trans‐cis isomerization by photoreaction

2‐Quinolone 2 , quinoline 3 , coumarin (2H‐1‐benzopyran‐ 2 ‐one) 5 , and 2H‐1‐benzopyran hemiacetal 6 were synthesized by photocyclization reaction of traans‐o‐aminocinnamoyl derivatives trans‐ 1 and trans‐o‐hydroxycinnamoyl derivatives trans‐ 4 . The reaction proceeds through trans‐cis isomerization followed by intramolecular cyclization.     

Stereocomplementary Synthesis of cis‐ and trans‐2‐(p‐Bromophenyl)‐5‐methylthiazolidin‐4‐ones: Useful Umpolung‐type Suzuki–Miyaura Cross‐coupling Partner and Donor

Novel cis‐ and trans‐2‐(p‐bromophenyl)‐5‐methylthiazolidin‐4‐ones, S,N‐containing heterocyclic compounds, were provided in a cis‐stereocomplementary and trans‐stereocomplementary synthetic manner. cis‐Selective cyclo‐condensation proceeded between 2‐sulfanylpropanoic acid (thiolactic acid) and an imine derived from 4‐bromobenzaldehyde and methylamine, whereas Ti(OiPr)₄ and Ti(OiBu)₄‐promoted trans‐selective cyclo‐condensation proceeded between benzyl 2‐sulfanylpropanoate and the imine. The obtained cis‐ and trans ‐ 2‐(p‐bromophenyl)‐5‐methylthiazolidin‐4‐ones were successfully converted to 2‐(3‐furyl)phenyl derivatives and bis(pinacolato)diborane derivatives utilizing Suzuki–Miyaura and Miyaura–Ishiyama cross‐coupling reactions, respectively, in an umpolung manner.     

New trans/cis tetrahydroisoquinolines. 2. trans‐ and cis‐3‐(1‐methyl‐1h‐pyrrol‐2‐yl)‐1‐(2H)‐oxo‐2‐phenethyl‐1,2,3,4‐tetrahydroisoquino‐lin‐4‐carboxylic acids and subsequent transformations

Stereochemical course of the reaction of homophthalic anhydride and N‐(1‐methyl‐1H‐pyrrol‐2‐yl‐methylidene)‐phenethylamine was studied. Mixtures of the expected trans‐ and cis‐1,2,3,4‐tetrahydroiso‐quinoline‐4‐carboxylic acids trans‐ 4 and cis‐ 4 were obtained along with by‐products 5 and 6 . The ratios of all products and the diastereomers, obtained under different reaction conditions, were established by pmr. THF as a solvent and ultrasonic treatment are applied for the first time in the reaction of this type. The reaction was made diastereoselective towards any isomer. The carboxylic group of trans‐ 4 was transformed in four steps into various cyclic amino‐methyl groups yielding numerous new tetrahydroisoquinolinones trans‐ 10a‐i incorporating a given fragment of pharmacological interest. Reduction of 10a‐i was studied.     

Insight into the Thermal Ring‐Opening Polymerization of Phospha[1]ferrocenophanes

A mixture of cis/trans isomers of phospha[1]ferrocenophanes equipped with one iPr group at the α position to the bridging PhP moiety was prepared. Both isomers (cis‐ 4 and trans‐ 4 ) were obtained as racemates and could be separated so that their thermal properties were investigated individually. The molecular structure of cis‐ 4 was determined by single‐crystal X‐ray analysis showing a tilt angle α=26.35(8)°. Interconversion between both isomers occurred in the melt at elevated temperatures and revealed that the trans isomer is thermodynamically more stable. Structural and thermodynamic data was complemented by DFT calculations (B3PW91/6‐311+G(d,p) and B3PW91‐D3(BJ)/6‐311+G(d,p)). Performance of thermal ring‐opening polymerization (ROP) of trans‐ 4 at 230 °C gave polymers and cyclic oligomers. Gel permeation chromatography (GPC) of the sulfurized polymer resulted in a molecular weight of 62.5 kDa (M_w) and a polydispersity index of 1.39 (PDI). Mass spectrometric analysis of the oligomers showed the presence of cyclic species from dimers to heptamers. After sulfurization, preparative thin layer chromatography led to the separation of three isomeric dimers. Structural characterization of these dimers by single‐crystal X‐ray analysis led to the conclusion that the Fe?Cp bond breaks during the thermal ROP process. A mechanism similar to the known mechanism of the photolytic ROP of ferrocenophanes is proposed.     

The First Ring‐Enlargement of a 1‐Azabicyclo[1.1.0]butane to a 1‐Azabicyclo[2.1.1]hexane

The reactions of 3‐phenyl‐1‐azabicyclo[1.1.0]butane ( 4 ) with dimethyl dicyanofumarate ((E)‐ 8 ) and dimethyl dicyanomaleate ((Z)‐ 8 ) lead to the same mixture of cis‐ and trans‐4‐phenyl‐1‐azabicyclo[2.1.1]hexane 2,3‐dicarboxylates (cis‐ 11 and trans‐ 11 , resp.; Scheme 3). This result of a formal cycloaddition to the central C? N bond of 4 is interpreted by a stepwise reaction mechanism via a relatively stable zwitterionic intermediate 10 , which could be intercepted by morpholine to give a 1 : 1 : 1 adduct 12 , which undergoes a spontaneous elimination of HCN to yield the fumarate 13 (Scheme 4).     

The gas phase hydrogen‐bonded dimers of HOCl: A high‐level quantum chemical study

The O···H? O and Cl···H? O hydrogen bonding interactions were analyzed for HOCl dimers by using B3LYP, MP2, CCSD, and MP4(SDTQ) methods in conjunction with the various basis sets. Five isomers were found for the HOCl dimer. The ZPE and BSSE corrected binding energies were computed at the different levels of theory. At the optimized geometries obtained at CCSD/AUG‐cc‐pVDZ level, energies were re‐evaluated at MP4(SDTQ)/AUG‐cc‐pVTZ and CCSD(T)/cc‐pVTZ levels of theory. We found an average of ?20.9 and ?9.6 kJ/mol for the strength of the O···H and Cl···H hydrogen bonding interactions, respectively. Excitation and vertical ionization energies as well as rotational constants were computed at different levels of theory. The quantum theory of atoms in molecules (QTAIM) and natural bond orbital (NBO) analysis were used to elucidate the nature of the interactions of HOCl dimers. The interaction energies were decomposed by Morokuma methodology. We have computed Δ_fH°(HOCl) and Δ_fH°(HOCl⁺) using the atomization reactions. The Δ_fH°₂₉₈(HOCl) values are ?17.85 and ?18.05 kcal/mol by using CBS‐Q and CBS‐QB3 extrapolation models, respectively, in good agreement with the results given in JANAF tables. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

1,3‐Thiazolidine‐dicarboxylates from Thioketones and Thermally Generated Azomethine Ylides

The reaction of 9H‐fluorene‐9‐thione ( 1 ) with the cis‐ and trans‐isomers of dimethyl 1‐(4‐methoxyphenyl)aziridine‐2,3‐dicarboxylate (cis‐ and trans‐ 2 , resp.) in xylene at 110° yielded exclusively the spirocyclic cycloadduct with trans‐ and cis‐configurations, respectively (trans‐ and cis‐ 3 , resp.; Scheme 1). Analogously, less‐reactive thioketones, e.g., thiobenzophenone ( 5 ), and cis‐ 2 reacted stereoselectively to give the corresponding trans‐1,3‐thiazolidine‐2,4‐dicarboxylate (e.g., trans‐ 8 ; Scheme 2). On the other hand, the reaction of 5 and trans‐ 2 proceeded in a nonstereoselective course to provide a mixture of trans‐ and cis‐substituted cycloadducts. This result can be explained by an isomerization of the intermediate azomethine ylide. Dimethyl 1,3‐thiazolidine‐2,2‐dicarboxylates 14 and 15 were formed in the thermal reaction of dimethyl aziridine‐2,2‐dicarboxylate 11 with aromatic thioketones (Scheme 3). On treatment of 14 and 15 with Raney‐Ni in refluxing EtOH, a desulfurization and ring‐contraction led to the formation of azetidine‐2,2‐dicarboxylates 17 and 18 , respectively (Scheme 4).     

Stacking of Benzene with Metal Chelates: Calculated CCSD(T)/CBS Interaction Energies and Potential‐Energy Curves

Accurate values for the energies of stacking interactions of nickel‐ and copper‐based six‐membered chelate rings with benzene are calculated at the CCSD(T)/CBS level. The results show that calculations made at the ωB97xD/def2‐TZVP level are in excellent agreement with CCSD(T)/CBS values. The energies of [Cu(C₃H₃O₂)(HCO₂)] and [Ni(C₃H₃O₂)(HCO₂)] chelates stacking with benzene are ?6.39 and ?4.77 kcal mol^?1, respectively. Understanding these interactions might be important for materials with properties that are dependent on stacking interactions.     

Rate constants for the gas‐phase reactions of O3 with a series of cycloalkenes at 296 ± 2 K

Using a relative rate method, rate constants for the gas phase reactions of O₃ with 1‐ and 3‐methylcyclopentene, 1‐, 3‐, and 4‐methylcyclohexene, 1‐methylcycloheptene, cis‐cyclooctene, 1‐ and 3‐methylcyclooctene, 1,3‐ and 1,5‐cyclooctadiene, and 1,3,5,7‐cyclooctatetraene have been measured at 296 ± 2 K and atmospheric pressure of air. The rate constants obtained (in units of 10^?18 cm³ molecule^?1 s^?1) are 1‐methylcyclopentene, 832 ± 24; 3‐methylcyclopentene, 334 ± 12; 1‐methylcyclohexene, 146 ± 10; 3‐methylcyclohexene, 55.3 ± 2.6; 4‐methylcyclohexene, 73.1 ± 3.6; 1‐methylcycloheptene, 930 ± 24; cis‐cyclooctene, 386 ± 23; 1‐methylcyclooctene, 1420 ± 100; 3‐methylcyclooctene, 139 ± 9; cis,cis‐1,3‐cyclooctadiene, 20.0 ± 1.4; 1,5‐cyclooctadiene, 152 ± 10; and 1,3,5,7‐cyclooctatetraene, 2.60 ± 0.19, where the indicated errors are two least‐squares standard deviations and do not include the uncertainties in the rate constants for the reference alkenes (propene, 1‐butene, cis‐2‐butene, trans‐2‐butene, 2‐methyl‐2‐butene, and terpinolene). These rate data are compared with the few available literature data, and the effects of methyl substitution discussed. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 183–190, 2005     

Thermal [2+3]‐Cycloadditions of trans‐1‐Methyl‐2,3‐diphenylaziridine with CS and CC Dipolarophiles: An Unexpected Course with Dimethyl Dicyanofumarate

The thermal reaction of trans‐1‐methyl‐2,3‐diphenylaziridine (trans‐ 1a ) with aromatic and cycloaliphatic thioketones 2 in boiling toluene yielded the corresponding cis‐2,4‐diphenyl‐1,3‐thiazolidines cis‐ 4 via conrotatory ring opening of trans‐ 1a and a concerted [2+3]‐cycloaddition of the intermediate (E,E)‐configured azomethine ylide 3a (Scheme 1). The analogous reaction of cis‐ 1a with dimethyl acetylenedicarboxylate ( 5 ) gave dimethyl trans‐2,5‐dihydro‐1‐methyl‐2,5‐diphenylpyrrole‐3,4‐dicarboxylate (trans‐ 6 ) in accord with orbital‐symmetry‐controlled reactions (Scheme 2). On the other hand, the reactions of cis‐ 1a and trans‐ 1a with dimethyl dicyanofumarate ( 7a ), as well as that of cis‐ 1a and dimethyl dicyanomaleate ( 7b ), led to mixtures of the same two stereoisomeric dimethyl 3,4‐dicyano‐1‐methyl‐2,5‐diphenylpyrrolidine‐3,4‐dicarboxylates 8a and 8b (Scheme 3). This result has to be explained via a stepwise reaction mechanism, in which the intermediate zwitterions 11a and 11b equilibrate (Scheme 6). In contrast, cis‐1,2,3‐triphenylaziridine (cis‐ 1b ) and 7a gave only one stereoisomeric pyrrolidine‐3,4‐dicarboxylate 10 , with the configuration expected on the basis of orbital‐symmetry control, i.e., via concerted reaction steps (Scheme 10). The configuration of 8a and 10 , as well as that of a derivative of 8b , were established by X‐ray crystallography.     

Modification of Supramolecular Binding Motifs Induced By Substrate Registry: Formation of Self‐Assembled Macrocycles and Chain‐Like Patterns

The self‐assembly properties of two Zn^II porphyrin isomers on Cu(111) are studied at different coverage by means of scanning tunneling microscopy (STM). Both isomers are substituted in their meso‐positions by two voluminous 3,5‐di(tert‐butyl)phenyl and two rod‐like 4′‐cyanobiphenyl groups, respectively. In the trans‐isomer, the two 4′‐cyanobiphenyl groups are opposite to each other, whereas they are located at right angle in the cis‐isomer. For coverage up to one monolayer, the cis‐substituted porphyrins self‐assemble to form oligomeric macrocycles held together by antiparallel CN???CN dipolar interactions and CN???H‐C(sp²) hydrogen bonding. Cyclic trimers and tetramers occur most frequently but everything from cyclic dimers to hexamers can be observed. Upon annealing of the samples at temperatures >150 °C, dimeric macrocyclic structures are observed, in which the two porphyrins are bridged by Cu atoms, originating from the surface, under formation of two CN???Cu???NC coordination bonds. The trans‐isomer builds up linear chains on Cu(111) at low coverage, whereas for higher coverage the molecules assemble in a periodic, densely packed structure. Both cis‐ and trans‐bis(4′‐cyanobiphenyl)‐substituted Zn^II porphyrins behave very differently on Cu(111) compared to similar porphyrins in literature on less reactive surfaces such as Au(111) and Ag(111). On the latter surfaces, there is no signal visible between molecular orientation and the crystal directions of the substrate, whereas on Cu(111), very strong adsorbate–substrate interactions have a dominating influence on all observed structures. This strong porphyrin–substrate interaction enables a much broader variety of structures, including also less favorable intermolecular bonding motifs and geometries.     

Analogues of α‐Campholenal (= (1R)‐2,2,3‐Trimethylcyclopent‐3‐ene‐1‐acetaldehyde) as Building Blocks for (+)‐β‐Necrodol (= (1S,3S)‐2,2,3‐Trimethyl‐4‐methylenecyclopentanemethanol) and Sandalwood‐like Alcohols

To complete our panorama in structure–activity relationships (SARs) of sandalwood‐like alcohols derived from analogues of α‐campholenal (= (1R)‐2,2,3‐trimethylcyclopent‐3‐ene‐1‐acetaldehyde), we isomerized the epoxy‐isopropyl‐apopinene (?)‐ 2d to the corresponding unreported α‐campholenal analogue (+)‐ 4d (Scheme 1). Derived from the known 3‐demethyl‐α‐campholenal (+)‐ 4a , we prepared the saturated analogue (+)‐ 5a by hydrogenation, while the heterocyclic aldehyde (+)‐ 5b was obtained via a Bayer‐Villiger reaction from the known methyl ketone (+)‐ 6 . Oxidative hydroboration of the known α‐campholenal acetal (?)‐ 8b allowed, after subsequent oxidation of alcohol (+)‐ 9b to ketone (+)‐ 10 , and appropriate alkyl Grignard reaction, access to the 3,4‐disubstituted analogues (+)‐ 4f,g following dehydration and deprotection. (Scheme 2). Epoxidation of either (+)‐ 4b or its methyl ketone (+)‐ 4h , afforded stereoselectively the trans‐epoxy derivatives 11a,b , while the minor cis‐stereoisomer (+)‐ 12a was isolated by chromatography (trans/cis of the epoxy moiety relative to the C₂ or C₃ side chain). Alternatively, the corresponding trans‐epoxy alcohol or acetate 13a,b was obtained either by reduction/esterification from trans‐epoxy aldehyde (+)‐ 11a or by stereoselective epoxidation of the α‐campholenol (+)‐ 15a or of its acetate (?)‐ 15b , respectively. Their cis‐analogues were prepared starting from (+)‐ 12a . Either (+)‐ 4h or (?)‐ 11b , was submitted to a Bayer‐Villiger oxidation to afford acetate (?)‐ 16a . Since isomerizations of (?)‐ 16 lead preferentially to β‐campholene isomers, we followed a known procedure for the isomerization of (?)‐epoxyverbenone (?)‐ 2e to the norcampholenal analogue (+)‐ 19a . Reduction and subsequent protection afforded the silyl ether (?)‐ 19c , which was stereoselectively hydroborated under oxidative condition to afford the secondary alcohol (+)‐ 20c . Further oxidation and epimerization furnished the trans‐ketone (?)‐ 17a , a known intermediate of either (+)‐β‐necrodol (= (+)‐(1S,3S)‐2,2,3‐trimethyl‐4‐methylenecyclopentanemethanol; 17c ) or (+)‐(Z)‐lancifolol (= (1S,3R,4Z)‐2,2,3‐trimethyl‐4‐(4‐methylpent‐3‐enylidene)cyclopentanemethanol). Finally, hydrogenation of (+)‐ 4b gave the saturated cis‐aldehyde (+)‐ 21 , readily reduced to its corresponding alcohol (+)‐ 22a . Similarly, hydrogenation of β‐campholenol (= 2,3,3‐trimethylcyclopent‐1‐ene‐1‐ethanol) gave access via the cis‐alcohol rac‐ 23a , to the cis‐aldehyde rac‐ 24 .     

Separation,interconversion, and insecticidal activity of the cis‐ and trans‐isomers of novel hydrazone derivatives

A series of cis‐ and trans‐isomers of hydrazone derivatives were separated and analyzed through HPLC with diode‐array detection and HPLC‐MS/MS using ESI and ion trap MS. Two single crystals (A‐5‐1 and C‐2‐1) of the trans‐isomers were obtained and determined using X‐ray crystallography data, and the cis‐ to trans‐isomerization under different conditions was discussed. Both of the cis‐ and trans‐isomers of A‐4 and A‐5 exhibited good insecticidal activities against Plutella xylostella.     

Quantum topology phase diagrams for the cis‐ and trans‐isomers of the cyclic contryphan‐Sm peptide

Within the quantum theory of atoms in molecules (QTAIM) framework we present a quantum topology phase diagram (QTPD) using the Poincaré–Hopf relation of a total of 17 all new QTAIM topologies of the cis‐ and trans‐isomers of the cyclic contryphan‐Sm peptide. The resultant QTPD consists of separate regions for the cis‐ and trans‐isomers that only overlap for topologies associated with the lowest energy minima of the cis‐ and trans‐isomers. We determine the QTAIM topologies of 29 “missing” isomers. A new, contracted formulation of the QTPD is presented, this contracted formulation includes the interamino acid bond critical points (BCPs) that link together the amino acid units, the disulphide bridge “pivot” BCP and side chain bonding interactions. The seven interamino acid BCPs linking the amino acid units coincide with the so‐called peptide backbone, the conventional qualitative approach to reduce the complexity of the peptide. We expand the interpretation of ellipticity to include the associated eigenvectors and find that higher values of the ellipticity ? are associated with a greater preference to conserve folding states. We quantify previous qualitative findings that suggested the disulfide bond is central to the folding behavior of the cyclic contryphan‐Sm peptide and why the cis‐isomer is the major form of the cyclic contryphan‐Sm peptide. © 2014 Wiley Periodicals, Inc.     

Fused‐ring nitrogen and sulfur heterocycles by a tandem SN2‐michael addition reaction

A tandem S_N2‐Michael addition reaction has been developed for the synthesis of cis‐ and trans‐fused nitrogen and sulfur heterocycles from the cis and trans isomers of ethyl (±)‐(2E)‐3‐[2‐(iodomethyl)cyclo‐hexyl]‐2‐propenoate. Octahydro‐1H‐isoindole‐1‐acetic acid and octahydrobenzo[c]thiophene‐1‐acetic acid derivatives have been prepared and their stereochemistries elucidated using NMR and X‐ray crystallo‐graphic methods. Cyclization substrates for both the cis‐ and the trans‐fused rings are readily available in four steps from known compounds. Yields for the cyclization range from 80‐85% and stereochemical selec‐tivities with respect to the side chain vary from 12.5‐16:1 for the cis‐fused structures to 6‐7.5:1 for the trans‐fused structures. Steric interactions in the transition states for ring closure are proposed to rationalize the observed preferences.     

Kinetics of the thermal isomerization of 1,1,2‐trimethylcyclopropane

The Arrhenius parameters for the gas phase, unimolecular structural isomerizations of 1,1,2‐trimethylcyclopropane to three isomeric methylpentenes and two dimethylbutenes have been determined over a wide range of temperatures, 688–1124 K, using both static and shock tube reactors. For the overall loss of reactant, E_a = 63.7 (± 0.5) kcal/mol and log₁₀ A = 15.28 (± 0.12). These values are higher by 2.6 kcal/mol and 0.7–0.8 than previously reported from experimental work or predicted from thermochemical calculations. E_a for the formation of trans‐4‐methyl‐2‐pentene is 1.5 kcal/mol higher than E_a for the formation of the cis isomer, which is identical to the E_a difference previously reported for the formation of trans‐ and cis‐2‐butene from methylcyclopropane. Substitution of methyl groups for hydrogen atoms on the cyclopropane ring is expected to weaken the C? C ring bonds, and it has been reported previously that activation energies for structural isomerizations of methylcyclopropanes do decrease substantially over the series cyclopropane > methylcyclopropane > 1,1‐ or 1,2‐dimethylcyclopropane. However, the present study shows that the trend does not continue beyond dimethylcyclopropane isomerization. Besides reductions in C? C bond energy, steric interactions may be increasingly important in determining the energy surface and conformational restrictions near the transition state in isomerizations of the more highly substituted methylcyclopropanes. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 38: 475–482, 2006     

Novel Synthesis of 2‐Aryl‐4,5,6,7‐tetrahydro‐1,2‐benzisothiazol‐3(2H)‐ones and Their S‐Oxides

2‐Aryl‐4,5,6,7‐tetrahydro‐1,2‐benzisothiazol‐3(2H)‐ones 1a – e were synthesized by cyclocondensation of 2‐(thiocyanato)cyclohexene‐1‐carboxanilides 9 as a convenient new method. Their S‐oxides 10 were prepared by two routes, either by oxidation of 1 or dehydration of rac‐cis‐3‐hydroperoxysultims 11 . Furthermore, compounds 1 have been identified by HPLC? API‐MS‐MS as intermediates in the oxidation process of the salts 6 . The hydroperoxides 12b and rac‐trans‐ 11b have been unambiguously detected by HPLC? MS investigations and in the reaction of rac‐cis‐ 13b with H₂O₂ to the hydroperoxides rac‐trans‐ 11b and rac‐cis‐ 11b .