Hybrid alginate beads with thermal‐responsive gates for smart drug delivery

Polysaccharide‐based thermo‐responsive material was prepared by grafting PNIPAAm onto hybrid alginate beads, in which a biomineralized polyelectrolyte layer was constructed aiming to enhance the mechanical strength and ensure higher graft efficiency. XPS results demonstrated that the incorporation of PNIPAAm to the hybrid beads was successful, and the PNIPAAm‐grafted beads were more hydrophilic than the ungrafted ones as indicated by their swelling behavior. The drug release behaviors revealed that the grafted beads were both thermo‐ and pH‐sensitive, and the PNIPAAm existed in the pores of the alginate beads acted as the “on–off” gates: the pores of the beads were covered by the stretched PNIPAAm to delay the drug release at 25°C and opened to accelerate the drug release at 37°C because of the shrinking of PNIPAAm molecules. This paper would be a useful example of grafting thermo‐responsive polymers onto biodegradable natural polymer substrate. The obtained beads provide a new mode of behavior for thermo‐responsive “smart” polysaccharide materials, which is highly attractive for targeting drug delivery system and chemical separation. Copyright © 2010 John Wiley & Sons, Ltd.     

Inorganic–organic hybrid alginate beads with LCST near human body temperature for sustained dual‐sensitive drug delivery

In order to obtain dual‐stimuli‐responsive (temperature/pH) alginate beads that exhibit LCST close to human body temperature for sustained drug release applications, poly (NIPAAm‐co‐AAm) hydrogel (with LCST 37.5°C) were selected and associated with calcium alginate to prepare inorganic–organic hybrid biomineralized polysaccharide alginate beads via a one‐step method in this paper. Scanning electron microscopy (SEM) and energy dispersive X‐ray spectrometer (EDS) results demonstrated that calcium phosphate could not only be found in the surface but also in the cross‐section of biomineralized polysaccharide beads. Both equilibrium swelling and indomethacin release behavior were found to be pH‐ and thermo‐responsive. In addition, indomethacin release profile could be sustained with a inorganic–organic hybrid membrane: the release amount reached 96% within 4 hr for the unmineralized beads, while a drug release of only 64% obtained after subjecting the biomineralized polysaccharide beads to the same treatment. These results indicate that the biomineralized polysaccharide membrane could prevent the permeability of the encapsulated drug and reduce the drug release rate effectively. The studied system has the potential to be used as an effective smart sustainable delivery system for biomedical applications. Copyright © 2008 John Wiley & Sons, Ltd.     

Formulation characterization and in vitro evaluation of acacia gum–calcium alginate beads for oral drug delivery systems

In the present work, new matrix bead formulations based on linear and branched polysaccharides have been developed using an ionic gelation technique, and their potential use as oral drug carriers has been evaluated. Using calcium chloride as a cross‐linking agent and sodium diclofenac (SD), as a model drug, acacia gum–calcium alginate matrix beads were formulated. The response surface methodology based on 3² factorial design was used as a statistical method to evaluate and optimize the effects of the biopolymers‐blend ratio and the concentration of calcium chloride on the particle size (mm), density (g/cm³), drug encapsulation efficiency (%), and the cumulative drug release after 8 hours (R_8h,%). The optimized beads with the highest drug encapsulation efficiency were examined for a drug‐excipients compatibility by powder X‐ray diffraction, differential scanning calorimetry, thermo‐gravimetric analysis, and Fourier transform‐infrared spectroscopy analyses. The swelling and degradation of the matrix beads were found to be influenced by the pH of medium. Higher degrees of swelling were observed in intestinal pH than in stomach pH. Accordingly, the drug release study showed that the amount of SD released from the acacia gum–calcium alginate beads was higher in intestinal pH than in stomach pH. Therefore, the in vitro drug release from the SD‐loaded beads appears to follow the controlled‐release (Hixson‐Crowell) pattern involving a case‐2 transport mechanism operated by swelling and relaxation of the polymeric blend matrix.     

Biomolecular Release from Alginate‐modified Electrode Triggered by Chemical Inputs Processed through a Biocatalytic Cascade – Integration of Biomolecular Computing and Actuation

Biocatalytic cascades involving more than one or two enzyme‐catalyzed step are inefficient inside alginate hydrogel prepared on an electrode surface. The problem originates from slow diffusion of intermediate products through the hydrogel from one enzyme to another. However, enzyme activity can be improved by surface immobilization. We demonstrate that a complex cascade of four consecutive biocatalytic reactions can be designed, with the enzymes immobilized in an LBL‐assembled polymeric layer at the alginate‐modified electrode surface. The product, hydrogen peroxide, then induces dissolution of iron‐cross‐linked alginate, which results in release process of entrapped biomolecular species, here fluorescently marked oligonucleotides, denoted F‐DNA. The enzymatic cascade can be viewed as a biocomputing network of concatenated AND gates, activated by combinations of four chemical input signals, which trigger the release of F‐DNA. The reactions, and diffusion/release processes were investigated by means of theoretical modeling. A bottleneck reaction step associated with one of the enzymes was observed. The developed system provides a model for biochemical actuation triggered by a biocomputing network of reactions.     

Dual crosslinked pH‐ and temperature‐sensitive hydrogel beads for intestine‐targeted controlled release

Novel drug‐loaded hydrogel beads for intestine‐targeted controlled release were developed by using pH‐ and temperature‐sensitive carboxymethyl chitosan‐graft‐poly(N,N‐diethylacrylamide) (CMCTS‐g‐PDEA) hydrogel as carriers and vitamin B₂ (VB₂) as a model drug. The hydrogel beads were prepared based on Ca²⁺ ionic crosslinking in acidic solution and formed dual crosslinked network structure. The structure of hydrogel and morphology of drug‐loaded beads were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The study about swelling characteristics of hydrogel beads indicated that the beads had obvious pH‐ and temperature‐sensitivity. In vitro release studies of drug‐loaded beads were carried out in pH 1.2 HCl buffer solution and pH 7.4 phosphate buffer solution at 37°C, respectively. The results indicated that the dual crosslinked method could effectively control the drug release rate under gastrointestinal tract (GIT) conditions, which was superior to traditional single crosslinked beads. In addition, the effects of grafting percentage, pH value, and temperature on the release behavior of the VB₂ were investigated. The drug release mechanism of CMCTS‐g‐PDEA drug‐loaded beads was analyzed by Peppa's potential equation. According to this study, the dual crosslinked hydrogel beads based on CMCTS‐g‐PDEA could serve as suitable candidate for drug site‐specific carrier in intestine. Copyright © 2009 John Wiley & Sons, Ltd.     

Dynamic Release of Propranolol HCl from Cationic Ion–Exchanger–Loaded Calcium Alginate Beads

The dynamic release of drug propranolol HCl from the propranolol HCl–resin complex (PRC) loaded calcium alginate beads has been studied in the buffer media of pH 1.2 at the physiological temperature 37°C. The PRC encapsulated beads demonstrated nearly 58.04% release while naked PRC particles released 98.00% drug in 24 h in the gastric fluid. The amount of drug released was found to increase with and decrease in the amount of sodium alginate in the beads. Similarly, with the increase in the amount of entrapped PRC particles within the beads, the quantity of drug released was also observed to increase. The degree of crosslinking of beads also affected the release kinetics. Interestingly, the release from naked PRC particles followed ‘first‐order’ kinetics while PRC particles, entrapped in calcium–alginate beads, exhibited ‘diffusion controlled’ release behavior as indicated by liner nature of fractional release vs. √t plot.     

SEM–EDS study of ionically cross-linked alginate and alginic acid bead formation

Alginate is a natural polysaccharide that is widely used in industrial applications. Here, beads of alginic acid, calcium, and copper alginate were prepared by the addition of soluble sodium alginate to a solution of hydrochloric acid or the corresponding cation. The progress of gelation inside the beads was followed by the degree of opacity at different times, which corresponded well to an apparent morphology change observed in freeze-dried bead cross sections analyzed by scanning electron microscopy. Furthermore, diffusion of Cu²⁺ ions across the beads was followed by energy dispersive X-ray spectroscopy, which revealed colocalization of the cross-linking cation and the morphologically distinct bead regions.     

Gelatin scaffolds functionalized by silver nanoparticle‐containing calcium alginate beads for wound care applications

The embedding of silver nanoparticle (nAg)‐containing calcium alginate (CaAlg) beads in gelatin scaffolds was aimed to reduce the burst release and prolong the release of silver (Ag⁺) ions for a long period of time. The reduced sizes of the nAg‐containing CaAlg beads were prepared by an emulsification/external gelation method. The diameter of these beads was ~2 µm. The nAg‐containing CaAlg beads were then embedded into gelatin scaffolds by a freeze‐drying method for evaluating the potential of these scaffolds as wound dressings. The compressive modulus of these scaffolds embedded with nAg‐containing CaAlg beads ranged between 7 and 9 kPa. For release study, the cumulative released amounts of Ag⁺ ions from the nAg‐containing CaAlg beads embedded in gelatin scaffolds were lower than those from the nAg‐containing CaAlg beads. Moreover, the nAg‐containing CaAlg beads embedded in gelatin scaffolds had great antibacterial activity and low cytotoxicity. Thus, these scaffolds had potential for sustaining the release and use in wound care applications, especially chronic wound. Copyright © 2016 John Wiley & Sons, Ltd.     

Studies in the development of nateglinide loaded calcium alginate and chitosan coated calcium alginate beads

Nateglinide loaded alginate-chitosan beads were prepared by ionic gelation method for controlling the drug release by using various combinations of chitosan and Ca2+ as cation and alginate as anion. IR spectrometry, scanning electron microscopy, differential scanning calorimetry and X-ray powder diffractometry were used to investigate the physicochemical characteristics of the drug in the bead formulations. The calcium content in beads was determined by atomic absorption spectroscopy. The swelling ability of the beads in different media (pH 1.2, 4.5, 6.8) has been found to be dependent on the presence of polyelectrolyte complex of the beads and the pH of the media. The ability to release the Nateglinide was examined as a function of chitosan and calcium chloride content in the gelation medium. It is evident that the rate of drug release and its kinetics could be controlled by changing the chitosan and the calcium chloride concentrations. Calcium alginate beads released more than 95% of drug with in 8 h; whereas coated beads sustained the drug release and released only 75-80% of drug. The drug release mechanism analyzed indicates that the release follows either "anomalous transport" or "case-II transport".     

Self‐Assembling Supramolecular Hybrid Hydrogel Beads

With the goal of imposing shape and structure on supramolecular gels, we combine a low‐molecular‐weight gelator (LMWG) with the polymer gelator (PG) calcium alginate in a hybrid hydrogel. By imposing thermal and temporal control of the orthogonal gelation methods, the system either forms an extended interpenetrating network or core–shell‐structured gel beads—a rare example of a supramolecular gel formulated inside discrete gel spheres. The self‐assembled LMWG retains its unique properties within the beads, such as remediating Pd^II and reducing it in situ to yield catalytically active Pd⁰ nanoparticles. A single PdNP‐loaded gel bead can catalyse the Suzuki–Miyaura reaction, constituting a simple and easy‐to‐use reaction‐dosing form. These uniquely shaped and structured LMWG‐filled gel beads are a versatile platform technology with great potential in a range of applications.     

Duplex‐forming Oligonucleotide of Triazole‐linked RNA

An oligonucleotide of triazole‐linked RNA (^TLRNA) was synthesized by performing consecutive copper‐catalyzed azide‐alkyne cycloaddition reactions for elongation. The reaction conditions that had been optimized for the synthesis of 3‐mer ^TLRNA were found to be inappropriate for longer oligonucleotides, and the conditions were reoptimized for the solid‐phase synthesis of an 11‐mer ^TLRNA oligonucleotide. Duplex formation of the 11‐mer ^TLRNA oligonucleotide was examined with the complementary oligonucleotide of natural RNA to reveal the effects of the 2′‐OH groups on the duplex stability.     

Template‐Directed Copying of RNA by Non‐enzymatic Ligation

The non‐enzymatic replication of the primordial genetic material is thought to have enabled the evolution of early forms of RNA‐based life. However, the replication of oligonucleotides long enough to encode catalytic functions is problematic due to the low efficiency of template copying with mononucleotides. We show that template‐directed ligation can assemble long RNAs from shorter oligonucleotides, which would be easier to replicate. The rate of ligation can be greatly enhanced by employing a 3′‐amino group at the 3′‐end of each oligonucleotide, in combination with an N‐alkyl imidazole organocatalyst. These modifications enable the copying of RNA templates by the multistep ligation of tetranucleotide building blocks, as well as the assembly of long oligonucleotides using short splint oligonucleotides. We also demonstrate the formation of long oligonucleotides inside model prebiotic vesicles, which suggests a potential route to the assembly of artificial cells capable of evolution.     

Four‐fold Channel‐Nicked Human Ferritin Nanocages for Active Drug Loading and pH‐Responsive Drug Release

Human ferritins are emerging platforms for non‐toxic protein‐based drug delivery, owing to their intrinsic or acquirable targeting abilities to cancer cells and hollow cage structures for drug loading. However, reliable strategies for high‐level drug encapsulation within ferritin cavities and prompt cellular drug release are still lacking. Ferritin nanocages were developed with partially opened hydrophobic channels, which provide stable routes for spontaneous and highly accumulated loading of Fe^II‐conjugated drugs as well as pH‐responsive rapid drug release at endoplasmic pH. Multiple cancer‐related compounds, such as doxorubicin, curcumin, and quercetin, were actively and heavily loaded onto the prepared nicked ferritin. Drugs on these minimally modified ferritins were effectively delivered inside cancer cells with high toxicity.     

Oligodeoxynucleotides Containing 2′‐Deoxy‐1‐methyladenosine and Dimroth Rearrangement

2′‐Deoxy‐1‐methyladenosine was incorporated into synthetic oligonucleotides by phosphoramidite chemistry. Chloroacetyl protecting group and controlled anhydrous deprotection conditions were used to avoid Dimroth rearrangement. Hybridization studies of intramolecular duplexes showed that introduction of a modified residue into the loop region of the oligonucleotide hairpin increases the melting temperature. It was shown that modified oligonucleotides may be easily transformed into oligonucleotides containing 2′‐deoxy‐N⁶‐methyladenosine.     

Investigation of swelling,drug release and diffusion behaviors of poly(N‐isopropylacrylamide)/poly (N‐vinylpyrrolidone) full‐IPN hydrogels

The synthesis of sequential full interpenetrating polymer networks (IPNs) based on poly (N‐isopropylacrylamide) (PNIPAAm) and negatively charged poly(N‐vinyl‐2‐pyrrolidone) (PNVP) was described and their swelling, drug release, and diffusion studies were investigated. PNIPAAm was used as a host network. According to swelling experiments, IPNs gave relatively lower swelling ratios compared to PNIPAAm hydrogel due to the higher cross‐linking density. Lidocaine (LD) was used as a model drug for the investigation of drug release behavior of IPNs. LD uptake of the IPNs were found to increase from 24 to 166 (mg LD / g dry gel) with increasing amount of PNIPAAm and AMPS contents in the IPN structure. It was observed that the specific interaction between drug and AMPS co‐monomer influenced the drug release profile. In the diffusion transport mechanism study in water, the results indicated that the swelling exponents n for all IPNs are in the range from 0.50 to 0.72. This implies that the swelling transport mechanism was transferred from Fickian to non‐Fickian transport, with increasing AMPS content and NIPAAm character in the IPN structure. In addition, diffusion of LD within the IPNs showed similar trend. The incorporation of AMPS leads to an increase in electrostatic interaction between charge sites on carboxylate ions and cationic LD molecules. Therefore, the highest diffusion coefficient (D) of drug was found for IPN2 sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Dynamic Release of Riboflavin from Ethyl Cellulose Coated Barium Alginate Beads for Gastrointestinal Drug Delivery: An in vitro Study

The present work describes the dynamic release of model drug riboflavin form uncoated and ethyl cellulose coated barium alginate beads in the media of continuous varying pH at the physiological temperature 37°C. The drug release behavior has been studied in the simulating gastric fluid (SGF, pH 1.2) for 0–2 h and then in the simulating intestinal fluid (SIF pH 6.8) for 2–48 h. In addition to the traditional dissolution test (TDT, the dynamic release has also been studied by a newly developed method, called ‘flow through diffusion cell’ (FTDC). The release profiles, obtained by using these two methods have been found to differ appreciably from each other. Moreover, the nature of the solid mass surrounding the beads in the FTDC method also influences the release behavior of beads. The uncoated beads demonstrated faster drug release of drug in the medium of lower pH (i.e., 1.2) as compared to that in the medium of pH 6.8 and the release process was found to be diffusion controlled.     

Multi‐responsive methylcellulose/Fe‐alginate‐g‐PVA/PVA/Fe3O4 microgels for immobilizing enzyme

To take advantage of the respective character of methylcellulose (MC), poly(vinyl alcohol) (PVA), and alginate, novel physically cross‐linked methylcellulose/Fe‐alginate‐g‐PVA/PVA (MC/Fe‐Alg‐g‐PVA/PVA) microgels were prepared by emulsification/thermal gelation/freezing–thawing/ionic cross‐linking technique. Subsequently, some ferrous ions bound in the microgels were transformed into magnetite via in situ self oxidation. A model enzyme α‐amylase was immobilized into microgels by direct adsorption. The release behavior of α‐amylase indicated that the obtained complex microgels were magnetic‐, temperature‐, and pH‐ triple sensitive. Copyright © 2010 John Wiley & Sons, Ltd.     

Layer‐by‐Layer Assembled Nanotubes as Biomimetic Nanoreactors for Calcium Carbonate Deposition

Enzyme‐loaded magnetic polyelectrolyte multilayer nanotubes prepared by layer‐by‐layer assembly combined with the porous template could be used as biomimetic nanoreactors. It is demonstrated that calcium carbonate can be biomimetically synthesized inside the cavities of the polyelectrolyte nanotubes by the catalysis of urease, and the size of the calcium carbonate precipitates was controlled by the cavity dimensions. The metastable structure of the calcium carbonate precipitates inside the nanotubes was protected by the outer shell of the polyelectrolyte multilayers. These features may allow polyelectrolyte nanotubes to be applied in the fields of nanomaterials synthesis, controlled release, and drug delivery.

     

Increased Affinity of 2′‐O‐(2‐Methoxyethyl)‐Modified Oligonucleotides to RNA through Conjugation of Spermine at Cytidines

Structural modification at the 2′‐O‐position of riboses in oligonucleotide therapeutics is of critical importance for their use as drugs. To date, the methoxyethyl (MOE) substituent is the most important and features in dozens of antisense oligonucleotides that have been tested in clinical trials. Yet, the search for new improved modifications continues in a quest for increased oligonucleotide potency, improved transport in vivo and favorable metabolism. Recently, we described how the conjugation of spermine groups to pyrimidines in oligonucleotides vastly increases their affinity for complementary RNAs through accelerated binding kinetics. Here we describe how spermines can be linked to the exocyclic amino groups of cytidines in MOE‐oligonucleotides employing a straightforward ‘convertible nucleoside approach’ during solid phase synthesis. Singly‐ or doubly‐modified oligonucleotides show greatly enhanced affinity for complementary RNA, with potential for a new generation of MOE‐based oligonucleotide drugs.     

Liquid‐Phase Synthesis of 2′‐Methyl‐RNA on a Homostar Support through Organic‐Solvent Nanofiltration

Due to the discovery of RNAi, oligonucleotides (oligos) have re‐emerged as a major pharmaceutical target that may soon be required in ton quantities. However, it is questionable whether solid‐phase oligo synthesis (SPOS) methods can provide a scalable synthesis. Liquid‐phase oligo synthesis (LPOS) is intrinsically scalable and amenable to standard industrial batch synthesis techniques. However, most reported LPOS strategies rely upon at least one precipitation per chain extension cycle to separate the growing oligonucleotide from reaction debris. Precipitation can be difficult to develop and control on an industrial scale and, because many precipitations would be required to prepare a therapeutic oligonucleotide, we contend that this approach is not viable for large‐scale industrial preparation. We are developing an LPOS synthetic strategy for 2′‐methyl RNA phosphorothioate that is more amenable to standard batch production techniques, using organic solvent nanofiltration (OSN) as the critical scalable separation technology. We report the first LPOS‐OSN preparation of a 2′‐Me RNA phosphorothioate 9‐mer, using commercial phosphoramidite monomers, and monitoring all reactions by HPLC, ³¹P NMR spectroscopy and MS.