Relationships among the transition elements

As part of a series of contributions on patterns in the periodic table, the relationships among the transition metals are examined here in a systematic manner. It is concluded that the traditional method of categorizing transition elements by group or by period is not as valid as by using combinations thereof. From chemical similarities, it is proposed that the transition metals be considered as the [V–Cr–Mn] triad; the [Fe–Co–Ni–Cu] tetrad; the [Ti–Zr–Hf–Nb–Ta] pentad; the [Mo–W–Tc–Re] tetrad; and the [Ru–Os–Rh–Ir–Pd–Pt–Au] heptad. Silver does not fit neatly in anywhere and is better linked with thallium.     

Effect of the Preparation Methodof Al–Mg–O Catalysts on the Selective Decomposition of Ethanol

Summary.  Selective decomposition of ethanol was used as a test reaction at 350°C to evaluate the catalytic activity of two Al–Mg–O mixed oxides prepared by two different methods (wet impregnation and coprecipitation). The catalyst precursors were examined by TG and DTA and were calcined between 500–900°C for 5 h in air. The surface area of all catalysts was measured by N₂ sorption using the BET method. The total acidity and basicity were determined by TPD using pyridine and formic acid. The catalysts were characterized by XRD analysis. It was found that the preparation method of Al–Mg–O catalyst has a great effect on the selective decomposition of ethanol. Al–Mg–O (I) catalysts, prepared by wet impregnation, were more selective towards ethene formation during dehydration of ethanol. This is ascribed to their high total surface acidity. On the other hand, Al–Mg–O (II) catalysts, prepared by coprecipitation, were highly selective in the oxidative dehydrogenation of ethanol to yield acetaldehyde. This could be attributed to their high concentration of basic sites. In addition, the production of traces of diethyl ether was also observed (three times more for Al–Mg–O (II) than for Al–Mg–O (I)). Corresponding author. E-mail: shalawy99@yahoo.com Received October 12, 2001. Accepted (revised) January 7, 2002     

Simultaneous GC-MS quantitation of acids and sugars in the hydrolyzates of immunostimulant, water-soluble polysaccharides of basidiomycetes

Summary The simultaneous quantitation of acids and sugars as their trimethyl silyl (TMS) derivatives has been extended in order to identify and quantitate the simple acid and sugar constituents in the hydrolyzates of various immunostimulant, water-soluble polysaccharides obtained from various Basidiomycetes, such as Armillariella mellea, Auricularia auricula-judae, Coriolus versicolor, Flammulina velutipes, Fomes fomentarius, Ganoderma applanatum, Ganoderma lucidum, Pleurotus ostreatus, Schizophyllum commune, Trametes hirsuta. Optimum hydrolysis conditions, performed with 2 M trifluoroacetic acid (TFAA) for five hrs, proved the presence of several sugars and acids with maximum recovery. (i) the total sugar/sugar alcohol content of polysaccharides varied between 20- and 65% and consisted of arabitol (0.01–10.2%), arabinose (0.09–1.3%), ribose (0.2–1.8%), fucose (0.3–1.2%), mannitol (0.01–5.3%), sorbitol (0.01–0.05%), galactiol (0.04%), fructose (0.08–0.8%), galactose (0.9–29%), glucose (10–53%), uronic acids (0.14–3.7%), sucrose (0.03–2%), trehalose (0.2–1%), cellobiose (0.01–0.6%), maltose (0.2–1.9%), other disaccharides (0.2–8%). (ii) The total of acids varied from 1.5 to 30% including o-phosphoric (1.3–19%), malic (0.08–4.7%), citric (0.08–4.7%), isocitric; (3%) and C₁₆−C₁₈ fatty acids (1–6%).     

Extension of the platform of applicability of the SM5.42R universal solvation model

We present eight new parameterizations of the SM5.42R solvation model: in particular we present parameterizations for HF/MIDI!, HF/6-31G^*, HF/6-31+G^*, HF/cc-pVDZ, AM1, PM3, BPW91/MIDI!, and B3LYP/MIDI!. Two of the new cases are parameterized using the reaction-field operator presented previously, and six of the new cases are parameterized with a simplified reaction-field operator; results obtained by the two methods are compared for selected examples. For a training set of 2135 data for 275 neutral solutes containing H, C, N, O, F, S, P, Cl, Br, and I in 91 solvents (water and 90 nonaqueous solvents), seven of the eight new parameterizations give mean unsigned errors in the range 0.43–0.46 kcal/mol, and the eighth – for a basis set containing diffuse functions – gives a mean unsigned error of 0.53 kcal/mol. The mean unsigned error for 49 ionic solutes (containing the same elements) in water is 3.5–3.9 kcal/mol for the Hartree–Fock, Becke–Perdew–Wang-1991 and Becke three-parameter Lee–Yang–Parr cases and 4.1 and 4.0 kcal/mol for parameterized model 3 and Austin model 1, respectively. The methods are tested for sensitivity of solvation free energies to geometry and for predicting partition coefficients of carbonates, which were not included in the training set. Received: 24 November 1998 / Accepted: 31 December 1998 / Published online: 7 June 1999     

Modification and re-validation of the ethyl acetate-based multi-residue method for pesticides in produce

The ethyl acetate-based multi-residue method for determination of pesticide residues in produce has been modified for gas chromatographic (GC) analysis by implementation of dispersive solid-phase extraction (using primary–secondary amine and graphitized carbon black) and large-volume (20 μL) injection. The same extract, before clean-up and after a change of solvent, was also analyzed by liquid chromatography with tandem mass spectrometry (LC–MS–MS). All aspects related to sample preparation were re-assessed with regard to ease and speed of the analysis. The principle of the extraction procedure (solvent, salt) was not changed, to avoid the possibility invalidating data acquired over past decades. The modifications were made with techniques currently commonly applied in routine laboratories, GC–MS and LC–MS–MS, in mind. The modified method enables processing (from homogenization until final extracts for both GC and LC) of 30 samples per eight hours per person. Limits of quantification (LOQs) of 0.01 mg kg⁻¹ were achieved with both GC–MS (full-scan acquisition, 10 mg matrix equivalent injected) and LC–MS–MS (2 mg injected) for most of the pesticides. Validation data for 341 pesticides and degradation products are presented. A compilation of analytical quality-control data for pesticides routinely analyzed by GC–MS (135 compounds) and LC–MS–MS (136 compounds) in over 100 different matrices, obtained over a period of 15 months, are also presented and discussed. At the 0.05 mg kg⁻¹ level acceptable recoveries were obtained for 93% (GC–MS) and 92% (LC–MS–MS) of pesticide–matrix combinations.     

Basis of the 'duplication' strategy for enhancing the enantiomeric excess in chiral resolutions: proof of the equivalence of rate and product ratios

The 'duplication' strategy for the further enrichment of an already enantiomerically-enriched mixture consists of the formation of all the three possible 'dimeric' diastereomers, i.e., (R)–X–(R), (R)–X–(S) and (S)–X–(S), where X is an appropriate spacer that can be readily cleaved to yield the original enantiomers. The mixture of (R)–X–(R) and (S)–X–(S) thus obtained would be of higher enantiomeric excess (e.e.) as compared to the original mixture, on the basis of a simple kinetic scheme. The success of the strategy is experimentally well-established, but is apparently based on the (unproven) assumption that the theoretically-derived rate ratios are identical to the experimentally observed product ratios. Although the detailed kinetic treatment for a system such as the above is extremely complex, it is possible to show (mathematically) that the above assumption is indeed justified when all the three diastereomers are formed without chiral discrimination (as assumed in the strategy).     

XRF Analysis of Microsamples of Semiconductor Type Multielement Materials by the Thin Layer Method. Determination of Cr, Co, Ni, Cu, Zn, Ga, Se, Sb, Yb

 A simple and quick method of durable samples preparation by the thin layer method through direct digesting of the analysed material on the substrate has been presented. Four- and three-component mono- and polycrystals have been analysed. Standards have been used in calibration containing: Cr, Co, Ni, Cu, Zn, Ga, Se, Sb, Yb. To improve the correlation between the concentration and the fluorescent radiation models of mathematical corrections have additionally been used: multiple linear regression, Lucas-Tooth-Pyne model (L. T. P.) and de Jongh model (d. J.). Statistical parameters: detection limits for 0.5 mg samples: Cr–0.041%, Co–0.034%, Ni–0.042%, Cu–0.053%, Zn–0.054%, Ga–0.057%, Se–0.057%, Sb–0.113%, Yb–0.077%. Correlation coefficients: simple regression 0.9946–0.9997, multiple regression 0.9974–1.0000, L. T. P. 0.9993–1.0000, d. J. 0.9995–1.0000. Received August, 1, 1998. Revision March 25, 1999.     

Conformational features of peptide fragments of the C-end of histone H1

The conformational possibilities of four synthesized oligopeptides with the amino acid sequences 165–172, 173–184, 152–172, and 152–184 of the C-end of histone H1 of calf thymus above been studied in solution under various conditions by the method of circular dichroism. V. I. Nikitin Institute of Chemistry, Academy of Sciences of the Tadchik SSR, Dushanbe. Institute of Cytology, Academy of Sciences of the USSR, Leningrad. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 793–798, November–December, 1990.     

Kinetic parameters determination in non-isothermal conditions for the crystallisation of a silica-soda-lead glass

Two integral isoconversional methods (Flynn–Wall–Ozawa and Kissinger–Akahira–Sunose) and the invariant kinetic parameters method (IKP) were used in order to examine the kinetics of the non-isothermal crystallisation of a silica-soda-lead glass. The objective of the paper is to show the usefulness of the IKP method to determine both the activation parameters and the kinetic model of the investigated process. Thismethod associated with the criterion of coincidence of kinetic parameters for all heating rates and some procedures of the evaluation of the parameter from Johnson–Mehl–Avrami–Erofeev–Kolmogorov (JMAEK) equation led us to the following kinetic triplet: activation energy, E=170.5±2.5 kJ mol^–1 , pre-exponential factor, A=1.178±0.350·10 10 min^–1 and JMAEK model (A _m) m=1.5.     

Rare earth element doping effect on the bonding and the transport property of δ-MoN

Combining non-equilibrium Green’s function technique with density functional theory, the rare earth element doping effect on the bonding and the transport property of δ-MoN were theoretically investigated. The Mo–N bond lengths become more uneven after dopings. Some Mo–N bonds were heavily lengthened by the La- and Gd-dopings, resulting in obvious damages of their bonding. Evident covalent-like La–N and Gd–N bonds were formed in La–MoN and Gd–MoN, respectively, while the Yb atom underwent an ionic-like interaction with its neighboring N atoms in Yb–MoN. A clear drop of the conductivity was found after La- and Gd-dopings. On the contrary, the conductivity was improved upon the Yb-doping. This case was rationalized from the carrier density and the scattering of the carriers. The backscattering effect was evident at the impurities. The La- and Gd-dopings could not effectively increase the carrier density near the Fermi level, while the Yb atom could offer f-carriers to transfer from the valence band to the conduction band.     

Slurry sampling electrothermal vaporization inductively coupled plasma mass spectrometry for the determination of Cr, Cd and Pb in plastics

Ultrasonic slurry sampling electrothermal vaporization dynamic reaction cell inductively coupled plasma mass spectrometry (USS–ETV–DRC–ICP–MS) for the determination of Cr, Cd and Pb in several plastic samples, using NH₄NO₃ as the modifier, is described. The influences of the instrumental operating conditions and the slurry preparation technique on the ion signals are investigated. A reduction in the intensity of the background at signals corresponding to chromium masses (arising from matrix elements) was achieved by using NH₃ as the reaction cell gas in the DRC. The method was applied to determine Cr, Cd and Pb in two polystyrene (PS) samples and a polyvinyl chloride (PVC) sample using two different calibration methods, namely standard addition and isotope dilution. The results were in good agreement with those for digested samples analyzed by ultrasonic nebulization DRC–ICP–MS. The precision between sample replicates was better than 17% with the USS–ETV–DRC–ICP–MS method. The method detection limits, estimated from standard addition curves, were about 6–9, 1–2 and 8–11 ng g⁻¹ for Cr, Cd and Pb, respectively, in the original plastic samples.     

Influence of preparation method on the performance of Mn–Ce–O catalysts

Mn–Ce–O catalysts were prepared by the sol–gel method with different citric acid amounts in preparation. The catalysts were characterized by using BET, XRD, TPR, XPS and their catalytic activities in methane combustion were also investigated. Results showed that the surface area, Mn⁴⁺ and O_latt are responsible for the high catalytic activity of Mn–Ce–O catalysts.     

Volcano correlations for the reactivity of surface-confined cobalt N<Subscript>4</Subscript>-macrocyclics for the electrocatalytic oxidation of 2-mercaptoacetate

We have investigated the electrocatalytic activity of several substituted and unsubstituted cobalt–phthalocyanines of substituted tetraphenyl porphyrins and of vitamin B₁₂, for the electro-oxidation of 2-mercaptoacetate, with the complexes pre-adsorbed on a pyrolytic graphite electrode. Several N4-macrocyclic were used to have a wide variety of Co(II)/(I) formal potentials. The electrocatalytic activity, measured as current at constant potential, increases with the Co(II)/(I) redox potential for porphyrins as Co–pentafluorotetraphenylporphyrin < Co–tetrasulfonatotetraphenylporphyrin < Co-2,2′,2″,2‴tetra-aminotetraphenylporphyrin and decreases for cobalt phthalocyanines as Co-3,4-octaethylhexyloxyphthalocyanine > Co–octamethoxyphthalocyanine > Co–tetranitrophthalocyanine Co–tetraaminophthalocyanine > Co–unsubstituted phthalocyanine > Co–tetrasulfonatophthalocyanine > Co–perfluorinated phthalocyanine. Vitamin B₁₂ exhibits the maximum activity. A correlation of log I (at constant potential) versus the Co(II)/(I) formal potential of the catalysts gives a volcano curve. This clearly shows that the search for better catalysts for this reaction point to those N₄-macrocyclic complexes with Co(II)/(I) formal potentials close to −0.84 V versus SCE, which correspond to an optimum situation for the interaction of the thiol with the active site. Dedicated to Prof. Dr. Teresa Iwasita on the occasion of her 65th birthday in recognition of her numerous contributions to interfacial electrochemistry.     

Thermophysical Investigations of the Polymorphous Phases of Calcium Carbonate

1. Results of thermodynamic and kinetic investigations for the different crystalline calcium carbonate phases and their phase transition data are reported and summarized (vaterite: V; aragonite: A; calcite: C). A→C: T _tr=455±10°C, Δ_tr H=403±8 J mol^–1 at T _tr, V→C: T _tr=320–460°C, depending on the way of preparation,Δ_tr H=–3.2±0.1 kJ mol^–1 at T _tr,Δ_tr H=–3.4±0.9 kJ mol^–1 at 40°C, S _V ^Θ= 93.6±0.5 J (K mol)^–1, A→C: E _A=370±10 kJ mol^–1; XRD only, V→C: E _A=250±10 kJ mol^–1; thermally activated, iso- and non-isothermal, XRD 2. Preliminary results on the preparation and investigation of inhibitor-free non-crystalline calcium carbonate (NCC) are presented. NCC→C: T _tr=276±10°C,Δ_tr H=–15.0±3 kJ mol^–1 at T _tr, T _tr – transition temperature, Δ_tr H – transition enthalpy, S ^Θ – standard entropy, E _A – activation energy. 3. Biologically formed internal shell of Sepia officinalis seems to be composed of ca 96% aragonite and 4% non-crystalline calcium carbonate. This revised version was published online in July 2006 with corrections to the Cover Date.     

On the origin of Turing instability

A reaction–diffusion system consisting of one, two or three chemical species and taking place in an arbitrary number of spatial dimensions cannot exhibit Turing instability if none of the reaction steps express cross‐inhibition. A corollary of this result – obtained by elementary calculations – underlines the importance of nonlinearity in the formation of stationary structures, a kind of self‐organization on a chemical basis. Relations to global stability of reaction–diffusion systems, and results on multispecies systems are also mentioned. The statements are not restricted to mass action type models. As a by‐product, the solution of a basic inverse problem of formal kinetics is also presented which extends a previous result by Hárs and Tóth (1981) to models with arbitrary – including rational – functions as reaction rates so often occurring, e.g., in enzyme kinetics. This revised version was published online in July 2006 with corrections to the Cover Date.     

Influence of Second-Order Lines on the Quantitative Wavelength Dispersive Spectrometry Analysis at Low Accelerating Voltages

The study covers a problem frequently encountered in the quantification of the results of wavelength-dispersive spectrometry (WDS) for the composition analysis of thin films. The characteristics of a Parallel Beam Spectrometer and traditional WDS systems were examined and olivine mineral – (Mg, Fe)₂SiO₄ (O – 44.03 wt%, Mg – 31.1 wt%, Si – 19.56 wt%, Fe – 5.06 wt%, Ni – 0.16 wt%, Mn – 0.09 wt%) was used as a reference material. Low accelerating voltage at 7 kV and beam current 400 nA were applied. Both methods yielded 30–35% of Mn. This is attributed to the overlapping of the MnLα first-order and the MgKα second-order lines. Studies of the influences of the second- and the third-order lines show that the second-order lines from Kα and Lα X-ray counts affected significantly the obtained WDS spectra when the influence of Mα counts was insignificant. Furthermore, the third-order lines did not have a marked effect on the analysis results.     

Resonance light-scattering method for the determination of BSA and HSA with sodium dodecyl benzene sulfonate or sodium lauryl sulfate

A new resonance light-scattering (RLS) assay of proteins such as bovine serum albumin (BSA) and human serum albumin (HSA) is presented. In the medium of phosphoric acid (pH=2.6), the weak RLS of sodium dodecyl benzene sulfonate (SDBS) or sodium lauryl sulfate (SLS) can be greatly enhanced by proteins, owing to interaction between the protein and the anionic surfactant and formation of an associate. The RLS intensity of the SDBS–protein system is stronger than that of the SLS–protein system under same experimental conditions. It is considered that the synergistic resonance caused by the absorption of both protein and SDBS could produce strong RLS, while absorption of protein only in the SLS system could cause relatively weak RLS. The enhanced intensity of RLS is proportional to the concentration of the protein. If SDBS is used as the probe the linear range is 7.5×10^–9–1.5×10^–5 g mL^–1 for BSA and 1.0×10^–8–1.0×10^–5 g mL^–1 for HSA. The detection limits are 1.8 and 2.8 ng mL^–1, respectively. When SLS is used as the probe the linear range is 2.0×10^–8–1.0×10^–5 g mL^–1 and 2.5×10^–8–1.0×10^–5 g mL^–1 for BSA and HSA, respectively, and the detection limits are 12.8 and 21.6 ng mL^–1, respectively. The biological mimics samples are synthetic concoctions of BSA and HSA with some interferents. In these samples, the concentration of interferents is higher than the concentration normally existing in organisms. The samples were determined satisfactorily.     

On the application of the modeling of the relaxation spectrum to the prediction of linear viscoelastic properties of surfactant systems

 In this work, the linear viscoelastic properties of cetyl-trimethylammonium tosilate–water system are predicted by the modeling of the relaxation spectrum. The modeled spectrum of relaxation times is of the “wedge-box” type where the “wedge” portion is located at the short-time scale of relaxation times and the “box” part covers the long-time scale. The linear viscoelastic properties are calculated through the exact relationships with the suggested spectrum. Agreement between the calculated expressions and experimental data of the moduli and the stress relaxation function is found. Comparison is also made with predictions of the empirical expressions of the Cole–Cole and the Williams–Watts models. Received: 17 December 1996 Accepted: 1 July 1997     

A methodological and metabolite identification study of the metabolism of S-carboxymethyl-L-cysteine in man

Summary The analysis of 08:00–16:00 (0–8) hour urine collections following oral S-carboxymethyl-L-cysteine administration of 750 mg to 30 individuals identified S-carboxymethyl-L-cysteine, S-carboxymethyl-L-cysteine S-oxide, S-methyl-L-cysteine and S-methyl-L-cysteine S-oxide as the major urinary drug related compounds. No S-(carboxymethylthio)-L-cysteine mixed disulphide metabolite was found in the 08:00–16:00 hour urine collection but the metabolite was detected in the 16:00–00:00 (8–16) hour urune collection by paper chromatography, TLC and HPLC. The production of the S-oxide metabolites 08:00–16:00 hour urine collection) and the mixed disulphide metabolite (16:00–00:00 hour urine collection) were both shown to be biomodally distributed. A significant linear correlation of the S-oxides recovered following 08:00–16:00 hour urine collection as analysed by paper chromatography, TLC and HPLC is reported.