Mechanistic study of proton transfer and HD exchange in ice films at low temperatures (100-140 K)

We have examined the elementary molecular processes responsible for proton transfer and HD exchange in thin ice films for the temperature range of 100-140 K. The ice films are made to have a structure of a bottom D(2)O layer and an upper H(2)O layer, with excess protons generated from HCl ionization trapped at the D(2)OH(2)O interface. The transport behavior of excess protons from the interfacial layer to the ice film surface and the progress of the HD exchange reaction in water molecules are examined with the techniques of low energy sputtering and Cs(+) reactive ion scattering. Three major processes are identified: the proton hopping relay, the hop-and-turn process, and molecular diffusion. The proton hopping relay can occur even at low temperatures (<120 K), and it transports a specific portion of embedded protons to the surface. The hop-and-turn mechanism, which involves the coupling of proton hopping and molecule reorientation, increases the proton transfer rate and causes the HD exchange of water molecules. The hop-and-turn mechanism is activated at temperatures above 125 K in the surface region. Diffusional mixing of H(2)O and D(2)O molecules additionally contributes to the HD exchange reaction at temperatures above 130 K. The hop-and-turn and molecular diffusion processes are activated at higher temperatures in the deeper region of ice films. The relative speeds of these processes are in the following order: hopping relay>hop and turn>molecule diffusion.     

Molecular dynamics simulations of D2O ice photodesorption

Molecular dynamics (MD) calculations have been performed to study the ultraviolet (UV) photodissociation of D(2)O in an amorphous D(2)O ice surface at 10, 20, 60, and 90 K, in order to investigate the influence of isotope effects on the photodesorption processes. As for H(2)O, the main processes after UV photodissociation are trapping and desorption of either fragments or D(2)O molecules. Trapping mainly takes place in the deeper monolayers of the ice, whereas desorption occurs in the uppermost layers. There are three desorption processes: D atom, OD radical, and D(2)O molecule photodesorption. D(2)O desorption takes places either by direct desorption of a recombined D(2)O molecule, or when an energetic D atom produced by photodissociation kicks a surrounding D(2)O molecule out of the surface by transferring part of its momentum. Desorption probabilities are calculated for photoexcitation of D(2)O in the top four monolayers and are compared quantitatively with those for H(2)O obtained from previous MD simulations of UV photodissociation of amorphous water ice at different ice temperatures [Arasa et al., J. Chem. Phys. 132, 184510 (2010)]. The main conclusions are the same, but the average D atom photodesorption probability is smaller than that of the H atom (by about a factor of 0.9) because D has lower kinetic energy than H, whereas the average OD radical photodesorption probability is larger than that of OH (by about a factor of 2.5-2.9 depending on ice temperature) because OD has higher translational energy than OH for every ice temperature studied. The average D(2)O photodesorption probability is larger than that of H(2)O (by about a factor of 1.4-2.3 depending on ice temperature), and this is entirely due to a larger contribution of the D(2)O kick-out mechanism. This is an isotope effect: the kick-out mechanism is more efficient for D(2)O ice, because the D atom formed after D(2)O photodissociation has a larger momentum than photogenerated H atoms from H(2)O, and D transfers momentum more easily to D(2)O than H to H(2)O. The total (OD + D(2)O) yield has been compared with experiments and the total (OH + H(2)O) yield from previous simulations. We find better agreement when we compare experimental yields with calculated yields for D(2)O ice than when we compare with calculated yields for H(2)O ice.     

Acetone and water on TiO2(110): H/D exchange

Isotopic H/D exchange between coadsorbed acetone and water on the TiO2(110) surface was examined using temperature programmed desorption (TPD) as a function of coverage and two surface pretreatments (O2 oxidation and mild vacuum reduction). Coadsorbed acetone and water interact repulsively on reduced TiO2(110) on the basis of results from the companion paper to this study, with water exerting a greater influence in destabilizing acetone and acetone having only a nominal influence on water. Despite the repulsive interaction between these coadsorbates, about 0.02 monolayers (ML) of a 1 ML d6-acetone on the reduced surface (vacuum annealed at 850 K to a surface oxygen vacancy population of 7%) exhibits H/D exchange with coadsorbed water, with the exchange occurring exclusively in the high-temperature region of the d6-acetone TPD spectrum at approximately 340 K. The effect was confirmed with combinations of d0-acetone and D2O. The extent of exchange decreased on the reduced surface for water coverages above approximately 0.3 ML due to the ability of water to displace coadsorbed acetone from first layer sites to the multilayer. In contrast, the extent of exchange increased by a factor of 3 when surface oxygen vacancies were pre-oxidized with O2 prior to coadsorption. In this case, there was no evidence for the negative influence of high water coverages on the extent of H/D exchange. Comparison of the TPD spectra from the exchange products (either d1- or d5-acetone depending on the coadsorption pairing) suggests that, in addition to the 340 K exchange process seen on the reduced surface, a second exchange process was observed on the oxidized surface at approximately 390 K. In both cases (oxidized and reduced), desorption of the H/D exchange products appeared to be reaction limited and to involve the influence of OH/OD groups (or water formed during recombinative desorption of OH/OD groups) instead of molecularly adsorbed water. The 340 K exchange process is assigned to reaction at step sites, and the 390 K exchange process is attributed to the influence of oxygen adatoms deposited during surface oxidation. The H/D exchange mechanism likely involves an enolate or propenol surface intermediate formed transiently during the desorption of oxygen-stabilized acetone molecules.     

Surface Charges at the CaF2/Water Interface Allow Very Fast Intermolecular Vibrational‐Energy Transfer

We investigate the dynamics of water in contact with solid calcium fluoride, where at low pH, localized charges can develop upon fluorite dissolution. We use 2D surface‐specific vibrational spectroscopy to quantify the heterogeneity of the interfacial water (D₂O) molecules and provide information about the sub‐picosecond vibrational‐energy‐relaxation dynamics at the buried solid/liquid interface. We find that strongly H‐bonded OD groups, with a vibrational frequency below 2500 cm^?1, display very rapid spectral diffusion and vibrational relaxation; for weakly H‐bonded OD groups, above 2500 cm^?1, the dynamics slows down substantially. Atomistic simulations based on electronic‐structure theory reveal the molecular origin of energy transport through the local H‐bond network. We conclude that strongly oriented H‐bonded water molecules in the adsorbed layer, whose orientation is pinned by the localized charge defects, can exchange vibrational energy very rapidly due to the strong collective dipole, compensating for a partially missing solvation shell.     

Wetting of mixed OHH(2)O layers on Pt(111)

We describe the effect of growth temperature and OHH(2)O composition on the wetting behavior of Pt(111). Changes to the desorption rate of ice films were measured and correlated to the film morphology using low energy electron diffraction and thermal desorption of chloroform to measure the area of multilayer ice and monolayer OHH(2)O exposed. Thin ice films roughen, forming bare (radical39 x radical39)R16 degrees water monolayer and ice clusters. The size of the clusters depends on growth temperature and determines their kinetic stability, with the desorption rate decreasing when larger clusters are formed by growth at high temperature. Continuous films of more than approximately 50 layers thick stabilize an ordered incommensurate ice film that does not dewet. OH coadsorption pins the first layer into registry with Pt, forming an ordered hexagonal (OH+H(2)O) structure with all the H atoms involved in hydrogen bonding. Although this layer has a similar honeycomb OH(x) skeleton to ice Ih, it is unable to reconstruct to match the bulk ice lattice parameter and does not form a stable wetting layer. Water aggregates to expose bare monolayer (OH+H(2)O), forming bulk ice crystallites whose size depend on preparation temperature. Increasing the proportion of water in the first layer provides free OH groups which stabilize the multilayer. The factors influencing multilayer wetting are discussed using density functional theory calculations to compare water adsorption on top of (OH+H(2)O) and on simple models for commensurate water structures. We show that both the (OH+H(2)O) structure and "H-down" water layers are poor proton acceptors, bonding to the first layer being enhanced by the presence of free OH groups. Formation of an ordered ice multilayer requires a water-metal interaction sufficient to wet the surface, but not so strong as to prevent the first layer relaxing to stabilize the interface between the metal and bulk ice.     

H/D isotopic exchange in water interactions with the ferroelectric copolymer: Poly(vinylidene fluoride-trifluoroethylene) (70%:30%)

For both water and heavy water adsorption and absorption on crystalline poly(vinylidene fluoride with trifluoroethylene (30%)), P(VDF-TrFE 70:30), two distinctly different adsorption sites have been identified by thermal desorption spectroscopy. One adsorbed water species resembles ice and there is also an absorbed water species that interacts more strongly with the polymer thin film, and in addition, there is a polymer surface (polymer to ice interface) water species. We find that there is H/D exchange between the water or heavy water molecules and the ferroelectric polymer (largely -(CH2-CF2)-), particularly at the polymer surface.     

H/D isotopic exchange between water molecules at ice surfaces

H/D isotopic exchange between H(2)O and D(2)O molecules was studied at the surface of ice films at 90-140 K by the technique of Cs(+) reactive ion scattering. Ice films were deposited on a Ru(0001) substrate in different compositions of H(2)O and D(2)O and in various structures to study the kinetics of isotopic exchange. H/D exchange was very slow on an ice film at 95-100 K, even when H(2)O and D(2)O were uniformly mixed in the film. At 140 K, H/D exchange occurred in a time scale of several minutes on the uniform mixture film. Kinetic measurement gave the rate coefficient for the exchange reaction, k(140 K)=1.6(+/-0.3) x 10(-19) cm(2) molecule(-1) s(-1) and k(100 K)< or =5.7(+/-0.5) x 10(-21) cm(2) molecule(-1) s(-1) and the Arrhenius activation energy, E(a)> or =9.8 kJ mol(-1). Addition of HCl on the film to provide excess protons greatly accelerated the isotopic exchange reaction such that it went to completion very quickly at the surface. The rapid reaction, however, was confined within the first bilayer (BL) of the surface and did not readily propagate to the underlying sublayer. The isotopic exchange in the vertical direction was almost completely blocked at 95 K, and it slowly occurred only to a depth of 3 BLs from the surface at 140 K. Thus, the proton transfer was highly directional. The lateral proton transfer at the surface was attributed to the increased mobility of protonic defects at the molecularly disordered and activated surface. The slow, vertical proton transfer was probably assisted by self-diffusion of water molecules.     

Diffusion of HDO in pure and acid-doped ice films

In these experiments, a few bilayers of D(2)O were vapor-deposited on a pure crystalline H(2)O ice film or an ice film doped with a small amount of HCl. Upon deposition, H/D isotopic exchange quickly converted the D(2)O layer into an HDO-rich mixture layer. Infrared absorption spectroscopy followed the changes of the HDO from the initial HDO mixture layer to HDO isolated in the H(2)O ice film. This was possible because isolated HDO in H(2)O ice has a unique, sharp peak in the O-D stretch region that can be distinguished from the broad peak due to the initial HDO mixture layer. The absorbance of isolated HDO displayed first-order kinetics and was attributed to diffusion of HDO from the HDO-rich mixture layer into the underlying H(2)O ice film. While negligible diffusion was observed for pure ice films and for ice films with HCl concentrations up to 1 x 10(-4) mole fraction, diffusion of HDO occurred for higher concentrations of (2-20) x 10(-4) mole fraction HCl with a concentration-independent rate constant. The diffusion under these conditions followed Arrhenius behavior for T = 135-145 K yielding E(a) = 25 +/- 5 kJ/mol. The mechanism for the HDO diffusion involves either (i) molecular self-diffusion or (ii) long-range H/D diffusion by a series of multiple proton hop and orientational turn steps. While these spectroscopic results compare favorably with recent studies of molecular self-diffusion in low-temperature ice films, the diffusion results from all the ice film studies at low temperatures (ca. T < 170 K) differ from earlier bulk ice studies at higher temperatures (ca. T > 220 K). A comparison and discussion of the various diffusion studies are included in this report.     

Surface abundance change in vacuum ultraviolet photodissociation of CO2 and H2O mixture ices

Photodissociation of amorphous ice films of carbon dioxide and water co-adsorbed at 90 K was carried out at 157 nm using oxygen-16 and -18 isotopomers with a time-of-flight photofragment mass spectrometer. O((3)P(J)) atoms, OH (v = 0) radicals, and CO (v = 0,1) molecules were detected as photofragments. CO is produced directly from the photodissociation of CO(2). Two different adsorption states of CO(2), i.e., physisorbed CO(2) on the surface of amorphous solid water and trapped CO(2) in the pores of the film, are clearly distinguished by the translational and internal energy distributions of the CO molecules. The O atom and OH radical are produced from the photodissociation of H(2)O. Since the absorption cross section of CO(2) is smaller than that of H(2)O at 157 nm, the CO(2) surface abundance is relatively increased after prolonged photoirradiation of the mixed ice film, resulting in the formation of a heterogeneously layered structure in the mixed ice at low temperatures. Astrophysical implications are discussed.     

Proton transfer and the mobilities of the H+ and OH- ions from studies of a dissociating model for water

Hydrogen (H(+)) and hydroxide (OH(-)) ions in aqueous solution have anomalously large diffusion coefficients, and the mobility of the H(+) ion is nearly twice that of the OH(-) ion. We describe molecular dynamics simulations of a dissociating model for liquid water based on scaling the interatomic potential for water developed by Ojama?e-Shavitt-Singer from ab initio studies at the MP2 level. We use the scaled model to study proton transfer that occurs in the transport of hydrogen and hydroxide ions in acidic and basic solutions containing 215 water molecules. The model supports the Eigen-Zundel-Eigen mechanism of proton transfer in acidic solutions and the transient hyper-coordination of the hydroxide ion in weakly basic solutions at room temperature. The free energy barriers for proton transport are low indicating significant proton delocalization accompanying proton transfer in acidic and basic solutions. The reorientation dynamics of the hydroxide ion suggests changes in the proportions of hyper-coordinated species with temperature. The mobilities of the hydrogen and hydroxide ions and their temperature dependence between 0 and 50 °C are in excellent agreement with experiment and the reasons for the large difference in the mobilities of the two ions are discussed. The model and methods described provide a novel approach to studies of liquid water, proton transfer, and acid-base reactions in aqueous solutions, channels, and interfaces.     

Effect of humidity on the interaction of dimethyl methylphosphonate (DMMP) vapor with SiO2 and Al2O3 surfaces, studied using infrared attenuated total reflection spectroscopy

Infrared attenuated total reflection spectroscopy has been used to study the interaction of DMMP vapor with SiO(2), Al(2)O(3), and AlO(OH) vs relative humidity (RH) and DMMP partial pressure (P/P(0)). For SiO(2) the growth with increasing RH of ice-like and liquid-like layers is seen in agreement with previous work. H?D exchange during exposure to H(2)O and D(2)O indicates that the ice-like layer is more resistant to exchange, consistent with stronger H-bonding than in the liquid-like layer. Exposure of nominally dry SiO(2) to D(2)O indicates the existence of adsorbed H(2)O that does not exhibit an ice-like spectrum. The ice-like layer appears only at a finite RH. Exposure of SiO(2) to DMMP in the absence of intentionally added H(2)O shows the formation of a strongly bound molecular species followed by a liquid-like layer. The strong interaction involves SiO-H···O═P bonds to surface silanols and/or HO-H···O═P bonds to preadsorbed molecular H(2)O. At a finite RH the ice-like layer forms on SiO(2) even in the presence of DMMP up to P/P(0) = 0.30. DMMP does not appear to penetrate the ice-like layer under these conditions, and the tendency to form a such a layer drives the displacement of DMMP. Amorphous Al(2)O(3) and AlO(OH) do not exhibit an ice-like H(2)O layer. Both have a higher surface OH content than does SiO(2), which leads to higher coverages of H(2)O or DMMP at equivalent RH or P/P(0). At low P/P(0), for which adsorption is dominated by Al-OH···O═P bonding, a-Al(2)O(3) interacts with DMMP more strongly than does AlO(OH) as a result of the higher acidity of OH sites on the former. Up to RH = 0.30 and P/P(0) = 0.30, DMMP appears to remain bonded to the surface rather than being displaced by H(2)O. H(2)O appears to have little or no effect on the total amount of DMMP adsorbed on any of these surfaces, up to an RH of 0.30 and a P/P(0) of 0.30. The results have implications for the transport of DMMP and related molecules on oxide surfaces in the environment.     

Sodium interacting with amorphous water films at 10 and 100 k

In the present study, we compare the adsorption of Na on amorphous D(2)O ice films, held at 10 and 100 K. OH, D(2)O, and Na are easily distinguished by their characteristic signatures in metastable impact electron spectroscopy (MIES). It is found that at 10 K substrate temperature the donation of 3sNa charge to the ice film, which is regarded as a precursor for water deprotonation, is significantly reduced relative to 100 K. This observation is discussed on the basis of recent theoretical work, suggesting that a rearrangement of the water molecules at the outermost water surface is the prerequisite for hydration/solvation of the 3sNa electron in the water ice bulk. The MIES spectra, showing spectral features from both OH and D(2)O, can be interpreted as reflecting the composition of the Na-water complexes in the near surface region. The relative intensity of the OH and D(2)O features is the same for 10 and 100 K. This finding suggests that two different sites for Na adsorption exist, one on the perfect water network and the other at OH dangling bond sites whereby, at 10 K, only the latter one leads to deprotonation of D(2)O. Finally, charge exchange phenomena observed when applying electron spectroscopies to ice films are discussed.     

Ionization and solvation of HCl adsorbed on the D2O-ice surface

The interaction of HCl with the D(2)O-ice surface has been investigated in the temperature range 15-200 K by utilizing time-of-flight secondary ion mass spectroscopy, temperature-programmed desorption, and x-ray photoelectron spectroscopy. The intensities of sputtered H(+)(D(2)O) and Cl(-) ions (the H(+) ions) are increased (decreased) markedly above 40 K due to the hydrogen bond formation between the HCl and D(2)O molecules. The HCl molecules which form ionic hydrates undergo H/D exchange at 110-140 K and a considerable fraction of them dissolves into the bulk above 140 K. The neutral hydrates of HCl should coexist as evidenced by the desorption of HCl above 170 K. They are incorporated completely in the D(2)O layer up to 140 K. The HCl molecules embedded in the thick D(2)O layer dissolve into the bulk, and the ionic hydrate tends to segregate to the surface above 150 K.     

Surfactant control of gas uptake: effect of butanol films on HCl and HBr entry into supercooled sulfuric acid

The entry of HCl into 60-68 wt % D(2)SO(4) and HBr into 68 wt % acid containing 0-0.18 M 1-butanol was monitored by measuring the fractions of impinging HCl and HBr molecules that desorb as DCl and DBr after undergoing H --> D exchange within the deuterated acid. The addition of 0.18 M butanol to the acid creates butyl films that reach approximately 80% surface coverage at 213 K. Surprisingly, this butyl film does not impede exchange but instead enhances it: the HCl --> DCl exchange fractions increase from 0.52 to 0.74 for 60 wt % D(2)SO(4) and from 0.14 to 0.27 for 68 wt % D(2)SO(4). HBr --> DBr exchange increases even more sharply, rising from 0.22 to 0.65 for 68 wt % D(2)SO(4). We demonstrate that this enhanced exchange corresponds to enhanced uptake into the butyl-coated acid for HBr and infer this equivalence for HCl. In contrast, the entry probability of the basic molecule CF(3)CH(2)OH exceeds 0.85 at all acid concentrations and is only slightly diminished by the butyl film. The OD groups of surface butanol molecules may assist entry by providing extra interfacial protonation sites for HCl and HBr dissociation. The experiments suggest that short-chain surfactants in sulfuric acid aerosols do not hinder heterogeneous reactions of HCl or HBr with other solute species.     

Ba3[Ge2B7O16(OH)2](OH)(H2O) and Ba3Ge2B6O16: novel alkaline-earth borogermanates based on two types of polymeric borate units and GeO4 tetrahedra

Two new barium borogermanates with two types of novel structures, namely, Ba(3)[Ge(2)B(7)O(16)(OH)(2)](OH)(H(2)O) and Ba(3)Ge(2)B(6)O(16), have been synthesized by hydrothermal or high-temperature solid-state reactions. They represent the first examples of alkaline-earth borogermanates. Ba(3)[Ge(2)B(7)O(16)(OH)(2)](OH)(H(2)O) crystallized in a polar space group Cc. Its structure features a novel three-dimensional anionic framework composed of [B(7)O(16)(OH)(2)](13-) polyanions that are bridged by Ge atoms with one-dimensional (1D) 10-membered-ring (MR) tunnels along the b axis. The Ba(II) cations, hydroxide ions, and water molecules are located at the above tunnels. Ba(3)Ge(2)B(6)O(16) crystallizes in centrosymmetric space group P1. Its structure exhibits a thick layer composed of circular B(6)O(16) units connected by GeO(4) tetrahedra via corner sharing, forming 1D 4- and 6-MR tunnels along the c axis. Ba1 ions reside in the tunnels of the 6-MRs, whereas Ba2 ions are located at the interlayer space. Both compounds feature new types of topological structures. Second-harmonic-generation (SHG) measurements indicate that Ba(3)[Ge(2)B(7)O(16)(OH)(2)](OH)(H(2)O) displays a weak SHG response of about 0.3 times that of KH(2)PO(4). Optical, thermal stability, and ferroelectric properties as well as theoretical calculations have also been performed.     

Ions generated from uranyl nitrate solutions by electrospray ionization (ESI) and detected with fourier transform ion-cyclotron resonance (FT-ICR) mass spectrometry

Electrospray ionization (ESI) of uranyl nitrate solutions generates a wide variety of positively and negatively charged ions, including complex adducts of uranyl ions with methoxy, hydroxy, and nitrate ligands. In the positive ion mode, ions detected by Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry are sensitive to instrumental tuning parameters such as quadrupole operating frequency and trapping time. Positive ions correspond to oligomeric uranyl nitrate species that can be characterized as having a general formula of [(UO(2))(n)(A)(m)(CH(3)OH)(s)](+) or [(UO(2))(n)(O)(A)(m)(CH(3)OH)(s)](+) with n = 1-4, m = 1-7, s = 0 or 1, and A = OH, NO(3), CH(3)O or a combination of these, although the formation of NO(3)-containing species is preferred. In the negative ion mode, complexes of the form [(UO(2))(NO(3))(m)](-) (m = 1-3) are detected, although the formation of the oxo-containing ions [(UO(2))(O)(n)(NO(3))(m)](-) (n = 1-2, m = 1-2) and the hydroxy-containing ions [(UO(2))(OH)(n)(NO(3))(m)](-) (n = 1-2, m = 0-1) are also observed. The extent of coordinative unsaturation of both positive and negative ions can be determined by ligand association/exchange and H/D exchange experiments using D(2)O and CD(3)OD as neutral reaction partners in the gas-phase. Positive ions are of varying stability and reactivity and may fragment extensively upon collision with D(2)O, CD(3)OD and N(2) in sustained off-resonance irradiation/collision-induced dissociation (SORI-CID) experiments. Electron-transfer reactions, presumably occurring during electrospray ionization but also in SORI-CID, can result in reduction of U(VI) to U(V) and perhaps even U(IV).     

Spectroscopic Monitoring of the Acidity of Water Films on Ru(0001): Orientation‐Specific Acidity of Adsorbed Water

We examined the acid–base properties of water films adsorbed onto a Ru(0001) substrate by using surface spectroscopic methods in vacuum environments. Ammonia adsorption experiments combined with low‐energy sputtering (LES), reactive ion scattering (RIS), reflection–absorption infrared spectroscopy (RAIRS) and temperature‐programmed desorption (TPD) measurements showed that the adsorbed water is acidic enough to transfer protons to ammonia. Only the water molecules in an intact water monolayer and water clusters larger than the hexamer exhibit such acidity, whereas small clusters, a thick ice film or a partially dissociated water monolayer that contains OH, H₂O and H species are not acidic. The observations indicate the orientation‐specific acidity of adsorbed water. The acidity stems from water molecules with H‐down adsorption geometry present in the monolayer. However, the dissociation of water into H and OH on the surface does not promote but rather suppresses the proton transfer to ammonia.     

Interaction of methanol with amorphous solid water

The interaction of methanol (MeOH) with amorphous solid water (ASW) composed of D2O molecules, prepared at 125 K on a polycrystalline Ag substrate, was studied with metastable-impact-electron spectroscopy, reflection-absorption infrared spectroscopy, and temperature-programmed desorption mass spectroscopy. In connection with the experiments, classical molecular dynamics (MD) simulations have been performed on a single CH3OH molecule adsorbed at the ice surface (T=190 K), providing further insights into the binding and adsorption properties of the molecule at the ice surface. Consistently with the experimental deductions and previous studies, MeOH is found to adsorb with the hydroxyl group pointing toward dangling bonds of the ice surface, the CH3 group being oriented upwards, slightly tilted with respect to the surface normal. It forms the toplayer up to the onset of the simultaneous desorption of D2O and MeOH. At low coverage the adsorption is dominated by the formation of two strong hydrogen bonds as evidenced by the MD results. During the buildup of the first methanol layer on top of an ASW film the MeOH-MeOH interaction via hydrogen-bond formation becomes of importance as well. The interaction of D2O with solid methanol films and the codeposition of MeOH and D2O were also investigated experimentally; these experiments showed that D2O molecules supplied to a solid methanol film become embedded into the film.     

Vertical diffusion of water molecules near the surface of ice

We studied diffusion of water molecules in the direction perpendicular to the surface of an ice film. Amorphous ice films of H(2)O were deposited on Ru(0001) at temperature of 100-140 K for thickness of 1-5 bilayer (BL) in vacuum, and a fractional coverage of D(2)O was added onto the surface. Vertical migration of surface D(2)O molecules to the underlying H(2)O multilayer and the reverse migration of H(2)O resulted in change of their surface concentrations. Temporal variation of the H(2)O and D(2)O surface concentrations was monitored by the technique of Cs(+) reactive ion scattering to reveal kinetics of the vertical diffusion in depth resolution of 1 BL. The first-order rate coefficient for the migration of surface water molecules ranged from k(1)=5.7(+/-0.6) x 10(-4) s(-1) at T=100 K to k(1)=6.7(+/-2.0) x 10(-2) s(-1) at 140 K, with an activation energy of 13.7+/-1.7 kJ mol(-1). The equivalent surface diffusion coefficients were D(s)=7 x 10(-19) cm(2) s(-1) at 100 K and D(s)=8 x 10(-17) cm(2) s(-1) at 140 K. The measured activation energy was close to interstitial migration energy (15 kJ mol(-1)) and was much lower than diffusion activation energy in bulk ice (52-70 kJ mol(-1)). The result suggested that water molecules diffused via the interstitial mechanism near the surface where defect concentrations were very high.