Design,synthesis, and self‐assembly manipulating of polymerized ionic liquids contained imidazolium based on “Jacketing” effect

A series of novel polymerized ionic liquids (PILs) contained imidazolium, poly (2,5‐bis{[6‐(1‐butyl‐3′‐imidazolium)hexyl] oxy carbonyl}styrene salts) (denoted as P1? X^?, X^??Br^?, BF₄^?, PF₆^? and TFSI^?) were successfully synthesized via radical polymerization. The chemical structures of the monomers and their corresponding PILs were confirmed by ¹H NMR, ¹³C NMR, and Fourier transform infrared spectroscopy. Thermogravimetric analysis results showed that these PILs had excellent thermal stability. The phase transitions and liquid‐crystalline (LC) behaviors of these polymers were investigated by differential scanning calorimetry, polarized light microscopy (PLM), and wide‐angle X‐ray diffraction. The combined experimental results showed that all the PILs could form hexagonal columnar (?H) LC ordered structures because of the strong interaction between the anions and cations in the side groups except for P1? TFSI^?. The conductivities of monomers and PILs were sketchily investigated, and monomers had higher conductivities than those of conprespoding PILs. For comparison, we have synthesized a polymer without counter‐anion, but similar to the chemical structure of P1? X^?, poly (2, 5‐bis{[6‐(4‐butoxy‐4′‐oxy phenyl) hexyl] oxycarbonyl} styrene) (denoted as P2). In this case, phenyl took place of imidazolium of side chain, and LC ordered structure did not form. The comparison between P1? X^? and P2 suggested that ion played an important role in the constructing of LC ordered structure. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Experimental nibble for computational chemists: On the construction and CO2 capture by different zeolite imidazole ester framework-8 and ionic

The combination of zeolitic imidazolate framework-8 (ZIF-8) and ionic liquids (ILs) to create porous ionic liquids (PILs) is highly significant for efficient carbon dioxide (CO₂) capture and the advancement of carbon capture, utilization, and storage (CCUS) technologies. To further investigate the CO₂ capture characteristics of different PILs, two different-sized ZIF-8 structures and two functionalized ILs were prepared. Additionally, the enhancement factor of the reaction process was calculated using the dual-film theory and mass transfer coefficient. The results demonstrated that the original [PMIm]Cl had low CO₂ absorption capacity at ambient temperature and pressure, whereas the functionalized ILs had a maximum CO₂ capture capacity of approximately .31 mol/mol, with the 20 wt% concentration of tetraethylene pentamine-2-methylimidazole ([TEP][MIm]) exhibiting the highest CO₂ capture capacity of around 1.93 mol/mol. The synthesized PILs demonstrated a maximum CO₂ capture capacity of approximately 2.22 and 2.16 mol/mol at 20 and 10 wt% ionic concentrations, respectively, with a porous ionic liquid addition of 1.0/100 g. The corresponding enhancement factors were 1.53 and 1.59, respectively. These findings have significant implications for CCUS technology.     

MIL‐53(Al) as a Versatile Platform for Ionic‐Liquid/MOF Composites to Enhance CO2 Selectivity over CH4 and N2

Five different imidazolium‐based ionic liquids (ILs) were incorporated into a metal–organic framework (MOF), MIL‐53(Al), to investigate the effect of IL incorporation on the CO₂ separation performance of MIL‐53(Al). CO₂, CH₄, and N₂ adsorption isotherms of the IL/MIL‐53(Al) composites and pristine MIL‐53(Al) were measured to evaluate the effect of the ILs on the CO₂/CH₄ and CO₂/N₂ selectivities of the MOF. Of the composite materials that were tested, [BMIM][PF₆]/MIL‐53(Al) exhibited the largest increase in CO₂/CH₄ selectivity, 2.8‐times higher than that of pristine MIL‐53(Al), whilst [BMIM][MeSO₄]/MIL‐53(Al) exhibited the largest increase in CO₂/N₂ selectivity, 3.3‐times higher than that of pristine MIL‐53(Al). A comparison of the CO₂ separation potentials of the IL/MOF composites showed that the [BMIM][BF₄]‐ and [BMIM][PF₆]‐incorporated MIL‐53(Al) composites both showed enhanced CO₂/N₂ and CO₂/CH₄ selectivities at pressures of 1–5 bar compared to composites of CuBTC and ZIF‐8 with the same ILs. These results demonstrate that MIL‐53(Al) is a versatile platform for IL/MOF composites and could help to guide the rational design of new composites for target gas‐separation applications.     

Optimizing the electrochemical performance of imidazolium‐based polymeric ionic liquids by varying tethering groups

We report the synthesis and characterization of a series of novel imidazolium cation and bis(trifluoromethane)sulfonimide anion (TFSI^?)‐based ionic liquid (IL) model compounds and their corresponding polymeric ionic liquids (PILs) with various tethering groups. Ethylene oxide repeating units were attached as tethering groups to an imidazolium cation to optimize the glass transition temperatures (T_g) and ionic conductivities of the PILs. The novel PILs exhibit excellent conductivity values of around 8 × 10^?4 S/cm at room temperature. The thermophysical and electrochemical properties of ILs, including thermal transition, ionic conductivity, and rheological behavior, were characterized to investigate the effect of tethering groups. We conclude that the length of poly(ethylene oxide) tethering group has a tremendous effect on both physical property and electrochemical behavior and that charge carrier density is dominant in defining ionic conductivity with free ILs, whereas ion mobility plays a more important role after polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1339–1350     

Poly(ionic liquid)s as new materials for CO2 absorption

A series of imidazolium‐based ionic liquid monomers and their corresponding polymers (poly(ionic liquid)s) were synthesized, and their CO₂ sorption was studied. The poly(ionic liquid)s had enhanced CO₂ sorption capacities and fast sorption/desorption rates compared with room temperature ionic liquids. The effects of the chemical structures, including the types of anion, cation, and backbone of the poly(ionic liquid)s on their CO₂ sorption have been discussed. In contrast to room temperature ionic liquids, the polymer with PF anions had the highest CO₂‐sorption capacity, while those with BF or Tf₂N^? anions had the same capacities. The CO₂ sorption and desorption of the polymers were fast and reversible, and the sorption was selective over H₂, N_2, and O₂. The measured Henry's constants of P[VBBI][BF₄] and P[MABI][BF₄] were 26.0 bar and 37.7 bar, which were lower than those of similar room temperature ionic liquids. The preliminary study of the mechanism indicated that the CO₂ sorption of the polymer particles was more absorption (the bulk) but less adsorption (the surface). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5477–5489, 2005     

Capsules with polyurea shells and ionic liquid cores for CO2 capture

Many ionic liquids (ILs) have good solubilities of CO₂ but the high viscosity of ILs makes them cumbersome and kinetically limits gas uptake. Encapsulation of ILs is an effective approach to overcoming these limitations. In capsules with a core of IL, the chemical composition of the shell impacts performance. Here, we report the preparation of capsules with a core of the IL [Bmim][PF₆] and polymer composite shell, then evaluate how the identity of the polymer impacts CO₂ uptake. IL-in-oil Pickering emulsions stabilized by nanosheets are used, with capsules formed by interfacial polymerization between different diamines and diisocyanates (e.g., shells are polyurea and nanosheets). The capsules contain 60–80 wt% IL and the composition was verified using Fourier transform infrared spectroscopy. Optical microscopy, scanning electron microscopy, and particle sizing data showed spherical, discrete capsules with 50–125 μm in diameter. All capsules are stable up to 250°C. Brunauer–Emmett–Teller analysis of CO₂ gas uptake data showed that different polymer compositions led to different CO₂ uptake properties, with capacity ranging from 0.065 to 0.025 moles of CO₂/kg sorbent at 760 torr and 20°C. This work demonstrates that the polymer identity of the shell impacts gas uptake properties and supports that shell composition can tailor performance.     

Encapsulated Ionic Liquids for CO2 Capture: Using 1‐Butyl‐methylimidazolium Acetate for Quick and Reversible CO2 Chemical Absorption.

The potential advantages of applying encapsulated ionic liquid (ENIL) to CO₂ capture by chemical absorption with 1‐butyl‐3‐methylimidazolium acetate [bmim][acetate] are evaluated. The [bmim][acetate]‐ENIL is a particle material with solid appearance and 70 % w/w in ionic liquid (IL). The performance of this material as CO₂ sorbent was evaluated by gravimetric and fixed‐bed sorption experiments at different temperatures and CO₂ partial pressures. ENIL maintains the favourable thermodynamic properties of the neat IL regarding CO₂ absorption. Remarkably, a drastic increase of CO₂ sorption rates was achieved using ENIL, related to much higher contact area after discretization. In addition, experiments demonstrate reversibility of the chemical reaction and the efficient ENIL regeneration, mainly hindered by the unfavourable transport properties. The common drawback of ILs as CO₂ chemical absorbents (low absorption rate and difficulties in solvent regeneration) are overcome by using ENIL systems.     

Computer‐Assisted Design of Imidazolate‐Based Ionic Liquids for Improving Sulfur Dioxide Capture,Carbon Dioxide Capture,and Sulfur Dioxide/Carbon Dioxide Selectivity

A new strategy involving the computer‐assisted design of substituted imidazolate‐based ionic liquids (ILs) through tuning the absorption enthalpy as well as the basicity of the ILs to improve SO₂ capture, CO₂ capture, and SO₂/CO₂ selectivity was explored. The best substituted imidazolate‐based ILs as absorbents for different applications were first predicted. During absorption, high SO₂ capacities up to ≈5.3 and 2.4 mol mol_IL⁻¹ could be achieved by ILs with the methylimidazolate anions under 1.0 and 0.1 bar (1 bar=0.1 MPa), respectively, through tuning multiple N ⋅⋅⋅ S interactions between SO₂ and the N atoms in the imidazolate anion with different substituents. In addition, CO₂ capture by the imidazolate‐based ILs could also be easily tuned through changing the substituents of the ILs, and 4‐bromoimidazolate IL showed a high CO₂ capacity but a low absorption enthalpy. Furthermore, a high selectivity for SO₂/CO₂ could be reached by IL with 4,5‐dicyanoimidazolate anion owing to its high SO₂ capacity but low CO₂ capacity. The results put forward in this work are in good agreement with the predictions. Quantum‐chemical calculations and FTIR and NMR spectroscopy analysis methods were used to discuss the SO₂ and CO₂ absorption mechanisms.     

Systematic Investigation of the Photopolymerization of Imidazolium-Based Ionic Liquid Styrene and Vinyl Monomers

The use of ionic liquids (ILs) as media in radical polymerizations has demonstrated the ability of these unique solvents to improve both reaction kinetics and polymer product properties. However, the bulk of these studies have examined the polymerization behavior of common organic monomers (e.g., methyl methacrylate, styrene) dissolved in conventional ILs. There is increasing interest in polymerized ILs (poly(ILs)), which are ionomers produced from the direct polymerization of styrene-, vinyl-, and acrylate-functionalized ILs. Here, the photopolymerization kinetics of IL monomers are investigated for systems in which styrene or vinyl functionalities are pendant from the imidazolium cation. Styrene-functionalized IL monomers typically polymerized rapidly (full conversion ≤1 min) in both neat compositions or when diluted with a nonpolymerizable IL, [C₂mim][Tf₂N]. However, monomer conversion in vinyl-functionalized IL monomers is much more dependent on the nature of the nonpolymerizable group. ATR-FTIR analysis and molecular simulations of these monomers and monomer mixtures identified the presence of multiple intermolecular interactions (e.g., π–π stacking, IL aggregation) that contribute to the polymerization behaviors of these systems. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2364–2375     

Measurement and Correlation of the Ionic Conductivity of Ionic Liauid-Molecular Solvent Solutions

The ionic conductivity of the solutions formed from 1-n-butyl-3-methylimidazolium tetrafluoroborate （[Bmim][BF4]） or 1-n-butyl-3-methylimidazolium hexafluorophosphate （[Bmim][PF6]） and different molecular solvents （MSs） were measured at 298.15 K. The molar conductivity of the ionic liquids （ILs） increased dramatically with increasing concentration of the MSs. It was found that the molar conductivity of the IL in the solutions studied in this work could be well correlated by the molar conductivity of the neat ILs and the dielectric constant and molar volume of the MSs.     

Atom transfer radical polymerization of styrenic ionic liquid monomers and carbon dioxide absorption of the polymerized ionic liquids

Polymeric forms of ionic liquids have many potential applications because of their high thermal stability and ionic nature. Two ionic liquid monomers, 1‐(4‐vinylbenzyl)‐3‐butyl imidazolium tetrafluoroborate (VBIT) and 1‐(4‐vinylbenzyl)‐3‐ butyl imidazolium hexafluorophosphate (VBIH), were synthesized through the quaternization of N‐butylimidazole with 4‐vinylbenzylchloride and a subsequent anion‐ exchange reaction with sodium tetrafluoroborate or potassium hexafluorophosphate. Copper‐mediated atom transfer radical polymerization was used to polymerize VBIT and VBIH. The effects of various initiator/catalyst systems, monomer concentrations, solvent polarities, and reaction temperatures on the polymerization were examined. The polymerization was well controlled and exhibited living characteristics when CuBr/1,1,4,7,10,10‐hexamethyltriethylenetetramine or CuBr/2,2′‐bipyridine was used as the catalyst and ethyl 2‐bromoisobutyrate was used as the initiator. Characterizations by thermogravimetric analysis, differential scanning calorimetry, and X‐ray diffraction showed that the resulting VBIT polymer, poly[1‐(4‐vinylbenzyl)‐3‐butyl imidazolium tetrafluoroborate] (PVBIT), was amorphous and had excellent thermal stability, with a glass‐transition temperature of 84 °C. The polymerized ionic liquids could absorb CO₂ as ionic liquids: PVBIT absorbed 0.30% (w/w) CO₂ at room temperature and 0.78 atm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1432–1443, 2005     

Significant Improvements in CO2 Capture by Pyridine‐Containing Anion‐Functionalized Ionic Liquids through Multiple‐Site Cooperative Interactions

A strategy for improving CO₂ capture by new anion‐functionalized ionic liquids (ILs) making use of multiple site cooperative interactions is reported. An extremely high capacity of up to 1.60 mol CO₂ per mol IL and excellent reversibility were achieved by introducing a nitrogen‐based interacting site on the phenolate and imidazolate anion. Quantum‐chemical calculations, spectroscopic investigations, and calorimetric data demonstrated that multiple‐site cooperative interactions between two kinds of interacting sites in the anion and CO₂ resulted in superior CO₂ capacities, which originated from the π‐electron delocalization in the pyridine ring.     

DFT Study of the Geometrical and Electronic Structures of Geminal Dicationic Ionic Liquids 1,3‐Bis[3‐methylimidazolium‐1‐yl]hexane Halides

In this work, the geometrical and electronic properties of the mono cationic ionic liquid 1‐hexyl‐3‐methylimidazolium halides ([C₆(mim)]⁺_X^?, X=Cl, Br and I) and dicationic ionic liquid 1,3‐bis[3‐methylimidazolium‐1‐yl]hexane halides ([C₆(mim)₂X₂], X=Cl, Br and I) were studied using the density functional theory (DFT). The most stable conformer of these two types ionic liquids (IL) are determined and compared with each other. Results show that in the most stable conformers, in both monocationic ILs and dicationic ILs, the Cl^? and Br^? anions prefer to locate almost in the plane of the imidazolium ring whereas the I^? anion prefers nearly vertical location respect to the imidazolium ring plan. Comparison of hydrogen bonding and ionic interactions in these two types of ionic liquids reveals that these ionic liquids can be formed hydrogen bond by Cl^? and Br^? anion. The calculated thermodynamic functions show that the interaction of cation — anion pair in the dicationic ionic liquids are more than monocationic ionic liquids and these interactions decrease with increasing the halide anion atomic weight.     

Imidazolium ionic liquids with short polyoxyethylene chains

It has been observed by us earlier that imidazolium ionic liquids ([bmim][BF₄] react with paraformaldehyde giving in nearly quantitative yield imidazolium ionic liquids substituted at 2‐position with hydroxymethyl group ([bhmim][BF₄]). In this article, we describe the application of those ionic liquids (after converting hydroxyl group into alkoxide anion by reaction with sodium hydride) as initiators for anionic polymerization of ethylene oxide (EO). Up to DP_n ～ 30 polymerization proceeds without side reactions, and the product is exclusively low‐molecular‐weight polyoxyethylene containing imidazolium head group (POE‐IL) with DP_n equal to [EO]/[bhmim] ratio. By increasing [EO]/[bhmim] ratio further, side reaction start to interfere, and macromolecules that does not contain imidazolium head groups are also formed, as evidenced by analysis of MALDI TOF spectra. Blending of POE‐IL with high‐molecular‐weight POE leads to significant reduction of crystallinity of POE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6961–6968, 2008     

Effects of Cationic Structure on Cellulose Dissolution in Ionic Liquids: A Molecular Dynamics Study

In recent years, great progress has been made in the dissolution of cellulose with ionic liquids (ILs). However, the mechanism of cellulose dissolution, especially the role the IL cation played in the dissolution process, has not been clearly understood. Herein, the mixtures of cellulose with a series of imidazolium‐based chloride ionic liquids and 1‐butyl‐3‐methyl pyridinium chloride ([C₄mpy]Cl) were simulated to study the effect that varying the heterocyclic structure and alkyl chain length of the IL cation has on the dissolution of cellulose. It was shown that the dissolution of cellulose in [C₄mpy]Cl is better than that in [C₄mim]Cl. For imidazolium‐based ILs, the shorter the alkyl chain is, the higher the solubility will be. In addition, an all‐atom force field for 1‐allyl‐3‐methyl imidazolium cation ([Amim]⁺) was developed, for the first time, to investigate the effect the electron‐withdrawing group within the alkyl chain of the IL cation has on the dissolution of cellulose. It was found that the interaction energy between [Amim]⁺ and cellulose was greater than that between [C₃mim]⁺ and cellulose, indicating that the presence of electron‐withdrawing group in alkyl chain of the cation enhanced the interaction between the cation and cellulose due to the increase of electronegativity of the cations. These findings are used to assess the cationic effect on the dissolution of cellulose in ILs. They are also expected to be important for rational design of novel ILs for efficient dissolution of cellulose.     

Ionic Association of the Ionic Liquids [C4mim][BF4], [C4mim][PF6], and [Cnmim]Br in Molecular Solvents

Considering the ionic nature of ionic liquids (ILs), ionic association is expected to be essential in solutions of ILs and to have an important influence on their applications. Although numerous studies have been reported for the ionic association behavior of ILs in solution, quantitative results are quite scarce. Herein, the conductivities of the ILs [C_nmim]Br (n=4, 6, 8, 10, 12), [C₄mim][BF₄], and [C₄mim][PF₆] in various molecular solvents (water, methanol, 1‐propanol, 1‐pentanol, acetonitrile, and acetone) are determined at 298.15 K as a function of IL concentration. The conductance data are analyzed by the Lee–Wheaton conductivity equation in terms of the ionic association constant (K_A) and the limiting molar conductance (Λ_m⁰). Combined with the values for the Br^? anion reported in the literature, the limiting molar conductivities and the transference numbers of the cations and [BF₄]^? and [PF₆]^? anions are calculated in the molecular solvents. It is shown that the alkyl chain length of the cations and type of anion affect the ionic association constants and limiting molar conductivities of the ILs. For a given anion (Br^?), the Λ_m⁰ values decrease with increasing alkyl chain length of the cations in all the molecular solvents, whereas the K_A values of the ILs decrease in organic solvents but increase in water as the alkyl chain length of the cations increases. For the [C₄mim]⁺ cation, the limiting molar conductivities of the ILs decrease in the order Br^?>[BF₄]^?>[PF₆]^?, and their ionic association constants follow the order [BF₄]^?>[PF₆]^?>Br^? in water, acetone, and acetonitrile. Furthermore, and similar to the classical electrolytes, a linear relationship is observed between ln K_A of the ILs and the reciprocal of the dielectric constants of the molecular solvents. The ILs are solvated to a different extent by the molecular solvents, and ionic association is affected significantly by ionic solvation. This information is expected to be useful for the modulation of the IL conductance by the alkyl chain length of the cations, type of anion, and physical properties of the molecular solvents.     

离子液体-水介质中离子液体负载TEMPO催化选择氧化合成脂肪醇羟基芳香醛和酮

由于脂肪醇羟基和苄醇羟基具有相同的氧化反应活性,所以当分子内同时含有脂肪醇羟基和苄醇羟基时,很难选择氧化苄醇羟基合成含脂肪醇羟基的芳香醛或酮。本文报道了在离子液体-水介质中,NCS/NaBr/IL-TEMPO（离子液体负载TEMPO）催化氧化合成含有脂肪醇羟基的芳香醛、酮的方法,反应条件温和,选择性好,收率高,且离子液体和催化剂可以循环使用。     

Ionic IPNs as novel candidates for highly conductive solid polymer electrolytes

Five ionic imidazolium based monomers, namely 1‐vinyl‐3‐ethylimidazolium bis(trifluoromethylsulfonyl)imide (ILM1), 1‐vinyl‐3‐(diethoxyphosphinyl)‐propylimidazolium bis(trifluoromethylsulfonyl)imide (ILM2), 1‐[2‐(2‐methyl‐acryloyloxy)‐propyl]‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (ILM3), 1‐[2‐(2‐methyl‐acryloyloxy)‐undecyl]‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (ILM4), 1‐vinyl‐3‐ethylimidazolium dicyanamide (ILM5) were prepared and used for the synthesis of linear polymeric ionic liquids (PILs), crosslinked networks with polyethyleneglycol dimethacrylate (PEGDM) and interpenetrating polymer networks (IPNs) based on polybutadiene (PB). The ionic conductivities of IPNs prepared using an in situ strategy were found to depend on the ILM nature, T_g and the ratio of the other components. Novel ionic IPNs are characterized by increased flexibility, small swelling ability in ionic liquids (ILs) along with high conductivity and preservation of mechanical stability even in a swollen state. The maximum conductivity for a pure IPN was equal to 3.6 × 10^?5 S/cm at 20 °C while for IPN swollen in [1‐Me‐3‐Etim] (CN)₂N σ reached 8.5 × 10^?3 S/cm at 20 °C or 1.4 × 10^?2 S/cm at 50 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4245–4266, 2009     

The polymeric ionic liquids/mesoporous alumina composites: Synthesis,characterization and CO2 capture performance test

The CO₂ capture materials and technology have received much attention in recent years due to the environmental deterioration caused by the greenhouse gas emissions. Several imidazolium polymeric ionic liquids (PILs) were synthesized and immobilized on mesoporous γ-Al₂O₃ (MA) using ultrasonic immersion method. The prepared adsorbents were characterized by FT-IR, ¹H NMR, EA, TGA, SEM, XRD, BET and TEM, indicating the successful synthesis of the desired PILs/MA. The CO₂ adsorption capacity was investigated under different loading ratios, temperatures, pressures and CO₂ flow rates, whose optimal adsorption conditions were 1/1, 313 K, 5 bar and 10 mL/min, respectively. Moreover, the adsorption curves for P[VCIm]Cl/MA were coincident with pseudo-second order model, and the CO₂ adsorption kinetics model was calculated and obtained. Compared with P[VRIm]Cl and P[VEIm]Cl, P[VCIm]Cl/MA demonstrated an outstanding adsorption amount of 0.562 mmol/g under the suitable conditions, and its regeneration efficiency could achieve 94.8% after 5 times cycle.     

Effect of Ionic Liquids on Catalytic Characteristics of Horse Liver Alcohol Dehydrogenase

The catalytic characteristics of horse liver alcohol dehydrogenase （HLADH） in the systems involving ionic liquids （ILs） （BMIm·Cl, BMIm·Br, BMIm·PF6, BMIm·BF4 BMIm·OTf and EMIm·Cl） were examined. HLADH displayed higher oxidation activity towards ethanol in the systems containing BMIm·Cl, BMIm·Br, EMIm·Cl or BMIm·PF6 with proper content than that in the IL-free buffer. An excessive amount of these ILs in the reaction systems resulted in an obvious decline in enzymatic activity. BMIm·BF4 and BMIm·OTf of any content investigated could considerably inhibit the enzyme. The anions of ILs showed significant effect on the activity, kinetic parameters and activation energy of HLADH-mediated ethanol oxidation. Additionally, BMIm·Cl, BMIm·Br, EMIm·Cl and BMIm·PF6 boosted markedly the thermostability of HLADH, while the enzyme was less thermostable in BMIm·BF4 or BMIm·OTf-containing systems. The associated conformational changes in HLADH caused by ILs were examined by UV technique.