Vitamin C: an experimental and theoretical study on the gas‐phase structure and ion energetics of protonated ascorbic acid

In order to investigate the gas‐phase mechanisms of the acid catalyzed degradation of ascorbic acid (AA) to furan, we undertook a mass spectrometric (ESI/TQ/MS) and theoretical investigation at the B3LYP/6‐31 + G(d,p) level of theory. The gaseous reactant species, the protonated AA, [C₆H₈O₆]H⁺, were generated by electrospray ionization of a 10^?3 M H₂O/CH₃OH (1 : 1) AA solution. In order to structurally characterize the gaseous [C₆H₈O₆]H⁺ ionic reactants, we estimated the proton affinity and the gas‐phase basicity of AA by the extended Cooks's kinetic method and by computational methods at the B3LYP/6‐31 + G(d,p) level of theory. As expected, computational results identify the carbonyl oxygen atom (O2) of AA as the preferred protonation site. From the experimental proton affinity of 875.0 ± 12 kJ mol^?1 and protonation entropy ΔS_p 108.9 ± 2 J mol^?1 K^?1, a gas‐phase basicity value of AA of 842.5 ± 12 kJ mol^?1 at 298 K was obtained, which is in agreement with the value issuing from quantum mechanical computations. Copyright © 2016 John Wiley & Sons, Ltd.     

Two Three‐Dimensional Metal‐Organic Frameworks Constructed from Alkaline Earth Metal Cations (Sr and Ba) and 5‐Nitroisophthalicacid – Synthesis,Charaterization, and Thermochemistry

Two MOFs of [Sr^II(5‐NO₂‐BDC)(H₂O)₆] ( 1 ) and [Ba^II(5‐NO₂‐BDC)(H₂O)₆] ( 2 ) have been synthesized in water using alkaline earth metal salts and the rigid organic ligand 5‐NO₂‐H₂BDC. The compounds were characterized by elemental analysis, infrared spectrum, thermal analysis, and X‐ray crystallography. Crystal structure analyses have shown that the two complexes are isostructural as evidenced by IR spectra and TG‐DTA. Both compounds present three‐dimensional frameworks built up from infinite chains of edge‐sharing twelve‐membered rings through O–H···O hydrogen bonds. The specific heat capacities of the title complexes have been determined by an improved RD496‐III microcalorimeter with the values of (109.29 ± 0.693) J mol⁻¹ K⁻¹ and (81.162 ± 0.858) J mol⁻¹ K⁻¹ at 298.15 K, and the molar enthalpy changes of the formation reactions of complexes at 298.15 K were calculated as (4.897 ± 0.008) kJ mol⁻¹ and (2.617 ± 0.009) kJ mol⁻¹, respectively.     

Picomole‐level Formaldehyde Determination in Gaseous and Beer Samples Using Flow Injection Chemiluminescence Analysis

Based on the linear enhancement of formaldehyde (FA) within 7.0 ～ 1000 pmol l^?1 on luminol—bovine serum albumin (BSA) chemiluminescence (CL) system, FA determination in air and beer samples using CL with flow injection (FI) was proposed. The detection limit was 2.5 pmol l^?1 (3σ) and the relative standard deviations were less than 4.5% (n = 7). At a flow rate of 2.0 mL min^?1, a whole analysis from sampling to washing only needed 32 s, offering a sample throughput of 112 h^?1. This proposed method was successfully utilized to determine FA vapor pressure in liquid (121.8 ± 3.8 Pa), FA content in real air sample (8.93 ± 0.03 mg m^?3), and FA levels in beer (199.5 ± 5.6 ～ 225.2 ± 3.5 mg l^?1), giving determination recoveries from 90.7% to 109.3%. The mechanism of BSA—FA interaction was also investigated, showing FA binding to BSA was a spontaneous process mainly through hydrogen bonding and van der Waals force by FI‐CL, with binding constant K of 1.89 × 10⁶ l mol^?1 and the number of binding sites n of 0.86. Molecular docking analysis further revealed FA could enter into the pocket at subdomain IIA of BSA, with K of 1.71 × 10⁵ l mol^?1 and ΔG of ‐29.68 kJ mol^?1.     

Investigation of the Removal of Lead by Adsorption onto 1‐(2‐Thiazolylazo)‐2‐Naphthol (TAN) Imbedded Polyurethane Foam from Aqueous Solution

A new preconcentration method is presented for lead on TAN‐loaded polyurethane foam (PUF) and its measurement by differential pulse anodic stripping voltammetry (DPASV). The optimum sorption conditions of 1.29 × 10^?5 M solution of Pb(II) ions on TAN‐loaded PUF were investigated. The maximum sorption was observed at pH 7 with 20 minutes equilibrated time on 7.25 mg mL^?1 of TAN‐loaded foam. The kinetic study indicates that the overall sorption process was controlled by the intra‐particle diffusion process. The validity of Freundlich, Langmuir and Dubinin ‐ Radushkevich adsorption isotherms were tested. The Freundlich constants 1/n and K_F are evaluated to be 0.45 ±0.04 and (1.03 +0.61) × 10^?3 mol g^?1, respectively. The monolayer sorption capacity and adsorption constant related to the Langmuir isotherm are (1.38 ± 0.08) × 10^?5 mol g^?1 and (1.46 ± 0.27) × 10⁵ L mol^?1, respectively. The mean free energy of Pb(II) ions sorption on‐TAN loaded PUF is 11.04 ± 0.28 kJ mol^?1 indicating chemisorption phenomena. The effect of temperature on the sorption yields thermodynamics parameters of ΔH, ΔS and ΔG at 298 K that are 15.0 ± 1.4 kJ mol^?1, 74 ±5 J mol^?1 K^?1 and ‐7.37 ± 0.28 kJ mol^?1, respectively. The positive values of enthalpy (ΔH) and entropy (ΔS) indicate the endothermic sorption and stability of the sorbed complexes are entropy driven. However, the negative value of Gibb's free energy (ΔG) indicates the spontaneous nature of sorption. On the basis of these data, the sorption mechanism has been postulated. The effect of different foreign ions on the sorption and desorption studies were also carried out. The method was successfully applied for the determination of lead from different water samples at ng levels.     

The elimination kinetics and mechanisms of ethyl piperidine‐3‐carboxylate,ethyl 1‐methylpiperidine‐3‐carboxylate,and ethyl 3‐(piperidin‐1‐yl)propionate in the gas phase

The gas‐phase elimination kinetics of the above‐mentioned compounds were determined in a static reaction system over the temperature range of 369–450.3°C and pressure range of 29–103.5 Torr. The reactions are homogeneous, unimolecular, and obey a first‐order rate law. The rate coefficients are given by the following Arrhenius expressions: ethyl 3‐(piperidin‐1‐yl) propionate, log k₁(s^?1) = (12.79 ± 0.16) ? (199.7 ± 2.0) kJ mol^?1 (2.303 RT)^?1; ethyl 1‐methylpiperidine‐3‐carboxylate, log k₁(s^?1) = (13.07 ± 0.12)–(212.8 ± 1.6) kJ mol^?1 (2.303 RT)^?1; ethyl piperidine‐3‐carboxylate, log k₁(s^?1) = (13.12 ± 0.13) ? (210.4 ± 1.7) kJ mol^?1 (2.303 RT)^?1; and 3‐piperidine carboxylic acid, log k₁(s^?1) = (14.24 ± 0.17) ? (234.4 ± 2.2) kJ mol^?1 (2.303 RT)^?1. The first step of decomposition of these esters is the formation of the corresponding carboxylic acids and ethylene through a concerted six‐membered cyclic transition state type of mechanism. The intermediate β‐amino acids decarboxylate as the α‐amino acids but in terms of a semipolar six‐membered cyclic transition state mechanism. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 106–114, 2006     

Enthalpy Change of Allosteric Transition in Human Haemoglobin A

Oxygen equilibria of haemoglobin were analysed according to a binding isotherm proposed by Amire ( Bull. Chem. Soc. Jpn. 1994, 67, 7 )¹ to obtain the intrinsic oxygen association constants to the molecule. Two sets of binding sites in haemoglobin were identified, which were ascribed to R₂ and T forms of the molecule. The average intrinsic association constants determined as a function of temperature gave a heat of oxygenation of‐76 ± 4 kJ mol^?;1 (tetramer). A microcalorimetrically determined heat of deoxygenation of oxyhaemoglobin by dithionite gave ?267 ± 10 kJ mol^?1 (tetramer). From these results, the heat of allostery of ?234 ± 24 kJ mol^?1 for haemoglobin tetramer was obtained, yielding allosteric energy per salt bridge of‐29 ± 3 kJ. This result suggests that salt‐bridge may, in fact, be thermochemically equivalent to hydrogen bonds.     

Kinetics of substitution of aqua ligands from cis‐diaqua (ethylenediamine)platinum(II) perchlorate by L‐asparagine in aqueous medium

The kinetics of the interaction of L ‐asparagine with [Pt(ethylenediamine)(H₂O)₂]²⁺ have been studied spectrophotometrically as a function of [Pt(ethylenediamine)(H₂O)₂²⁺], [L ‐asparagine], and temperature at pH 4.0, where the substrate complex exists predominantly as the diaqua species and L ‐asparagine as the zwitterion. The substitution reaction shows two consecutive steps: the first step is the ligand‐assisted anation and the second one is the chelation step. Activation parameters for both the steps have been calculated using Eyring equation. The low ΔH₁^≠ (43.59 ± 0.96 kJ mol^?1) and large negative values of ΔS₁^≠ (?116.98 ± 2.9 J K^?1 mol^?1) as well as ΔH₂^≠ (33.78 ± 0.51 kJ mol^?1) and ΔS₂^≠ (?221.43 ± 1.57 J K^?1 mol^?1) indicate an associative mode of activation for both the aqua ligand substitution processes. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 252–259, 2003     

Binuclear trans‐Bis(β‐iminoaryloxy)palladium(II) Complexes Doubly Linked with Pentamethylene Spacers: Structure‐Dependent Flapping Motion and Heterochiral Association Behavior of the Clothespin‐Shaped Molecules

The synthesis, structure, and solution‐state behavior of clothespin‐shaped binuclear trans‐bis(β‐iminoaryloxy)palladium(II) complexes doubly linked with pentamethylene spacers are described. Achiral syn and racemic anti isomers of complexes 1 – 3 were prepared by treating Pd(OAc)₂ with the corresponding N,N′‐bis(β‐hydroxyarylmethylene)‐1,5‐pentanediamine and then subjecting the mixture to chromatographic separation. Optically pure (100 % ee) complexes, (+)‐anti‐ 1 , (+)‐anti‐ 2 , and (+)‐anti‐ 3 , were obtained from the racemic mixture by employing a preparative HPLC system with a chiral column. The trans coordination and clothespin‐shaped structures with syn and anti conformations of these complexes have been unequivocally established by X‐ray diffraction studies. ¹H NMR analysis showed that (±)‐anti‐ 1 , (±)‐anti‐ 2 , syn‐ 2 , and (±)‐anti‐ 3 display a flapping motion by consecutive stacking association/dissociation between cofacial coordination planes in [D₈]toluene, whereas syn‐ 1 and syn‐ 3 are static under the same conditions. The activation parameters for the flapping motion (ΔH^≠ and ΔS^≠) were determined from variable‐temperature NMR analyses as 50.4 kJ mol^?1 and 60.1 J mol^?1 K^?1 for (±)‐anti‐ 1 , 31.0 kJ mol^?1 and ?22.7 J mol^?1 K^?1 for (±)‐anti‐ 2 , 29.6 kJ mol^?1 and ?57.7 J mol^?1 K^?1 for syn‐ 2 , and 35.0 kJ mol^?1 and 0.5 J mol^?1 K^?1 for (±)‐anti‐ 3 , respectively. The molecular structure and kinetic parameters demonstrate that all of the anti complexes flap with a twisting motion in [D₈]toluene, although (±)‐anti‐ 1 bearing dilated Z‐shaped blades moves more dynamically than I‐shaped (±)‐anti‐ 2 or the smaller (±)‐anti‐ 3 . Highly symmetrical syn‐ 2 displays a much more static flapping motion, that is, in a see‐saw‐like manner. In CDCl₃, (±)‐anti‐ 1 exhibits an extraordinary upfield shift of the ¹H NMR signals with increasing concentration, whereas solutions of (+)‐anti‐ 1 and the other syn/anti analogues 2 and 3 exhibit negligible or slight changes in the chemical shifts under the same conditions, which indicates that anti‐ 1 undergoes a specific heterochiral association in the solution state. Equilibrium constants for the dimerizations of (±)‐ and (+)‐anti‐ 1 in CDCl₃ at 293 K were estimated by curve‐fitting analysis of the ¹H NMR chemical shift dependences on concentration as 26 M ^?1 [K_D(racemic)] and 3.2 M ^?1 [K_D(homo)], respectively. The heterochiral association constant [K_D(hetero)] was estimated as 98 M ^?1, based on the relationship K_D(racemic)=1/2 K_D(homo)+1/4 K_D(hetero). An inward stacking motif of interpenetrative dimer association is postulated as the mechanistic rationale for this rare case of heterochiral association.     

The gas‐phase elimination kinetics of ethyl 2‐furoate and ethyl 2‐thiophenecarboxylate

The gas‐phase elimination kinetics of ethyl 2‐furoate and 2‐ethyl 2‐thiophenecarboxylate was carried out in a static reaction system over the temperature range of 623.15–683.15 K (350–410°C) and pressure range of 30–113 Torr. The reactions proved to be homogeneous, unimolecular, and obey a first‐order rate law. The rate coefficients are expressed by the following Arrhenius equations: ethyl 2‐furoate, log k₁ (s^?1) = (11.51 ± 0.17)–(185.6 ± 2.2) kJ mol^?1 (2.303 RT)^?1; ethyl 2‐thiophenecarboxylate, log k₁ (s^?1) = (11.59 ± 0.19)–(183.8 ± 2.4) kJ mol^?1 (2.303 RT)^?1. The elimination products are ethylene and the corresponding heteroaromatic 2‐carboxylic acid. However, as the reaction temperature increases, the intermediate heteroaromatic carboxylic acid products slowly decarboxylate to give the corresponding heteroaromatic furan and thiophene, respectively. The mechanisms of these reactions are suggested and described. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 145–152, 2009     

A Quantum Chemical Study of the Abnormal Reactivity of 2‐Methoxyfuran

The gas‐phase pyrolytic and oxidative chemistry of furans has received much attention recently because of their potential as platform chemicals and biofuels. Typically these compounds exhibit very strong ring carbon to H or CH₃ bonds. 2‐Methoxyfuran had been reported to be exceptionally unstable in comparison to related substituted heterocycles in pyrolytic experiments. The origins of its reactivity are shown to be due to the very weak O–CH₃, which at 189.5 ± 1.9 kJ mol^?1 is some 200 kJ mol^?1 weaker than C–H bonds in the molecule. We show that the reported reactivity is somewhat overestimated but that does not alter the fact that 2‐methoxyfuran is exceptionally unstable. It may prove to be a useful alternative to azomethane as a thermal source of methyl radicals.     

Strong N−X⋅⋅⋅O−N Halogen Bonds: A Comprehensive Study on N‐Halosaccharin Pyridine N‐Oxide Complexes

A study of the strong N?X???^?O?N⁺ (X=I, Br) halogen bonding interactions reports 2×27 donor×acceptor complexes of N‐halosaccharins and pyridine N‐oxides (PyNO). DFT calculations were used to investigate the X???O halogen bond (XB) interaction energies in 54 complexes. A simplified computationally fast electrostatic model was developed for predicting the X???O XBs. The XB interaction energies vary from ?47.5 to ?120.3 kJ mol^?1; the strongest N?I???^?O?N⁺ XBs approaching those of 3‐center‐4‐electron [N?I?N]⁺ halogen‐bonded systems (ca. 160 kJ mol^?1). ¹H NMR association constants (K_XB) determined in CDCl₃ and [D₆]acetone vary from 2.0×10⁰ to >10⁸ m ^?1 and correlate well with the calculated donor×acceptor complexation enthalpies found between ?38.4 and ?77.5 kJ mol^?1. In X‐ray crystal structures, the N‐iodosaccharin‐PyNO complexes manifest short interaction ratios (R_XB) between 0.65–0.67 for the N?I???^?O?N⁺ halogen bond.     

Phase Chemistry Investigation on Cr(NO3)3‐Met‐H2O System

The solubility property of the ternary of Cr(NO₃)₃‐Met‐H₂O has been investigated in the whole concentration by the phase equilibrium method, and the phase diagram has been constructed. From the phase diagram, the congruently soluble complexes Cr(Met)(NO₃)₃·2H₂O (D) and Cr(Met)₂(NO₃)₃·2H₂O (E) have been prepared and characterized by chemical analysis, elemental analysis, IR and TG‐DTG. Their combustion energies have been determined by a RBC‐type I precision rotating‐bomb calorimeter, and their standard enthalpies of formation, Δf, Hθ_m, have been calculated as (‐1842.01 ± 2.13) kJ·mol^?1 and (‐1136.16 ± 4.45) kJ·mol^?1, respectively.     

Kinetics and mechanism of the interaction of adenosine with cis‐diaqua(cis‐1,2‐diaminocyclohexane)platinum(II) perchlorate in aqueous medium

The kinetics of the interaction of adenosine with cis‐[Pt(cis‐dach)(OH₂)₂]²⁺ (dach = diaminocyclohexane) was studied spectrophotometrically as a function of [cis‐[Pt(cis‐dach)(OH₂)₂]²⁺], [adenosine], and temperature at a particular pH (4.0), where the substrate complex exists predominantly as the diaqua species and the ligand adenosine exists as a neutral molecule. The substitution reaction shows two consecutive steps: the first is the ligand‐assisted anation followed by a chelation step. The activation parameters for both the steps have been evaluated using Eyring equation. The low negative value of ΔH^≠₁ (43.1 ± 1.3 kJ mol^?1) and the large negative value of ΔS^≠₁ (?177 ± 4 J K^?1 mol^?1) along with ΔH^≠₂ (47.9 ± 1.8 kJ mol^?1) and ΔS^≠₂ (?181 ± 6 J K^?1 mol^?1) indicate an associative mode of activation for both the aqua ligand substitution processes. The kinetic study was substantiated by infrared and electrospray ionization mass spectroscopic analysis. © 2011 Wiley Peiodicals, Inc. Int J Chem Kinet 43: 219–229, 2011     

Synthesis,Structure, and Characterization of 3, 4′‐Bis‐1H‐1, 2,4‐triazolium Picrate Salt: A New High‐Energy Density Material

The environmentally friendly high‐energy density salt (TRTR)(PA) (TRTR = 3, 4′‐bis‐1, 2,4‐1H‐triazole, PA = 2, 4,6‐trinitrophenol, picric acid) was synthesized and characterized. The X‐ray single crystal diffraction results illustrate that the structure of title salt belongs to the monoclinic system, space group P2₁/c. Many parallel relationships exist in the molecule, as well as a strong intramolecular π–π stacking interaction. The DSC result shows only one exothermal decomposition step at 229.1 °C. The TG‐DTG curve demonstrates a 75.9 % mass loss from 180 °C to 300 °C at a rate of 3.01 % · K^–1. Experimental data show that the combustion heat approximately equals to TNT (–15.22 MJ · kg^–1) and the enthalpy of formation is +332.2 kJ · mol^–1. Non–isothermal kinetic and thermodynamic parameters were obtained by two methods (Kissinger and Ozawa). Detonation pressure and velocity were calculated to be 23.4 GPa and 7.32 km · s^–1, respectively. Additionally, the sensitivities towards impact and friction were assessed with relevant standard methods.     

Mechanistic Aspects of Ligand Substitution on the Hydroxopentaaquarhodium(III) Ion in Aqueous Solution by Sulfur‐Containing Bioactive Ligands

The kinetics of the interactions between three sulfur‐containing ligands, thioglycolic acid, 2‐thiouracil, glutathione, and the title complex, have been studied spectrophotometrically in aqueous medium as a function of the concentrations of the ligands, temperature, and pH at constant ionic strength. The reactions follow a two‐step process in which the first step is ligand‐dependent and the second step is ligand‐independent chelation. Rate constants (k₁ ～10^?3 s^?1 and k₂ ～10^?5 s^?1) and activation parameters (for thioglycolic acid: ΔH₁^≠ = 22.4 ± 3.0 kJ mol^?1, ΔS₁^≠ = ?220 ± 11 J K^?1 mol^?1, ΔH₂^≠ = 38.5 ± 1.3 kJ mol^?1, ΔS₂^≠ = ?204 ± 4 J K^?1 mol^?1; for 2‐thiouracil: ΔH₁^≠ = 42.2 ± 2.0 kJ mol^?1, ΔS₁^≠ = ?169 ± 6 J K^?1 mol^?1, ΔH₂^≠ = 66.1 ± 0.5 kJ mol^?1, ΔS₂^≠ = ?124 ± 2 J K^?1 mol^?1; for glutathione: ΔH₁^≠ = 47.2 ± 1.7 kJ mol^?1, ΔS₁^≠ = ?155 ± 5 J K^?1mol^?1, ΔH₂^≠ = 73.5 ± 1.1 kJ mol^?1, ΔS₂^≠ = ?105 ± 3 J K^?1 mol^?1) were calculated. Based on the kinetic and activation parameters, an associative interchange mechanism is proposed for the interaction processes. The products of the reactions have been characterized from IR and ESI mass spectroscopic analysis. A rate law involving the outer sphere association complex formation has been established as      

Synthesis,characterization, and optimum reaction conditions of oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol

The reaction conditions of the oxidative polycondensation of 2‐[(pyridine‐2‐yl‐methylene) amino] phenol (2‐PMAP) with air O₂, H₂O₂, and NaOCl were studied in an aqueous alkaline medium between 60 and 90 °C. Oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol (O‐2‐PMAP) was characterized with ¹H NMR, Fourier transform infrared, ultraviolet–visible, size exclusion chromatography (SEC), and elemental analysis techniques. Moreover, solubility testing of the oligomer was performed in polar and nonpolar organic solvents. With the NaOCl, H₂O₂, and air O₂ oxidants, the conversions of 2‐PMAP into O‐2‐PMAP were 98, 87, and 62%, respectively, in an aqueous alkaline medium. According to SEC, the number‐average molecular weight, weight‐average molecular weight, and polydispersity index of O‐2‐PMAP were 2262 g mol^?1, 2809 g mol^?1, and 1.24 with NaOCl, 3045 g mol^?1, 3861 g mol^?1, and 1.27 with air O₂, and 1427 g mol^?1, 1648 g mol^?1, and 1.16 with air H₂O₂, respectively. Also, thermogravimetric analysis showed that O‐2‐PMAP was stable against thermooxidative decomposition. The weight loss of O‐2‐PMAP was 96.68% at 900 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2717–2724, 2004     

First Principles (DFT) Characterization of RhI/dppp‐Catalyzed CH Activation by Tandem 1,2‐Addition/1,4‐Rh Shift Reactions of Norbornene to Phenylboronic Acid

The C?H activation in the tandem, “merry‐go‐round”, [(dppp)Rh]‐catalyzed (dppp=1,3‐bis(diphenylphosphino)propane), four‐fold addition of norborene to PhB(OH)₂ has been postulated to occur by a C(alkyl)?H oxidative addition to square‐pyramidal Rh^III?H species, which in turn undergoes a C(aryl)?H reductive elimination. Our DFT calculations confirm the Rh^I/Rh^III mechanism. At the IEFPCM(toluene, 373.15 K)/PBE0/DGDZVP level of theory, the oxidative addition barrier was calculated to be 12.9 kcal mol^?1, and that of reductive elimination was 5.0 kcal mol^?1. The observed selectivity of the reaction correlates well with the relative energy barriers of the cycle steps. The higher barrier (20.9 kcal mol^?1) for norbornyl–Rh protonation ensures that the reaction is steered towards the 1,4‐shift (total barrier of 16.3 kcal mol^?1), acting as an equilibration shuttle. The carborhodation (13.2 kcal mol^?1) proceeds through a lower barrier than the protonation (16.7 kcal mol^?1) of the rearranged aryl–Rh species in the absence of o‐ or m‐substituents, ensuring multiple carborhodations take place. However, for 2,5‐dimethylphenyl, which was used as a model substrate, the barrier for carborhodation is increased to 19.4 kcal mol^?1, explaining the observed termination of the reaction at 1,2,3,4‐tetra(exo‐norborn‐2‐yl)benzene. Finally, calculations with (Z)‐2‐butene gave a carborhodation barrier of 20.2 kcal mol^?1, suggesting that carborhodation of non‐strained, open‐chain substrates would be disfavored relative to protonation.     

Variable‐Temperature Infrared Spectroscopy Studies on the Thermodynamics of CO Adsorption on the Zeolite Ca–Y

Variable temperature FT–IR spectroscopy (in the range of 298–380 K) is used to study the thermodynamics of formation of Ca²⁺???CO carbonyl species upon CO adsorption on the faujasite‐type zeolite Ca–Y, and also the (temperature‐dependent) isomerization equilibrium between carbonyl and isocarbonyl (Ca²⁺???OC) species. The standard enthalpy and entropy changes involved in formation of the monocarbonyl species resulted to be ΔH⁰=?50.3 (±0.5) kJ mol^?1 and ΔS⁰=?186 (±5) J mol^?1 K^?1, respectively. Isomerization of the (C‐bonded) Ca²⁺???CO carbonyl to yield the (O‐bonded) Ca²⁺???OC isocarbonyl involves an enthalpy change =+11.4 (±1.0) kJ mol^?1. These results are compared with previously reported data for the CO/Sr–Y system; and also, a brief analysis of enthalpy–entropy correlation for CO adsorption on zeolites and metal oxides is given.     

苏糖酸钾的低温热溶及标准摩尔生成焓测定

以苏糖酸与碳酸氢钾反应制得苏糖酸钾K(C₄H₇O₅)·H₂O，通过红外光谱、热重、化学分析及元素分析等对其进行了表征。用精密自动绝热热量计测量了该化合物在78K-395K温区的摩尔热容。实验结果表明，该化合物存在明显的脱水转变，其脱水浓度、摩尔脱水焓以及摩尔脱水熵分别为：(380.524 ± 0.093) K，(19.655 ± 0.012) kJ/mol 和 (51.618 ± 0.051) J/（K·mol）。将78K-362K和382K-395K两个温区的实验热容值用最小二乘法拟合，得到了两个表示热容随温度变化的多项式方程。以RBC-II型恒容转动弹热量计测定目标化合物的恒容燃烧能为(-1749.71 ± 0.91) kJ/mol，计算得到其标准摩尔生成焓为(-1292.56 ± 1.06) kJ/mol。