Modèles discrets de structures tissées : Analyse de stabilité et de drapéDiscrete models of woven structures: stability and draping analysis

A discrete model of a woven fabric structure is established, whereby nodes endowed with a mass and a rotational rigidity are connected by rigid bars to form a two-dimensional truss. The set of four bars that delineate a quadrilateral area is further endowed with a torsion deformation mode. The kinematics of the truss reproduces the large rotations and displacements encountered for real tissues. The equilibrium shape of such a structure is obtained as the minimum of its total potential energy versus the whole set of kinematic translational and rotational variables, accounting for eventual kinematic constraints due to contact with a rigid surface by the Lagrange multipliers method. A stability analysis is conducted, and the potentiality of the model is illustrated by fabric draping simulations. To cite this article: B. Ben Boubaker et al., C. R. Mecanique 330 (2002) 871–877.     

Transfert du trichloréthylène en milieu poreux à partir d'un panache de vapeursMass transfer of trichloroethylene in a porous medium from a vapor plume

A large scale experiment has been carried out on an experimental facility to study the mass transfer of trichloroethylene (TCE) in a partially saturated porous medium. 5 liters of TCE have been infiltrated in the vadose zone of the site. The mass transfer of TCE from the vapor plume in the unsaturated zone towards the top of groundwater was quantified based on an analytical and a numerical approach. The mass of the pollutant measured at the exit of the model is well represented by the two mathematical approaches. It is found that the transfer of TCE towards the groundwater from the vapor plume is weak, which corresponds to 285 g of TCE, approximately 4% of the initial mass. To cite this article: H. Benremita, G. Schäfer, C. R. Mecanique 331 (2003).     

An approximate solution to the integral radiative transfer equation in an optically thick slab

We consider the problem of solving the integral form of the radiative transfer equation in an atmosphere with optical thickness τ₀1. We propose a method transforming this problem in the same problem posed in an atmosphere with optical thickness τ₁τ₀. An error over- estimation is derived. To cite this article: A. Amosov et al., C. R. Mecanique 331 (2003).     

Sur les approximations « isotrope » et « anisotrope » de l''opérateur tangent pour les méthodes tangentes incrémentale et affineOn the ‘isotropic’ and ‘anisotropic’ approximations of the tangent operator in the incremental tangent and affine methods

Three localisation rules, TFA, the incremental tangent, and the affine method, are recalled and evaluated in the context of the elastoplastic micromechanical analysis of heterogeneous materials, composites or polycrystals. With the help of a severe example, it is shown how methods based on the complete anisotropic elastoplastic tangent operator yield very stiff predictions which are far from the reference solution; the same conclusion holds for the method using the elastic accommodation rule. On the other hand, using an isotropic form of the tangent operator delivers much better responses. The reasons for such differences are discussed, together with possible justifications for the choice of the isotropic form. To cite this article: J.-L. Chaboche, P. Kanouté, C. R. Mecanique 331 (2003).     

Identification de la relation de dispersion dans les barresIdentification of the dispersion relation in rods

Dispersion and attenuation of longitudinal waves in elastic or weakly viscoelastic rods are measured by analysing the resonant frequencies present in the strain spectrum due to an unknown loading. The method takes the finite measuring time of the test into account. It is applied to an aluminium bar, in which the dispersion relation is identified very accurately at frequencies up to 60 kHz. To cite this article: R. Othman et al., C. R. Mecanique 330 (2002) 849–855.     

Modélisation du comportement thermique d'un outil de fraisage : approche par identification de système non entierThermal modelling of a milling tool: a noninteger system identification approach

In this work we present an experimental apparatus devoted to the thermal characterisation of a milling tool. The experimental device used thermistors, one for each insert. Each thermistor is located at a point in the tool close to the tip of the insert. The heat flux in each insert is expressed according to the temperature at the sensor from a non-integer model. The parameters of the model are identified from transient evolutions measurements of the temperature on the sensor and on the cutting edge. An application shows the difference in the behaviour of each insert during machining from the estimated heat fluxes. To cite this article: J.-L. Battaglia et al., C. R. Mecanique 330 (2002) 857–864.     

Homogénéisation de problèmes d''évolution dans une structure renforcée de fibresHomogenization of evolution problems in a fiber reinforced structure

We study the homogenization of evolution equations such as:

where the coefficient a is -periodic and takes very high values on a subset TΩ (fibered structure) of very small measure. We find a non-local effective equation deduced from a homogenized system of several equations. To cite this article: M. Bellieud, C. R. Mecanique 330 (2002) 843–848.     

Using data assimilation in numerical simulations of experimental geophysical flows

Data assimilation is used to couple numerical simulations and laboratory experiments of unsteady fluid flows in a stratified, rotating fluid. The experiments are performed on the large Coriolis turntable (Grenoble) and the simulations are performed with a multi-layer shallow water model. Sequential assimilation of high-resolution CIV (Correlation Image Velocimetry) measurements drives the numerical model close to the experimental flow and provides an estimation of all the flow variables at each time and each point. It is then possible (i) to analyse the flow dynamics in details, (ii) to determine the model errors starting from a realistic initial condition and (iii) to test the assimilation scheme when a reduced set of data is assimilated. To illustrate this, some results on the baroclinic instability of a two-layer vortex are presented. To cite this article: M. Galmiche et al., C. R. Mecanique 331 (2003).     

A model for frictional slip in woven fabrics

A continuum model for frictional slip of the yarns of a plain-weave fabric is presented. The model is based on the assumption that the weave is composed of two families of continuously distributed yarns constrained at all times to occupy a common evolving surface in three-dimensional space. The two families may slide relative to one another on the surface, subject to their respective equations of motion, fiber constitutive equations, and frictional slip rules. The theory is intended for the quantitative analysis of deformation, slip and energy dissipation during a ballistic impact event. To cite this article: B. Nadler, D.J. Steigmann, C. R. Mecanique 331 (2003).     

Homogenization of an elasticity problem in domains with a net of slender bars near surface

We consider an elasticity problem in a domain Ω⁽⁾=ΩF⁽⁾, where Ω is an open bounded domain in R³, F⁽⁾ is a connected nonperiodic set in Ω like a net of slender bars, and is a parameter characterizing the microstructure of the domain. We consider the case of a surface distribution of the set F⁽⁾, i.e., for sufficiently small , the set F⁽⁾ is concentrated in arbitrary small neighbourhood of a surface Γ. Under a hypothesis on the asymptotic behaviour of the energy functional, we obtain the macroscopic (homogenized) model. To cite this article: M. Goncharenko, L. Pankratov, C. R. Mecanique 331 (2003).     

Micromechanical computational modeling of expansive porous media

A modified Terzaghi principle is proposed to describe the influence of locally coupled electro-chemo-mechanical processes in highly compacted swelling clays upon the form of the macroscopic modified effective stress principle. The two-scale model is derived using the homogenization procedure to upscale the microscopic behavior of a two-phase system composed of clay particles saturated by a completely dissociated electrolyte aqueous solution. Numerical experiments are performed to illustrate the results in a particular cell geometry. To cite this article: M.A. Murad, C. Moyne, C. R. Mecanique 330 (2002) 865–870.     

Domain decomposition for an asymptotic geological fault modeling

We present in this paper a domain decomposition method to treat faults in geological basin modeling. The particularity of this model is that the faults whose widths are very small in comparison with the basin size, are not characterized as subdomains any more but as interfaces between sedimentary blocks. The originality of this work lies in the formulation of this new fault model and in the definition and the computation of the interface conditions between the subdomains. To cite this article: E. Flauraud et al., C. R. Mecanique 331 (2003).     

A two grid algorithm based on perturbation and homotopy methods

In this paper, we propose a new class of bi-grid algorithm to solve large scale linear algebraic equations. This method is based on homotopy, perturbation technique and Padé approximants. To cite this article: R. El Mokhtari et al., C. R. Mecanique 330 (2002) 825–830.     

Développement d''un modèle en vue de la prédiction du rallumage d''un foyer de turboréacteur à haute altitudeDevelopment of a model to predict the ignition performance of a turbojet engine at high altitude

Within the context of turbojet engine re-ignition after in-flight extinction, a thermo-diffusive model has been developed to describe the electrical ignition, at low pressure and low temperature, of a cluster of fuel droplets. The model involves the resolution of the conservation equations of mass, species and energy. It also takes into account the various physical and chemical phenomena occurring during the ignition process. This Note presents the ignition model and preliminary results of this model applied to an experimental configuration. To cite this article: V. Quintilla et al., C. R. Mecanique 330 (2002) 811–818.     

Nonlinear models of vehicular traffic flow – new frameworks of the mathematical kinetic theory

This paper deals with the design of mathematical frameworks for the modeling of traffic flow phenomena by suitable developments of classical models of the kinetic theory. Various types of evolution equations are deduced, and different mathematical structures are proposed toward conceivable applications. To cite this article: M. Delitala, C. R. Mecanique 331 (2003).     

Oscillatory fracture paths in thin elastic sheets

We report a novel mode of quasi-static oscillatory crack propagation when a cutting tip of moderately large width is driven through a thin brittle polymer film. Experiments show that the amplitude and wavelength of the oscillatory crack paths scale linearly with the width of the cutting tip over a wide range of length scales but are independent of the width of the sheet and of the cutting speed. We propose a mechanism for this instability, based on the coupling between crack propagation and out-of-plane deformations of the film. To cite this article: B. Roman et al., C. R. Mecanique 331 (2003).     

Confined buckling of inextensible rods by convex difference algorithms

In this Note we present an approach to determine the local minima of a specific class of minimization problems. Attention is focused on the inextensibility condition of flexible rods expressed as a nonconvex constraint. Two algorithms are derived from a special splitting of the Lagrangian into the difference of two convex functions (DC). They are compared to the augmented Lagrangian methods used in this context. These DC formulations are easily extended to contact problems and applied to the determination of confined buckling shapes. To cite this article: P. Alart, S. Pagano, C. R. Mecanique 330 (2002) 819–824.     

Solute diffusion in fractured porous media with memory effects due to adsorption

Modelling of solute transport in fractured porous media is a subject of intensive research in many engineering disciplines, such as petroleum engineering, water resources management, civil engineering. Recent field and laboratory experiments show that, in presence of strong adsorption, the behaviour of solute penetrating into the fractured porous medium diverges from classical hypotheses, rendering impossible the adjustment of classical transport models. The aim of this paper is to develop a mathematical continuous model of solute transport, when strong adsorption of solute occurs on the grains of the porous matrix. The macroscopic model is obtained by upscaling the pore and the fracture behaviours, by using the multiple scale expansion method. We obtain a non-standard diffusion behaviour of solute which shows local non-equilibrium between transport in the fractures and in the porous matrix, as well as memory effects. To cite this article: J. Lewandowska et al., C. R. Mecanique 330 (2002) 879–884.     

On the confinement of a viscous fluid by means of a feedback external field

In this work we consider a planar stationary flow of an incompressible viscous fluid in a semi-infinite strip governed by the standard Stokes system. We show how this fluid can be stopped at a finite distance from the entrance of the semi-infinite strip by means of a feedback source depending in a sublinear way on the velocity field. This localization effect is proved by reducing the problem to a non-linear biharmonic type one for which the localization of solutions is obtained through the application of an energy method, in the spirit of the monograph by S.N. Antontsev, J.I. Díaz and S.I. Shmarev (Energy Methods for Free Boundary Problems: Applications to Non-Linear PDEs and Fluid Mechanics, Birkäuser, Boston, 2002). Since the presence of the non-linear terms defined by the source is not standard in fluid mechanics literature, we give also some results about the existence and uniqueness of weak solutions for this problem. To cite this article: S.N. Antontsev et al., C. R. Mecanique 330 (2002) 797–802.     

Etude de la détonation de mélanges pauvres H2NO2/N2O4

Calculations of the detonation reaction zone of gaseous H₂NO₂/N₂O₄ mixtures in the range of equivalence ratio Φ between 0.25 and 0.7 show that for 0.25Φ0.4 the chemical energy is released in two distinct and successive exothermic steps characterised by different chemical characteristic times. As for rich mixtures, the first exothermic step is mainly due to the reaction NO₂ + H → NO + OH, but the second one is different since it results from the exothermic decomposition of NO into N₂ and O₂. For Φ=0.3 the measured detonation velocity in a tube of 52 mm internal diameter is very much smaller than the calculated value and the mean size of the cellular structure is very much larger than the value extrapolated from data obtained with mixtures of higher but close equivalence ratio. All these results show that the detonation, though self-sustained and steady, is ‘non-ideal’, i.e. it is supported only by a part of the available chemical energy, that provided mainly by the first exothermic step. To cite this article: D. Desbordes et al., C. R. Mecanique 332 (2004).