Affinity‐based cell separation is label‐free and highly specific, but it is difficult to efficiently and gently release affinity‐captured cells due to the multivalent nature of cell‐material interactions. To address this challenge, we have developed a platform composed of a capture substrate and a cell‐releasing molecular trigger. The capture substrate is functionalized with a cell‐capture antibody and a coiled‐coil A . The cell‐releasing molecular trigger B ‐PEG (polyethylene glycol), a conjugate of a coiled‐coil B and polyethylene glycol, can drive efficient and gentle release of the captured cells, because A / B heterodimerization brings B ‐PEG to the substrate and PEG chains adopt extended conformations and break nearby multivalent antibody‐biomarker interactions. No enzymes or excessive shear stress are involved, and the released cells have neither external molecules attached nor endogenous cell‐surface molecules cleaved, which is critical for the viability, phenotype, and function of sensitive cells.
Stem cell transplantations for spinal cord injury (SCI) have been studied extensively for the past decade in order to replace the damaged tissue with human pluripotent stem cell (hPSC)‐derived neural cells. Transplanted cells may, however, benefit from supporting and guiding structures or scaffolds in order to remain viable and integrate into the host tissue. Biomaterials can be used as supporting scaffolds, as they mimic the characteristics of the natural cellular environment. In this study, hPSC‐derived neurons, astrocytes, and oligodendrocyte precursor cells (OPCs) are cultured on aligned poly(ε‐caprolactone) nanofiber platforms, which guide cell orientation to resemble that of spinal cord in vivo. All cell types are shown to efficiently spread over the nanofiber platform and orient according to the fiber alignment. Human neurons and astrocytes require extracellular matrix molecule coating for the nanofibers, but OPCs grow on nanofibers without additional treatment. Furthermore, the nanofiber platform is combined with a 3D hydrogel scaffold with controlled thickness, and nanofiber‐mediated orientation of hPSC‐derived neurons is also demonstrated in a 3D environment. In this work, clinically relevant materials and substrates for nanofibers, fiber coatings, and hydrogel scaffolds are used and combined with cells suitable for developing functional cell grafts for SCI repair.
The strand material in extrusion‐based bioprinting determines the microenvironments of the embedded cells and the initial mechanical properties of the constructs. One unmet challenge is the combination of optimal biological and mechanical properties in bioprinted constructs. Here, a novel bioprinting method that utilizes core–shell cell‐laden strands with a mechanically robust shell and an extracellular matrix‐like core has been developed. Cells encapsulated in the strands demonstrate high cell viability and tissue‐like functions during cultivation. This process of bioprinting using core–shell strands with optimal biochemical and biomechanical properties represents a new strategy for fabricating functional human tissues and organs.
Cell sorting is important for cell biology and regenerative medicine. A visible light‐responsive cell scaffold is produced using gold nanoparticles and collagen gel. Various kinds of cells are cultured on the visible light‐responsive cell scaffold, and the target cells are selectively detached by photoirradiation without any cytotoxicity. This is a new image‐guided cell sorting system.
Stimuli‐responsive nanocarriers with the ability to respond to tumorous heterogeneity have been extensively developed for drug delivery. However, the premature release during blood circulation and insufficient intracellular drug release are still a significant issue. Herein, three disulfide bonds are introduced into the amphiphilic poly(ethylene glycol)‐polycaprolactone copolymer blocks to form triple‐sensitive cleavable polymeric nanocarrier (tri‐PESC NPs) to improve its sensitivity to narrow glutathione (GSH) concentration. The tri‐PESC NPs keep intact during blood circulation due to the limited cleaving of triple‐disulfide bonds, whereas the loaded drug is efficiently released at tumor cells with the increased concentration of GSH. In vitro studies of doxorubicin‐loaded tri‐PESC NPs show that the nanocarriers achieve sufficient drug release in cancerous cells and inhibit the tumor cells growth, though they only bring minimum damage to normal cells. Therefore, the tri‐PESC NPs with triple‐sensitive cleavable bonds hold great promise to improve the therapeutic index in cancer therapy.
This article reports the behavior of embryonic neural stem cells on a hydrogel that combines cationic, non‐specific cell adhesion motifs with glycine‐arginine‐glycine‐aspartic acid‐serine‐phenylalanine (GRGDSF)‐peptides as specific cell adhesion moieties. Therefore, three hydrogels are prepared by free radical polymerization that contains either a GRGDSF‐peptide residue ( P1 ), amino ethylmethacrylate as a cationic residue ( P2 ), or a combination of both motifs ( P3 ). For each gel, cross linker concentrations of 8 mol% is used to have a comparable gel stiffness of 8–9 kPa. The cell experiments indicate a synergistic effect of the non‐specific, cationic residues, and the specific GRGDSF‐peptides on embryonic neural stem cell behavior that is especially pronounced in the cell adhesion experiments by more than doubling the number of cells after 72 h when comparing P3 with P2 and is less pronounced in the proliferation and differentiation experiments.
This paper demonstrates the development of pH and thermo‐responsive fluorescent nanoparticles, which are composed of graphene oxide (GO) with BODIPY conjugated PEG, to trigger the detection of cancer cells through imaging based on intracellular accommodation. Responsiveness to pH is studied using atomic force microscopy and apparent thickness differences are seen with changes in pH. Confocal images of the nanoparticles (NPs) exhibit remarkably bright fluorescence at lysosomal pH, while no fluorescence is observed under a physiological environment, making the NPs a novel fluorescent probe. The NPs are able to accumulate the hydrophobic anticancer drug DOX due to the hydrophobic surface of GO and show excellent drug release behavior. Therefore, the NPs developed are novel candidates for a fluorescent probe to identify cancer cells and a drug carrier for cancer therapy.
Aggregation‐caused quenching (ACQ) is a general phenomenon that is faced by traditional fluorescent polymers. Aggregation‐induced emission (AIE) is exactly opposite to ACQ. AIE molecules are almost nonemissive in their molecularly dissolved state, but they can be induced to show high fluorescence in the aggregated or solid state. Incorporation of AIE phenomenon into polymer design has yielded various polymers with AIE characteristics. In this review, the recent progress of AIE polymers for biological applications is summarized.
Current state‐of‐the‐art management of open spina bifida defects entails an open fetal surgery approach associated with significant morbidities. In an attempt to reduce these risks and provide for an earlier minimally invasive repair, it is aimed to develop and characterize an innovative alternative using a unique reverse thermal gel. This study focuses on characterization of the physical and biological properties of the polymer and its in vivo applicability. Based on the knowledge and benchmarking, the “ideal” biomaterial should have the following characteristics: stability in amniotic fluid, limited permeability, biocompatibility, biologically functional, nontoxic, ability to support cellular functions, and in vivo applicability. The results demonstrate that the polymer possesses a unique ultrastructure, is stable in amniotic fluid, possesses limited yet predictable permeability, biocompatible with cells exposed in neural tube defects, is nontoxic, and can support cellular migration. These characteristics make it a potential novel alternative to open fetal repairs.
A facile and versatile method for the synthesis of Janus graphene oxide (GO) nanosheets with different structures is reported. Based on electrostatic assembly, Janus GO nanosheets can be easily functionalized with a template polymer or be defunctionalized by altering the ionic strength. By using this approach, Janus GO nanosheets are prepared successfully with hydrophobic polystyrene chains on one side and hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) chains on the other side.
Recombinant protein design allows modular protein domains with different functionalities and responsive behaviors to be easily combined. Inclusion of these protein domains can enable recombinant proteins to have complex responses to their environment (e.g., temperature‐triggered aggregation followed by enzyme‐mediated cleavage for drug delivery or pH‐triggered conformational change and self‐assembly leading to structural stabilization by adjacent complementary residues). These “smart” behaviors can be tuned by amino acid identity and sequence, chemical modifications, and addition of other components. A wide variety of domains and peptides have smart behavior. This review focuses on protein designs for self‐assembly or conformational changes due to stimuli such as shifts in temperature or pH.
Manipulated roughness has been etched on nanofibers to modulate adsorption of serum proteins for serum‐free cells cultivation. Mixtures of Polycaprolactone and Pluronic with various blending ratios are electrospun to nanofibers and Pluronic is subsequently leached out by methanol. Electron microscopy reveals that surface roughness of the nanofibers is changed according to the contents of Pluronic. Both weight loss monitoring and NMR spectroscopy confirm that all Pluronic is leached out after methanol treatment. Water swelling ratio and protein adsorption of rougher nanofibers are higher than those of smoother ones. Also, when serum incorporation on the nanofibers is estimated in 0.01–10% serum solution, rougher nanofibers show higher serum incorporation and those soaked in 10% serum solution are employed for serum‐free cell cultivation. Viability of the cells cultivated on rougher nanofibers is much higher after 24 h. Thus, Pluronic‐induced leaching‐out strategy can be potentially employed for fabricating roughness on nanofibers for enhancing protein adsorption for serum‐free cell cultivation.
Graphene oxide (GO) is effective in catalyzing a wide variety of organic reactions and a few types of polymerization reactions. No radical chain polymerizations catalyzed by GO have been reported. In this article, we probe the catalytic role and acceleration effect of GO for self‐initiated radical chain polymerizations of acrylic acid (AA) in the presence of GO and a pre‐existing polymer, poly(N‐vinylpyrrolidone) (PVP), from a calorimetric perspective. Gelation experiments and DSC studies show that GO can function as a catalyst to accelerate the radical chain polymerization of AA. Isothermal polymerization kinetic data shows that the addition of GO diminishes the induction periods and increases the polymerization rates, as indicated by the much enhanced overall kinetic rate constants and lowered activation energies. The catalytic effect of GO for the polymerization of AA is attributed to the acidity of GO and the hydrogen bonding interactions between GO and monomer molecules and/or polymers.
A nanoassembled drug delivery system for anticancer treatment, formed by the host–guest interactions between paclitaxel (PTX) and β‐cyclodextrin (β‐CD) modified poly(acrylic acid) (PCDAA), is successfully prepared. After such design, the aqueous solubility of PTX is greatly increased from 0.34 to 36.02 μg mL?1, and the obtained PCDAA‐PTX nanoparticles (PCDAA‐PTX NPs) exhibit a sustained PTX release behavior in vitro. In vitro cytotoxicity finds that PCDAA‐PTX NPs can accumulate significantly in tumor cells and remain the pharmacological activity of PTX. The in vivo real‐time biodistribution of PCDAA‐PTX NPs is investigated using near‐infrared fluorescence imaging, indicating that the PCDAA‐PTX NPs can effectively target to the tumor site by the enhanced permeability and retention effect in H22 tumor‐bearing mice. Through in vivo antitumor examination, PCDAA‐PTX NPs exhibit superior efficacy in impeding the tumor growth compared to the commercially available Taxol®.
Multivalent aptamer–siRNA conjugates containing multiple mucin‐1 aptamers and BCL2‐specific siRNA are synthesized, and doxorubicin, an anthracycline anticancer drug, is loaded into these conjugates through intercalation with nucleic acids. These doxorubicin‐incorporated multivalent aptamer–siRNA conjugates are transfected to mucin‐1 overexpressing MCF‐7 breast cancer cells and their multidrug‐resistant cell lines. Doxorubicin‐incorporated multivalent aptamer–siRNA conjugates exert promising anticancer effects, such as activation of caspase‐3/7 and decrease of cell viability, on multidrug‐resistant cancer cells because of their high intracellular uptake efficiency. Thus, this delivery system is an efficient tool for combination oncotherapy with chemotherapeutics and nucleic acid drugs to overcome multidrug resistance.
Here, it is demonstrated that X‐ray nanotomography with Zernike phase contrast can be used for 3D imaging of cells grown on electrospun polymer scaffolds. The scaffold fibers and cells are simultaneously imaged, enabling the influence of scaffold architecture on cell location and morphology to be studied. The high resolution enables subcellular details to be revealed. The X‐ray imaging conditions were optimized to reduce scan times, making it feasible to scan multiple regions of interest in relatively large samples. An image processing procedure is presented which enables scaffold characteristics and cell location to be quantified. The procedure is demonstrated by comparing the ingrowth of cells after culture for 3 and 6 days.
Poly(amido amine)s' (PAAs) versatility are nearly unique among stepwise polymers. Different functional groups can be easily introduced into these polymers to add functionality such as cell internalization, charge‐shift, bioreducibility, “stealth” properties, and targeting moieties, while maintaining the bulk structural integrity of these polymers. The poly(amido amine)s are used as a unique research platform to elucidate their complex structure–function relationship. It is shown that guanidinium group, carboxyl group, disulfide bond, alkyl chain, branching, acetyl groups, benzoyl groups, and quaternary nicotinamide moieties can influence many steps of gene delivery, such as DNA condensation, cellular uptake, endosomal escape, nuclear entry, and finally gene expression. The authors systematically discuss the structure–function correlations of PAAs for gene delivery, and elaborate how the properties of polymers can be adjusted by changing the polymeric structure.
Although chronic lymphocytic leukemia (CLL) is the most common adult leukemia in Western world, it remains incurable with conventional chemotherapeutic agents. Tumor necrosis factor (TNF)‐related apoptosis‐inducing ligand (TRAIL) is an antitumor candidate in cancer therapy. This study examines the proapoptotic effects of poly(propylene imine) (PPI) glycodendrimers modified with the maltotriose residues (PPI‐G4‐OS‐Mal‐III and PPI‐G4‐DS‐Mal‐III) on the TNF family in CLL cells. The combination of an understanding of the signaling pathways associated with CLL and the development of a molecular profiling is a key issue for the design of personalized approaches to therapy. Gene expression is determined with two‐color microarray 8 × 60K. The findings indicate that PPI‐G4‐OS/DS‐Mal‐III affect gene expression from the TRAIL apoptotic pathway and exert a strong effect on CLL cells comparable with fludarabine. Dendrimer‐targeted technology may well prove to bridge the gap between the ineffective treatment of today and the effective personalized therapy of the future.
Aligned poly(l ‐lactide)/poly(methyl methacrylate) binary blend fibers and mats loaded with a chimeric green fluorescence protein having a bioactive peptide with hydroxyapatite binding and mineralization property are prepared by pressurized gyration. The effect of processing parameters on the product morphologies, and the shape memory properties of these samples are investigated. Integration of hydroxyapatite nanoparticles into the fiber assembly is self‐directed using the hydroxyapatite‐binding property of the peptide genetically engineered to green fluorescence protein. Fluorescence microscopy analysis corroborated with Fourier transform infrared spectroscopy (FTIR) data confirms the integration of the chimeric protein with the fibers. An enzyme based remineralization assay is conducted to study the effects of peptide‐mediated mineralization within the fiber mats. Raman and FTIR spectral changes observed following the peptide‐mediated mineralization provides an initial step toward a soft‐hard material transition. These results show that programmable shape memory properties can be obtained by incorporating genetically engineered bioactive peptide domains into polymer fibers.
Solution behavior of thermo‐responsive polymers and their complexes with biological macromolecules may be affected by environmental conditions, such as the concentration of macromolecular components, pH, ion concentration, etc. Therefore, a thermo‐responsive polymer and its complexes should be characterized in detail to observe their responses against possible environments under physiological conditions before biological applications. To briefly indicate this important issue, thermo‐responsive block copolymer of quaternized poly(4‐vinylpyridine) and poly(oligoethyleneglycol methyl ether methacrylate) as a potential nonviral vector has been synthesized. Polyelectrolyte complexes of this copolymer with the antisense oligonucleotide of c‐Myc oncogene are also thermo‐responsive but, have lower LCST (lower critical solution temperature) values compared to individual copolymer. LCST values of complexes decrease with molar ratio of macromolecular components and presence of salt. Dilution of solutions also affects solution behavior of complexes and causes a significant decrease in size and an increase in LCST, which indicates possible effects of severe dilutions in the blood stream.
下载免费PDF全文