Fluoroalkene chemistry: Part 2. Reactions of thiols with some toxic 1,2-dichlorinated polyfluorocycloalkenes

1,2-Dichlorotetrafluorocyclobutene, 1,2-dichlorohexafluorocyclopentene and 1,2-dichlorooctafluorocyclohexene were treated with an equimolar amount of benzenethiol, 2-methoxybenzenethiol, 3-methoxybenzenethiol and 4-methoxybenzenethiol in acetonitrile with potassium carbonate. Each combination of fluoroalkene and thiol gave a mixture of mono and bis vinyl substitution products whose proportions depended on the ring size of the fluorocycloalkene and the size and electronic characteristics of the thiol. Treatment of 1,2-dichlorotetrafluorocyclobutene with one or two molar equivalents of N-acetylcysteine isopropyl ester in acetonitrile with potassium carbonate produced the mono and bis vinyl substitution products accordingly. The results support the contention that the high inhalation toxicity of the fluorocycloalkenes is due to reaction with two molar equivalents of biological thiols in the lung.     

Selective nucleophilic substitution reactions on poly(epichlorohydrin) using aromatic and aliphatic thiol compounds

Poly(epichlorohydrin) has been modified chemically using aromatic and aliphatic thiol compounds. The reactivity and kinetics of these modifiers with respect to substitution and elimination was studied. Therefore, the chemical structure of the reaction products was analysed using ¹³C NMR, ¹H NMR and ¹³C-DEPT spectroscopies. It is shown that both, aromatic as well as aliphatic thiols, are highly selective with respect to nucleophilic substitution as reaction conditions can be found which allow one to achieve degrees of modification of up to 90% without any elimination side-reaction. As a consequence no degradative chain-scission takes place what has been confirmed by GPC analysis.A comparison between both types of thiol modifiers shows that aromatic ones react faster and that higher degrees of modification are reached than with their aliphatic homologues.     

Effects of aromatic thiols on thiol-disulfide interchange reactions that occur during protein folding

The folding of disulfide containing proteins from denatured protein to native protein involves numerous thiol-disulfide interchange reactions. Many of these reactions include a redox buffer, which is a mixture of a thiol (RSH) and the corresponding disulfide (RSSR). The relationship between the structure of RSH and its efficacy in folding proteins in vitro has been investigated only to a limited extent. Reported herein are the effects of aliphatic and especially aromatic thiols on reactions that occur during protein folding. Aromatic thiols may be particularly efficacious as their thiol pK(a) values and reactivities match those of the in vivo catalyst, protein disulfide isomerase (PDI). This investigation correlates the thiol pK(a) values of aromatic thiols with their reactivities toward small molecule disulfides and the protein insulin. The thiol pK(a) values of nine para-substituted aromatic thiols were measured; a Hammett plot constructed using sigma(p-) values yielded rho = -1.6 +/- 0.1. The reactivities of aromatic and aliphatic thiols with 2-pyridyldithioethanol (2-PDE), a small molecule disulfide, were determined. A plot of reactivity versus pK(a) of the aromatic thiols had a slope (beta) of 0.9. The ability of these thiols to reduce (unfold) the protein insulin correlates strongly with their ability to reduce 2-PDE. Since the reduction of protein disulfides occurs during protein folding to remove mismatched disulfides, aromatic thiols with high pK(a) values are expected to increase the rate not only of protein unfolding but protein folding as well.     

Acyl iodides in organic synthesis. Reaction of acetyl iodide with thiols

The direction of reactions of acetyl iodide with aliphatic, aromatic, and heterocyclic thiols is determined by the thiol acidity and steric factors. Acetyl iodide reacted with aliphatic thiols, including trialkylsilylsubstituted derivatives R(CH₂) _n SH (R = Me, n = 3; R = Me₃Si, n = 3; R = Et₃Si, n = 2), to give the corresponding ethanethioates R(CH₂) _n SCOMe. Benzenethiol was oxidized with acetyl iodide to diphenyl disulfide. The reaction of acetyl iodide with 2-sulfanylethanol afforded 2-(2-iodoethyldisulfanyl)ethyl acetate as a result of three consecutive-parallel processes: acylation, iodination, and oxidation of the initial compound. 1,3-Benzothiazole-2-thiol reacted with acetyl iodide only at the nitrogen atom to give quaternary salt, whereas the SH group remained intact.     

Fluoroalkene chemistry: Part 3. Reactions of arylthiols with perfluoroisobutene, perfluoropropene and chlorotrifluoroethene

Reactions of perfluoroisobutene (PFIB), perfluoropropene (PFP) and chlorotrifluoroethene (CTFE) with benzenethiol and 2-methoxybenzenethiol in acetonitrile, with potassium carbonate as base, were compared. PFIB reacted with benzenethiol to give ketene thioacetal (CF₃)₂CC(SAr)₂ and with 2-methoxybenzenethiol to give mono- and bis-vinyl species (CF₃)₂CCFSAr and (CF₃)₂CC(SAr)₂. PFP reacted with both thiols to give the addition product CF₃CFHCF₂SAr and vinyl isomers CF₃CFCFSAr (6:1 E/Z ratio). CTFE reacted with several methoxy-substituted arylthiols to give addition products of structure CFClHCF₂SAr. The arylthiols used throughout the study imitate biological thiols. Inhalation toxicities of the fluoroalkenes decrease in the order PFIB > PFP > CTFE and correlate with their reactivities towards the model thiols, supporting the current view that their toxicity relates to their ability to react with biological thiols.     

Synthese d'une Serie de 2-(F-alkyl) Thioenol Ethers

2-(F-alkyl) enol ethers react easily with thiols. With one equivalent of the thiol, the corresponding 2-(F-alkyl) thioenol ethers were formed via an addition-elimination mechanism. With two equivalents of thiol or with one equivalent of 1,2-ethanedithiol, 2-(F-alkyl) thioacetals or 2-(F-alkyl) dithiolanes were obtained in good yields.     

Microstructure elucidation of poly(epichlorohydrin) modified with thiol compounds using one- and two-dimensional NMR spectroscopy

Poly(epichlorohydrin) has been modified chemically using aromatic and aliphatic thiol compounds. The NMR results show that using both aromatic and aliphatic thiols, one achieves degrees of modification of up to 90% without any elimination side reaction. As a consequence no degradative chain-scission takes place. A microstructural analysis of the modified polymers has been carried out by ¹³C NMR, ¹H NMR and ¹³C DEPT spectroscopy. Additionally, 2D heteronuclear correlated spectroscopy (HMQC and HMBC) were used in order to determine the chemical shifts of quaternary carbons.     

An efficient and convenient method for the preparation of disulfides from thiols using oxygen as oxidant catalyzed by tert-butyl nitrite

An efficient and convenient tert-butyl nitrite-catalyzed selective aerobic oxidation of thiols has been developed. Under the optimal reaction conditions, a number of thiol derivatives including aromatic thiols, heteroaromatic thiols and aliphatic thiols can be converted into their corresponding disulfides in good to excellent yields.     

含氧光敏引发体系的研究——V.硫醇添加剂的作用

采用二笨甲酮/三乙胺/硫醇体系作为引发剂,在含氧条件下进行了MMA光聚合反应的动力学研究。实验结果指出,芳香族和脂肪族的硫醇都能加速体系中的光氧化反应,使聚合反应诱导期缩短,芳香族硫醇对聚合反应的加速作(?)比脂肪族硫醇有效。例如,对-甲苯硫酚作添加剂时,使相对量子收率φO_2/φN_2增加到1.8。     

The determination of thiols with diphenylpicrylhydrazyl as a spectrophotometric reagent

Diphenylpicrylhydrazyl (DPPH), a stable, intensely purple free radical, is used as a reagent in the quantitative determination of various aromatic and aliphatic thiols by indirect spectrophotometric analysis. Plots of degree of reaction vs. time show that thiophenol and its derivatives react more quickly than aliphatic thiols with DPPH. Calibration plots are linear over the concentration range 0.05-3.00 x 10(-5)M thiol. The average relative error is in the range 1-2% and the absolute standard deviations range up to 0.50 x 10(-6)M.     

Chiral phosphoric acid-catalyzed addition of thiols to N-acyl imines: access to chiral N,S-acetals

The first catalytic asymmetric method to prepare enantioenriched N,S-acetals using chiral BINOL phosphoric acids is reported. The reaction combines N-acyl imines with thiols to generate products in excellent yield and enantioselectivity. The addition reaction could also be achieved with an exceptional substrate to catalyst (S/C) molar ratio. Electron-rich and electron-deficient aromatic N-acyl imines, as well as a broad range of aliphatic and aromatic thiols, showed excellent reactivity.     

Oxidative transformation of thiols to disulfides promoted by activated carbon-air system

Efficient oxidative transformation of thiols to disulfides took place in the presence of activated carbon under an oxygen (or air) atmosphere. The present oxidation method is available not only for a variety of thiols such as simple aromatic and aliphatic thiols but also for 3,4-dihydropyrimidin-2(1H)-thiones and N-Boc-l-cysteine.     

Solvent-Free Acetylation of Thiols Under Catalysis of MgBr2·OEt2

Solvent-free protection of aromatic and aliphatic thiols with acetic anhydride was performed at room temperature under trace quantities of magnesium bromide ethyl etherate, affording rapid formation of various thiol esters in excellent yields.     

l-Proline promoted cross-coupling of vinyl bromide with thiols catalyzed by CuBr in ionic liquid

A method for the synthesis of vinyl sulfides by the coupling of vinyl bromides with thiols using the copper(I) bromide as catalyst and l-proline as ligand was reported. The best yields were obtained in the ionic liquid [Bmim]BF₄ with the retention of stereochemistry. This protocol is palladium-free, tolerates both aromatic and aliphatic thiols, possesses good selectivity between alcohol and thiol, and does not require the use of expensive or air-sensitive additives.     

Synthetic and structural investigations of alkali metal diamine bis(phenolate) complexes

Two lithium and one sodium diamine bis(phenolate) complexes have been prepared and characterised by X-ray crystallography and NMR spectroscopy. Two parent diamine bis(phenol) ligands were utilised in the study (1-H2 and 2-H2). Dimeric (1-Li2)(2) was prepared by treating 1-H2 with two molar equivalents of n-butyllithium in hydrocarbon solvent. It adopts a ladder-like structure in the solid state, which appears to deaggregate in C6D6 solution. The monomeric (hence, dinuclear) TMEDA-solvated species [2-Li(2).(TMEDA)] has two chemically unique Li atoms in the solid state and is prepared by reacting 2-H2 with two molar equivalents of n-butyllithium in hydrocarbon solvent, in the presence of N,N,N',N'-tetramethylethylenediamine (TMEDA). Finally, the dimeric sodium-based [2-Na(2) x (OEt2](2) was prepared by reacting 1-H2 with two molar equivalents of freshly prepared n-butylsodium in a hydrocarbon-diethyl ether medium. The complex adopts a Na4O4) cuboidal structure in the solid state, which appears to remain intact in C6D6 solution.     

Some derivatives of morpholinophosphorodichloridate and dichloridothioate

Morpholinophosphorodichloridate and dichloridothioate reacted with amines (2 molar equivalents) to give the amidic chlorides which were treated with nucleophilic reagents to give sixty-four derivatives. However the dichloridothioate with primary amines (1 molar equivalent) only gave diamidic thioates, the reasons for the failure to obtain the expected amidochloridothioates are briefly discussed.     

Synthesis of vinyl sulfides under base-free conditions using selenium ionic liquid

A very simple procedure is described for the efficient synthesis of vinyl sulfides by hydrothiolation of terminal alkynes using 1-n-butyl-3-methylimidazolium methylselenite, [bmim][SeO₂(OCH₃)]. The reaction proceeds cleanly under mild, base-free conditions and was performed with aromatic and aliphatic thiols.     

One-pot three-step thioconjugate addition-oxidation-Diels-Alder reactions of ethyl propiolate

Ethyl propiolate undergoes one-pot three-step thioconjugate addition-oxidation-Diels-Alder cycloaddition when treated with a variety of thiols in the presence of catalytic base, meta-chloroperbenzoic acid, lithium perchlorate, and cyclopentadiene. The reaction of S-aryl thiols is catalyzed by trialkylamines, and the reaction of aliphatic thiols requires catalytic alkoxide base. Yields of the major diastereomer of the conveniently functionalized bicyclic products range from 47% to 81% depending upon the thiol reactant, which compares favorably to yields observed when the entire synthesis is performed step-by-step.     

Zirconium-catalyzed asymmetric Kabachnik–Fields reactions of aromatic and aliphatic aldehydes

An effective catalyst has been developed for the three-component reaction of aldehydes, anilines and phosphites in an asymmetric catalytic Kabachnik–Fields reaction to give α-aminophosphonates. A catalyst was sought that would give high asymmetric inductions for aromatic and, and more particularly, for aliphatic aldehydes since there has not previously been an effective catalyst developed for this class of aldehydes. The optimal catalyst is prepared from three equivalents of the 7,7′-di-t-butylVANOL ligand, one equivalent of N-methylimidazole and one equivalent of zirconium tetraisopropoxide. This catalyst was most efficient in the presence of 10 mol% benzoic acid. Optimal conditions for aryl aldehydes required the use of 3,5-diisopropyl-2-hydroxyaniline and gave the aryl α-aminophosphonates in up to 96% yield and 98% ee over 11 different aryl aldehydes. The best aniline for aliphatic aldehydes was found to be 3-t-butyl-2-hydroxyaniline and gave the corresponding phosphonates in up to 83% yield and 97% ee over 18 examples. The asymmetric inductions for aliphatic aldehydes were comparable with those for aromatic aldehydes with a mean induction of 90% ee for the former and 91% ee for the latter. The best method for the liberation of the free amine from the aniline substituted α-aminophosphonates involved oxidation with N-iodosuccinimide.

An effective catalyst has been developed for the three-component reaction of aldehydes, anilines and phosphites in an asymmetric catalytic Kabachnik–Fields reaction to give α-aminophosphonates.     

Radical nucleophilic substitution of 2-(4-halophenyl)-2-methyl-1-chloropropane with enolate ions of ketones

The photoinitiated reaction of 2-(4-halophenyl)-2-methyl-1-chloropropane 2a,b (halogen=Br, I, respectively) with the anions of pinacolone (3a) and acetophenone (3b) either in DMSO or in liquid ammonia are reported. In DMSO, the main reaction is the SRN1 nucleophilic substitution at the aromatic (Csp2-halogen) center with substitution or reduction at the aliphatic (Csp3-Cl) one. In liquid ammonia, the main reaction is substitution at the aromatic C-halogen site. This difference in product distribution is ascribed to modifications in the rate constant of Csp3-Cl dissociation of the radical anions proposed as intermediates in going from DMSO (rt) to liquid NH3 (-33 degrees C).