Comparative study of three immunoassays based on monoclonal antibodies for detection of the pesticide parathion-methyl in real samples

Three immunoassay systems: indirect, direct competitive enzyme-linked immunosorbent assay (IC-ELISA and DC-ELISA), fluorescence polarization immunoassay (FPIA) based on monoclonal antibodies for the detection of parathion-methyl (PM) were developed and optimized. Several PM derivatives (haptens) were conjugated to proteins and fluoresceinthiocarbamyl ethylenediamine (EDF) to obtain immunogens and competitors. The influence of immunogen and competitor structures on the assay performance was investigated. IC-ELISA was the most sensitive of all techniques developed, with a detection limit of 0.08 ng ml⁻¹, but assay time was the longest (3.5 h per 96-well microtitre plate). DC-ELISA was easier to perform and quicker (1.5 h per 96-well microtitre plate) but less sensitive than IC-ELISA (detection limit was 0.5 ng ml⁻¹). FPIA was the fastest and simplest (7 min per 10 samples) but the least sensitive (detection limit was 15 ng ml⁻¹) technique. The methods were characterized by high specificity and reproducibility. The cross-reactivity for parathion-ethyl was around 30-40% for IC-ELISA and FPIA, but significantly higher (125%) for DC-ELISA. The immunoassays were applied to the analysis of PM residues in different food and environmental matrices. Methanol extracts of vegetable, fruit and soil samples were used for the analysis. Recoveries for most spiked samples averaged between 85 and 110%. The methods developed can be used for screening of food and environmental samples for PM residues without complicated clean-up.     

Determination of chloramphenicol in milk by a fluorescence polarization immunoassay

A procedure for the determination of the drug chloramphenicol using a fluorescence polarization immunoassay (FPIA) was proposed. The optimum pairs of antibodies and antigens labeled with fluorescein were chosen, and the analytical characteristics of the procedure were determined. A rapid procedure for milk sample preparation with the use of a saturated solution of ammonium sulfate was optimized. The total time of sample preparation and determination of chloramphenicol in milk was no longer than 10 min. The detection limits of chloramphenicol in water and milk were 10 ng/mL and 20 μg/kg, respectively. The procedure developed for the determination of chloramphenicol was tested in the analysis of model and real milk samples. It was found that some milk samples contained chloramphenicol in concentrations of 38–41 μg/kg, which are several times higher than the maximum permissible concentration (MPC) (10 μg/kg).     

Simultaneous determination of two anti-inflammatory drugs in serum using isopotential fluorimetry

The simultaneous determination of 6-methoxy-2-naphthylacetic acid (6MNA) and diflunisal in serum samples using the combination of matrix isopotential synchronous fluorescence (MISF) and first derivative technique is proposed. 6MNA and diflunisal exhibit overlapped spectra and serum produces background fluorescence that precludes the direct determination of these anti-inflammatory drugs by conventional fluorimetry. This method provides good analytical results for determination of compounds in samples with unknown background fluorescence. The method was applied for the simultaneous determination of 6MNA and diflunisal in serum samples at concentrations between 20-200 and 100-1000 ng mL⁻¹, respectively, by means of absolute values of first derivative of synchronous scan at 247.9/364.0 and 262.6/392.4 nm for 6MNA and diflunisal, respectively. In order to obtain maximum sensitivity and adequate selectivity, factors affecting fluorescence intensity were studied. As a result, the analyses were performed in water at a pH of 7.2, adjusted by using sodium dihydrogen phosphate/hydrogen phosphate (0.1 M) as a buffer solution. Serum samples were diluted 200 times. Analytical parameters of the proposed method were calculated according to the error propagation theory. The limit of detection calculated according to Clayton was 15.8 and 63.0 ng mL⁻¹ for 6MNA and diflunisal, respectively. The sensitivity, repeatability and reproducibility achieved with the proposed method were adequate for the determination of these anti-inflammatory agents in serum samples.     

Use of Cdse/ZnS quantum dots for sensitive detection and quantification of paraquat in water samples

Based on the highly sensitive fluorescence change of water-soluble CdSe/ZnS core-shell quantum dots (QD) by paraquat herbicide, a simple, rapid and reproducible methodology was developed to selectively determine paraquat (PQ) in water samples. The methodology enabled the use of simple pretreatment procedure based on the simple water solubilization of CdSe/ZnS QDs with hydrophilic heterobifunctional thiol ligands, such as 3-mercaptopropionic acid (3-MPA), using microwave irradiation. The resulting water-soluble QDs exhibit a strong fluorescence emission at 596 nm with a high and reproducible photostability. The proposed analytical method thus satisfies the need for a simple, sensible and rapid methodology to determine residues of paraquat in water samples, as required by the increasingly strict regulations for health protection introduced in recent years. The sensitivity of the method, expressed as detection limits, was as low as 3.0 ng L⁻¹. The lineal range was between 10–5 × 10³ ng L⁻¹. RSD values in the range of 71–102% were obtained. The analytical applicability of proposed method was demonstrated by analyzing water samples from different procedence.     

Direct detection of Δ9-tetrahydrocannabinol in saliva using a novel homogeneous competitive immunoassay with fluorescence quenching

For the detection of the major active component of cannabis, Δ9-tetrahydrocannabinol (THC) in aqueous samples, a homogeneous competitive immunoassay based on fluorescence quenching induced by fluorescence resonance energy transfer (FRET) has been developed. The fluorescence of anti-THC-antibody, labeled with fluorescence dye DY-481XL, can be quenched after its binding to THC-BSA-quencher conjugate (bovine serum albumin coupled with THC and another fluorescence dye, DYQ-661, as quencher). This quenching effect is inhibited when the antibodies bind to free THC in aqueous sample, thus competing for binding sites with the THC-BSA-quencher conjugate. The extent of the inhibition corresponds to the concentration of THC in the samples. The assay principle is simple and the test duration is within 10 min. The detection limit for THC in buffer was 2 ng mL⁻¹. In pooled saliva samples a detection limit of 50 ng mL⁻¹ was achieved.     

An ultrasensitive quantum dots fluorescent polarization immunoassay based on the antibody modified Au nanoparticles amplifying for the detection of adenosine triphosphate

In this work, an ultrasensitive fluorescent polarization immunoassay (FPIA) method based on the quantum dot/aptamer/antibody/gold nanoparticles ensemble has been developed for the detection of adenosine triphosphate (ATP). DNA hybridization is formed when ATP is present in the PBS solution containing the DNA-conjugated quantum dots (QDs) and antibody-AuNPs. The substantial sensitivity improvement of the antibody-AuNPs-enhanced method is mainly attributed to the slower rotation of fluorescent unit when QDs-labeled oligonucleotides hybridize with antibody modified the gold nanoparticle. As a result, the fluorescent polarization (FP) values of the system increase significantly. Under the optimal conditions, a linear response with ATP concentration is ranged from 8 × 10⁻¹² M to 2.40 × 10⁻⁴ M. The detection limit reached as low as 1.8 pM. The developed work provides a sensitive and selective immunoassay protocol for ATP detection, which could be applied in more bioanalytical systems.     

A simple and fast method for chlorsulfuron and metsulfuron methyl determination in water samples using multiwalled carbon nanotubes (MWCNTs) and capillary electrophoresis

A new method to determine metsulfuron methyl (MSM) and chlorsulfuron (CS) in different water samples was developed. It consists in a solid phase extraction (SPE) procedure using multiwalled carbon nanotubes (MWCNTs) as sorbent material in combination with capillary zone electrophoretic determination. To carry out the pre-concentration step, a simple flow injection system was developed and optimized. Thus, 250 μL of aqueous solution containing methanol 50% (v/v) and acetonitrile 2% (v/v) as eluent, 10 mL of sample and a flow rate of 1.15 mL min⁻¹ were selected. The CE variables also were optimized. A rapid determination and good resolution of two herbicides were obtained within 9 min using a simple electrophoretic buffer (50 mmol L⁻¹ sodium tetraborate with 3% of methanol, pH = 9.0). Under the optimum conditions, the calibration curves were linear between 0.5 and 6 μg L⁻¹ for MSM and CS with R² = 0.995 and 0.997, respectively. The repeatability of the proposed method, expressed as relative standard deviation (RSD), varied between 4.1% and 5.4% (n = 10) and the detection limits for MSM and CS were 0.40 and 0.36 μg L⁻¹, respectively. Good results were achieved when the proposed method was applied to spiked real water samples. The recoveries percentages of the two analytes were over the range 86-108%.     

Use of 2-mercaptopyridine for the determination of alkylating agents in complex matrices: application to dimethyl sulfate

A rapid and sensitive method for the determination of alkylating agents in complex reaction mixtures was developed and characterized. Analyses are based on the alkylation of 2-mercaptopyridine by the analyte; the derivative is separated by RP-HPLC and measured by fluorescence detection. When applied to the determination of dimethyl sulfate, the method is linear over four orders of magnitude: 0.01-10 μg mL⁻¹. By using recrystallized 2-mercaptopyridine, quantitation limits of 10 ng mL⁻¹ can be achieved. Precision of the assay is 2% R.S.D. in the 1-10 μg mL⁻¹ range and about 15% R.S.D. at 10 ng mL⁻¹. Studies on the pH dependence of the derivatization reaction were key to minimizing interference from the dimethyl sulfate degradation product, monomethyl sulfate, in quenched reaction samples.     

Synchronous fluorescence determination of DNA based on the interaction between methylene blue and DNA

The fluorescence intensity of methylene blue (MB) quenched by DNA in the pH range of 6.5-8.0 was studied with synchronous fluorescence technology. A novel method for detecting single-stranded and double-stranded DNA was developed. The decreased fluorescence intensity at 664 nm is in proportion to the concentration of DNA in the range of 0.28-11.0 μmol L⁻¹ for ctDNA, 0.14-8.25 μmol L⁻¹ for thermally denatured ctDNA and 0.28-8.25 μmol L⁻¹ for hsDNA. The detection limits (S/N = 3) are 0.11, 0.04 and 0.04 μmol L⁻¹, respectively. The method is rapid, selective, and the reagents are lower toxic. It has been used for the determination of DNA in synthetic samples with good satisfaction. In addition, the interaction modes between MB and ctDNA and the mechanism of the fluorescence quenching were also discussed in detail. The experimental results from absorption spectra and fluorescence polarization indicate that the possible interaction modes between MB and DNA are the electrostatic binding and the intercalation binding.     

Functionalized cadmium sulfide quantum dots as fluorescence probe for silver ion determination

CdS quantum dots (QDs) modified with l-cysteine has been prepared by one step. They are water-soluble and biocompatible. To improve CdS QDs stability and interaction between silver ion and functionalized CdS QDs in aqueous solution, some amounts of fresh l-cysteine were added to functionalized CdS solution. Based on the characteristic fluorescence enhancement of CdS QDs at 545 nm by silver ions in the presence of some amounts of fresh l-cysteine, simultaneously, a gradual red shift of fluorescence emission bands of CdS QDs from 545 to 558 nm was observed. A simple, rapid, sensitive and specific detection method for silver ion was proposed. Under optimum conditions, the fluorescence intensity of CdS QDs is linearly proportional to silver concentration from 2.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol/L with a detection limit of 5.0 × 10⁻⁹ mol/L. In comparison with single organic fluorophores, functionalized CdS quantum dots are brighter, more stable against photobleaching, and don’t suffer from blinking. Furthermore, owing to the fluorescence enhancement effect of CdS QDs by silver ion, the proposed method showed lower detection blank and higher sensitivity. Possible fluorescence enhancement mechanism was also studied.     

New approach to quantitative analysis of benzo[a]pyrene in food supplements by an immunochemical column test

A quantitative immunochemical rapid test for sensitive determination of benzo[a]pyrene (BAP) as a model analyte was developed making use of a handheld reader for results evaluation. The covalent immobilization of antibodies to different Sepharose gels, i.e., CNBr-activated Sepharose 4B and CNBr-activated Sepharose 4 Fast Flow was compared with adsorption to a polyethylene support. The lowest limits of detection (LOD) were 4 ng L⁻¹ and 40 ng L⁻¹, respectively, using optimized assay conditions. The developed test was applied to food supplements (garlic, black radish and maca), including a pretreatment procedure. LOD of 9 ng kg⁻¹ and linear range of 13-80 ng kg⁻¹ were obtained. Results of BAP determination in naturally contaminated samples were confirmed by high-performance liquid chromatography coupled to fluorescence detection and a good correlation was achieved. We suggest that the developed test format can be used to quantitative detection of the low molecular weight analytes, such as mycotoxins, pesticides, other pollutants in food and environmental samples.     

Determination of nucleic acids based on the fluorescence quenching of Hoechst 33258 at pH 4.5

It was found the strong fluorescence emitted by the bis-benzimidazole derivative Hoechst 33258 at 490 nm could be efficiently quenched in pH 4.5 buffer when nucleic acids were added. Analysis of fluorescence intensity showed that the procedure was a static quenching dominated one, which was also demonstrated by the electron absorption spectra and lifetime of the excited state. The binding constant and numbers of binding sites were obtained from the Scatchard plot. The decreased fluorescence intensity was in proportion to the concentration of nucleic acids in the range 40-1800 ng ml⁻¹ for dsDNA and 26-1700 ng ml⁻¹ for ssDNA. The limits of detection were 12 and 8 ng ml⁻¹, respectively. The sensitivity of the method was about 3.4 times higher for dsDNA detection and 5.4 times higher for ssDNA detection compared with the widely used fluorescence enhancement method using the same dye. Application results to synthetic samples showed simplicity, rapidity and satisfactory reproducibility of the presented method. Measurement of real samples extracted from leaves of Crassula argentea and E. coli genome also gave satisfactory results, which were in good agreement with those obtained using spectrophotometric method.     

A functionalized gold nanoparticles and Rhodamine 6G based fluorescent sensor for high sensitive and selective detection of mercury(II) in environmental water samples

A gold-nanoparticles (Au NPs)-Rhodamine 6G (Rh6G) based fluorescent sensor for detecting Hg (II) in aqueous solution has been developed. Water-soluble and monodisperse gold nanoparticles (Au NPs) has been prepared facilely and further modified with thioglycolic acid (TGA). Free Rh6G dye was strongly fluorescent in bulk solution. The sensor system composing of Rh6G and Au NPs fluoresce weakly as result of fluorescence resonance energy transfer (FRET) and collision. The fluorescence of Rh6G and Au NPs based sensor was gradually recovered due to Rh6G units departed from the surface of functionalized Au NPs in the presence of Hg(II). Based on the modulation of fluorescence quenching efficiency of Rh6G-Au NPs by Hg(II) at pH 9.0 of teraborate buffer solution, a simple, rapid, reliable and specific turn-on fluorescent assay for Hg(II) was proposed. Under the optimum conditions, the fluorescence intensity of sensor is proportional to the concentration of Hg(II). The calibration graphs are linear over the range of 5.0 × 10⁻¹⁰ to 3.55 × 10⁻⁸ mol L⁻¹, and the corresponding limit of detection (LOD) is low as 6.0 × 10⁻¹¹ mol L⁻¹. The relative standard deviation of 10 replicate measurements is 1.5% for 2.0 × 10⁻⁹ mol L⁻¹ Hg(II). In comparison with conventional fluorimetric methods for detection of mercury ion, the present nanosensor endowed with higher sensitivity and selectivity for Hg(II) in aqueous solution. Mercury(II) of real environmental water samples was determined by our proposed method with satisfactory results that were obtained by atomic absorption spectroscopy (AAS).     

Simple and sensitive fluorometric sensing of malachite green with native double-stranded calf thymus DNA as sensing material

A novel fluorometric sensing of malachite green is proposed in this paper. The native double-stranded calf thymus DNA was used as sensing material. In the presence of native double-stranded calf thymus DNA, malachite green could interact with the DNA, which resulted in a strong fluorescence emission. The fluorescent intensity was linear with malachite green concentration in the range of 4.0 × 10⁻¹⁰ − 1.8 × 10⁻⁷ g ml⁻¹ and the limit of detection was 2.0 × 10⁻¹⁰ g ml⁻¹. Before fluorescence measurement, the only required operation is the mixing of two solutions. So, this method is rather simple and rapid. The method is very safe for the analyst. Furthermore, the mechanism for fluorescence enhancing of native double-stranded calf thymus DNA on MG was proposed based on a series of experiments. The results suggest that the interaction between MG and calf thymus DNA is intercalation in nature.     

Electrochemical stripping voltammetry of gold ions for development of ultra-sensitive immunoassay for chlorsulfuron

The paper reports a highly sensitive enzyme free electrochemical immunoassay (EFEIA) for the detection of herbicide chlorsulfuron. The assay is based upon oxidative gold nanoparticle (GNP) dissolution in an acidic solution. The consequent release of large amounts of gold (Au) metal ions after dissolution of gold nanoparticles tagged to antibody leads to the development of sensitive stripping voltammetry based immunoassay. The detection is made possible by the reduction of Au^3 + ions at the screen printed electrode surface followed by metal analysis by using the square wave voltammetry technique. The sensitivity of chlorsulfuron detection by competitive assay procedure was 6.7 pg mL^− 1 for EFEIA in marked contrast to optical detection using Standard ELISA procedure that gives a sensitivity of 4.97 ng mL^− 1.     

Liquid chromatography on an amide stationary phase with post-column derivatization and fluorimetric detection for the determination of streptomycin and dihydrostreptomycin in foods

The separation of streptomycin and its derivative dihydrostreptomycin using ion-pair liquid chromatography is proposed. The method is based on the use of a new stationary phase based on a ligand with amide groups and the endcapping of trimethylsilyl which avoids the appearance of tailed peaks. The isocratic mobile phase consisted of a 6:94 (v/v) acetonitrile/10 mM pentanesulfonic acid (pH 3.3) mixture at a flow-rate of 1 mL min⁻¹ and fluorescence detection involved a post-column derivatization reaction using β-naphthoquinone-4-sulfonate. Linearity, precision, recovery and sensitivity were satisfactory. The procedure was applied to the analysis of the aminoglycoside antibiotics in different types of foods, as honey, milk, egg and liver. Extraction was carried out by acidic hydrolysis to release protein-bound antibiotics. Detection limits in the food samples are 7.5 and 15 μg kg⁻¹ for streptomycin and dihydrostreptomycin, respectively.     

Facile synthesis of N-acetyl-L-cysteine capped ZnS quantum dots as an eco-friendly fluorescence sensor for Hg2+

This paper described an investigation of a novel eco-friendly fluorescence sensor for Hg²⁺ ions based on N-acetyl-l-cysteine (NAC)-capped ZnS quantum dots (QDs) in aqueous solution. By using safe and low-cost materials, ZnS QDs modified by NAC were easily synthesized in aqueous medium via a one-step method. The quantitative detection of Hg²⁺ ions was developed based on fluorescence quenching of ZnS QDs with high sensitivity and selectivity. Under optimal conditions, its response was linearly proportional to the concentration of Hg²⁺ ions in a range from 0 to 2.4 × 10⁻⁶ mol L⁻¹ with a detection limit of 5.0 × 10⁻⁹ mol L⁻¹. Most of common physiologically relevant cations and anions did not interfere with the detection of Hg²⁺. The proposed method was applied to the trace determination of Hg²⁺ ions in water samples. The possible quenching mechanism was also examined by fluorescence and UV-vis absorption spectra.     

Highly sensitive detection of human thrombin in serum by affinity capillary electrophoresis/laser-induced fluorescence polarization using aptamers as probes

The detection and quantification of disease-related proteins play critical roles in clinical practice and diagnostic assays. We present an affinity probe capillary electrophoresis/laser-induced fluorescence polarization (APCE/LIFP) assay for detection of human thrombin using a specific aptamer as probe. In the APCE/LIFP assay, the mobility and fluorescence polarization of complex are measured simultaneously during CE analysis. The affinity complex of human thrombin can be well separated from unbound aptamer on CE and clearly identified on the basis of its fluorescence polarization and migration. Because of the binding favorable G-quartet conformation potentially involved in the specific aptamer, it was assumed that monovalent and bivalent cations promoting the formation of a stable G quadruplex conformation in the aptamer may enhance the binding of the aptamer and thrombin. Therefore, we investigated the effects of various metal cations on the binding of human thrombin and the aptamer. Our results show that cations like K⁺ and Mg²⁺ could not stabilize the affinity complex. Without the use of typical cations, a highly sensitive assay of human thrombin was developed with the corresponding detection limits of 4.38 × 10⁻¹⁹ and 2.94 × 10⁻¹⁹ mol in mass for standard solution and human serum, respectively.     

Trace mercury (II) detection and separation in serum and water samples using a reusable bifunctional fluorescent sensor

In this work, a reusable bifunctional fluorescent sensor for simultaneous detection and separation of trace Hg²⁺ in water and serum, which contains a naphthalimide derivative of 2,6-bis(aminomethyl)pyridine covalently grafted to the surface of silica particles, was developed. Meanwhile, the fluorescence characteristics and the adsorbent properties of the sensor were investigated in detail. This sensor showed a very good linearity (correlation coefficient of R² = 0.9991) in the range 0.1-1 μM of Hg²⁺ with detection limits lower than 6.8 × 10⁻⁹ M. It can also be used as an adsorbent for the removal of mercuric ions from the contaminated aqueous solution. The regeneration of this sensor is very simple, only by modulating the pH value of the aqueous solution. It can be reused at least four cycles. In addition, the present approach has the advantages of rapidity, simplicity, and low cost. We believe that this approach may serve as a foundation for the preparation of practical fluorescent sensor for the rapid detection of Hg²⁺ in aqueous biological and environmental samples.     

Spectroscopic and HPLC methods for the determination of alendronate in tablets and urine

Two methods (spectrophotometric and HPLC) have been developed and validated for the analysis of alendronate sodium in tablet dosage form. Both methods depend on the ability of alendronate sodium to react with o-phthalaldehyde (OPA) at basic pH to produce a light-absorbing derivative. The derivative was found to possess absorption maximum at 330 nm where neither the derivatizing agent nor the analyte had any absorption. Thus, spectroscopic method was based on the derivatization-induced absorption of alendronate sodium at 333 nm. The HPLC method was based on separation of the formed derivative from other ingredients in tablets with detection at 333 nm. Both methods were satisfactory with regard to accuracy, prescion and linearity. Moreover, a HPLC method with fluorescence detection (HPLC-FD) was developed for the quantification of alendronate sodium in urine. The method was also based on the derivatization of alendronate with OPA, but fluorescence detection was employed. Linearity, recovery, selectivity, prescision and sensitivity were satisfactory for the proposed HPLC-FD method. Yet a new quantification limit (0.6 ng ml⁻¹) for alendronate in urine was achieved.