Planar tetracoordinated silicon in silicon carbonyl complexes: a DFT approach

Recently, some works have focused attention on the reactivity of the silicon atom with closed-shell molecules. With CO, silicon may form a few relatively stable compounds, i.e., Si(CO), Si(CO)(2), and Si[C(2)O(2)], while the existence of polycarbonyl (n > 2) silicon complexes has been rejected by current literature. In this paper, the reaction of silicon with carbonyl has been reinvestigated by density functional calculations. It has been found that the tetracoordinated planar Si(CO)(4) complex is thermodynamically stable. In Si(CO), silicon carbonyl, and Si(CO)(2), silicon dicarbonyl, the CO moieties are datively bonded to Si, and Si[C(2)O(2)], c-silicodiketone, is similar to the compounds formed by silicon and ethylene; Si(CO)(4), silicon tetracarbonyl, may be viewed as a resonance between the extreme configurations (CO)(2)Si + 2CO and 2CO + Si(CO)(2). A detailed orbital analysis has shown that the Si bonding with four CO is consistent with the use of sp(2)d-hybridized orbitals on silicon, giving rise to a planar structure about Si.     

Mechanism of the reaction of CO with NO on palladium catalysts

A mechanism has been proposed for the reaction of CO + NO + (O₂) on palladium catalysts and the elementary stages of the reaction have been subjected to thermodynamic analysis. A kinetic model of the reaction has been constructed. The model of the reaction CO + NO has been analyzed in comparison with the reaction CO + O₂; the existence of a multiplicity of stationary states and critical transitions in the system CO + NO has been demonstrated. Numerical calculation has explained the accelerating influence of oxygen and the inhibiting influence of CO on the rate of the reaction CO + NO, observed experimentally.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 23, No. 4, pp. 484–489, July–August 1987.     

CO adsorption on a Pt(111) surface partially covered with FeO_x nanostructures

The adsorption of CO on Pt group metals, as a most fundamental elementary reaction step, has been widely studied in catalysis and electrocatalysis. Particularly, the structures of CO on Pt(111) have been extensively investigated, owing to its importance to both fundamental and applied catalysis. Yet, much less is known regarding CO adsorption on a Pt(111) surface modulated by supported oxide nanostructures,which is of more relevance to technical catalysis. We thus investigated the coverage-dependent adsorption of CO on a Pt(111) surface partially covered by Fe Oxnanostructures, which has been demonstrated as a remarkable catalyst for low-temperature CO oxidation. We found that, due to its strong chemisorption, the coverage-dependent structure of CO on bare Pt is not influenced by the presence of Fe Ox. But,oxygen-terminated Fe Oxnanostructures could modulate the diffusivity of CO at their vicinity, and thus affect the formation of ordered CO superstructures at low temperatures. Using scanning tunneling microscopy(STM), we inspected the diffusivity of CO, followed the phase transitions of CO domains, and resolved the molecular details of the coverage-dependent CO structures. Our results provide a full picture for CO adsorption on a Pt(111) surface modulated by oxide nanostructures and shed lights on the inter-adsorbate interaction on metal surfaces.     

Infrared spectra of the (AgCO)2 and AgnCO (n=2-4) molecules in rare-gas matrices

Reactions of laser-ablated silver atoms with carbon monoxide molecules in solid argon and neon have been investigated using matrix-isolation IR spectroscopy. Small silver cluster carbonyls, (AgCO)2 and AgnCO (n=2-4), as well as mononuclear silver carbonyls, Ag(CO)2 and Ag(CO)3, are generated upon sample annealing in the argon experiments and are characterized on the basis of the isotopic substitution, the CO concentration change, and the comparison with theoretical predictions. However, these polynuclear carbonyls are absent from the neon experiments. Density functional theory calculations have been performed on these silver carbonyls and the corresponding ligand-free silver clusters, which support the identification of these silver carbonyls from the matrix IRspectrum. A terminal CO has been found in the most stable structures of (AgCO)2, Ag2CO, Ag3CO, and Ag4CO. Furthermore, a plausible reaction mechanism has been proposed to account for the formation of the (AgCO)2 and AgnCO (n=2-4) molecules.     

Comparative vapour phase FTIR spectra and vibrational assignment of manganese pentacarbonyls derivatives of the type XMn(CO)5: (where X=Br, Cl, I, H, D, CH3, CD3, CF3)

The infrared spectra of pure Mn(CO)(5)X in the region 4000-400 cm(-1) has been obtained in the vapour phase. The observed spectrum has been analyzed to distinguish the fundamental frequencies, the rotational-vibrational and structure, and overtone and combination frequencies. The assignment of the observed vapour phase frequencies to the fundamental modes of vibration has been made on C(4V) symmetry. The weak peaks due to XMn(CO)(4)((13)CO) molecules have been measured and assigned for all molecules. This study provides a comprehensive comparison of these compounds, with all of these data the assignment of frequencies is reviewed and a set of quite unambiguous assignments made. The significant finding in this regards are that, it is not necessary to assume lower than C(4V) symmetry for XMn(CO)(5) as has been done in previous consideration of some infrared spectrum of these compounds.     

A novel tricarbonyl rhenium complex of 2-benzoylpyridine - Synthesis, spectroscopic characterization, X-ray structure and DFT calculations

The reaction of Re(CO)₅Cl with 2-benzoylpyridine (bopy) has been examined and a novel Re(CO)₃⁺ tricarbonyl - fac-[Re(CO)₃(bopy)Cl] - has been obtained. The compound has been studied by IR, UV-Vis spectroscopy and X-ray crystallography. The molecular orbital diagram of the tricarbonyl has been calculated with the density functional theory (DFT) method. The spin-allowed singlet-singlet electronic transitions of [Re(CO)₃(bopy)Cl] have been calculated with the time-dependent DFT method, and the UV-Vis spectrum of the title compound has been discussed on this basis.     

超临界二氧化碳二元体系相平衡性质的研究

采用固定体积可视观察法测定了CO₂+甲苯、CO₂+环己烷、CO₂+正丁醛、CO₂+异丁醛、CO₂+甲醇及CO₂+乙醇二元体系的临界点性质,为超临界萃取和化学反应提供基础数据.在对二元体系相行为与单组分超临界相行为进行比较的基础上,对不同化学物质及不同配比的二元体系临界点与二氧化碳临界点之间的关系进行了讨论.     

Preparation and characterization of Cr(CO)(4)dpp (chromium tetracarbonyl 2,3-bis(2'-pyridyl)pyrazine) adsorbed on silver nanoparticles

A transition metal carbonyl species, Cr(CO)(4)dpp, has been successfully attached to bare silver nanoparticles prepared by laser ablation of a metal foil in ethanol. Transmission electron microscopy (TEM) images have shown that at least a portion of the silver nanoparticles have been capped by the chromium species, and ligand shells corresponding to Cr(CO)(4)dpp multilayer adsorption onto the silver nanoparticles of 30-50 nm diameter have been observed. The detection of the strongest Raman-active nu(CO) band of Cr(CO)(4)dpp at 2004 cm(-1) revealed that the species has been adsorbed without decomposition. The time-of-flight secondary ion mass spectrometry (TOF-SIMS) signals recorded of the chromium-capped silver nanoparticles were also consistent with the nondecomposition adsorption process. Density functional calculations have been used to reproduce the Raman spectrum using Ag(7)(+) as a model surface. A large binding energy of about 122 kJ/mol has also been computed between silver and nitrogen atoms thus lending support to Cr(CO)(4)dpp being chemisorbed onto the silver surface.     

The Silicon Carbonyls Revisited: On the Existence of a Planar Si(CO)4

Recently, some works have focused attention on the reactivity of silicon atom with closed-shell molecules. Silicon may form a few relatively stable compounds with CO, i.e. Si(CO), Si(CO)₂, Si[C₂O₂], while the existence of polycarbonyl (n>2) silicon complexes has been rejected by current literature. In this paper, the reaction of silicon with carbonyl has been reinvestigated by density functional calculations. It has been found that the tetracoordinated planar Si(CO)₄ complex is thermodynamically stable. In Si(CO), silicon carbonyl, and Si(CO)₂, silicon dicarbonyl, the CO are datively bonded to Si; Si(CO)₄, silicon tetracarbonyl, may be viewed as a resonance between the extreme configurations (CO)₂Si + 2CO and 2CO + Si(CO)₂; while Si[C₂O₂], c-silicodiketone, is similar to the compounds formed by silicon and ethylene. A detailed orbital analysis has shown that the Si bonding with two CO is consistent with the use of sp ²-hybridized orbitals on silicon, while the Si bonding with four CO is consistent with the use of sp ² d-hybridized orbitals on silicon, giving rise to a planar structure about Si.     

Environment sensitivity of IR-active metal carbonyl probe groups

Solvent-induced frequency shifts of the ν(CO) modes of organometallic complexes of iron and chromium have been measured by FTIR spectroscopy. Bellamy-type plots showed a good correlation between the symmetric and antisymmetric ν(CO) frequencies for different solvents. Shifts in the ν(CO) modes of tricarbonyl(1,3-cyclohexadiene)iron(O) have been used for the quantitative determination of the composition of binary solvent mixtures and the method has been extended to ternary mixtures by the use of principal component analysis of ν(CO) band profiles.     

CO2化学利用的一条新途径

C02开发利用一直是世界各国大型化工企业异常关注的研究课题，但是，由于C02结构稳定，化学活性差，因而决定了该领域的研究课题难度较大，进展比较缓慢．本文报道了一种利用天然气还原C02制备会成气的最新研究结果，该过程不仅可以为破一化学工业提供廉价原料，从而开辟一条极重要的非石油原料的化学工业路线，而且对减缓全球性温室效应也具有一定的社会意义．1实验日分1·1催化剂制备按表1所列组成，以7－AI。0。、硝酸镍、硝酸镁和稀土硝酸盐为原料，采用常规浸渍法参照文献［‘］制备催化剂．1·Zfffe反应评价催化反应评价采用双套管…     

Cobalt N-heterocyclic carbene alkyl and acyl compounds: synthesis, molecular structure and reactivity

The N-heterocyclic-carbene containing cobalt carbonyl compound [Co(IMes)(CO)3(Me)] (IMes = 1,3-bis(2,4,6-trimethylphenyl)-imidazol-2-ylidene), 1, has been synthesised by tertiary phosphine displacement from [Co(PPh3)(CO)3(Me)]. Subsequent carbonylation afforded the acyl derivative [Co(IMes)(CO)3(COMe)], 2. Similarly, the compound [Co(IMes)(CO)3(COEt)], 3, has been synthesised. The compounds 2 and 3 have been shown to react with dihydrogen to form the cobalt hydride compound [Co(IMes)(CO)3(H)], 4. The molecular structures of compounds 1 and 2 have been determined.     

Raman investigation of the CO2 complex formation in CO2-acetone mixtures

Polarized and depolarized Raman spectra of CO2-acetone mixtures have been measured along the isotherm 313 K as a function of CO2 concentration (0.1-0.9 molar fractions in CO2) by varying the pressure from 0.2 up to 8 MPa. Upon CO2 addition, a new band appears at about 655 cm(-1) and is assigned to the lower frequency nu 2(1) component of the bending mode after degeneracy removal due to the formation of a 1:1 electron donor acceptor (EDA) CO2 complex. The equilibrium constant associated with the complex formation was estimated and found close to those of contact charge transfer complexes. The main modifications of the Fermi dyad of CO2 in the mixtures compared with that of pure CO2 at equivalent density have been assessed. The band-shape analysis revealed that each dyad component is described by two Lorentzian profiles, showing that a tagged CO2 molecule probes two kinds of environment in its first shell of neighbors. The first one involves nonspecific interactions of CO2 with surrounding acetone whereas the second is assigned to the signature of 'transient' CO2 complexes formed with acetone. An upper bound life time of the complex has been estimated to be 8 ps. In addition, a broad band has been detected between the Fermi dyad peaks at about 1320 cm(-1) and its origin interpreted as a further evidence of the CO2-acetone heterodimer formation. Finally, the values of the equilibrium concentration of the heterodimer versus the total concentration of CO2 deduced from the analysis of the nu 2(1) band and from the Fermi dyad have been compared, and the difference is interpreted as due to a lack of theoretical approach of Fermi resonance transitions associated with species existing in different environments.     

Light-assisted and remote delivery of carbon monoxide to malignant cells and tissues: Photochemotherapy in the spotlight

The recent discovery of the salutary effects of carbon monoxide (CO) in chronic obstructive pulmonary disease (COPD), ischemic perfusion damage, graft implantation, as well as its pro-apoptotic effects on hyper-proliferating cells has raised interest in delivering small doses of CO to biological targets under controlled conditions. In such attempts, photoactive metal carbonyl complexes (photoCORMs) have shown promise and several accounts of cancer cell eradication with light-triggered CO release from photoCORMs have been reported. CO releasing molecules (CORMs) and photoCORMs have been incorporated within biocompatible drug delivery vehicles such as carboxymethyl chitosan or mesoporous silica-based nanoparticles and the composite materials (photoCORs) have been successfully employed in controlled CO delivery to cancer cells to cause rapid CO-induced apoptosis. Fiber optic technology has also been utilized for remote delivery of CO to not easily accessible targets. Reports on all these therapeutic modalities for on-demand CO delivery to malignant targets in a highly localized fashion have opened up the possibility of phototherapy of cancer with the use of an unusual so-called “toxic” molecule. This review highlights the methodologies used in CO photochemotherapy reported so far along with analysis of their therapeutic outcomes, and possible improvements for better applicability.     

The inter-conversions of platinum carbonyl dianionic clusters, [Pt3(CO)6](n)2- (n = 2-5), in THF and acetonitrile. A combined in situ FTIR spectroscopic and BTEM study leading to the characterization of the new [H(4-x)Pt15(CO)19]x- (x = 2-4) clusters

The inter-conversions of platinum carbonyl dianionic clusters, ([Pt(3)(CO)(6)](n)(2-), n = 2-5), have been studied in THF and acetonitrile using in situ FTIR spectroscopy. These inter-conversions were facilitated by the addition (or removal) of molecular hydrogen. The individual reactions, namely reductions and oxidations of [Pt(3)(CO)(6)](n)(2-) were fast and reversible. BTEM analysis of the data provided the pure component spectra of the individual species without the need for physical separation. It is shown, for the first time, that the species [Pt(3)(CO)(6)](n)(2-) (n = 2) can be formed from the reduction of [Pt(3)(CO)(6)](n)(2-) (n = 3-5) by hydrogen alone in acetonitrile. Also, detection of dissolved CO(2) in solution suggests that a room-temperature water gas shift reaction occurs. This has been shown to arise from nucleophilic attack of water on a coordinated CO of [Pt(3)(CO)(6)](n)(2-) which leads to the formation of [HPt(15)(CO)(19)](3-) and [H(2)Pt(15)(CO)(19)](2-). The parent tetraanion, [Pt(15)(CO)(19)](4-), has been isolated in high yields by reaction of [Pt(3)(CO)(6)](n)(2-) (n = 2, 3) with NaOH at 60 °C and has been structurally characterized by X-ray analysis.     

A quantum chemical calculation on Fe(CO)5 revealing the operation of the Dewar–Chatt–Duncanson model

A nonstandard computational scheme has been applied to calculate Fe(CO)₅ with the aim to illustrate the operation of the Dewar–Chatt–Duncanson model by computation. A full configuration interaction (CI) calculation in an active space has been performed. The active space is built from naturally localized molecular orbitals (NLMOs) localized in bond regions or forming lone pairs. For selecting this active space, Weinhold's perturbation theory formulated in the natural bond orbital (NBO) space has been applied. Bonding, lone pair, and antibond NBOs exhibiting large interaction energies serve to define the active space. The actually applied active space, however, comprises NLMOs that are close in shape to the NBOs indicated by perturbation theory. Thus, a CI calculation with localized orbitals has been performed meeting the classical reasoning of chemists that is often based on local bonding concepts. The computational scheme yields the Lewis structure for Fe(CO)₅ whose energy is identical to the Hartree–Fock energy. The Lewis energy comprises CO → Fe σ‐electron transfer (ET) and CO ← Fe electron back donation (BD). This Lewis energy gets lowered by localized correlation energy contributions caused by ET processes where electrons are back donated from the Fe d‐lone pairs into the CO ligands. Thus, electron correlation within the selected active space is dominated by electron BD. Energies and electron populations of the NBOs support the notion that electrons are preferentially back donated into the equatorial CO ligands. Weights of local Slater determinants, determining the correlation energy, also point to a predominant BD into the equatorial CO ligands. Correlation energy increments resulting from electron BD into single antibond orbitals of the CO ligands have been calculated. These energy quantities also demonstrate that BD into the equatorial CO ligands is more energy lowering than BD into the axial CO ligands. © 2012 Wiley Periodicals, Inc.     

The dramatic effect of NH3 co-ligation on the Fe+-assisted activation of carbon dioxide in the gas phase: from bare metal ions to complexes

The catalytic efficiency of Fe(+) ion over the CO(2) decomposition in the gas phase has been extensively investigated with the help of electronic structure calculation methods. Potential-energy profiles for the activation process Fe(+) + CO(2) --> CO + FeO(+) along two rival potential reaction paths, namely the insertion and addition pathways, originating from the end-on kappa(1)-O and kappa(2)-O,O coordination modes of CO(2) with the metal ion, respectively, have been explored by DFT calculations. For each pathway the potential energy surfaces of the high-spin sextet (S = 5/2) and the intermediate-spin quartet (S = 3/2) spin-states have been explored. The complete energy reaction profile calculated by a combination of ab initio and density functional theory (DFT) computational techniques reveals a two-state reactivity, involving two spin inversions, for the decomposition process and accounts well for the experimentally observed inertness of bare Fe(+) ions towards CO(2) activation. Furthermore, the coordination of up to three extra ancillary NH(3) ligands with the Fe(+) metal ion has been explored and the geometric and energetic reaction profiles of the CO(2) activation processes Fe(+) + n x NH(3) + CO(2) --> [Fe(NH(3))(n)(CO(2))](+) --> [Fe(NH(3))(n)(O)(CO)](+) --> CO + [Fe(O)(NH(3))(n)](+) (n = 1, 2 or 3) have thoroughly been scrutinized for both the insertion and the addition mechanisms. Inter alia, the geometries and energies of the various states of the [Fe(NH(3))(n)(CO(2))](+) and [Fe(NH(3))(n)(O)(CO)](+) complexes are explored and compared. Finally, a detailed analysis of the coordination modes of CO(2) in the cationic [Fe(NH(3))(n)(CO(2))](+) (n = 0, 1, 2 and 3) complexes is presented.     

Reactions of carbon monoxide with free palladium oxide clusters: strongly size dependent competition between adsorption and combustion

The gas phase reactions of carbon monoxide with small mass-selected clusters of palladium, Pd(x)(+) (x = 2-7), and their oxides, Pd(x)O(+) (x = 2-7) and Pd(x)O(2)(+) (x = 4-6), have been investigated in a radio frequency ion trap operated under multi-collision conditions. The bare palladium clusters were found to readily adsorb CO yielding a highly size dependent product pattern. Most interestingly, the reactions of the pre-oxidized palladium clusters with CO lead to very similar product distributions of Pd(x)(CO)(z)(+) complexes as in the case of the corresponding pure Pd(x)(+) clusters. Consequently, it has been concluded that the investigated palladium oxide clusters efficiently oxidize CO under formation of the bare clusters, which further adsorb CO molecules yielding the previously observed Pd(x)(CO)(z)(+) product complex distributions. This CO combustion reaction has been observed even at temperatures as low as 100 K. However, for Pd(2)O(+), Pd(6)O(+), Pd(6)O(2)(+), and Pd(7)O(+) a competing reaction channel yielding palladium oxide carbonyls Pd(x)O(CO)(z)(+) could be detected. The latter adsorption reaction may even hamper the CO combustion under certain reaction conditions and indicates enhanced activation barriers involved in the CO oxidation and/or the CO(2) elimination process on these clusters.     

Infrared spectroscopic and density functional theory studies on the CO dissociation by scandium and yttrium dimers

Reactions of laser-ablated scandium and yttrium atoms with dilute carbon monoxide molecules in solid argon have been investigated using matrix-isolation infrared spectroscopy. On the basis of the results of the isotopic substitution, the change of laser power and CO concentration and the comparison with density functional theory (DFT) calculations, the absorption at 1193.4 cm(-1) is assigned to the C-O stretching vibration of the Sc(2)[eta(2)(mu(2)-C,O)] molecule, which has a single bridging CO that is tilted to the side. This CO-activated molecule undergoes ultraviolet-visible photoinduced rearrangement to the CO-dissociated molecule, c-Sc(2)(mu-C)(mu-O). The cyclic c-Sc(2)(mu-C)(mu-O) molecule has a bridging carbon on one side of the Sc(2) unit and a bridging oxygen on the other. The analogous Y(2)[eta(2)(mu(2)-C,O)] molecule has not been observed, but the CO-dissociated c-Y(2)(mu-C)(muO) molecule has been observed in the Y + CO experiments. DFT calculations of the geometry structures, vibrational frequencies, and IR intensities strongly support the assignments. The CO activation mechanism has also been discussed. Our experimental and theoretical results schematically depict an activation process to CO dissociation.     

Purity testing of organometallic catalysts by packed capillary supercritical fluid chromatography

A packed capillary column supercritical fluid chromatography system with flame ionization detection has been used for purity testing of candidates for homogeneous catalysis such as methyl tricarbonyl pentamethylcyclopentadienyl tungsten [Cp*W(CO)3Me], methyl tricarbonyl cyclopentadienyl tungsten [CpW(CO)3Me], tetramethyl pentamethylcyclopentadienyl iridium (Cp*IrMe4), trimethyl (1,4,7-trimethyl-1,4,7-triazocyclononane) rhodium (CnRhMe3), trimethylphosphine hydride dicarbonyl cyclopentadienyl molybdenum [eta5-CpMoH(CO)2PMe3] and triphenylphosphine hydride dicarbonyl cyclopentadienyl molybdenum [eta5-CpMoH(CO)2PPh3]. A mass limit of detection of 240 pg was found for eta5-CpMoH(CO)2PMe3 when using a 60-nl injection volume and pure CO2 as mobile phase on a 5 microm Kromasil C18 column. The stability of the catalysts in solution has been examined. After 24 h more than 70% of eta5-CpMoH(CO)2PMe3 and 50% of eta5-CpMoH(CO)2PPh3 had decomposed. Due to the instability of the compounds the purity testing had to take place rapidly after sample dissolution.