A Fast Finite Element Analysis of Millimeter Wave Waveguide Filters

The multifrontal method is applied for solving a large system of linear equations resulting from the use of edge-based finite element method (FEM). The finite element method combined with the perfectly matched layers (PML) is given for simulation of microwave filters and the algorithm of multifrontal method is described in detail. The reflection and insertion losses of millimeter wave filter are analyzed as the examples and the obtained results are compared with those obtained from literature. In order to demonstrate the efficiency of the multifrontal method, the computational time is compared with that of both symmetric successive overrelaxation (SSOR) preconditioned conjugate gradient (PCG) and conjugate gradient methods (CG) for the thick-iris waveguide bandpass filer.     

Efficient Analysis of Millimeter Wave Ferrite Circulators by the GMRES Iterative Algorithm

The finite element method (FEM) combined with the perfectly matched layers (PML) is given for simulation of waveguide ferrite circulators. The generalized minimal residual (GMRES) iterative method is applied to solve such sparse large non-symmetric system of linear equations resulting from the use of edge-based finite element method. The formulation of FEM and the algorithm of GMRES method are described in detail. The reflection and insertion losses of millimeter wave waveguide circulator are analyzed and the results are compared with those obtained from literature.     

Free Mesh Method: fundamental conception, algorithms and accuracy study

The finite element method (FEM) has been commonly employed in a variety of fields as a computer simulation method to solve such problems as solid, fluid, electro-magnetic phenomena and so on. However, creation of a quality mesh for the problem domain is a prerequisite when using FEM, which becomes a major part of the cost of a simulation. It is natural that the concept of meshless method has evolved. The free mesh method (FMM) is among the typical meshless methods intended for particle-like finite element analysis of problems that are difficult to handle using global mesh generation, especially on parallel processors. FMM is an efficient node-based finite element method that employs a local mesh generation technique and a node-by-node algorithm for the finite element calculations. In this paper, FMM and its variation are reviewed focusing on their fundamental conception, algorithms and accuracy.     

The discontinuous Petrov-Galerkin method for one-dimensional compressible Euler equations in the Lagrangian coordinate

In this paper, a Petrov-Galerkin scheme named the Runge-Kutta control volume (RKCV) discontinuous finite element method is constructed to solve the one-dimensional compressible Euler equations in the Lagrangian coordinate. Its advantages include preservation of the local conservation and a high resolution. Compared with the Runge-Kutta discontinuous Galerkin (RKDG) method, the RKCV method is easier to implement. Moreover, the advantages of the RKCV and the Lagrangian methods are combined in the new method. Several numerical examples are given to illustrate the accuracy and the reliability of the algorithm.     

用有效折射率法和有限元法分析多量子阱条形光波导

本文提出了一种快速和精确分析多量子阱(MQW)条形光波导的新算法。它基于有效折射率法和有限元法的结合。首先,由等效的平面波导替换多量子阱条形结构,用有效折射率法从原来问题得到平面波导的折射率分布;然后,用有限元法计算等效结构中E_(mn)~x模和E_(mn)~y模的传播常数和场强分布。文中给出了任意阱数和不同宽度多量子阱的对称结构和不对称结构的结果。     

冲击动力学中离散元与有限元相结合的计算方法研究

 阐述了一种离散元与有限元法相结合的计算方法,编制了可应用于细观模拟的二维程序,对受冲击载荷作用的均匀材料和非均匀材料的响应特征进行了计算,并对数值模拟进行了验证。计算结果与理论值较吻合,验证了方法的可行性。     

一类各项异性半线性椭圆方程自然边界元与有限元耦合法

将冯康和余德浩提出的自然边界归化方法用于研究一类半线性椭圆方程外区域问题，提出一种自然边界元与有限元的耦合算法、针对某一类半线性椭圆方程，应用变分原理，研究其弱解性及Galerkin逼近，得到有限元解的误差估计及收敛阶O(h^n)，最后给出相应数值例子。     

Computational performance of Free Mesh Method applied to continuum mechanics problems

The free mesh method (FMM) is a kind of the meshless methods intended for particle-like finite element analysis of problems that are difficult to handle using global mesh generation, or a node-based finite element method that employs a local mesh generation technique and a node-by-node algorithm. The aim of the present paper is to review some unique numerical solutions of fluid and solid mechanics by employing FMM as well as the Enriched Free Mesh Method (EFMM), which is a new version of FMM, including compressible flow and sounding mechanism in air-reed instruments as applications to fluid mechanics, and automatic remeshing for slow crack growth, dynamic behavior of solid as well as large-scale Eigen-frequency of engine block as applications to solid mechanics.     

介质光波导的数值计算及近似方法

综述介质光波导中模式分析方法的最新进展。着重分析严格的数值分析方法及近似方法最近的研究进展。依据方法的计算精确度、计算效率和计算复杂度等因素．对有限元法和有限差分法这两种数值分析方法以及有效指数法和频谱指数法等近似方法进行讨论。论述磁光波导的分析方法。     

超声波检测计算机模拟和仿真的研究及应用现状

随着高性能计算机的广泛应用，超声检测模拟和仿真的研究方兴未艾。本文对这些研究所选择的数学模型和方法进行了综合评述，探讨了Gaussiam模型、声线模型、衍射理论、有限积分技术等的应用，涉及的方法包括各种解析方法及有限差分、有限元、边界元等数值方法。     

基于局部基本解法的静电场仿真分析

将局部基本解方法应用于静电场问题的模拟与分析。局部基本解方法是利用控制方程的基本解,基于局部理论和移动最小二乘原理提出的一种无网格算法。相比于有限元和有限差分等传统网格类方法,该方法仅需离散节点,避免了复杂的网格剖分难题。作为一种半解析数值技术,物理问题的基本解被作为插值基函数建立数值离散模型,从而保证了算法的较高精度。此外,与具有全局离散格式的无网格方法相比,局部基本解法更适用于高维复杂几何和大尺度模拟。二维和三维数值试验表明,该方法具有实施方便灵活,计算精度高和计算速度快等优势。为静电场仿真研究开辟新的途径,拓展了局部基本解方法的应用领域。     

Combining the complex variable reproducing kernel particle method and the finite element method for solving transient heat conduction problems

In this paper, the complex variable reproducing kernel particle (CVRKP) method and the finite element (FE) method are combined as the CVRKP-FE method to solve transient heat conduction problems. The CVRKP-FE method not only conveniently imposes the essential boundary conditions, but also exploits the advantages of the individual methods while avoiding their disadvantages, then the computational efficiency is higher. A hybrid approximation function is applied to combine the CVRKP method with the FE method, and the traditional difference method for two-point boundary value problems is selected as the time discretization scheme. The corresponding formulations of the CVRKP-FE method are presented in detail. Several selected numerical examples of the transient heat conduction problems are presented to illustrate the performance of the CVRKP-FE method.     

Finite element method for the two-dimensional atmospheric radiative transfer

The finite element method is applied to the solution of the two-dimensional atmospheric radiative transfer. The analysis is mainly focussed on the derivation of the cell or element equation. The Galerkin method and several hybrid methods using the integral and finite difference form of the radiative transfer equation are employed to obtain the cell equation. The assembled system of equations relating the radiances at the lower and upper boundary of the domain is solved by a direct method.     

多尺度模拟中网格守恒重映算法

针对耦合微观分子动力学(MD)和宏观有限元方法(FE)的多尺度模拟,提出一类新的基于贡献单元法的网格守恒重映算法.由于物理量是由有限元节点以及相应区域的原子信息通过积分重构得到的,对结构和非结构网格都能适用.对于未知量定义在顶点的情形,引入辅助网格.数值例子验证了算法的准确性和有效性.     

有限周期电磁结构的区域分解快速算法

针对有限周期电磁结构,提出一种高效率的有限元分裂与互连算法.把原求解区域划分成若干个子区域,显著地降低了问题的复杂度.根据广义变分原理,采用拉格朗日乘子在子区域之间交换信息,并建立其相应的粗问题.研究子区域系数矩阵的可逆性.通过引入基本子区域,实现可扩展并行计算,且尤其适合于分析光子晶体等有限周期结构.     

激光辐照受拉铝板破坏行为的时空多尺度数值模拟

推导耦合过渡区内参变量信息交换的元/网格动量传递多尺度算法,建立离散元与有限元耦合时空多尺度计算模型,并应用于激光辐照下受拉铝板破坏行为的数值模拟中.通过对比有限元计算模型、空间多尺度计算模型与时空多尺度计算模型在激光辐照下受拉铝板破坏算例的模拟结果,验证离散元与有限元耦合时空多尺度计算模型的准确性和数值计算高效率优势.使用该多尺度计算模型从宏观和细观尺度对铝板破坏行为进行数值模拟,模拟结果与实验结果基本一致.     

Application of Robust Incomplete Cholesky Factorizations Preconditioned CG Algorithms for FEM Analysis of Millimeter Wave Filters

The Incomplete Cholesky factorizations preconditioning scheme is applied to the conjugate gradient (CG) method for solving a large system of linear equations resulting from finite element method (FEM) analysis of millimeter wave filters. As is well known, the convergence of CG method deteriorates with increasing EM wave number and in millimeter wave band the eigen-values of A are more and more scattered between both the right and the left half-plane. The efficient implementation of this preconditioned CG (PCG) algorithm is described in details for Complex coefficient matrix. With incomplete factorization preconditioning scheme in the conjugate gradient algorithm, this PCG approach can reach convergence in 20 times CPU time shorter than CG for several typical millimeter wave structures.     

求解辐射传递的非结构混合有限体积／有限元法

本文给了一种适用于任意非结构网格的有限体积/有限元法的混合算法用于求解多维半透明吸收、发射、散射性灰矩形介质内的辐射传递.该方法使用有限元法进行角度离散,有限体积法进行空间离散.与基于辐射传递离散坐标方程的方法不同的是,该方法在迭代求解的过程中,针对每一个空间体元,所有角度方向的辐射强度同时耦合求出.通过两个算例验证了该解法的正确性.     

光滑粒子流体动力学有限元法接触算法研究

 耦合光滑粒子流体动力学（SPH）方法和有限元法（FEM）,是研究冲击动力学问题的一种有效途径。为解决SPH粒子和有限单元间的接触问题,提出了SPH-FEM接触算法。该算法是在有限元节点处设置背景粒子,采用SPH接触算法的思想,计算施加在SPH粒子和有限元节点上的接触力,并且以外力的形式分别加入到SPH动量方程和有限元动力学方程中。利用SPH-FEM接触算法,对两杆撞击以及圆柱形钢弹正冲击钢板发生的冲塞破坏过程进行了三维数值模拟,靶板采用含损伤的Johnson-Cook模型和Grüneisen状态方程,模拟结果与实验结果吻合较好。     

A New Finite Volume Element Formulation for the Non-Stationary Navier-Stokes Equations

A semi-discrete scheme about time for the non-stationary Navier-Stokes equations is presented firstly, then a new fully discrete finite volume element (FVE) formulation based on macroelement is directly established from the semi-discrete scheme about time. And the error estimates for the fully discrete FVE solutions are derived by means of the technique of the standard finite element method. It is shown by numerical experiments that the numerical results are consistent with theoretical conclusions. Moreover, it is shown that the FVE method is feasible and efficient for finding the numerical solutions of the non-stationary Navier-Stokes equations and it is one of the most effective numerical methods among the FVE formulation, the finite element formulation, and the finite difference scheme.