Measurement and calculation of the fine structure changing collision cross sections in the Mg+ and Ca+ resonance states by helium

Using laser ablation of solid samples in a buffer gas atmosphere, free magnesium and calcium ions are produced within a confined volume of a laser produced plasma above the sample surface. The fine structure transfer cross sections of the Mg⁺ and Ca⁺ resonance states by collisions with helium are measured at different gas temperatures by laser induced fluorescence. The experimental results are compared with theoretical cross sections of fine structure changing collisions taking into account radial and angular mixing of the relevant molecular terms. Good agreement between theory and experiment is obtained in the case of Mg⁺-He. For Ca⁺-He, the theoretical and experimental data do not agree. Possible systematic errors in the fine structure transfer measurements of Ca⁺ by helium are discussed.     

Fast Imaging of Laser-induced Plasma Emission from a ZnO Target

The spatio-temporal evolution of plasma plume laser ablation zinc oxide target was investigated by ICCD camera fast imaging. The plasma was created by a KrF excimer laser of 248 nm wavelength and 25 ns pulse. The laser fluence was set at 2 J/cm². This study was performed under vacuum and oxygen atmosphere at a pressure range of 10^− 6 to 10 mbar.Free expansion, splitting and stopping of the plume were observed at different pressures and time delays following the laser pulse. Moreover, depending on the gas pressures, the photography shows some turbulence for given time delays in the front edge of the plasma while at 5 and 10 mbar the whole plasma edge is perturbed. Rayleigh–Taylor instability is proposed as an explanation to this observed effect. A time integrated emission spectroscopy diagnostic has been also used to identify plasma species. A plasma emission spectrum shows the presence of Zn⁺, Zn and O emission lines both in vacuum and in O₂ atmosphere. As the distance from the target surface increases the Zn⁺ emission line disappears.     

Temporal evolution study of the plasma induced by CO2 pulsed laser on targets of titanium oxides

This paper reports studies on time-resolved laser induced breakdown spectroscopy (LIBS) of plasmas induced by IR nanosecond laser pulses on the titanium oxides TiO and TiO₂ (anatase). LIBS excitation was performed using a CO₂ laser. The laser-induced plasma was found strongly ionized yielding Ti⁺, O⁺, Ti^2 +, O^2 +, Ti^3 +, and Ti^4 + species and rich in neutral titanium and oxygen atoms. The temporal behavior of specific emission lines of Ti, Ti⁺, Ti^2 + and Ti^3 + was characterized. The results show a faster decay of Ti^3 + and Ti^2 + ionic species than that of Ti⁺ and neutral Ti atoms. Spectroscopic diagnostics were used to determine the time-resolved electron density and excitation temperatures. Laser irradiation of TiO₂-anatase induces on the surface sample the polymorphic transformation to TiO₂-rutile. The dependence on fluence and number of irradiation pulses of this transformation was studied by micro-Raman spectroscopy.     

Thiol-functionalized silica–mixed matrix membranes for silver capture from aqueous solutions: Experimental results and modeling

The study deals with an aqueous phase application of mixed matrix membranes (MMMs) for silver ion (Ag⁺) capture. Silica particles were functionalized with 3-mercaptopropyltrimethoxy silane (MPTMS) to introduce free thiol (–SH) groups on the surface. The particles were used as the dispersed phase in the polysulfone or cellulose acetate polymer matrix. The membranes were prepared by the phase inversion method to create more open and interconnected porous structures suitable for liquid phase applications. The effects of the silica properties such as particle size, specific surface area, and porous/nonporous morphology on the silver ion capture capacity were studied. It was demonstrated that the membranes are capable of selectively capturing silver from a solution containing significant concentrations of other metal ions like Ca²⁺. The membranes were studied to quantify the dynamic capacity for silver ion capture and its dependence on residence time through the adjustment of transmembrane pressure. The thiol–Ag⁺ interaction was quantified with quartz crystal microbalance in a continuous flow mode experiment and the observations were compared with the membrane results. One-dimensional unsteady state model with overall volumetric mass transfer coefficient was developed and solved to predict the silver concentration in the liquid phase and the solid silica phase along the membrane thickness at varying time. The breakthrough data predicted using the model is comparable with the experimental observations. The study demonstrates successful application of the functionalized silica–mixed matrix membranes for selective aqueous phase Ag⁺ capture with high capacity at low transmembrane pressures. The technique can be easily extended to other applications by altering the functionalized groups on the silica particles.     

Time-resolved optical emission spectroscopic measurements of He plasma induced by a high-power CO2 pulsed laser

Laser-induced breakdown spectroscopy of helium plasma, initially at room temperature and pressures ranging from 12 to 101 kPa was investigated using a transverse excitation atmospheric CO₂ pulsed laser (λ = 9.621 and 10.591 μm, a full width at half maximum of 64 ns, and an intensity from 1.5 to 5.36 GW cm⁻²). The helium breakdown spectrum is mainly due to electronic relaxation of excited He, He⁺ and H. Plasma characteristics were examined in detail on the emission lines of He and He⁺ by the time-integrated and time-resolved optical emission spectroscopy technique. Optical breakdown threshold intensities, ionization degree and plasma temperatures were obtained. An auxiliary metal mesh target was used to analyze the temporal evolution of the species in the plasma. The results show a faster decay of the continuum emission and He⁺ species than in the case of neutral He atoms. The velocity and kinetic energy distributions for He and He⁺ species were obtained from time-of-flight measurements. Electron density in the laser-induced plasma was estimated from the analysis of spectral data at various times from the laser pulse incidence. Temporal evolution of electron density has been used for the estimation of the three-body electron-ion recombination rate constant.     

Laser induced breakdown spectroscopy (LIBS) as an analytical tool for the detection of metal ions in aqueous solutions

Laser induced breakdown spectroscopy (LIBS) is applied to analyze aqueous solutions of Li⁺, Na⁺, Ca²⁺, Ba²⁺, Pb²⁺, Cd²⁺, Hg²⁺ and Er³⁺ and suspensions of ErBa₂Cu₃O_x particles (d=0.2 m). An excimer (308 nm) pumped dye laser with laser pulse at 500 nm and pulse energy at 22±2 mJ is used to produce plasma in aqueous solution. Plasma emission lines of the elements are detected by a photodiode array detector. Detection limits of the metal ions are 500 mg/l for Cd²⁺, 12.5 mg/l for Pb²⁺, 6.8 mg/l for Ba²⁺, 0.13 mg/l for Ca²⁺, 13 g/l for Li⁺ and 7.5 g/l for Na⁺. No mercury and erbium emission can be detected, even at Hg²⁺ and Er³⁺ concentrations of up to the g/l range. On the other side, for Er in suspensions of ErBa₂Cu₃O_x particles a more than 10³ times higher sensitivity is found than for dissolved Er³⁺. This result gives a possibility to analyze colloid-borne metal ions with an increased sensitivity.     

Resonantly laser induced plasmas in gases: The role of energy pooling and exothermic collisions in plasma breakdown and heating

The present work is a systematic experimental study of the plasma formation in cesium vapor induced by a continuous laser tuned to the resonance transition 6S_1/2–6P_3/2. Taking into account the measured absolute population densities of Cs ground and excited state atoms as well as the electron densities derived from Stark broadening of the Cs lines, complete local thermodynamic equilibrium in the laser-produced plasma was found for laser power densities ≈ 10 Wcm^− 2 at cesium ground state number densities of about 10¹⁷ cm^− 3. Direct conversion of the excitation energy or parts of the excitation energy in exothermic collisions of laser-excited atoms is concluded to be the major process for atomic vapor heating and subsequent formation of LTE plasmas.     

Physical and analytical characteristics of an atmospheric pressure argon–helium radiofrequency capacitively coupled plasma

A very low power radiofrequency capacitively coupled plasma (13.56 MHz, 5–70 W), was generated in our laboratory on a sharp Kanthal tip without any counter electrode, as an intrinsic part of RLC series resonant circuit. Physical characteristics of this plasma obtained in Ar–He mixture, were studied as function of observation height or gas mixture composition. The excitation temperature of Ar (1500–2100 K), He (3000–3500 K) and H (2500–3200 K), the rotational temperature of the OH band (1300–2900 K), the electron temperature (5500–6500 K) and the electron number density (8 · 10¹³–2 · 10¹⁴ cm^− 3) were determined. The evolution of several atomic emission lines or molecular bands was studied in order to investigate the fundamental processes that take place in such plasma. From the point of view of analytical applications it was found that the optimum conditions of excitation (most intense emission lines and lowest detection limits) are met for a 42% He in the gas mixture and an observation height of 1 mm above the electrode. The optimum atomic emission analysis parameters were established for 7 elements (Na, Li, Ca, K, Cd, Zn and Hg) using pneumatically nebulized liquid solutions. It was found that the presence of He in the plasmogenic gas has an enhancing effect on the emission intensities and detection limits.     

Synthesis of new benzimidazolium salts with tunable emission intensities and their application as fluorescent probes for Fe in pure aqueous media

A series of novel, water-soluble benzimidazolium salts with common ‘fluorophore–spacer–receptor’ PET design has been synthesized. Despite the common PET scaffold these benzimidazolium salts displayed diverse emission intensities in pure aqueous solutions. The observed emission intensities were found to be influenced by the functionalized alkyl side arms present on the benzimidazolium ring. These benzimidazolium salts were also found to act as selective sensors for Fe³⁺ ions over other metal ions like Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Al³⁺, Cr³⁺, Co²⁺, Ni²⁺, Mn²⁺, Zn²⁺, Pb²⁺, Ag⁺, Cu²⁺ and Hg²⁺ in pure aqueous media.     

Ion-exchange kinetics in natural heulandite and clinoptilolite

The kinetics of sorption of Ca²⁺ ions from aqueous solution by K⁺-substituted forms of heulandite and clinoptilolite have been studied at 298 K. The K⁺-Ca²⁺ ion exchange in heulandite and clinoptilolite is described by an internal diffusion mechanism. Self-diffusion coefficients were determined for Ca²⁺ ions in these zeolites.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, pp. 2215–2217, October, 1991.     

Resonance raman spectra and quantum yields of MoS42−

Resonance Raman scattering of MoS₄^2? was studied in aqueous solution by irradiating its strong 4700 Å absorption band with five different lines of an Ar⁺ laser. The vibrational structure of the resonance spectra is discussed. Cross sections and quantum yields for the total scattered radiation were determined using NO₃^? as an internal standard.     

Compact plasma source for removal of hydrocarbons for surface analysis

A low–energy, constricted‐anode Anders‐type plasma source was built and tested for the chemical removal of adventitious carbon on surfaces. Oxygen plasma, generated in the source, extends to the sample surface through an aperture in the anode. This plasma reacts with surface hydrocarbons and removes them in less than a minute without influencing the intrinsic surface stoichiometry of nonoxidizing samples such as minerals, glasses, and metal oxides. Adventitious carbon removal is critical for accurate binding energy determination and quantitative measurements in XPS and AES, particularly in multicomponent materials. We measure the plasma to be composed primarily of O⁺ and O₂⁺, with minor H⁺, H₂⁺, and O⁺⁺ components. Ion energy distributions were measured for O⁺ and O⁺⁺ and show all emitted ions have energies less than 50 eV, confirming chemical desorption as the primary removal mechanism. The plasma source, easily built ‘in house’, is compact and can be mounted on a 2.75‐in flange for in situ specimen cleaning prior to surface analysis. Copyright © 2009 John Wiley & Sons, Ltd.     

Supramolecular solvent-based hollow fiber liquid phase microextraction of benzodiazepines

A new, efficient, and environmental friendly hollow fiber liquid phase microextraction (HF-LPME) method based on supramolecular solvents was developed for extraction of five benzodiazepine drugs. The supramolecular solvent was produced from coacervation of decanoic acid aqueous vesicles in the presence of tetrabutylammonium (Bu₄N⁺). In this work, benzodiazepines were extracted from aqueous samples into a supramolecular solvent impregnated in the wall pores and also filled inside the porous polypropylene hollow fiber membrane. The driving forces for the extraction were hydrophobic, hydrogen bonding, and π-cation interactions between the analytes and the vesicular aggregates. High-performance liquid chromatography with photodiode array detection (HPLC-DAD) was applied for separation and determination of the drugs. Several parameters affecting the extraction efficiency including pH, hollow fiber length, ionic strength, stirring rate, and extraction time were investigated and optimized. Under the optimal conditions, the preconcentration factors were obtained in the range of 112–198. Linearity of the method was determined to be in the range of 1.0–200.0 μg L⁻¹ for diazepam and 2.0–200.0 μg L⁻¹ for other analytes with coefficient of determination (R²) ranging from 0.9954 to 0.9993. The limits of detection for the target benzodiazepines were in the range of 0.5–0.7 μg L⁻¹. The method was successfully applied for extraction and determination of the drugs in water, fruit juice, plasma and urine samples and relative recoveries of the compounds studied were in the range of 90.0–98.8%.     

The double K+/Ca2+ sensor based on laser scanned silicon transducer (LSST) for multi-component analysis

In the present work a double ion sensor based on a laser scanned semiconductor transducer (LSST) for the simultaneous determination of K⁺- and Ca²⁺-ions in solutions has been developed. Specially elaborated ion-sensitive membrane compositions based on valinomycin and calcium ionophore calcium bis[4-(1,1,3,3-tetramethylbutyl)phenyl] phosphate (t-HDOPP-Ca) were deposited as separate layers on a silanized surface of the Si/SiO₂/Si₃N₄-transducer. The proposed multi-sensor exhibits theoretical sensitivities and the detection limits of the sensor were found to be 2×10⁻⁶ mol l⁻¹ for K⁺ and 5×10⁻⁶ mol l⁻¹ for Ca²⁺. The elaborated double sensor is proposed for the first time as a prototype of a new type of multi-sensor systems for chemical analysis.     

Measurement and modelling of solubility for calcium sulfate dihydrate and calcium hydroxide in NaOH/KOH solutions

The solubility of calcium sulfate dihydrate (CaSO₄·2H₂O) and calcium hydroxide (Ca(OH)₂) in alkali solutions is essential to understand their desilication behavior from Bayer liquor. In this work, solubilities of calcium sulfate dihydrate and calcium hydroxide for the ternary systems of CaSO₄·2H₂O–NaOH–H₂O, CaSO₄·2H₂O–KOH–H₂O, and Ca(OH)₂–NaOH–H₂O were measured by using the classic isothermal dissolution method over the temperature range of 25–75 °C. The Pitzer model embedded in Aspen Plus platform was used to model the experimental solubility data for these systems. The experimental solubility data was employed to obtain the new binary interaction parameters for Ca(OH)⁺–OH⁻, Ca(OH)⁺–Ca²⁺ and Ca(OH)⁺–K⁺, suggesting that the species Ca(OH)⁺ is a dominant species in simulated solubility for alkali systems. Validation of the parameters was performed by predicting the solubility for the ternary systems of Ca(OH)₂–NaOH–H₂O, CaSO₄·2H₂O–NaOH–H₂O and CaSO₄·2H₂O–KOH–H₂O with the overall average relatively deviation (ARD) of 2.12%, 0.75% and 1.63%, respectively.     

Trapped interfacial redox introduces reversibility in the oxygen reduction reaction in a non-aqueous Ca2+ electrolyte

Electrochemical investigations of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) have been conducted in a Ca²⁺-containing dimethyl sulfoxide electrolyte. While the ORR appears irreversible, the introduction of a tetrabutylammonium perchlorate (TBAClO₄) co-salt in excess concentrations results in the gradual appearance of a quasi-reversible OER process. Combining the results of systematic cyclic voltammetry investigations, the degree of reversibility depends on the ion pair competition between Ca²⁺ and TBA⁺ cations to interact with generated superoxide (O₂⁻). When TBA⁺ is in larger concentrations, and large reductive overpotentials are applied, a quasi-reversible OER peak emerges with repeated cycling (characteristic of formulations without Ca²⁺ cations). In situ Raman microscopy and rotating ring-disc electrode (RRDE) experiments revealed more about the nature of species formed at the electrode surface and indicated the progressive evolution of a charge storage mechanism based upon trapped interfacial redox. The first electrochemical step involves generation of O₂⁻, followed primarily by partial passivation of the surface by Ca_xO_y product formation (the dominant initial reaction). Once this product matrix develops, the subsequent formation of TBA⁺--O₂⁻ is contained within the Ca_xO_y product interlayer at the electrode surface and, consequently, undergoes a facile oxidation reaction to regenerate O₂.

An interlayer product of oxygen reduction with Ca²⁺/TBA⁺ yields a quasi-reversible oxygen evolution reaction by inducing a trapped interfacial redox process.     

Thermodynamic modeling for the removal of Cs+, Sr2+, Ca2+and Mg2+ions from aqueous waste solutions using zeolite A</p> </p>

Summary The batch removal ofCs⁺, Sr²⁺, Ca²⁺and Mg²⁺ions from aqueous solutions using synthetic zeolite A was investigated. The influence of the initial ion concentration, pH and temperature was studied. The obtained isotherm data have been correlated with Langumir, Freundlich, and Dubinin-Radushkevich(D-R) isotherm models. The effect of the temperature on the equilibrium distribution values has been utilized to evaluate the standard thermodynamic parameters such as free energy (DG), enthalpy (DH) and entropy (DS). Based on the D-R isotherm expression, the maximum ion-exchange capacity and the mean free energy of each studied ion has been determined. The selectivity sequence, deduced from the equilibrium isotherm data is: Sr²⁺>Ca²⁺>Mg²⁺>Cs⁺>Na⁺.</p> </p>     

Ultra-sensitive determination of cyanide in surface water by gas chromatography–tandem mass spectrometry after derivatization with 2-(dimethylamino)ethanethiol

A gas chromatography–tandem mass spectrometric (GC–MS/MS) method has been established for the determination of cyanide in surface water. This method is based on the derivatization of cyanide with 2-(dimethylamino)ethanethiol in surface water. The following optimum reaction conditions were established: reagent dosage, 0.7 g L⁻¹ of 2-(dimethylamino)ethanethiol; pH 6; reaction carried out for 20 min at 60 °C. The organic derivative was extracted with 3 mL of ethyl acetate, and then measured by using GC–MS/MS. Under the established conditions, the detection and quantification limits were 0.02 μg L⁻¹ and 0.07 μg L⁻¹ in 10-mL of surface water, respectively. The calibration curve had a linear relationship relationship with y = 0.7140x + 0.1997 and r² = 0.9963 (for a working range of 0.07–10 μg L⁻¹) and the accuracy was in a range of 98–102%; the precision of the assay was less than 7% in surface water. The common ions Cl⁻, F⁻, Br⁻, NO₃⁻, SO₄²⁻, PO₄³⁻, K⁺, Na⁺, NH₄⁺, Ca²⁺, Mg²⁺, Ba²⁺, Mn⁴⁺, Mn²⁺, Fe³⁺, Fe²⁺ and sea water did not interfere in cyanide detection, even when present in 1000-fold excess over the species. Cyanide was detected in a concentration range of 0.07–0.11 μg L⁻¹ in 6 of 10 surface water samples.     

Intensity enhancement in cross-beam pulsed laser ablation using two orthogonal targets

In this work we investigated a novel configuration of the orthogonal geometry for double pulse laser ablation. In this arrangement, a laser is focused onto a target generating a highly directed plume; after that, an additional laser produces a second plasma onto another perpendicular target. In this way, the second plume is expanded through the first plume region. Ablation of carbon was carried out in vacuum (10^− 4 Pa) by two delayed lasers. The first pulse corresponds to a Nd:yttrium–aluminum–garnet (YAG) (1064 nm) and the second one to an excimer (248 nm) laser. Results show that plasma interactions produce different species emission enhancement depending on the delay between lasers, laser fluences and the spatial overlapping between plumes. Approximately an 100-fold increase in emission signal was measured as the observation distance grows.     

Comparative imaging of P,S, Fe,Cu, Zn and C in thin sections of rat brain tumor as well as control tissues by laser ablation inductively coupled plasma mass spectrometry

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was used for quantitative imaging of selected elements (P, S, Fe, Cu, Zn and C) in thin sections of rat brain samples (thickness 20 μm). The sample surface was scanned (raster area ~ 2 cm²) with a focused laser beam (wavelength 266 nm, diameter of laser crater 50 μm, and irradiance 1 × 10⁹ W cm^− 2). The laser ablation system was coupled to a double-focusing sector field. The possibility was evaluated of using carbon (via measurement of ¹³C⁺) as an internal standard element for imaging element distribution as part of this method. The LA-ICP-MS images obtained for P, S, Fe Cu and Zn were quantified using synthetically prepared matrix-matched laboratory standards. Depending on the sample analyzed, concentrations of Cu and Zn in the control tissue were found to be in the range of 8–10 μg g^− 1 and 10–12 μg g^− 1, while in the tumor tissue these concentrations were in the range of 12–15 μg g^− 1 and 15–17 μg g^− 1, respectively. The measurements of P, S and Fe distribution revealed the depletion of these elements in tumor tissue. In all the samples, the shape of the tumor could be clearly distinguished from the surrounding healthy tissue by the depletion in carbon. Additional experiments were performed in order to study the influence of the water content of the analyzed tissue on the intensity signal of the analyte. The results of these measurements show the linear correlation (R² = 0.9604) between the intensity of analyte and amount of water in the sample. The growth of a brain tumor was thus studied for the first time by imaging mass spectrometry.