Ultrasound-promoted synthesis of 2-amino-6-(arylthio)-4-arylpyridine-3,5-dicarbonitriles using ZrOCl2·8H2O/NaNH2 as the catalyst in the ionic liquid [bmim]BF4 at room temperature

We herein present an efficient and environmentally benign protocol for the synthesis of 2-amino-6-(arylthio)-4-arylpyridine-3,5-dicarbonitrile derivatives via the three-component condensation of a variety of aldehydes, arylthiols, and malononitrile catalyzed by ZrOCl₂·8H₂O/NaNH₂ (20 mol %) in the ionic liquid [bmim]BF₄ under ultrasound irradiation at room temperature.     

BF3·SiO2: an efficient alternative for the synthesis of 14-aryl or alkyl-14H-dibenzo[a,j]xanthenes

Silica-supported boron trifluoride (BF₃·SiO₂) is an efficient, readily available, and reusable catalyst for the synthesis of 14-aryl or alkyl-14H-dibenzo[a,j]xanthenes by condensation of 2-naphthol and aldehydes. This reaction under heating or sonication conditions is very simple, affording good to excellent yields of products.     

Ferric sulfate [Fe2(SO4)3·xH2O]: an efficient heterogeneous catalyst for the synthesis of tetrahydroquinoline derivatives using Povarov reaction

Fe₂(SO₄)₃·xH₂O can be used as an efficient and reusable catalyst for the synthesis of pyrano- and furanotetrahydroquinolines via one-pot three-component Povarov reaction involving aromatic aldehydes, aromatic amines, and cyclic enol ethers. The catalyst is recyclable, economically viable, and environmentally benign. This protocol provides good yields and diastereoselectivity as well as applicability on a wide range of substrates.     

An efficient approach for the synthesis of novel methyl sulfones in acetic acid medium and evaluation of antimicrobial activity

A series of nine methyl sulphones ( 3a –3 i ) starting from the aldehydes ( 1a–1i ) were synthesized in two consecutive steps. In the first step, preparation of allyl alcohols ( 2a–2i ) from their corresponding aldehydes by the reaction of sodium borohydride in methanol at room temperature is reported. Finally, methyl sulphones are synthesized by condensing sodium methyl sulfinates with allyl alcohols in the presence of BF ₃ .Et ₂ O in acetic acid medium at room temperature for about 2–3 h. The reaction conditions are simple, yields are high (85%–95%), and the products were obtained with good purity. All the synthesized compounds were characterized by their ¹ H, ¹³ C NMR, and mass spectral analysis. All the title compounds were screened for antimicrobial activity. Among the compounds tested, the compound 3f has inhibited both Gram positive and Gram negative bacteria effectively and compound 3i has shown potent antifungal activity. These promising components may help to develop more potent drugs in the near future for the treatment of bacterial and fungal infections.     

One-pot three components synthesis of O-acetylcyanohydrins with TMSCN, acetic anhydride and carbonyl compounds under solvent-free condition

One-pot three components synthesis of O-acetylcyanohydrins has been developed in the presence of B(C₆F₅)₃ as the catalyst. Variety of aldehydes or ketones reacts with TMSCN and acetic anhydride (Ac₂O) under the influence of 1 mol % of B(C₆F₅)₃ to give good to excellent yield of the products without solvent at rt.     

Hydrated ferric sulfate catalyzed synthesis of 3-[(alkyl/arylthio)(aryl)methyl]-1H-indole derivatives through one-pot reaction

A wide variety of 3-[(alkyl/arylthio)(aryl)methyl]-1H-indole derivatives (4a–z) were synthesized through a one-pot three-component reaction from indoles, aromatic aldehydes, and thiols at room temperature using hydrated ferric sulfate as a Lewis acid catalyst. The key features of the present protocol are mild and simple reaction procedure, moderate to good yields, requirement of inexpensive and reusable catalyst, no formation of dithioacetals derivatives from the corresponding aldehydes as well as bis-(indolyl) methane derivatives.     

Fe（HSO4）3： An efficient,heterogeneous and reusable catalyst for the synthesis of 14-aryl- or alkyl- 14H-dibenzo[a,j]xanthenes

Fe（HSO4）3 has been used as an efficient and recyclable catalyst for the one-pot synthesis of 14-aryl- or alkyl-14Hdibenzo[aj]xanthene derivatives by the reaction of 2-naphtol and aldehydes. Different types of aromatic and aliphatic aldehydes are used in the reaction and in all cases the products were obtained in good to excellent yields.     

ZrOCl2·8H2O: an efficient Lewis acid catalyst for the one-pot multicomponent synthesis of β-acetamido ketones

Aromatic aldehydes were reacted in one-pot with enolisable ketones, acetonitrile and acetyl chloride at ambient temperature in the presence of ZrOCl₂·8H₂O to furnish the corresponding β-acetamido ketones in very good to excellent yields. X-ray crystallographic analysis of one anti-β-acetamido ketone exhibited a two-dimensional supramolecular framework by a combination of N-H?O, C-H?O and C-H?π (arene) hydrogen bonds.     

Highly stereocontrolled synthesis of fluorinated 2,6-trans dihydropyrans via Prins cyclization

A highly efficient method for the synthesis of fluorinated 2,6-trans dihydropyrans via BF₃·Et₂O-promoted Prins cyclization of allenic alcohols and aldehydes is developed. Various 2,6-trans fluorodihydropyrans are obtained in moderate to good yields with excellent diastereoselectivities.     

Highly efficient synthesis of homoallylic alcohols and amines via allylation of aldehydes and imines catalyzed by ZrOCl2·8H2O in water

The allylation of aldehydes and imines has efficiently been carried out by treatment with allyltributylstannane in the presence of a catalytic amount of ZrOCl₂·8H₂O in water to form the corresponding homoallylic alcohols and amines, respectively, in high yields.     

[IrCl(cod)]2-catalyzed direct oxidative esterification of aldehydes with alcohols

[IrCl(cod)]₂ catalyzed the oxidative esterification of a variety of aldehydes with methanol as a solvent in combination with K₂CO₃ under mild conditions (rt, 12 h). The oxidative esterification reaction of aliphatic aldehydes also took place with olefinic alcohols as reagents in toluene under similar conditions.     

Hydrated ferric sulfate catalyzed synthesis of 5,6-unsubstituted 1,4-dihydropyridines using three-component reaction

A wide variety of 5,6-unsubstituted 1,4-dihydropyridines derivatives (4a–q) were synthesized through a one-pot three-component reaction from α,β-unsaturated aldehydes, amines, and 1,3-diketones at room temperature using hydrated ferric sulfate as a Lewis acid catalyst. The key features of the present protocol are mild and simple reaction procedure, good to excellent yields, and use of inexpensive, recyclable, and environmentally benign catalyst.     

A facile approach for the synthesis of 14-aryl- or alkyl-14H-dibenzo[a,j]xanthenes under solvent-free condition

A facile, efficient and environment-friendly protocol for the synthesis of 14-aryl- or alkyl-14H-dibenzo[a,j]xanthenes has been developed by one-pot condensation of 2-naphthol with aliphatic and aromatic aldehydes in the presence of P₂O₅ or InCl₃ as catalysts under solvent-free conditions. The present approach offers the advantages of clean reaction, simple methodology, short reaction time, high yield, easy purification, and economic availability of the catalyst.     

HBF4·OEt2 as a mild and versatile reagent for the Ritter amidation of olefins: a facile synthesis of secondary amides

A variety of alkenes undergo smooth amidation with nitriles in the presence of HBF₄·OEt₂ at room temperature under mild conditions to afford the corresponding secondary amides in good to excellent yields. This is a highly efficient method for the preparation of α-aryl ethyl amides especially from vinyl arenes without any side reactions such as olefin polymerization. The use of readily available and easy to handle reagent HBF₄·OEt₂ makes this method simple, convenient, and practical.     

A chemical route for the synthesis of cubic bismuth zinc niobate pyrochlore nanopowders

Cubic bismuth zinc niobate pyrochlore (base composition (Bi_1.5Zn_0.5)(Zn_0.5Nb_1.5)O₇) powders were successfully prepared by a chemical method. The formation mechanism of the pyrochlore phase was investigated by TG-DSC, FT-IR, Raman, and X-ray diffraction (XRD). The optical bandgap for the powders treated at temperatures ranging from 500 to 700 °C is 3.0-3.1 eV, indicating low crystallization temperature for the pyrochlore phase. No detectable intermediary phases as BiNbO₄ or a pseudo-orthorhombic pyrochlore were observed at any time and the cubic-BZN phase was already formed after thermal treatment at temperatures as low as 500 °C. The phase formation study reveals that a well-crystallized single-phased nanopowder is obtained after calcination at 700 °C, indicating that the chemical synthesis conferred a higher chemical homogeneity and reactivity on the powder, modifying the crystallization mechanism.     

Efficient one-pot synthesis of functionalized piperidine scaffolds via ZrOCl2·8H2O catalyzed tandem reactions of aromatic aldehydes with amines and acetoacetic esters

A highly efficient diastereoselective one-pot synthesis of functionalized piperidines has been developed based on an aqua-compatible ZrOCl₂·8H₂O catalyst via tandem reactions of aromatic aldehydes, amines, and acetoacetic esters.     

Direct reductive amination and selective 1,2-reduction of α,β-unsaturated aldehydes and ketones by NaBH4 using H3PW12O40 as catalyst

A simple and convenient procedure for direct reductive amination of aldehydes and ketones with sodium borohydride is described. The reaction has been carried out in methanol in the presence of a catalytic amount of H₃PW₁₂O₄₀ (0.5 mol %). α,β-Unsaturated aldehydes and ketones can be easily converted into the corresponding allyl alcohols by reaction with H₃PW₁₂O₄₀ (0.5 mol %)/NaBH₄.     

InCl3-catalyzed four-component reaction: a novel synthesis of N-carbazolyl dihydropyridines

We have developed a simple, efficient, and environmentally benign microwave-assisted InCl₃-catalyzed synthesis of N-carbazolyldihydropyridines via a four-component reaction of 3-amino-9-ethylcarbazole, malononitrile, aromatic aldehydes, and acetylenic esters. The use of microwave heating allowed for reduced reaction times and resulted in higher yields. This four-component reaction is atom-efficient, high-yielding, and applicable to a wide variety of four-component reactions.     

Efficient synthesis of mono- and disubstituted 2,3-dihydroquinazolin-4(1H)-ones using KAl(SO4)2·12H2O as a reusable catalyst in water and ethanol

KAl(SO₄)₂·12H₂O was found to catalyze efficiently a one-pot three-component cyclocondensation of isatoic anhydride and primary amines or ammonia sources such as (NH₄)₂CO₃, NH₄OAc and NH₄Cl with aromatic aldehydes under mild conditions to afford the corresponding mono- and disubstituted 2,3-dihydroquinazolin-4(1H)-ones in good yields.     

First sonochemical,simple and solvent-free synthesis of chiral tert-butanesulfinimines using silica supported p-toluenesulfonic acid

A solvent-free, versatile procedure has been developed for the effective synthesis of tert-butanesulfinylimines of a variety of aldehydes using chiral tert-butanesulfinamides under green, sonochemical conditions. This method utilizes silica supported p-toluenesulfonic acid (pTSA·SiO₂) as an efficient, safer and inexpensive catalyst under aerobic conditions. The practicable simplicity, easy preparation of the catalyst from readily available substances, high substrate scope, excellent yields of products in short reaction times and environmentally benign (solvent-free sonochemical) conditions are the exceptional assets of this finding.