Synthesis of glutamic acid and glutamine peptides possessing a trifluoromethyl ketone group as SARS-CoV 3CL protease inhibitors

Trifluoromethyl-β-amino alcohol 11 [(4S)-tert-butyl 4-amino-6,6,6-trifluoro-5-hydroxyhexanoate] was synthesized in five steps starting from Cbz-l-Glu-OH 5 where the key step involved the introduction of the trifluoromethyl (CF₃) group to oxazolidinone 7, resulting in the formation of silyl ether 8 [(4S,5S)-benzyl 4-(2-(tert-butoxycarbonyl)ethyl)-5-(trifluoromethyl)-5-(trimethylsilyloxy)oxazolidine-3-carboxylate]. Compound 11 was then converted into four tri- and tetra-glutamic acid and glutamine peptides (1-4) possessing a CF₃-ketone group that exhibited inhibitory activity against severe acute respiratory syndrome coronavirus protease (SARS-CoV 3CL^pro).     

Convergent synthesis of the ABCDE-ring part of ciguatoxin CTX3C

Convergent synthesis of the ABCDE-ring part (2) of ciguatoxin CTX3C (1) has been achieved. A carbanion stabilized by a dimethyldithioacetal S-oxide group in the AB-ring part (4) readily reacted with an aldehyde group in the E-ring part (5). The resulting adduct was facilely converted to the corresponding β,γ-unsaturated α,ε-dihydroxy ketone (3). The subsequent reductive hydroxy-ketone-cyclization reactions constructed the CD-ring part efficiently. Thus, the ABCDE-ring part (2) was concisely synthesized in 10 steps in 11% overall yield from the AB-ring and the E-ring parts (4 and 5).     

A divergent approach for the total syntheses of cernuane-type and quinolizidine-type Lycopodium alkaloids

The divergent total syntheses of cernuane-type and quinolizidine-type Lycopodium alkaloids are described. A common intermediate 5 for the two types of alkaloids was assembled practically from (+)-citronellal via organocatalytic α-amination, followed by the construction of oxazolidinone that was used for diastereoselective allylation. Key compound 5 was converted into cermizine C (3), and this in turn was converted into senepodine G (4) by the regioselective Polonovsky-Potier reaction. The total synthesis of representative cernuane-type alkaloids, (−)-cernuine (1) as well as (+)-cermizine D (2), was also accomplished from 5 by utilizing asymmetric transfer aminoallylation as a key step.     

A convenient enantioselective synthesis of 3-asymmetrically substituted oxindoles as progesterone receptor antagonists

A convenient enantioselective synthesis of 3-asymmetrically substituted oxindoles is reported. Compound (2) prepared by radical cyclisation of (1) was used for the synthesis of racemic and enantiomerically pure 3-asymmetrically substituted oxindoles. Desulfurisation of (2) using Raney Ni yielded the racemate (5). Addition of (S)-1-phenylethanol to compound (2) yielded the diastereoisomer (21) the structure of which was determined using X-ray crystallography. Using a sequence of steps (21) was converted to the enantiomer (8). The enantiomer (9) was similarly prepared from (2) using (R)-1-phenylethanol.     

Regioselective synthesis of 3-aryl-5-(1H-indole-3-carbonyl)-4-hydroxyfuroic acids as potential insulin receptor activators

3-Methoxy-4-aryl-furan-2,5-dicarboxylic acid (8) is selectively converted into its C-5 methylester (6) by treatment with methyl chloroformate followed by decarboxylation in one flask. Acylation of the resulting half ester with a 7-substituted indole was performed under mild conditions to afford 3-aryl-5-(1H-indole-3-carbonyl)-4-methoxy-2-furoic acid (11). The synthetic utility of the resulting furoic acids as a skeleton in the synthesis of potential insulin receptor activators is established.     

Fluorinated molecules relevant to conducting polymer research

The synthesis of versatile fluorine compounds for conducting polymer research on fluorinated materials is presented. 1,2,4,5-Tetrafluorobenzene was converted to 1,2,4,5-tetrafluorobenzaldehyde (1) and protected as an acetal. This gave the acetals 1,2,4,5-tetrafluoro-3-(1,3-dioxol-2-yl)benzene (2a) and 1,2,4,5-tetrafluoro-3-(5,5-dimethyl-1,3-dioxan-2-yl)benzene (2b). Compounds 2a and 2b were converted into the semiprotected 2,3,5,6-tetrafluoroterephthaldehydes: 1,2,4,5-tetrafluoro-3-(1,3-dioxol-2-yl)-6-formylbenzene (3a) and 1,2,4,5-tetrafluoro-3-(5,5-dimethyl-1,3-dioxan-2-yl)-6-formylbenzene (3b). While 3a was easily deprotected to give 2,3,5,6-tetrafluoroterephthaldehyde (4) compound 3b proved very resilient to hydrolysis and gave a 1:1 mixture of 4 and 1,2,4,5-tetrafluoro-3,6-bis(5,5-dimethyl-1,3-dioxan-2-yl)benzene (5). Compound 4 was reduced to 1,2,4,5-tetrafluoro-3,6-dihydroxymethylbenzene (6) and converted into 1,2,4,5-tetrafluoro-3,6-dibromomethylbenzene (7). Compound 7 was finally converted into 1,2,4,5-tetrafluoro-3,6-bis(diethylphosponylmethyl)benzene (8). Compounds 4 and 8 are versatile fluorinated molecules that can be used to replace their hydrogen counterparts in many molecules and materials. To illustrate this compounds 4 and 8 were oligomerised to give partially fluorinated polyphenylenevinylene (9).     

Synthesis of substituted 2-aroyl-3-methylchromen-4-ones from isovanillin via 2-aroyl-3-methylchroman intermediates

The synthesis of substituted 2-aroyl-3-methylchromen-4-one from isovanillin is described. O-Allylphenol (2) prepared from isovanillin (1) was allowed to react with various α-bromoacetophenone (3) to produce 2-(2-allyl-3,4-dimethoxy)phenoxy-1-aroylethanones (4). The resultant 4 were treated with 2 equiv of potassium tert-butoxide to afford the substituted 2-aroyl-3-methylchromans (5) through an isomerization of an allylic double bond and a carbanion-olefin intramolecular 6-endo-trig cyclization reaction. Subsequently, resultant 5 were oxidized with DDQ to yield the title compound 6, in good over-all yields.     

(+)-Cystothiazole G: isolation and structural elucidation

Palladium-catalyzed cyclization-methoxycarbonylation of (2R,3S)-3-methylpent-4-yne-1,2-diol (6) derived from (2R,3S)-epoxybutanoate 5 followed by methylation gave the tetrahydro-2-furylidene acetate (−)-7, which was converted to the left-half aldehyde (+)-3. A Wittig reaction between (+)-3 and the phosphoranylide derived from the bithiazole-type phosphonium iodide 4 using lithium bis(trimethylsilyl)amide afforded the (+)-cystothiazole G (2), whose spectral data were identical with those of the natural product (+)-2. Thus, the stereochemistry of cystothiazole G (2) was proved to be (4R,5S,6(E)).     

Design and synthesis of (E)-4-((3-ethyl-2,4,4-trimethylcyclohex-2-enylidene)methyl)benzoic acid

(E)-4-((3-Ethyl-2,4,4-trimethylcyclohex-2-enylidene)methyl)benzoic acid, 6, was synthesized in 87% starting from β-cyclocitral. The target compound 6 was synthesized starting from 1 via a Grignard reaction to form alcohol 2. Compound 2 was converted to Wittig salt 3 by treatment with aldehyde 4 in butyllithium and hexane at −78 °C to form ester 5. Ester 5 was saponified and, following acidification, acid 6 was isolated as white solid yield 87%.     

Ring transformation of chromone-3-carboxamide

4-Hydroxycoumarin-3-carboxaldehyde (5) was obtained from chromone-3-carboxaldehyde (1) via chromone-3-carboxamide (2) and 3-aminomethylene-2H-chroman-2,4-dione (3). 3-Alkylaminomethylenechroman-2,4-diones (7,8) were obtained from the reaction of primary aliphatic amines with chromone-3-carboxamide (2). Treatment of chromone-3-carboxamide with sodium methoxide gives 3-(2-hydroxybenzoyl)-2H-chromeno[2,3-b]pyridine-2,5(1H)-dione (9).     

Convergent synthesis of the IJKLM-ring part of ciguatoxin CTX3C

Convergent synthesis of the IJKLM-ring part (2) of ciguatoxin CTX3C has been achieved from the I-ring and the L-ring parts (4 and 5) in total eight steps in 27% overall yield. The carbanion derived from 4, stabilized by a dimethyldithioacetal S-oxide group, was readily reacted with aldehyde 5 to give an adduct, which was facilely transformed into the corresponding α,ε-dihydroxy ketone 3. The JK-ring formation from 3 under reductive conditions followed by oxidative M-ring cyclization efficiently led to the pentacyclic ether 2. Improved synthesis of 6, a synthetic intermediate for 4, was also established.     

The regioselectivity of the addition of benzeneselenyl chloride to 7-azanorborn-5-ene-2-yl derivatives is controlled by the 2-substituent: new entry into 3- and 4-hydroxy-5-substituted prolines

The electrophilic addition of benzeneselenyl chloride to the alkene moiety of 7-azabicyclo[2.2.1]hept-5-en-2-yl derivatives has been studied. With camphanates 8 and 9N-Boc-5-endo-chloro-6-exo-phenylseleno-7-azanorborn-2-yl camphanates 10 and 11 are obtained with high regioselectivity due to a steric control. With N-Boc-7-azanorbor-5-en-2-one (2) the corresponding 6-endo-chloro-5-exo-phenylseleno derivative 15 is obtained in high yield due to a kinetic control attributed to the electron-releasing ability of the homoconjugated carbonyl group. Bicyclic adducts 10 and 11 and 15 are readily converted into 4-hydroxy-(14) and 3-hydroxy-5-substituted proline derivatives 19, respectively.     

Polyhydroxylated pyrrolidines: synthesis from d-fructose of new tri-orthogonally protected 2,5-dideoxy-2,5-iminohexitols

The readily available 3-O-benzyl-1,2-O-isopropylidene-β-d-fructopyranose (2) was transformed into its 5-O- (3) and 4-O-benzoyl (4) derivative. Compound 4 was straightforwardly transformed into 5-azido-4-O-benzoyl-3-O-benzyl-5-deoxy-1,2-O-isopropylidene-β-d-fructopyranose (7) via the corresponding 5-deoxy-5-iodo-α-l-sorbopyranose derivative 6. Cleavage of the acetonide in 7 to give 8, followed by regioselective 1-O-silylation to 9 and subsequent catalytic hydrogenation gave a mixture of (2S,3R,4R,5R)- (10) and (2R,3R,4R,5R)-4-benzoyloxy-3-benzyloxy-2′-O-tert-butyldiphenylsilyl-2,5-bis(hydroxymethyl)pyrrolidine (12) that was resolved after chemoselective N-protection as their Cbz derivatives 11 and 1a, respectively. Stereochemistry of 11 and 1a could be determined after total deprotection of 11 to the well known DGDP (13). Compound 2 was similarly transformed into the tri-orthogonally protected DGDP derivative 18.     

Tetracyclic 1,6-methano-[10]annulenes a novel class of steroidal annulenes

Reaction of 19-hydroxyandrosta-4,6-diene-3,17-dione (8b) and the corresponding Δ⁷-compound (8c) with diethyl-(2-chloro-1,1,2-trifluoroethyl)-amine affords 5β,19-cyclo-Δ^1,6- and 5β,19-cyclo-Δ^1,7-3-ketones (4b) and (4c) respectively. Solvolysis experiments with the 19-tosylates of the 19-hydroxy-Δ^4,6- and Δ^4,7-3-ketones (8b) and 8c) are described as alternate approaches to (4b) and (4c). Exposure of 5β,19-cyclo compounds (4b) and (4c) to acetic anhydride-acetic acid-p-toluenesulfonic acid yields the respective 3-acetoxycycloheptatrienes (5a) and (6a). The latter substance (6a) is converted into the novel tetracyclic 1,6-methano-[10]annulene (2a) on exposure to N-bromosuccinimide in boiling carbon tetrachloride. Synthesis of the corresponding 3-methoxy- and 3-desoxy-1,6-methano-[10]annulenes (2b) and (2c) are also described. The NMR spectra of (2a), (2b) and (2c) and related intermediates are discussed.     

Methyl 3-bromomethyl-3-butenoate as an isopentane building block for the stereoselective preparation of (S)-4-methyl-3,6-dihydro-2H-pyran-2-carbaldehyde and (+)-faranal

(S)-4-Methyl-3,6-dihydro-2H-pyran-2-carbaldehyde (3), the common intermediate in the syntheses of the C17-C27 subunit of laulimalide (4) and (+)-faranal (5), the trail pheromone of the pharaoh ant, Monomorium pharaonis, were obtained via transformation of methyl 3-bromomethyl-3-butenoate (1) into allylstannane 2 and subsequent allylation of (benzyloxy)acetaldehyde (6) in accordance with the Keck procedure as the key steps.     

Microwave-assisted synthesis of novel bis(2-thioxothiazolidin-4-one) derivatives as potential GSK-3 inhibitors

(5Z,5′Z)-3,3′-(1,4-Phenylenebis(methylene)-bis-(5-arylidene-2-thioxothiazolidin-4-one) derivatives (5a-r) have been synthesized by the condensation reaction of 3,3′-(1,4- or 1,3-phenylenebis(methylene))bis(2-thioxothiazolidin-4-ones) (3a,b) with suitably substituted aldehydes (4a-f) or 2-(1H-indol-3-yl)2-oxoacetaldehydes (8a-c) under microwave conditions. The bis(2-thioxothiazolidin-4-ones) were prepared from the corresponding primary alkyl amines (1a,b) and di-(carboxymethyl)-trithiocarbonyl (2). The 2-(1H-indol-3-yl)-2-oxoacetaldehydes (8a-c) were synthesized from the corresponding acid chlorides (7a-c) using HSnBu₃.     

Novel diaminoaluminum halides and a diaminoaluminum hydride: 1,3,2-Diazaalumina-[3]ferrocenophanes

The dilithiated derivative 2 of 1,1′-bis(trimethylsilylamino)ferrocene (1) reacts with the pyridine adducts of the aluminum trihalides AlX₃ (X = Cl, Br, I) to give the respective 1,3,2-diazaalumina-[3]ferrocenophanes (4b, c, d) as pyridine adducts. The fluoride 4a could not be obtained in this way. The reaction of 1,1′-bis(trimethylsilylamino)ferrocene (1) with the dimethyl(ethyl)amine- or pyridine adduct of aluminium trihydride gave the 1,3,2-diazaalumina-[3]ferrocenophanes (5) and (6) as the amine and pyridine adducts, respectively. Treatment of 5 with trimethyltin fluoride afforded the adduct 7 with an Al–F function. Addition of pyridine converted 7 into the desired pyridine adduct of the fluoride (4a). The molecular structures of the pyridine adducts 4a, 4b, 4c and 6 were determined by X-ray analysis. The pyridine is in the trans-position relative to the N–Si bond vectors, and temperature dependent solution-state NMR spectra prove that prominent structural features are retained in solution.     

Synthesis of polyfunctionalized furans from 3-acetyl-1-aryl-2-pentene-1,4-diones

The BF₃-catalyzed cyclization of 3-acetyl-1-aryl-2-pentene-1,4-diones 1a-e in the presence of water in boiling tetrahydrofuran gave bis(3-acetyl-5-aryl-2-furyl)methanes 2a-e in 26-79% yields along with a small amount of 3-acetyl-5-aryl-2-methylfurans 3a-e. The exact structure of 2a was determined by X-ray crystallography. The use of a half volume of the solvent for the reaction of 1a resulted in the formation of 2,4-bis(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-phenylfuran (4) together with 2a and 3a. A similar reaction of 1a was carried out in the presence of 3-acetyl-5-(4-methylphenyl)-2-methylfuran (3d) to afford 4-(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-(4-methylphenyl)-2-methylfuran (5) in 49% yield. The BF₃-catalyzed reaction of 1a with 2,4-pentanedione in dry tetrahydrofuran at 23°C gave 3-(3-acetyl-5-phenyl-2-furfuryl)-4-hydroxy-3-penten-2-one (6a) and 3-(3-acetyl-2-methyl-4-phenyl-5-furyl)-4-hydroxy-3-penten-2-one (7a) in 66 and 24% yields, respectively. The product distribution depended on the reaction temperature. A similar reaction of 1b-e also yielded the corresponding trisubstituted furans 6b-e and tetrasubstituted furans 7b-e in good yields. These results suggested the presence of the furfuryl carbocation intermediate A during the reaction. The one-pot synthesis of 6a and 7a was also achieved by a similar reaction using phenylglyoxal. The deoxygenation of 1a with triphenylphosphine gave 3a in 88% yield, while 1a was treated with concentrated hydrochloric acid to yield 3-acetyl-2-chloromethyl-5-phenylfuran (8) which was quantitatively transformed in ethanol into 3-acetyl-2-ethoxymethyl-5-phenylfuran (9) and in water into 3-acetyl-5-phenylfurfuryl alcohol (10), respectively. In addition, the Diels-Alder reaction of cyclopantadiene with 1a gave the corresponding [4+2] cycloaddition products 11 and 12.     

Temporary thio-derivatization in the synthesis of (+)-4-acetylbromoxone

A stereocontrolled synthesis of the marine natural products (+)-bromoxone (1) and (+)-4-acetylbromoxone (2) is reported. The sequence features the enzymatic kinetic resolution of 4-hydroxycyclohexenone (6) via its S-benzyl adduct. Thereafter, a base-mediated elimination-silylation generated an optically active (−)-4S-4-tert-butyldimethylsilyoxycyclohexenone (5), which then underwent diastereoselective epoxidation. Saegusa-Ito oxidation enabled formation of the corresponding α,β-unsaturated ketone 13. Bromination-elimination and subsequent removal of the silicon protecting group afforded (+)-bromoxone (1) which was converted into (+)-(4S,5R,6R)-4-acetoxy-2-bromo-5,6-epoxycyclohex-2-enone (2) [(+)-4-acetylbromoxone]. Using a luciferase gene reporter assay ED₅₀ for NFκB inhibition of 9 μM was determined.     

New total synthesis of (+)-cystothiazole A based on palladium-catalyzed cyclization-methoxycarbonylation

Palladium-catalyzed cyclization-methoxycarbonylation of (2R,3S)-3-methylpenta-4-yne-1,2-diol (6) derived from (2R,3S)-epoxy butanoate 7 followed by methylation gave the tetrahydro-2-furylidene acetate (−)-10, which was converted to the left-half aldehyde (+)-3. A Wittig reaction between (+)-4 and the phosphoranylide derived from the bithiazole-type phosphonium iodide 4 using lithium bis(trimethylsilyl)amide afforded the (+)-cystothiazole A (2).