Flame synthesis of hierarchical nanotubular rutile titania derived from natural cellulose substance

Hierarchical nanotubular rutile titania material was fabricated by facile flame burning of ultrathin titania gel film coated cellulose nanofibres of commercial cellulose substance (filter paper), which possesses efficient photocatalytic performance for degradation of organic dye (methylene blue) under ultraviolet irradiation.     

New synthetic ways for the preparation of high-performance liquid chromatography supports.

The latest developments and in particular important synthetic aspects for the preparation of modern HPLC supports are reviewed. In this context, the chemistry of inorganic supports based on silica, zirconia, titania or aluminum oxide as well as of organic supports based on poly(styrene-divinylbenzene), acrylates, methacrylates and other, more specialized polymers is covered. Special consideration is given to modern approaches such as sol-gel technology, molecular imprinting, perfusion chromatography, the preparation of monolithic separation media as well as to organic HPLC supports prepared by new polymer technologies such as ring-opening metathesis polymerization. Synthetic particularities relevant for the corresponding applications are outlined.     

Cellulose nanocrystal submonolayers by spin coating

Dilute concentrations of cellulose nanocrystal solutions were spin coated onto different substrates to investigate the effect of the substrate on the nanocrystal submonolayers. Three substrates were probed: silica, titania, and amorphous cellulose. According to atomic force microscopy (AFM) images, anionic cellulose nanocrystals formed small aggregates on the anionic silica substrate, whereas a uniform two-dimensional distribution of nanocrystals was achieved on the cationic titania substrate. The uniform distribution of cellulose nanocrystal submonolayers on titania is an important factor when dimensional analysis of the nanocrystals is desired. Furthermore, the amount of nanocrystals deposited on titania was multifold in comparison to the amounts on silica, as revealed by AFM image analysis and X-ray photoelectron spectroscopy. Amorphous cellulose, the third substrate, resulted in a somewhat homogeneous distribution of the nanocrystal submonolayers, but the amounts were as low as those on the silica substrate. These differences in the cellulose nanocrystal deposition were attributed to electrostatic effects: anionic cellulose nanocrystals are adsorbed on cationic titania in addition to the normal spin coating deposition. The anionic silica surface, on the other hand, causes aggregation of the weakly anionic cellulose nanocrystals which are forced on the repulsive substrate by spin coating. The electrostatically driven adsorption also influences the film thickness of continuous ultrathin films of cellulose nanocrystals. The thicker films of charged nanocrystals on a substrate of opposite charge means that the film thickness is not independent of the substrate when spin coating cellulose nanocrystals in the ultrathin regime (<100 nm).     

From Nanorods to Atomically Thin Wires of Anatase TiO2: Nonhydrolytic Synthesis and Characterization

A nonhydrolytic two‐step chemical process has been developed to synthesize ultrathin, nearly monodisperse TiO₂ (anatase) wires with tunable diameters of 5 nm to approximately 4 Å, reaching the atomic length scale. The high‐quality anatase titania atomically thin wires can be doped and stabilized with nitrogen species by introducing suitable nitrogen‐containing molecules. The ultrathin wires, particularly the atomically thin wires, as well as the precursor, have been thoroughly characterized by an extensive series of structural, spectroscopic, and other techniques. Possible formation mechanisms for the rods and the wires are proposed on the basis of experimental results obtained under varying reaction conditions. Also demonstrated are the pronounced effects of size and N‐doping on the electronic, optical, and phononic properties of the anatase titania wires in the smallest size regime.     

A facile route to a highly stabilized hierarchical hybrid of titania nanotube and gold nanoparticle

A hierarchical hybrid of gold nanoparticles and titania nanotubes with high metal loading was prepared by a one-pot approach using a natural cellulosic substance as template. Gold nanoparticles were uniformly anchored onto titania nanotubes, and particle fusion at high temperature was suppressed by surface coating with an ultrathin titania layer.     

Photocatalytic properties of titania nanostructured films fabricated from Titania nanosheets

We examined the photochemical properties of well-ordered multilayer films of titania nanosheets prepared on quartz-glass substrate using the layer-by-layer deposition method. The photocatalytic decomposition of gaseous 2-propanol and bleaching of Methylene Blue dye under UV light illumination were measured to evaluate the photocatalytic oxidation ability. Photoinduced hydrophilicity was also studied by measuring the contact angle of water droplets on the film. The results indicated that titania nanosheets had good photoinduced hydrophilicity. The monolayer film of titania nanosheets showed almost identical activity compared with well investigated sol-gel derived anatase TiO(2) film, while its photocatalytic oxidation activity was low by more than an order of magnitude. This fact suggests that photoinduced hydrophilicity could not be explained simply in terms of the photocatalytic removal of hydrophobic organic species adsorbed on the surface. The photocatalytic oxidation activity and the photoinduced hydrophilic conversion rate decreased with increasing number of nanosheet layers, suggesting that photogenerated carriers produced in the internal part of the multilayer films can hardly diffuse to the surface layer. Photochemical properties of ultrathin anatase films obtained simply by heating the titania nanosheet films were evaluated as well, and also revealed high photoinduced hydrophilicity.     

Nanocopying of individual DNA strands and formation of the corresponding surface pattern of titania nanotube

Titania nanotube was prepared by nanocopying of the individual DNA double strand as template. DNA was first spread on a solid substrate, and its molecular surface was coated with an ultrathin titania layer by 3 cycles of the surface sol-gel process. Fluorescence microscopic images before and after titania coating of the DNA/YOYO-1 complex were essentially identical, showing that the titania coating did not change the chemical properties of the complex. Titania coating effectively prohibited chemical degradation of titania-coated DNA with DNase I and physically separated the DNA strand from the surrounding environment with an ultrathin titania barrier. The morphology of the DNA strand was preserved, as confirmed by microscopic and spectroscopic observations. The presence of the hollow (tubular) structure was confirmed by a silver staining experiment coupled with scanning transmission electron microscopy-energy-dispersive X-ray spectroscopy (STEM-EDX) analysis. The present finding shows the effectiveness of nanocopying of the individual DNA strand.     

Enhanced removal of bilirubin on molecularly imprinted titania film

Titania film imprinted by bilirubin molecule at the surface of quartz crystal was prepared using molecular imprinting and surface sol-gel process. The molecularly imprinted titania film was characterized by FTIR spectra, and the interaction between bilirubin and imprinted film was investigated using quartz crystal microbalance (QCM) technique. Compared with pure titania film, the molecularly imprinted titania film exhibits a much higher adsorption capacity for the target molecule, and the adsorption kinetic parameter estimated from the in situ frequency measurement is about 1.6×10(8) M(-1), which is ten times higher than that obtained on pure titania film. The photocatalytic measurements indicate that the bilirubin adsorbed on molecularly imprinted titania film can be completely removed under UV illumination. Moreover, our study indicates that the molecularly imprinted titania film possesses a better stability and reusability.     

Precise Size Control over Ultrafine Rutile Titania Nanocrystallites in Hierarchical Nanotubular Silica/Titania Hybrids with Efficient Photocatalytic Activity

Hierarchical‐structured nanotubular silica/titania hybrids incorporated with particle‐size‐controllable ultrafine rutile titania nanocrystallites were realized by deposition of ultrathin titania sandwiched silica gel films onto each nanofiber of natural cellulose substances (e.g., common commercial filter paper) and subsequent flame burning in air. The rapid flame burning transforms the initially amorphous titania into rutile phase titania, and the silica gel films suppress the crystallite growth of rutile titania, thereby achieving nano‐precise size regulation of ultrafine rutile titania nanocrystallites densely embedded in the silica films of the nanotubes. The average diameters of these nanocrystallites are adjustable in a range of approximately 3.3–16.0 nm by a crystallite size increment rate of about 2.4 nm per titania deposition cycle. The silica films transfer the electrons activated by crystalline titania and generate catalytic reactive species at the outer surface. The size‐tuned ultrafine rutile titania nanocrystallites distributed in the unique hierarchical networks significantly improve the photocatalytic performance of the rutile phase titania, thereby enabling a highly efficient photocatalytic degradation of the methylene blue dye under ultraviolet light irradiation, which is even superior to the pure anatase‐titania‐based materials. The facile stepwise size control of the rutile titania crystallites described here opens an effective pathway for the design and preparation of fine‐nanostructured rutile phase titania materials to explore potential applications.     

Molecularly imprinted polystyrene–titania hybrids with both ionic and π–π interactions: a case study with pyrenebutyric acid

We present hybrid films consisting of a composite prepared from polystyrene (PS) and titanium dioxide (titania; TiO₂) and molecularly imprinted with 1-pyrenebutyric acid (PBA). The interaction of PBA with the polymer is shown to occur via binding of the carboxylic group to TiO₂ and hydrophobic interaction of the pyrene moiety with the PS network. We investigated the effects of the PS fraction on morphology, imprinting properties, and guest binding. The template could be completely removed by incubating the films in an acetonitrile solution of pyrene, which is due to the stronger π–π interaction between PBA and pyrene than the interaction between PBA and its binding site. A guest binding study with pyrene, 1-aminopyrene, pyrenemethanol, and anthracene-9-carboxylic acid showed that the hybrid films possessed selectivity and much higher binding capacity for PBA. This study demonstrates the first case of clear PS-assisted imprinting, where the π–π interaction of the template with a linear (non-crosslinked) polymer creates selective binding sites and enhances the binding capacity. This is a driving force for guest binding in addition to the interaction of the template/analyte with TiO₂. All molecularly imprinted films displayed better binding, repeatability and reversibility compared to the respective non-imprinted films.

Sol–gel titania coating on unmodified and surface-modified polyimide films

Sol–gel coating of metal oxides on polymer substrates is a useful process to fabricate various organic–inorganic hybrid materials under mild conditions. However, this process is hardly applicable to pristine polyimide (PI) films because their surfaces do not display effective functional groups for metal oxide coatings. In this study, we firstly examined direct sol–gel coating of titania thin layers on unmodified PI film surfaces. The results confirmed homogeneous, ultrathin titania layer coating and showed that the thickness and microscopic morphology of the titania layers were affected by titanium alkoxide concentrations in the spin coating solutions. We next investigated titania layer coating on surface-modified PI films that prepared using alkaline hydrolysis, which generated carboxylic acid groups on the film surfaces. Optimal hydrolysis time was determined using FT-IR spectroscopy and contact angle measurements. After sol–gel titania coating on the hydrolyzed PI film surfaces, the Scotch tape test was conducted to evaluate adhesion strength between the titania layers and PI film surfaces. Morphological observations of the sample surfaces after the tests clearly showed that surface modification of PI films increased titania layer adhesions. Effect of hydrothermal treatments on film formability and adhesion strength between titania-PI film interfaces was also evaluated.     

Hierarchical‐Structured Anatase‐Titania/Cellulose Composite Sheet with High Photocatalytic Performance and Antibacterial Activity

Bulk hierarchical anatase‐titania/cellulose composite sheets were fabricated by subjecting an ultrathin titania gel film pre‐deposited filter paper to a solvo‐co‐hydrothermal treatment by using titanium butoxide as the precursor to grow anatase‐titania nanocrystallites on the cellulose nanofiber surfaces. The titanium butoxide specie is firstly absorbed onto the nanofibers of the cellulose substance through a solvothermal process, which was thereafter hydrolyzed and crystallized upon the subsequent hydrothermal treatment, leading to the formation of fine anatase‐titania nanoparticles with sizes of 2–5 nm uniformly anchored on the cellulose nanofibers. The resulting anatase‐titania/cellulose composite sheet shows a significant photocatalytic performance towards degradation of a methylene blue dye, and introduction of silver nanoparticles into the composite sheet yields an Ag‐NP/anatase‐titania/cellulose composite material possessing excellent antibacterial activity against both Gram‐positive and Gram‐negative bacteria.     

Unusual crystallization behaviors of anatase nanocrystallites from a molecularly thin titania nanosheet and its stacked forms: increase in nucleation temperature and oriented growth

Crystallization behaviors of anatase nanocrystallites from an ultrathin two-dimensional reactant composed of exfoliated titania nanosheets have been studied by monitoring the heating process of their well-organized films, with which the film thickness can be controlled from a molecularly thin monolayer to a stacked multilayer structure with a stepwise increment of approximately 1 nm. The heated products were identified by means of total reflection fluorescence X-ray absorption near-edge structure analysis and in-plane X-ray diffraction measurements using a synchrotron radiation source. The films composed of five or more layers of stacked nanosheets were transformed into anatase at 400-500 degrees C, which is a normal crystallization temperature of anatase from bulk reactants. As the film became thinner by decreasing the number of nanosheet layers to five or less, the crystallization temperature was found to increase and finally reached 800 degrees C for the monolayer film. Interestingly, preferential growth of anatase along the c-axis was strongly promoted for these ultrathin films. These unusual behaviors may be understood in terms of crystallization from the two-dimensional system of scarcely distributed reactants. The titania nanosheet crystallite is much thinner than the unit cell dimensions of anatase, and therefore, extensive atomic diffusion is required for the transformation particularly for the ultrathin films with a critical number (2-3) of stacked nanosheet layers. There is some structural similarity between anatase and titania nanosheet, which may account for the oriented growth of anatase nanocrystallites.     

Ultrathin titania coating for high-temperature stable SiO2/Pt nanocatalysts

The facile synthesis of silica supported platinum nanoparticles with ultrathin titania coating to enhance metal-support interactions suitable for high temperature reactions is reported, as thermal and structure stability of metal nanoparticles is important for catalytic reactions.     

Ternary luminescent lanthanide-centered hybrids with organically modified titania and polymer units

Nicotinic acid (NA) is grafted to titanium alkoxide to achieve functional precursor Ti-NA, which then is coordinated to lanthanide ions (Tb³⁺/Eu³⁺) to prepare the binary titania hybrid materials Ti-NA-Eu/Ti-NA-Tb via a sol–gel process in the presence of water. Furthermore, two types of ternary titania hybrid materials, Ti-NA-Ln-PMAA/Ti-NA-Ln-PVP, are assembled by the introduction of the organic polymers polymethacrylic acid (PMAA)/polyvinylpyrrolidone (PVP) into the above system. The FTIR spectra of these titania hybrid materials confirm their basic composition, and the X-ray diffraction patterns reveal that they are amorphous. Luminescence spectra and lifetimes of these titania hybrids are recorded, revealing that these hybrid materials with organic polymers exhibit longer luminescence lifetimes and higher quantum efficiencies.     

有机电解液在阳极氧化法制备TiO2纳米管中的应用

二氧化钛纳米管由于其特殊的结构和优异的性能,在很多领域都有着重要的应用前景。阳极氧化法是制备二氧化钛纳米管的一种主要方法。近来,在阳极氧化法中使用有机电解液来制备二氧化钛纳米管取得了非常显著的效果。与传统的水溶性电解液相比,其深宽比和光电转换效率有了很大的提高。本文主要介绍了二氧化钛纳米管的阳极氧化原理以及有机电解液在阳极氧化法中对二氧化钛纳米管生长过程的影响。     

Hierarchical,Titania‐Coated,Carbon Nanofibrous Material Derived from a Natural Cellulosic Substance

Hierarchical, titania‐coated, nanofibrous, carbon hybrid materials were fabricated by employing natural cellulosic substances (commercial filter paper) as a scaffold and carbon precursor. Ultrathin titania films were firstly deposited by means of a surface sol–gel process to coat each nanofiber in the filter paper, and successive calcination treatment under nitrogen atmosphere yielded the titania–carbon composite possessing the hierarchical morphologies and structures of the initial paper. The ultrathin titania coating hindered the coalescence effect of the carbon species that formed during the carbonization process of cellulose, and the original cellulose nanofibers were converted into porous carbon nanofibers (diameters from tens to hundreds of nanometers, with 3–6 nm pores) that were coated with uniform anatase titania thin films (thickness ≈12 nm, composed of anatase nanocrystals with sizes of ≈4.5 nm). This titania‐coated, nanofibrous, carbon material possesses a specific surface area of 404 m² g^?1, which is two orders of magnitude higher than the titania–cellulose hybrid prepared by atomic layer deposition of titania on the cellulose fibers of filter paper. The photocatalytic activity of the titania–carbon composite was evaluated by the improved photodegradation efficiency of different dyes in aqueous solutions under high‐pressure, fluorescent mercury‐lamp irradiation, as well as the effective photoreduction performance of silver cations to silver nanoparticles with ultraviolet irradiation.     

Electrokinetic study of adsorption of ionic surfactants on titania from organic solvents

The electrokinetic potential of titania was studied as a function of concentration of SDS, DOSS and CTMABr in a series of solvents. In water and 50–50 water–methanol mixture, which are the most polar studied solvents, the organic ion is adsorbed on titania and the small inorganic ion remains in solution. In hexane the adsorption behavior is reversed, that is, the organic ion remains in solution and the small inorganic ion is adsorbed on titania. The borderline between these two types of behavior corresponds to solvent dielectric constant of about 25. In solvents, which have a dielectric constant in this range (methanol and 1-propanol) the adsorption preferences vary from one surfactant to another. The affinities of the organic ion and of the small inorganic ion to the surface are often similar, and then none of the ionic components is preferentially adsorbed, and the electrokinetic potential is not affected. In such cases, ionic surfactants are not suitable as agents for regulation of zeta potential.     

On the Mechanism of Urea‐Induced Titania Modification

The mechanism of surface modification of titania by calcination with urea at 400 °C was investigated by substituting urea by its thermal decomposition products. It was found that during the urea‐induced process titania acts as a thermal catalyst for the conversion of intermediate isocyanic acid to cyanamide. Trimerization of the latter produces melamine followed by polycondensation to melem‐ and melon‐based poly(aminotri‐s‐triazine) derivatives. Subsequently, amino groups of the latter finish the process by formation of Ti? N bonds through condensation with the OH‐terminated titania surface. When the density of these groups is too low, like in substoichiometric titania, no corresponding modification occurs. The mechanistic role of the polytriazine component depends on its concentration. If present in only a small amount, it acts as a molecular photosensitizer. At higher amounts it forms a crystalline semiconducting organic layer, chemically bound to titania. In this case the system represents a unique example of a covalently coupled inorganic–organic semiconductor photocatalyst. Both types of material exhibit the quasi‐Fermi level of electrons slightly anodically shifted relative to that of titania. They are all active in the visible‐light mineralization of formic acid, whereas nitrogen‐modified titania prepared from ammonia is inactive.     

Replication of dendrimer monolayer as nanopores in titania ultrathin film

An ultrathin titania film with molecular-sized cavities was synthesized by treating a ca. 8 nm thick (TiO2)3(dendrimer)(TiO2)2 sandwich film with activated oxygen gas.