Comparison of Microwave-Assisted Digestion Methods and Selection of Internal Standards for the Determination of Rh, Pd and Pt in Dust Samples by ICP-MS

Different temperature-pressure controlled microwave-assisted digestion methods were compared for the digestion of dust samples prior to the determination of rhodium and platinum by inductively coupled plasma mass spectrometry (ICP-MS). The results obtained for platinum and rhodium in the digested reference material (BCR-723, road dust) were generally in good agreement with the certified values. However, the determination of matrix elements (Zn, Rb, Sr, Y, Hf and Pb) showed clear differences between the digestion methods. In addition, different internal standards were compared in the determination rhodium, palladium and platinum by ICP-MS. According to the results, even serious non-spectral interferences can be corrected by choosing a suitable internal standard or combination of internal standards.     

Investigation of ICP-MS spectral interferences in the determination of Rh, Pd and Pt in road dust: Assessment of correction algorithms via uncertainty budget analysis and interference alleviation by preliminary acid leaching

A method for classification of the potential spectral interferences in inductively coupled plasma mass spectrometry (ICP-MS) was proposed based on statistical assessment of the interfering signals. The concept was applied to investigate the variety of spectral interferences over the isotopes of Rh, Pd and Pt concerning their analysis in road dust samples. For the significant interferences the applicability of mathematical corrections using two alternative algorithms were studied by uncertainty budget analysis and the approach resulting in lower combined uncertainty of the corrected signals was selected. Further the uncertainty evaluation was used for assessment of the most appropriate Pd isotope to be measured. The adequateness of the mathematical corrections for Rh and Pd was highly relevant to the number of elements causing spectral interferences and the relative analyte/interferent concentrations. This was overcome by preliminary road dust leaching with 0.35 mol l⁻¹ hydrochloric acid. Interferents present as easily soluble salts were substantially removed form the samples while the platinum group metals were not leached which allowed a relative analyte preconcentration to be obtained. For the leached samples the isotopes of Rh and Pd were still spectrally interfered from Sr, Y and Pb but at considerably lesser degree thus after mathematical correction the ICP-MS analysis of Rh, Pd and Pt was reliable and robust using the isotopes 103, 105 and 195, respectively. The method was validated via an alternative analysis based on selective separation of the platinum group metals by microwave-assisted cloud point extraction.     

Investigation of the solubilization of car-emitted Pt,Pd and Rh in street dust and spiked soil samples

A sequential extraction procedure (three-step), proposed by the Standards, Measurements and Testing Programme (formerly BCR) of the European Union, was applied to street dust and spiked soil samples for the determination of PGEs. Analyses were carried out using inductively coupled plasma-mass spectrometry (ICP-MS). The results indicate that up to 5% from Pt, 70% from Pd and 14% from Rh are in mobile forms in street dust. The results for the soil samples spiked with crushed catalytic converter are significantly lower indicating that PGEs are oxidised more efficiently in natural conditions. Additionally Pt and Pd bound to humic acids were investigated.     

铂族元素在环境和生物样品中的积累及毒性研究进展

由汽车尾气净化器的安装使用而导致环境中的铂族元素尤其是铂、钯、铑的含量逐渐增长,铂族元素对于生活和生态环境的影响也越来越多受到关注.论述了汽车三元催化剂中铂族元素毒性、铂族元素在环境和生物样品的分布、环境样品中铂族元素的消解、测定方法以及干扰处理方法,总结了多国测定结果并对结果进行了综合评述.     

Determination of rhodium: Since the origins until today Spectrophotometric methods

Anthropogenic emission of platinum group elements (PGEs) from the abrasion of automotive catalytic converters into the environment has significantly increased. Dust emitted from the catalyst is causing pollution problems of these metals in the future. However, the concentration level of these PGEs is still very low in the nature. The choice of which determination method to use depends on the levels of rhodium, the nature of the sample matrix and the availability of the instrument. In recent years, the development of analytical methods for the determination of rhodium has increased. This review reports the developments in UV-vis absorption spectrometry applied to the determination of rhodium.     

Determination of Pt from coke samples by ICP-MS after microwave assisted digestion and microwave assisted cloud point extraction

Platinum in coke samples was determined by inductively coupled plasma mass spectrometry (ICP-MS) after microwave-assisted sample digestion and temperature controlled microwave assisted cloud point extraction (MW-CPE). Interferences due to hafnium (¹⁷⁹Hf¹⁶O) were successfully eliminated using MW-CPE with 2-MBT prior to the determination of platinum by ICP-MS. The validity of the method was studied by spike recovery tests and by analyzing certified reference material (BCR-723 street dust). The results obtained for platinum in the BCR-723 were generally in good agreement with the certified values. Furthermore, the preliminary platinum results obtained for coke sample by ICP-MS after MW-CPE were compared to those obtained by a reference method (NiS-Fire Assay preconcentration/Te coprecipitation and ICP-MS determination).     

On the determination of platinum group elements in environmental materials by inductively coupled plasma mass spectrometry and microwave digestion

The interferences from Cd, Cu, Hf, Pb, Sr, Zn, Zr and Y on the inductively coupled plasma quadrupole mass spectrometry (ICP-MS) determination of Pt, Pd, Rh, Ru and Ir in geological (Pt-ore SARM-7, abundance range for platinum metals 0.07-3.74 μg/g) and environmental samples (sediment JSd-2 abundance range for Pt and Pd 0.0167-0.021 μg/g; road dust and plant sample) are evaluated using model solutions, real samples and comparison to inductively coupled plasma atomic emission spectrometry (ICP-AES) results. Pt, Rh, Ru and Ir can be determined usually after introduction of corrections for the interference in all investigated materials though in sediments the direct determination of Pt might be a problem depending on the actual Hf concentrations. The direct determination of Pd (after microwave-assisted acid digestion) is possible in ores using all investigated isotopes (, , ), in plants using and correction for the interferences of Zr, Mo and Cd, and not possible in sediments and road dust. Therefore, we developed a procedure for isolation of Pd using its diethyl-dithio-carabamate (DDTC) complex. The detection limits for Pt, Pd and Ir are 0.015 ng/g, and for Ru and Rh 0.03 ng/g.     

Analytical Determination and Bio-Monitoring of Platinum Group Elements in Roadside Grass Using Microwave Assisted Digestion and Electrothermal Atomic Absorption Spectrometry

The analytical conditions that enable the determination of traffic related platinum group elements (PGEs) in roadside grass using microwave digestion and electrothermal atomic absorption spectrometry were evaluated as an alternative to the biomonitoring of traffic related PGEs and Pb levels in urban areas. To optimize the analytical conditions and account for matrix effects that could import error in the analysis, method optimization was based on matrix simulation through analyte recovery from spiked unpolluted samples against a matrix blank. A mixture of nitric and hydrofluoric acid under progressively increasing microwave irradiation was optimized to afford the quantitative extraction of platinum group elements from plant matrix. Due to the low levels of platinum group elements in real samples, preconcentration was accomplished using sample evaporation followed by dissolution in dilute nitric acid prior to deliverance to the atomic detector. Quantitation limits below 1 ng g^?1 for Pd and Rh and lower than 2 ng g^?1 for Pt, were accomplished, enabling the monitoring of platinum group elements bioaccumulation in roadside grass with satisfactory recoveries, as determined from the analysis of spiked samples. The results from method application in an annual monitoring survey of PGEs and Pb levels in urban flora and other roadside media are presented and discussed.     

Comparison of open digestion methods and selection of internal standards for the determination of Rh,Pd and Pt in plant samples by ICP-MS

An analytical procedure for the reliable determination of Pd, Pt and Rh in plant samples by inductively coupled plasma-mass spectrometry (ICP-MS) was developed. An ultrasonic nebulizer (USN) was used for sample introduction to improve sensitivity. Under various synthetic plant sample matrix compositions, it was established experimentally that moderate amounts (0.2–2%) of dissolved solids decreased the analyte signals significantly. Internal standardisation with In (for Pd and Rh) and Ir (for Pt) proved to be essential for obtaining correct results. Five open digestion approaches, used for converting solid plant samples to aqueous solution, were also tested for the purpose, namely dry-ashing, dry-ashing followed by HF attack, wet digestion with H₂O₂–HNO₃, wet digestion followed by HF attack and aqua regia digestion. Recovery tests in two spiked plant materials showed that only wet digestions must be used. With these ways, all PGEs could be reliably quantified by USN-ICP-MS without applying a separation or preconcentration step with a good precision (below 10% RSD). The aqua regia procedure was applied to the determination of PGEs in various plant matrices collected along a highway. Results showed that mosses were probably the best choice of samples to monitor the bioaccumulation of PGEs in time.     

Determination of platinum group elements and gold in geological materials: a review of recent magnetic sector and laser ablation applications

Inductively coupled plasma mass spectrometry (ICP-MS) has been used extensively as a rapid and accurate instrumental technique for determinations of platinum group elements (PGEs) and gold. Methods based upon ICP-MS have been important in analyses of many types of samples, and especially of geological materials containing very low concentrations of these elements. Recently, analytical methods based upon ICP-MS have been improved and widened in scope by the introduction of new magnetic sector (or high resolution) spectrometers, and laser ablation (LA) sampling. Detection limits attainable for PGEs and Au using magnetic sector instruments in analytical procedures cited here are as low as 0.01-0.02 pg g⁻¹; instruments have a dynamic range of up to nine orders of magnitude. This review describes applications of the techniques to analyses of PGEs and gold in minerals, nodules, meteorites, ice, sediments, airborne particulates and reference materials. The period covered is 1998-2002.     

Elimination of interferences in determination of platinum and palladium in environmental samples by inductively coupled plasma mass spectrometry

Various approaches were evaluated in order to eliminate the spectral interferences noted when Pt and Pd has to be determined in environmental dust samples by ICP-MS. The chemical separation of Pt and Pd from the matrix components on ion-exchange resins was applied. The performance of cation-exchange resins (Dowex 50 WX-8, Dowex 50 WX-2, Dowex HCR-S, Varion KS, Cellex-P) for the separation of interfering ions was then examined. It was found that Dowex 50 WX-8 shows best performance. The effects of mass, mesh number of resin and concentration of Cl⁻ ions on matrix separation were also studied. Another approach was to use the anion-exchange sorbent Cellex-T, which allows almost total retention of both analytes followed by their elution with 0.1 mol L⁻¹ thiourea in 1 mol L⁻¹ HCl. This procedure however can be used only for platinum determination by ICP-MS. The accuracy of proposed procedures was confirmed by the analysis of certified material BCR-723, and then it was used for determination Pt and Pd in samples of road dust.     

碳增强效应与内标选择-电感耦合等离子体质谱法测定高温合金中痕量碲

采用电感耦合等离子体质谱法直接测定镍基高温合金中痕量碲,不需要对基体进行萃取等复杂的分离手段,通过对碳增敏剂与内标选择等因素进行优化,同时降低了多原子离子的干扰。依照质量数和ICP指数的角度选择铑为内标,校正了测定过程中信号的漂移,乙醇作为增敏剂,确定了在线的内标和增敏剂的加入模式。方法提高了痕量碲的检测灵敏度,测定下限达到0.00004% (0.4 ppm)。为了验证该方法的有效性,对高温合金的标准物质(GBW01619-01620)进行了分析,测定值与认定值吻合良好,其中结果精密度试验RSD(n=3)<10%。     

Recent advances in the determination of the platinum group elements and gold

Accurate determinations of the platinum group elements (PGEs) and gold, known as the precious metals, have always been difficult tasks. The metals are often present at trace levels in sample types of complex composition. This situation has improved recently due to developments of instrumental methods and their applications to analyses of the precious metals in a variety of matrices. Attention has been given to determinations of traces of precious metals in biological, clinical and environmental samples. Foremost in importance is inductively coupled plasma mass spectrometry (ICP-MS) which has provided a sensitive means of simultaneous determination of traces of PGEs and gold. Important extensions and improvements in atomic absorption spectrometry (AAS), nuclear and electrochemical methods have been reported also. More research on sample treatments, especially fire assays, applied to PGEs has been carried out. Chlorination has proven to be a viable alternative to fire assays for preconcentration of PGEs and gold in analyses of geological materials. In addition, the recent availability of some additional reference materials will be of great assistance in research work on precious metals.     

Ion chromatography with inductively coupled plasma mass spectrometry,a powerful analytical tool for complex matrices estimation of Pt and Pd in environmental samples

A new method for palladium and platinum direct determination in environmental samples is proposed by coupling ion chromatography with quadrupole inductively coupled plasma MS. In order to optimise Pd and Pt separation and to minimise interference from matrix in real samples, several anionic and cationic stationary phases have been compared at different mobile phase compositions. In particular, the effect of acidity and of the addition of oxalic acid to the eluent on separation and detection performance has been studied, and the anion-exchange column AG11 turned out to be more suitable. After chromatographic and mass spectrometer parameter optimisation, several potential interferences and the main quality parameters of the method, according to the Eurachem-CITAC recommendations, were evaluated: the detection limit for Pt was 5 ng l(-1) while the value for Pd was 230 ng l(-1). The method was successfully employed in the determination of platinum group elements in urban road dust and atmospheric particulates and the complete absence of matrix spectral interferences was demonstrated.     

Internal correction of hafnium oxide spectral interferences and mass bias in the determination of platinum in environmental samples using isotope dilution analysis

A method has been developed for the accurate determination of platinum by isotope dilution analysis, using enriched ¹⁹⁴Pt, in environmental samples containing comparatively high levels of hafnium without any chemical separation. The method is based on the computation of the contribution of hafnium oxide as an independent factor in the observed isotope pattern of platinum in the spiked sample. Under these conditions, the ratio of molar fractions between natural abundance and isotopically enriched platinum was independent of the amount of hafnium present in the sample. Additionally, mass bias was corrected by an internal procedure in which the regression variance was minimised. This was possible as the mass bias factor for hafnium oxide was very close to that of platinum. The final procedure required the measurement of three platinum isotope ratios (192/194, 195/194 and 196/194) to calculate the concentration of platinum in the sample. The methodology has been validated using the reference material “BCR-723 road dust” and has been applied to different environmental matrices (road dust, air particles, bulk wet deposition and epiphytic lichens) collected in the Aspe Valley (Pyrenees Mountains). A full uncertainty budget, using Kragten’s spreadsheet method, showed that the total uncertainty was limited only by the uncertainty in the measured isotope ratios and not by the uncertainties of the isotopic composition of platinum and hafnium. Figure Simultaneous correction of hafnium oxide spectral interferences and mass bias in the determination of platinum in environmental samples using isotope dilution analysis Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.

小锍试金铂族元素富集方法

研究了降低捕集剂镍用量的小铳试金铂族元素富集方法。通过测试,比较了重约０．５ｇ、２．５ｇ、２５ｇ试金扣的酸溶时间、铂族元素（ＰＧＥ）空白值。研究证明２．５ｇ试金扣既克服了常规试金扣和微型试金扣的缺点,又保留了它们的优点。经标准物质难证,铂族元素测定值与真值相符合。     

Simultaneous determination of palladium, platinum, rhodium and gold by on-line solid phase extraction and high performance liquid chromatography with 5-(2-hydroxy-5-nitrophenylazo)thiorhodanine as pre-column derivatization regents

In this paper, 5-(2-hydroxy-5-nitrophenylazo)thiorhodanine (HNATR) was synthesized. A new method for the simultaneous determination of palladium, platinum, rhodium and gold ions as metal-HNATR chelates was developed using a rapid analysis column high performance liquid chromatography equipped with on-line solid phase extraction technique. The samples (Water, human urine, geological samples and soil) were digested by microwave acid-digestion. The palladium, platinum, rhodium and gold ions in the digested samples were pre-column derivatized with HNATR to form colored chelates. The Pd-HNATR, Pt-HNATR, Rh-HNATR and Au-HNATR chelates can be absorbed onto the front of the enrichment column when they were injected into the injector and sent to the enrichment column [Zorbax Stable Bound, 10 mm x 4.6 mm, 1.8 microm] with a buffer solution of 0.05 mol L(-1) phosphoric acid as mobile phase. After the enrichment had finished, by switching the six ports switching valve, the retained chelates were back-flushed by mobile phase and travelling towards the analytical column. These chelates separation on the analytical column [Zorbax Stable Bound, 10 mm x 4.6 mm, 1.8 microm] was satisfactory with 72% acetonitrile (containing 0.05 mol L(-1) of phosphoric acid and 0.1% of Triton X-100) as mobile phase. The palladium, platinum, rhodium and gold chelates were separated completely within 2.5 min. Compared to the routine chromatographic method, more then 80% of separation time was shortened. By on-line solid phase extraction system, a large volume of sample (10 mL) can be injected, and the sensitivity of the method was greatly improved. The detection limits (S/N=3, the sample injection volume is 10 mL) of palladium, platinum, rhodium and gold in the original samples reaches 1.4, 1.8, 2.0 and 1.2 ng L(-1), respectively. The relative standard deviations for five replicate samples were 2.4-3.6%. The standard recoveries were 88-95%. This method was applied to the determination of palladium, platinum, rhodium and gold in human urine, water and geological samples with good results.     

Separation preconcentration method for platinum and rhodium from environmental samples using a chelating resin

A method of determining trace levels of platinum and rhodium in different samples was investigated. The method involves separation and preconcentration of the platinum and rhodium from the matrix by flow injection (FI) on-line coupled with electrothermal atomic absorption spectrometry (ETAAS) with Zeeman effect background correction. Platinum and rhodium were adsorbed on a microcolumn packed with 1,5-bis(di-2-pyridyl)methylene thiocarbohydrazide immobilized on silica gel (DPTH-gel). The sorbed metals were directly eluted with nitric acid into the graphite furnace and determined by AAS.     

Determination of rhodium: Since the origins until today Atomic absorption spectrometry

Rhodium is present at about 0.001 ppm in the earths crust. Rhodium metal is known for its stability in corrosive environments, physical beauty and unique physical and chemical properties. Recent interest in the medical and industrial significance of platinum and to a lesser extent palladium and rhodium has been accompanied by an increasing interest in their determination at low levels.Platinum group elements (PGEs: Pt, Pd, Rh, Ru, Ir and Os) play a decisive role in the performance of catalytic converters, world-wide applied in vehicles and in some household utensils, to reduce the emission of gaseous pollutants, such as carbon monoxide, nitrogen oxides and hydrocarbons. Since then, approximately 73% of the world production of rhodium is consumed in the production of autocatalyst. However, the hot exhaust gases flowing through the converter cause abrasion of these units, leading to the emission of these elements to the environment. The concentration level of rhodium (also platinum and palladium) is still very low in the nature; accordingly, their determination in environmental samples specially appears to be a challenging task for analytical chemists. In recent years, the development of analytical methods for the determination of rhodium has increased.The aim of the present review is to evaluate the utility of atomic absorption spectrometry, applied for the quantification of rhodium in different materials, such as environmental, biological, metallurgical and geological samples.     

On the re-assessment of the optimum conditions for the determination of platinum, palladium and rhodium in environmental samples by electrothermal atomic absorption spectrometry and microwave digestion

The experimental conditions for the determination of platinum, palladium and rhodium by graphite furnace atomic absorption spectrometry (GFAAS) are re-assessed. A certified material (BCR-723) was used as a working sample and analyzed using various extraction and atomization procedures in order to find the optimal experimental conditions that enable the quantitative and reproducible detection of platinum, palladium and rhodium in environmental matrices. Evidently, literature observations regarding the atomization conditions were proven fairly adequate. However, the provision of the optimum extraction conditions revealed several parameters that lie behind the reported uncertainties. The appropriate combination between extraction conditions and atomization programs afforded a considerable improvement in the recoveries and analytical features of platinum, palladium and rhodium determination with GFAAS. Cross-examination of the analytical data with various CRMs (certified reference materials) was used to validate the robustness of the method in heterogeneous matrices bearing different element levels. Under the optimum experimental conditions the method permits the determination at concentrations as low as (LOD(3S/N)) 1.9 ng g(-1), 0.45 ng g(-1) and 0.6 ng g(-1) for Pt, Pd and Rh, respectively affording recoveries in the range of 93-101%. The method was successfully applied to the assessment of Pt, Pd and Rh accumulation in real road dust and soil samples in Greece.