Metallacyclopentadienes and related heterocycles via 1,1‐organoboration of alkyn‐1‐ylmetal compounds

Metallacyclopentadienes (metalloles) containing M = Si, Ge, Sn, Pb, Ti, Pt can be prepared by 1,1‐organoboration of alkyn‐1‐ylmetal compounds L_nM CC R¹(R¹ = H, alkyl, aryl, silyl, etc; L depends on M, and can be hydrogen, alkyl, aryl, Cl, Br, amino groups, a chelating diphosphane, and one or more L can be again alkynyl groups). These reactions proceed via activation of the M C bond(s) by an electron‐deficient triorganoborane BR₃ (R = alkyl, aryl; non‐cyclic, monocyclic, bicyclic, and tricyclic boranes), at first intermolecular and then intramolecular. In the course of these reactions, the M C bonds are cleaved, zwitterionic alkynylborate‐like intermediates are formed, in which the metal‐containing fragments are coordinated side‐on to the CC bonds. In most cases, the 1,1‐organoboration reactions tolerate various functional groups at the alkyne as well as at the metal. The characterization of intermediates and final products by X‐ray structural analysis and by multinuclear magnetic resonance spectroscopy (NMR) is documented and described. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:188–208, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20222     

Cooperative GeN Bond Activation in Aluminium‐Functionalised Aminogermanes and Spontaneous Imine Elimination via an Intermediate Germyl Cation

Hydrometallation of iPr₂N?Ge(CMe₃)(C?C?CMe₃)₂ with H?M(CMe₃)₂ (M=Al, Ga) affords alkenyl–alkynylgermanes in which the Lewis‐acidic metal atoms are not coordinated by the amino N atoms but by the α‐C atoms of the ethynyl groups. These interactions result in a lengthening of the Ge?C bonds by approximately 10 pm and a comparably strong deviation of the Ge?C?C angle from linearity (154.3(1)°). This unusual behaviour may be caused by steric shielding of the N atoms. Coordination of the metal atoms by the amino groups is observed upon hydrometallation of Et₂N?Ge(C₆H₅)(C?C?CMe₃)₂, bearing a smaller NR₂ group. Strong M?N interactions lead to a lengthening of the Ge?N bonds by 10 to 15 pm and a strong deviation of the M atoms from the MC₃ plane by 52 and 47 pm, for Al and Ga, respectively. Dual hydrometallation is achieved only with HAl(CMe₃)₂. In the product, there is a strong Al?N bond with converging Al?N and Ge?N distances (208 vs. 200 pm) and an interaction of the second Al atom to the phenyl group. Addition of chloride anions terminates the latter interaction while the activated Ge?N bond undergoes an unprecedented elimination of EtN?C(H)Me at room temperature, leading to a germane with a Ge?H bond. State‐of‐the‐art DFT calculations reveal that the unique mechanism comprises the transfer of the amino group from Ge to Al to yield an intermediate germyl cation as a strong Lewis acid, which induces β‐hydride elimination, with chloride binding being crucial for providing the thermodynamic driving force.     

Umsetzungen der Dielementverbindungen R2E–ER2 [E = Ga,In; R = CH(SiMe3)2] mit Lithium‐phenylethinid – Bildung von Addukten unter Erhalt der E–E‐Bindungen

Reactions of the Dielement Compounds R₂E–ER₂ [E = Ga, In; R = CH(SiMe₃)₂] with Lithium Phenylethynide – Formation of Adducts by Retention of the E–E Bonds Lithium phenylethynide reacted with the dielement compounds tetrakis[bis(trimethylsilyl)methyl]digallane(4) ( 2 ) and diindane(4) ( 3 ) as a Lewis‐base and gave by the addition of one ethynido ligand to one of the Lewis‐acidic central atoms the anionic adducts 4 and 5 with intact Ga–Ga and In–In single bonds. Thus, compounds were formed, in which tricoordinated, coordinatively unsaturated Ga or In atoms are neighbored to tetracoordinated, coordinatively saturated ones. The E–E bonds [255.83 pm in 4 (Ga–Ga) and 285.24 pm in 5 (In–In)] are only slightly lengthened compared to those of the starting compounds 2 and 3 . A dynamic behavior with a fast change of the position of the ethynido ligand was observed for both compounds in solution at room temperature.     

Synthesis and structure of novel spirosilanes. Combination of 1,2‐hydroboration and 1,1‐organoboration

The reaction of tetra(alkyn‐1‐yl)silanes Si(C?C‐R¹)₄ 1 [R¹ = ^tBu ( a ), Ph ( b ), C₆H₄‐4‐Me ( c )] with 9‐borabicyclo[3.3.1]nonane (9‐BBN) in a 1:2 ratio affords the spirosilane derivatives 5a – c as a result of twofold intermolecular 1,2‐hydroboration, followed by twofold intramolecular 1,1‐organoboration. Intermediates 3a–c , in which two alkenyl‐ and two alkyn‐1‐yl groups are linked to silicon, were identified by NMR spectroscopy. The molecular structure of the spiro compound 5c was determined by X‐ray analysis, and the solution‐state structures of products and intermediates follow conclusively from the consistent NMR spectroscopic data sets (¹H, ¹¹B, ¹³C and ²⁹Si NMR). Copyright © 2008 John Wiley & Sons, Ltd.     

catena‐Poly[bis[(η2‐1‐allyl‐3‐aminopyridinium)copper(I)]‐di‐μ‐chloro‐copper(I)‐di‐μ‐chloro‐copper(I)‐di‐μ‐chloro]

Crystals of the title π‐complex, [Cu₄Cl₆(C₈H₁₁N₂)₂]_n, were obtained by means of alternating‐current electrochemical synthesis. The structure consists of infinite copper–chlorine chains to which 1‐allyl‐3‐amino­pyridinium moieties are attached via a η² Cu—(C=C) interaction. The two independent Cu atoms have distinct coordination environments. One is three‐coordinate, surrounded by two chloro ligands and the olefinic bond, whereas the second copper center is surrounded by a tetrahedral arrangement of four Cl atoms. The lower basicity of 3‐amino­pyridine as compared with 2‐ and 4‐amino­pyridine lowers the capacity of the organic ligand for donating to N—H⋯Cl hydrogen bonds and results in the formation of a large inorganic fragment.     

Preparation of Dithienylphospholes by 1,1‐Carboboration

In this study the scope of the 1,1‐carboboration reaction was extended to the preparation of mixed heterole‐based conjugated π‐systems. Two arylbis(alkynyl)phosphane starting materials 2 were synthesized bearing two thiophene isomers at the alkyne units and the bulky tipp‐substituent (tipp=2,4,6‐triisopropylphenyl) at the phosphorous atom. The bis(thienylethynyl)phosphanes 2 were converted into the corresponding 2,5‐thienyl‐substituted 3‐borylphospholes 4 in a double 1,1‐carboboration reaction sequence employing the strongly electrophilic B(C₆F₅)₃ reagent under mild reaction conditions. Subsequent Suzuki–Miyaura type cross‐coupling yielded the corresponding 3‐phenylphospholes 7 in a one‐pot procedure from phosphanes 2 in high yields. Phospholes 7 were converted into the respective phosphole oxides 8 . A photophysical characterization of derivatives 7 and 8 was carried out. The results presented here demonstrate the suitability of the 1,1‐carboboration reaction for the preparation of phosphole‐/thiophene‐based, light‐emitting systems.     

Exploiting Electrostatics To Generate Unsaturation: Oxidative GeE Bond Formation Using a Non π‐Donor Stabilized [R(L)Ge:]+ Cation

The two‐coordinate germanium cation [(IDipp){(Me₃Si)₂CH}Ge:]⁺ has been synthesized, which lacks π‐donor stabilization of the metal center and consequently has a very small HOMO–LUMO gap (187 kJ mol^?1). It undergoes a variety of facile oxidative bond‐forming reactions, most notably allowing access to the first examples of Group 14 metal cations containing M?E multiple bonds (E=C, N). The use of an electrostatic (rather than purely steric) strategy to discourage aggregation means that less bulky systems (for example, containing a primary alkylidene fragment, ?CHR) are accessible.     

1‐Silacyclopent‐2‐enes and 1‐silacyclohex‐2‐enes bearing functionally substituted silyl groups in 2‐positions. Novel electron‐deficient Si?H?B bridges

The reactions of alkyn‐1‐yl(vinyl)silanes R₂Si[C?C‐Si(H)Me₂]CH?CH₂ [R = Me (1a), Ph (1b)], Me₂Si[C?C‐Si(Br)Me₂]CH?CH₂ (2a), and of alkyn‐1‐yl(allyl)silanes R₂Si[C?C‐Si(H)Me₂]CH₂CH?CH₂ (R = Me (3a), R = Ph (3b)] with 9‐borabicyclo[3.3.1]nonane in a 1:1 ratio afford in high yield the 1‐silacyclopent‐2‐ene derivatives 4a, b and 5a, and the 1‐silacyclohex‐2‐ene derivatives 6a, b, respectively, all of which bear a functionally substituted silyl group in 2‐position and the boryl group in 3‐position. This is the result of selective intermolecular 1,2‐hydroboration of the vinyl or allyl group, followed by intramolecular 1,1‐organoboration of the alkynyl group. In the cases of 4a, b, potential electron‐deficient Si? H? B bridges are absent or extremely weak, whereas in 6a,b the existence of Si? H? B bridges is evident from the NMR spectroscopic data (¹H, ¹¹B, ¹³C and ²⁹Si NMR). The molecular structure of 4b was determined by X‐ray analysis. Copyright © 2005 John Wiley & Sons, Ltd.     

Hydroalumination of a Chlorotrialkynylsilane: Spontaneous Stepwise 1,3‐Dyotropic Rearrangement via an Intermediate Silyl Cation

A new functionalised alkynylsilane, Cl‐Si(C?C‐CMe₃)₃ ( 3 ), was obtained by a facile multistep synthesis. Treatment of 3 with equimolar quantities of the hydrides H‐M(CMe₃)₂ (M=Al, Ga) gave the mixed alkenyl‐di(alkynyl)silanes, in which the chlorine atom adopts a bridging position between the aluminium and silicon atoms. Dual hydrogallation of 3 resulted in the formation of a di(alkenyl)‐alkynylsilane containing two gallium atoms, one of which is coordinated to the chlorine atom, and the second is bonded to the α‐carbon atom of the remaining alkynyl group. A tert‐butylsilane was unexpectedly formed by a unique 1,3‐dyotropic chlorine–tert‐butyl exchange for the corresponding dialuminium compound. One aluminium atom is bonded to a tert‐butyl group, a terminal chlorine atom and the α‐carbon atom of the ethynyl moiety; the second is coordinatively unsaturated, with two terminal tert‐butyl substituents. High‐level quantum‐chemical calculations favour a stepwise dyotropic rearrangement with an intermediate cationic silicon species over a simultaneous tert‐butyl–chlorine migration via a five‐coordinate silicon atom in the transition state.     

Functional carbo‐Butadienes: Nonaromatic Conjugation Effects through a 14‐Carbon, 24‐π‐Electron Backbone

A systematic study of carbo‐butadiene motifs not embedded in an aromatic carbo‐benzene ring is described. Dibutatrienylacetylene (DBA) targets R¹?C(R)?C?C?C(Ph)?C≡C?C(Ph)?C?C?C(R)?R² are devised, in which R is C≡CSiiPr₃ and R¹ and R² are R, H, or 4‐X‐C₆H₄, with the latter including three known representatives (X: H, NMe₂, or NH₂). The synthesis method is based on the SnCl₂‐mediated reduction of pentaynediols prepared by early or late divergent strategies; the latter allows access to a OMe–NO₂ push–pull diaryl‐DBA. If R¹ and R² are H, an over‐reduced dialkynylbutatriene (DAB) with two allenyl caps was isolated instead of the unsubstituted DBA. If R¹=R²=R, the tetraalkynyl‐DBA target was obtained, along with an over‐reduced DBA product with a 12‐membered 1,2‐alkylidene‐1H₂,2H₂‐carbo‐cyclobutadiene ring. X‐ray crystallography shows that all of the acyclic DBAs adopt a planar trans–transoid–trans configuration. The maximum UV/Vis absorption wavelength is found to vary consistently with the overall π‐conjugation extent and, more intriguingly, with the π‐donor character of the aryl X substituents, which varies consistently with the first (reversible) reduction potential and first (irreversible) oxidation peak, as determined by voltammetry.     

Two Different Structural Motifs Observed for Dimeric Dialkylaluminum and Dialkylgallium Alkynides [R2E‐C≡C‐C6H5]2

The dialkylaluminum and dialkylgallium alkynides [R₂E‐C≡C‐R′]₂ (R = Me, CMe₃; E = Al, Ga; R′ = Ph) containing C≡C triple bonds attached to their central aluminum or gallium atoms are easily obtained by the reactions of dialkylelement chlorides with lithium alkynides or by treatment of the corresponding alkyne R‐C≡C‐H with dialkylaluminum or dialkylgallium hydrides. The first reaction is favored by the precipitation of LiCl, the second one by the formation of elemental hydrogen. All products form dimers in which the carbanionic carbon atoms of the alkynido groups adopt bridging positions, but, interestingly, different types of molecular structures were observed depending on the steric demand of the substituents terminally attached to the aluminum or gallium atoms. The small methyl substituents gave structures in which the aluminum or gallium atoms seemed to be side‐on coordinated by the C≡C triple bonds of almost linear E‐C≡C groups. In contrast, the more bulky tert‐butyl groups forced an arrangement in which the C≡C triple bonds were perpendicular to the E‐E axis of the molecules. Different bonding modes result, which were analyzed by quantum‐chemical calculations.     

A one‐dimensional zinc(II) coordination polymer incorporating [1,1′‐biphenyl]‐4,4′‐dicarboxylate and N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands

In the title compound, catena‐poly[[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[1,1′‐biphenyl]‐4,4′‐dicarboxylato‐[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]], [Zn₂(C₁₄H₈O₄)Cl₂(C₂₆H₂₂N₄O₂)₃]_n, the Zn^II centre is four‐coordinate and approximately tetrahedral, bonding to one carboxylate O atom from a bidentate bridging dianionic [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand, to two pyridine N atoms from two N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands and to one chloride ligand. The pyridyl ligands exhibit bidentate bridging and monodentate terminal coordination modes. The bidentate bridging pyridyl ligand and the bridging [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand both lie on special positions, with inversion centres at the mid‐points of their central C—C bonds. These bridging groups link the Zn^II centres into a one‐dimensional tape structure that propagates along the crystallographic b direction. The tapes are interlinked into a two‐dimensional layer in the ab plane through N—H...O hydrogen bonds between the monodentate ligands. In addition, the thermal stability and solid‐state photoluminescence properties of the title compound are reported.     

Ga2Br2R2 und Ga3I2R3 [R = C(SiMe3)3] — zwei neue elementorganische Galliumsubhalogenide mit einer bzw. zwei Ga‐Ga‐Bindungen

Ga₂Br₂R₂ and Ga₃I₂R₃ [R = C(SiMe₃)₃] — Two New Organoelement Subhalides of Gallium Containing One or Two Ga‐Ga Single Bonds The oxidation of the tetrahedral tetragallium cluster Ga₄[C(SiMe₃)₃]₄ ( 1 ) with elemental bromine in the presence of AlBr₃ yielded the corresponding gallium subhalide Ga₂Br₂R₂ [ 4 , R = C(SiMe₃)₃], which remains monomer even in the solid state and in which the Ga^II atoms are connected by a short Ga‐Ga single bond [243.2(2) pm]. The analogous diiodide Ga₂I₂R₂ ( 3 ), which was obtained on a similar route by our group only recently, did not react with lithium tert‐butanolate by substitution as originally expected. Instead, partial disproportionation occurred with the formation of the trigallium diiodide Ga₃I₂R₃ ( 6 ), in which three Ga atoms are connected by two Ga‐Ga single bonds (255.1 pm on average). Both terminal Ga atoms have a coordination number of four owing to the bridging function of both iodine atoms, while the inner one which has an oxidation number of +1 remains coordinatively unsaturated. An average oxidation state of 1.66 resulted for all atoms of the chain. The Ga^III compound {[GaI(R)(OCMe₃)(OH)]Li}₂ ( 7 ) was isolated as the second product of the disproportionation. It is a dimer in the solid state via Li‐O bridges and shows a hindered rotation of its tert‐butyl group.     

Synthesis of 4‐silaspiro[3.4]octa‐1,5‐diene derivatives: hybrid spiro compounds

Trialkynyl(vinyl)silanes CH₂?CH? Si(C?C? R)₃ (R = Bu, Ph, p‐tolyl) were prepared and treated with 9‐borabicyclo[3.3.1]nonane (9‐BBN). Consecutive 1,2‐hydroboration and intramolecular 1,1‐carboboration reactions (each requires different reaction conditions) were studied. 1,2‐Hydroboration of the Si? vinyl group takes place at ambient temperature (23°C in tetrahydrofuran), followed by intramolecular 1,1‐vinylboration to give 1‐silacyclopent‐2‐ene derivatives, bearing still two alkynyl functions at the silicon atom. Further treatment with a second equivalent of 9‐BBN affords 1‐alkenyl‐1‐(alkynyl)‐1‐silacyclopent‐2‐ene derivatives. These undergo intramolecular 1,1‐vinylboration to give 4‐silaspiro[3.4]octa‐1,5‐dienes bearing the boryl groups at 2 and 6 positions. Protodeborylation of all new compounds (intermediates and final products) using acetic acid in slight excess afforded corresponding silanes including spirosilanes. All compounds were characterized using multinuclear NMR spectroscopy (¹H, ¹¹B, ¹³C, ²⁹Si) in solution state. Solid‐state structures for one of the trialkynyl(vinyl)silanes (R = p‐tolyl) and one of the 1‐silacyclopent‐2‐ene derivatives (R = Ph) were confirmed using X‐ray diffraction. Copyright © 2015 John Wiley & Sons, Ltd.     

1,1′‐Diethyl‐4,4′‐bipyridine‐1,1′‐diium bis(1,1,3,3‐tetracyano‐2‐ethoxypropenide): multiple C—H...N hydrogen bonds form a complex sheet structure

In the title salt, C₁₄H₁₈N₂²⁺·2C₉H₅N₄O⁻, the 1,1′‐diethyl‐4,4′‐bipyridine‐1,1′‐diium dication lies across a centre of inversion in the space group P2₁/c. In the 1,1,3,3‐tetracyano‐2‐ethoxypropenide anion, the two independent –C(CN)₂ units are rotated, in conrotatory fashion, out of the plane of the central propenide unit, making dihedral angles with the central unit of 16.0 (2) and 23.0 (2)°. The ionic components are linked by C—H...N hydrogen bonds to form a complex sheet structure, within which each cation acts as a sixfold donor of hydrogen bonds and each anion acts as a threefold acceptor of hydrogen bonds.     

Untersuchungen zur Carbeninsertion in Al–Al-, Ga–Ga- und In–In-Bindungen

Investigations on the Insertion of Carbenes into Al–Al, Ga–Ga, and In–In Bonds Tetrakis[bis(trimethylsilyl)methyl]dialane(4) 1 reacts with methylthiomethyl lithium LiCH₂SMe by the formation of lithium thiomethanolate LiSMe and the insertion of the remaining carbene CH₂ into its Al–Al single bond. A chelating Lewis acid is formed exhibiting a central R₂Al–CH₂–AlR₂ group with two coordinatively unsaturated Al atoms, which coordinate the thiomethanolate anion by Al–S bonds. The product (μ-methylene)(μ-thiomethanolato)bis{bis[bis(trimethylsilyl)methyl]aluminate} ( 4 ) was characterized by a crystal structure determination and has a strongly folded Al₂CS heterocycle in the molecular core. In contrast, the corresponding compounds with Ga–Ga or In–In bonds show on treatment with methylthiomethyl lithium a fragmentation, and the carbene intermediate could not be detected in both isolated products, which were identified as [R₂E(CH₂SMe)₂][Li(TMEDA)] (E = Ga: 5 ; E = In: 6 ) and LiCH(SiMe₃)₂ probably formed by a metal exchange reaction.     

H/D isotope effect on charge‐inverted hydrogen‐bonded systems: Systematic classification of three different types in H3XH…YH3 (X = C,Si, or Ge,and Y = B,Al, or Ga) with multicomponent calculation

Three different H/D isotope effect in nine H₃XH(D)^…YH₃ (X = C, Si, or Ge, and Y = B, Al, or Ga) hydrogen‐bonded (HB) systems are classified using MP2 level of multicomponent molecular orbital method, which can take account of the nuclear quantum nature of proton and deuteron. First, in the case of H₃CH(D)^…YH₃ (Y = B, Al, or Ge) HB systems, the deuterium (D) substitution induces the usual H/D geometrical isotope effect such as the contraction of covalent R(C? H(D)) bonds and the elongation of intermolecular R(H(D)^…Y) and R(C^…Y) distances. Second, in the case of H₃XH(D)^…YH₃ (X = Si or Ge, and Y = Al or Ge) HB systems, where H atom is negatively charged called as charge‐inverted hydrogen‐bonded (CIHB) systems, the D substitution leads to the contraction of intermolecular R(H(D)^…Y) and R(X^…Y) distances. Finally, in the case of H₃XH(D)^…BH₃ (X = Si or Ge) HB systems, these intermolecular R(H(D)^…Y) and R(X^…Y) distances also contract with the D substitution, in which the origin of the contraction is not the same as that in CIHB systems. The H/D isotope effect on interaction energies and spatial distribution of nuclear wavefunctions are also analyzed. © 2015 Wiley Periodicals, Inc.     

N‐(X‐Chlorophenyl)‐4‐hydroxy‐2‐methyl‐2H‐1,2‐benzothiazine‐3‐carboxamide 1,1‐dioxide (with X = 2 and 4)

The structures of N‐(2‐chlorophenyl)‐4‐hydroxy‐2‐methyl‐2H‐1,2‐benzothiazine‐3‐carboxamide 1,1‐dioxide and N‐(4‐chlorophenyl)‐4‐hydroxy‐2‐methyl‐2H‐1,2‐benzothiazine‐3‐carboxamide 1,1‐dioxide, both C₁₆H₁₃ClN₂O₄S, are stabilized by extensive intramolecular hydrogen bonds. The 4‐chloro derivative forms dimeric pairs of molecules lying about inversion centres as a result of intermolecular N—H...O hydrogen bonds, forming 14‐membered rings representing an R₂²(14) motif; the 2‐chloro derivative is devoid of any such intermolecular hydrogen bonds. The heterocyclic thiazine rings in both structures adopt half‐chair conformations.     

Pyridine‐Enhanced Head‐to‐Tail Dimerization of Terminal Alkynes by a Rhodium–N‐Heterocyclic‐Carbene Catalyst

A general regioselective rhodium‐catalyzed head‐to‐tail dimerization of terminal alkynes is presented. The presence of a pyridine ligand (py) in a Rh–N‐heterocyclic‐carbene (NHC) catalytic system not only dramatically switches the chemoselectivity from alkyne cyclotrimerization to dimerization but also enhances the catalytic activity. Several intermediates have been detected in the catalytic process, including the π‐alkyne‐coordinated Rh^I species [RhCl(NHC)(η²‐HC?CCH₂Ph)(py)] ( 3 ) and [RhCl(NHC){η²‐C(tBu)?C(E)CH?CHtBu}(py)] ( 4 ) and the Rh^III–hydride–alkynyl species [RhClH{? C?CSi(Me)₃}(IPr)(py)₂] ( 5 ). Computational DFT studies reveal an operational mechanism consisting of sequential alkyne C? H oxidative addition, alkyne insertion, and reductive elimination. A 2,1‐hydrometalation of the alkyne is the more favorable pathway in accordance with a head‐to‐tail selectivity.     

A novel 4‐methylene‐3‐borahomoadamantane: 1,1‐organoboration of an alkyn‐1‐ylsilane using 1‐boraadamantane

1,1‐Dibromo‐2,2‐bis(trimethylsilylethynyl)ethene ( 2 ) reacts with two equivalents of 1‐boraadamantane ( 1 ) by 1,1‐organoboration of both trimethylsilylethynyl groups to give a triene 3 bearing two 4‐methylene‐3‐borahomoadamantane moieties in terminal positions. The triene was characterized by one‐ and two‐dimensional ¹H, ¹¹B, ¹³C and ²⁹Si NMR spectroscopy in solution and X‐ray structural analysis in the solid state. The planes of the C double bond are strongly twisted against each other as a result of the bulky substituents, and the surroundings of the boron atoms deviate from the ideal trigonal planar geometry owing to the tension in the tricyclic frameworks. Copyright © 2006 John Wiley & Sons, Ltd.