Convectional,sedimentation and drying dissipative patterns of colloidal crystals of poly(methyl methacrylate) spheres on a watch glass

Direct observation of the convectional dissipative patterns at room temperature was successful on a cover glass during the course of dryness of colloidal crystals of poly(methyl methacrylate) colloidal spheres. Formation processes of the convectional patterns of spoke-like lines were observed as a function of sphere size and also sphere concentration. During dryness of the suspensions, the brilliant iridescent colors changed beautifully. Macroscopic and microscopic drying patterns of the dried film were observed. Multiple broad ring-like patterns were observed especially at low sphere concentrations. The water evaporation accompanied with the convectional flow of water and the colloidal spheres played an important role for the dissipative structure formation.     

Convectional, sedimentation, and drying dissipative patterns of colloidal silica (183 nm in diameter) suspensions in a glass dish and a watch glass

Convectional, sedimentation, and drying dissipative structural patterns formed during the course of drying aqueous colloidal crystals of silica spheres (183 nm in diameter) have been studied in a glass dish and a watch glass. Spoke-like convectional patterns were observed in a watch glass. The broad ring sedimentation patterns formed especially in a glass dish within 30–40 min in suspension state by the convectional flow of water and colloidal spheres. The macroscopic broad ring drying patterns formed both in a glass dish and a watch glass. The ratio of the broad ring size in a glass dish against the initial size of suspension, i.e., inner diameter of the glass dish, d _f/d _i, in this work, were compared with previous work of other silica spheres having sizes of 305 and 560 nm and 1.2 μm in diameter. The d _f/d _i values in a glass dish increased as sphere concentration increased, but were rather insensitive to colloidal size. The d _f/d _i values on a watch glass also increased as sphere concentration increased, and further increased as sphere size decreased. Segregation effect by sphere size in a watch glass takes place by the balancing between the upward convectional flow of spheres in the lower layers of the liquid and the downward sedimentation of spheres. Colorful microscopic drying patterns formed both in a glass dish and a watch glass.     

Sedimentation and drying dissipative patterns of colloidal silica (560 nm in diameter) suspensions in a glass dish and a watch glass

The sedimentation and drying dissipative structural patterns formed during the course of drying colloidal silica spheres (CS550, 560 nm in diameter) in an aqueous suspension have been studied in a glass dish and a watch glass. Broad ring patterns were formed within 20 min in the suspension state by the convectional flow of the colloidal spheres and water. The sedimentary spheres always moved by the convectional flow of water, and the broad ring patterns became sharp with time. The sharpness of the broad rings was sensitive to the change in the room temperature and/or humidity. Colorful macroscopic structures were composed of the broad ring and wave-like patterns, and further colorful and beautiful microscopic fine patterns formed during the solidification processes based on the convectional and sedimentation structures. The drying patterns of the colloidal suspensions containing sodium chloride were different from the structures of CS550 or sodium chloride individuals, which support the synchronous cooperative interactions between the colloidal spheres and the salts.     

Sedimentation and drying dissipative patterns of colloidal silica (305 nm in diameter) suspensions in a glass dish and a watch glass

Sedimentation and drying dissipative structural patterns formed in the course of drying colloidal silica spheres (305 nm in diameter) in aqueous suspension have been studied in a glass dish and a watch glass. The broad ring sedimentation patterns formed within several tenth minutes in suspension state by the convectional flow of water and colloidal spheres. The sedimentary spheres always moved by the convectional flow of water, and the broad ring patterns became sharp with time. The width of the broad rings was sensitive to the change in the room temperature and/or humidity. In other words, the patterns became sharp or vague when the room parameters decreased or increased. Colorful macroscopic drying structures were composed of a broad ring and the wave-formed patterns. Iridescent colored fine patterns formed in the solidification processes on the bases of the sedimentation patterns. Beautiful drying patterns were observed for the suspension mixtures of CS300 and NaCl, and were different from the structures of CS300 or NaCl individuals, which support the synchronous cooperative interactions between the colloidal spheres and the salt.     

Sedimentation and drying dissipative structures of colloidal silica (1.2 μm in diameter) suspensions in a glass dish and a polystyrene dish

Sedimentation and drying dissipative structural patterns formed in the course of drying colloidal silica spheres (1.2 μm in diameter) in aqueous suspension have been studied in a glass dish and a polystyrene dish. The broad ring patterns are formed within a short time in suspension state by the convection flow of water and colloidal spheres. The broad ring patterns are not formed when a dish is covered with a cap, which demonstrates the important role of the convectional flow of silica spheres and water accompanied with the evaporation of water on the air-suspension interface. The sedimentary spheres always move by the convectional flow of water, and the broad ring patterns became sharp with time. Broad ring and microscopic fine structures are formed in the solidification processes on the bases of the convectional and sedimentation patterns. Drying patterns of the colloidal suspensions containing sodium chloride are star-like ones, which strongly supports the synchronous cooperative interactions between the salt and colloidal spheres.     

Sedimentation and drying dissipative structures of colloidal silica (1.2 μm in diameter) suspensions in a watch glass

Sedimentation and drying dissipative structural patterns formed in the course of drying aqueous suspensions of colloidal silica spheres (1.2 μm in diameter) were observed in the various sizes of watch glasses. The macroscopic broad ring patterns were formed on the inner inclined watch glass in suspension state within a short time after suspension was set. The important role of the convectional flow of water and colloidal spheres for the pattern formation is supported. The influence of sodium chloride was also studied. It was clarified that the sedimentary spheres move toward upper and outer edges along the inclined cell wall by the cell convection and hence the patterns are formed by the balancing between the outside movement and the downward sedimentation of the spheres. Beautiful microscopic drying patterns were also observed from the optical microscopy.     

Convectional, sedimentation, and drying dissipative structures of ethanol suspension of colloidal silica (110 nm in diameter) spheres

Convectional, sedimentation, and drying dissipative structural patterns formed in the course of drying ethanol suspensions of colloidal silica spheres (110 nm in diameter) were studied in a glass dish and a watch glass. Vigorous cell convectional flow was observed with the naked eye, and the patterns changed dynamically with time. Broad-ring-like sedimentation patterns were observed in the suspension state just before the suspension was dried up, and the principal macroscopic patterns of the drying patterns were also broad-ring, though the colorful and fine microscopic structures were observed from optical microscopy.     

Drying dissipative structures of colloidal crystals of silica spheres coated with polymer brushes of poly(carboxymethyl betaine)

Drying patterns of colloidal crystals of colloidal silica spheres coated with the brushes of zwitterionic poly(carboxymethyl betaine) (SiP-PCMB) and their parent silica spheres (SiP) were studied on a cover glass, a watch glass, and a Petri glass dish. Crystal structures kept the whole process of dryness of the suspensions of SiP-PCMB and SiP. Crystal structures of the dried films of SiP-PCMB were kept stable even when the initial suspensions contained 5 mM of sodium chloride, which is the important role of the excluded volume effects of the shells of the polymer brushes. On the other hand, crystal structures of SiP spheres in the dried films were much unstable and melted in the presence of 5 mM sodium chloride. In the suspension state, colloidal crystallization of SiP-PCMB took place stably by the contribution of the excluded volume effects besides the extended electrical double layers compared with that of SiP spheres, where only the double layer effect contributes to the crystallization. The fractal patterns of the complexation of SiP-PCMB or SiP spheres with sodium chloride were observed microscopically in the dried films. Several kinds of dissipative crystallization such as array and/or accumulation of the crystallites were observed, and the importance of the convectional and sedimentation processes during the course of dryness was demonstrated.     

Drying dissipative structures of the deionized aqueous suspensions of colloidal silica spheres ranging from 29 nm to 1 μm in diameter

Macroscopic and microscopic dissipative structural patterns formed in the course of drying a series of the colloidal silica spheres ranging from 29 nm to 1 m in diameter have been observed in the aqueous deionized suspension on a cover glass. The broad ring patterns of the hill accumulated with the silica spheres are formed around the outside edges in the macroscopic scale for all spheres examined. The spoke-like cracks are also observed in the macroscopic scale and their number decreases sharply as sphere size increases. The pattern area and the time for the dryness have been discussed as a function of sphere size and concentration. The convection flow of water accompanied with that of the silica spheres and interactions among the silica spheres and substrate are important for the macroscopic pattern formation. The microscopic fractal structures of the wave-like patterns and branched strings are formed. Their fractal dimensions are determined. Microscopic patterns form in the narrow range of sphere sizes and concentrations and are determined mainly by the electrostatic and polar interactions between the spheres and/or between the sphere and substrate in the course of solidification.     

Sedimentation and drying dissipative patterns of colloidal crystals of poly(methyl methacrylate) spheres in a glass dish

In a series of our studies on the dissipative structure formation, this work focused on the sedimentation and drying patterns of colloidal crystals of poly(methyl methacrylate) colloidal spheres with different sizes (100, 200, 300, and 1,000 nm in diameter) in a glass dish. During the course of dryness, the brilliant iridescent colors changed. Drying frontier grew from the central area of the cell toward the outside edge. Macroscopic and microscopic drying patterns of the resulting film from dried colloidal suspensions showed outer and inner broad rings. Size of the outer rings increased with increasing sphere concentration but did not altered sphere size, while these factors affected the inner ring size. These observations do not support the pinning effect proposed by Deegan et al.     

Drying dissipative patterns of colloidal crystals of silica spheres on a cover glass at the regulated temperature and humidity

Influences of temperature and humidity on the drying dissipative patterns of colloidal crystals of silica spheres (103 nm in diameter) were studied. The broad ring pattern, which is one of the typical macroscopic drying structures, became sharp as temperature rose and/or humidity decreased. Furthermore, number of the spoke-like cracks decreased as temperature and/or humidity increased. The water evaporation from a liquid surface to air and the convectional flow of water and colloidal spheres were important for the macroscopic pattern formation.     

Sedimentation and drying dissipative patterns of binary suspensions of colloidal silica spheres having different sizes

The sedimentation and drying dissipative structural patterns were formed during the course of drying binary mixtures among colloidal silica spheres of 183 nm, 305 nm, and 1.205 μm in diameter in aqueous suspension on a watch glass, a glass dish, and a cover glass, respectively. The broad ring-like sedimentation patterns were formed within several hours in suspension state for all the substrates used. Colorful macroscopic broad ring-like drying patterns were formed for the three substrates. In a watch glass, macroscopic drying patterns were composed of the outer and inner layers of small and large spheres, respectively. The two colored layers were ascribed to the Bragg diffractions of light by the dried colloidal crystals of the corresponding spheres. The width ratio of the layers changed in proportion to the mixing ratio of each spheres. In a glass dish, wave-like macroscopic drying patterns were observed in the intermediate areas between the outside edges of the broad ring and the inner wall of the cell. On a cover glass, the sphere mixing ratios were analyzed from the widths of the drying broad rings of the small spheres at the outside edge. High and distinct broad rings of small spheres and the low and vague broad one formed at the outer edges and in the inner area, respectively. Drying dissipative pattern was clarified to be one of the novel analysis techniques of colloidal size in binary colloidal mixtures.     

Dissipative structures formed in the course of drying the colloidal crystals of silica spheres on a cover glass

Macroscopic and microscopic dissipative structural patterns formed in the course of drying the deionized aqueous colloidal crystal suspensions of silica spheres (diameter: 103 nm) on a cover glass have been observed. Spoke-like and ring-like patterns are formed in the macroscopic scale; the former is the crack in the sphere film and the latter is the hill accumulated with spheres formed around the outside edge. The neighbored inter-spoke angle, thickness of the film, and other morphological parameters have been discussed as a function of sphere concentration, concentration of sodium chloride, and the inclined angle of the cover glass. Fractal patterns of the mud cracks are observed in the microscopic scale. Capillary forces between spheres at the air-liquid surface and the relative rates between the water flow at the drying front and the convection flow of spheres are important for the pattern formation. Electronic Publication     

Drying dissipative patterns of the colloidal crystals of silica spheres in an dc-electric field

Drying dissipative structural patterns of the colloidal crystals of silica spheres were studied under an dc-electric field. Platinum plate electrodes of anode and cathode were set on a cover glass. The broad hills accumulated with the spheres were observed at the outer edges of the dried film without and also with the electric fields. The column-like structures were formed by the electric flux, and movement of the spheres took place toward anode. The dried film kept colloidal crystal structure, where the nearest-neighbored spheres contact each other more compactly in the areas closer to the anode. Drying times needed for the complete dryness of the suspensions decreased as the strength of the electric field increased. Addition of sodium chloride to the suspensions retarded the movement of spheres toward the anode substantially.     

Sedimentation and drying dissipative structures of green tea

Sedimentation and drying dissipative patterns formed in the course of drying green tea (Ocha) have been studied in tea cup (Ochawan), glass dish, polystyrene dish, and watch glass. The broad-ring patterns are formed within several tens of minutes in suspension state by the convectional flow of water and colloidal particles of green tea (7 μm in mean size and 5 μm in its dispersion from the mean size). Formation of the broad-ring patterns is retarded when a tea cup is covered with a watch glass, which demonstrates the important role of the convectional flow of tea particles and water induced by the evaporation of water at the air-suspension interface under the gravity. The sedimentary particles are suspended above the substrate plate and always move by the convectional flow of water. The broad-ring patterns become sharp just before the solidification occurs. The broad rings are formed even in an inclined glass dish, though the rings are transformed slightly, which demonstrates the strong convectional flow of the particles. The drying broad rings and the microscopic fine structures are formed in the solidification processes on the bases of the convectional and sedimentation patterns in suspension state.     

Sedimentation and drying dissipative patterns of ternary mixtures of colloidal silica spheres having different sizes

The sedimentation and drying dissipative structural patterns were formed during the course of drying ternary mixtures of colloidal silica spheres of 183 nm, 305 nm, and 1.205 μm in diameter in aqueous suspension on a watch glass, a glass dish, and a cover glass. The patterns were observed by closed-up pictures, metallurgical optical microscopy, 3D profile microscopy, reflection spectroscopy and AFM images. The concentrations of the three spheres ranged from 0.0023 to 0.0128 keeping the same concentrations for each spheres. Broad ring-like sedimentation patterns were formed within a short time in suspension state especially in a glass dish. In a watch glass, colorful three layered ring-like drying patterns were observed and composed of the outer, middle and inner layers of small, medium, and large spheres, respectively. The three colored segregated layers were formed by the balancing between the outward convectional flow and the inward sedimentation of spheres. In a glass dish, wave-like macroscopic drying patterns were observed in the intermediate areas between the outside edge of the broad ring at the central area and the inner wall of the cell especially at low sphere concentrations. The size of the broad ring at the central area increased as sphere concentration increased. On a cover glass, size segregation also took place, i.e., small, medium, and large spheres located at the outer, medium, and central areas, though these segregations were not so complete compared with those on a watch glass.     

Colloidal crystallization of poly(n-butyl acrylate) spheres in deionized aqueous suspension and the melting during dryness

Colloidal crystallization of poly(n-butyl acrylate) spheres (ammonium persulfate-poly(n-butyl acrylate) (APS-PBA), 320?±?50 nm in diameter) was studied in deionized aqueous suspension. Coexistence of the crystal and distorted crystal structures was observed by the reflection spectroscopy. The critical concentrations of melting were ca. 0.01 and 0.03 in volume fraction in the presence of ion-exchange resins and in their absence, respectively. Crystal structures melted away during dryness by fusion of each spheres on the substrates, i.e., cover glass, watch glass, and Petri glass dish. Thickness profiles of the dried film changed sharply from the broad ring to the round hill as sphere concentration increased. The sharpness parameter S was evaluated from the ratio of the film size (diameter) against the full width at half maximum in the thickness profiles of the ring and/or the round hill. The S values decreased sharply from 30 to 1.2 as initial volume fraction of the spheres increased from 0.0005 to 0.1. The S values were significantly low compared with those of typical colloidal spheres, which supports the aggregate and/or fusion of the spheres resulting in their low convectional flow during dryness. The round hill profile at the high sphere concentration also supports that the fusion takes place easier during dryness. Microscopic observation of the dried film supports the formation of the homogeneous fused structures. It was clarified that colloidal crystallization of APS-PBA spheres takes place by the extended electrical double layers around the spheres like typical colloidal crystals of hard spheres. However, APS-PBA spheres are not so stable by the fusion especially at the high sphere concentrations and on the substrates.     

Drying dissipative structures of thermo-sensitive gel spheres of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) with low degree of cross-linking

Drying dissipative patterns of deionized suspensions (colloidal crystal state at high concentrations) of the thermo-sensitive gels of poly(N-isopropylacrylamide) with low degree of cross-linking of 0.5% (318 nm and 116 nm in the hydrodynamic diameter at 25 °C and 45 °C) were observed at 20 °C and 45 °C on a cover glass, a watch glass and a Petri glass dish. The broad rings were observed and their size decreased as micro-gel concentration decreased. Formation of the monodispersed agglomerated particles and their ordered arrays were observed. This work clarified the formation of the drying microscopic structures of (a) flickering ordered spoke-lines, (b) ordered rings, (c) net structure, and finally (d) lattice-like ordered structures of the agglomerated particles. The net and lattice structures formed more favorably at higher temperatures and/or higher degree of cross-linking of the gels. Importance of the convectional flow of the agglomerated particles during the drying processes is supported for the ordered array formation. The role of the electrical double layers around the agglomerated particles and the interaction of the particles with the substrate surfaces during dryness are also important for the ordering. The microscopic drying patterns of gel spheres were quite different from those of linear-type polymers and also from typical colloidal spheres, though the macroscopic patterns such as broad ring formation at the edges of the dried film were similar to each other.     

Drying dissipative structures of thermo-sensitive gel spheres of poly(N-isopropylacrylamide). Influence of degree of cross-linking of the gels

Drying dissipative patterns of de-ionized suspensions (colloidal crystal state above the critical concentrations of crystallization) of the thermo-sensitive gels of poly(N-isopropylacrylamide) with degrees of cross-linking of 10% and 2% (pNIPAm(200–10) and pNIPAm(200–2)) were observed at 20?°C and 45?°C on a cover glass, a watch glass, and a Petri glass dish. The broad rings were observed, and their size decreased as micro-gel concentration decreased. Formation of the monodispersed agglomerated particles and their ordered arrays were observed. Microscopic drying structures of (a) flickering ordered spoke-lines, (b) ordered rings, (c) net structure, and (d) lattice-like ordered structures of the agglomerated particles are observed. The net and lattice structures formed more favorably at high degrees of cross-linking, at high concentrations of the gels, and/or high temperatures. By the addition of sodium chloride, very large dendrite-like and net structures of the large agglomerated particles formed at 20?°C and 45?°C, respectively. Importance of the cooperated convectional flow of the agglomerated particles during the drying processes is supported for the ordered array formation. The role of the electrical double layers around the agglomerated particles and the interaction of the particles with the substrate surfaces during dryness are also important for the ordering. The microscopic drying patterns of gel spheres were different from those of linear type polymers and also from typical colloidal spheres, though the macroscopic patterns of gel system such as broad ring formation at the edges of the dried film were similar to other two systems.