Über die Reaktion von Schwefel mit Aminen und Formaldehyd. Eine neue Methode zur Herstellung von Thioformamiden und Dithiocarbamaten

The reaction of sulfur with primary or secondary amines and formaldehyde has been studied. A simple one step process for the preparation of thioformamides (RR′NCHS; R ? H, R′ ? CH₃, C₂H₅; R ? R′ ? CH₃, C₂H₅; R+R′ ? ? (CH₂), ? (CH₂), ? C₂H₄OC₂H) and the amine salts of N, N-dialkyl-dithiocarbamic acids (R₂NCS₂ · H₂NR₂, R ? CH₃, C₂H₅, C₄H₉; R₂ ? ? (CH₂), ? (CH₂), ? C₂H₄OC₂H) is reported. In addition, the isolation of diethylamidosulfoxylic acid, (C₂H₅)₂NSOH · 1/2 H₂O, the first derivative of a new class of compounds, is described. The physical properties and the ¹H-NMR. spectra of the above mentioned compounds are given.     

EPR study of the alimemazine cation radical

The EPR spectrum of alimemazine cation radicals (ALMZ⁺) in a perchlorate single crystal has been studied at 293 K. Since strong exchange interactions between the radicals did not allow the determination of the hyperfine splitting constants, the spectrum of an ALMZ⁺ solution, frozen at 77 K, was also studied. The results, checked by computer simulation, indicate orthorhombic symmetry of the g(2.0075, 2.0059, 2.0023) and hfs (A=3.6G; A=2.0G; A=15.6G) tensors.     

INDOR study of long range cross-ring couplings in heptahelicene: XX

INDOR experiments on heptahelicene have revealed the existence of positive ⁵J (epi), negative ⁴J (peri) and |⁴J| (peri) cross-ring couplings.     

33S chemical shifts and line widths of selected sulphones,sulphoximides, sulphimides,sulphides and sulphonium ions

The ³³S chemical shifts, δ, and the line widths of selected sulphones, sulphoximides, sulphimides, sulphides and sulphonium ions were measured at 23.009 MHz. δ increased with decreasing electronic charge on sulphur. The line width varied from 3–10 ppm for sulphones to 400 ppm for sulphonium ions. The higher geometrical flexibility of five-membered ring sulphones with respect to the six-membered ring compounds was reflected in the variations of δ with methyl substitution. Open-chain sulphoximides are shielded with respect to the corresponding sulphones, whereas open-chain sulphimides are deshielded with respect to the corresponding sulphoximides.     

The mechanism of O(3P) atom reaction with ethylene and other simple olefins

Reactions of oxygen atoms with ethylene, propene, and 2-butene were studied at room temperature under discharge flow conditions by resonance fluorescence spectroscopy of O and H atoms at pressures of 0.08 to 12 torr. The measured total rate constants of these reactions are K = (7.8 ± 0.6)·10^?13cm³s^?1,K = (4.3 ± 0.4) ± 10^?12 cm³ s^?1, K = (1.4 ± 0.4) · 10^?11 cm³ s^?1. The branching ratios of H atom elimination channels were measured for reactions of O atoms with ethylene and propene. No H-atom elimination was found for the reaction of O-atoms with 2-butene. A redistribution of reaction O + C₂ channels with pressure was found. A mechanism of the O + C₂ reaction was proposed and the possibility of its application to other olefins is discussed. On the basis of mechanism the pressure dependence of the total rate constant for reaction O + C₂ was predicted and experimentally confirmed in the pressure range 0.08–1.46 torr.     

Étude en RMN du 13C de Dérivés de la Pipéridone-4 Stériquement Encombrés et des Oximes Correspondantes

The regiospecific differences in chemical shifts caused by the oximino group, such as Δδ as Δδ parameters, are useful to estimate conformational distortions directly from ¹³C spectra. Particularly, twist-boat conformations resulting from oximation of sterically hindered piperidones are unambiguously detected.     

Mass spectrometry of thio analogues of pyrimidine bases: 2-alkoxycarbonylalkyl-thiouracils

The mass spectral fragmentation of twelve new 2-alkoxycarbonylalkylthio substituted derivatives of uracils is discussed and fragmentation pathways, elucidation of which were assisted by accurate mass measurements and metastable transitions are proposed. It has been found that the basic mass spectral fragmentation of these compounds is due to cleavage of S? C, O? C and C? C bonds of the alkoxycarbonylalkylthio group.     

The proton affinity and the structure of protonated species of methylsilane

An ab initio LCAO-MO-SCF calculation was made on the proton affinity (PA ) of methylsilane (CH₃SiH₃) by using STO -3G, MIDI -1, and MIDI -1* basis sets. Three types of protonated methylsilane are taken into account, and their geometrical parameters are optimized. The calculated PA of CH₃SiH₃ is 160.5 kcal/mol, which exceeds that of SiH₄ by 11.5 kcal/mol. The protonated species (I) which refers to Si—C bond protonation is shown to be most favorable, and to be a weak σ-complex between CH₄ and SiH. Other two species are also σ-complexes between H₂ molecule and SiH₃CH or CH₃SiH, and similar to CH, SiH, GeH, and C₂H.     

The 13C and D kinetic isotope effects in the reaction of CH4 with Cl

The kinetic isotope effects in the reaction of methane (CH₄) with Cl atoms are studied in a relative rate experiment at 298 ± 2 K and 1013 ± 10 mbar. The reaction rates of ¹³CH₄, ¹²CH₃D, ¹²CH₂D₂, ¹²CHD₃, and ¹²CD₄ with Cl radicals are measured relative to ¹²CH₄ in a smog chamber using long path FTIR detection. The experimental data are analyzed with a nonlinear least squares spectral fitting method using measured high‐resolution spectra as well as cross sections from the HITRAN database. The relative reaction rates of ¹²CH₄, ¹³CH₄, ¹²CH₃D, ¹²CH₂D₂, ¹²CHD₃, and ¹²CD₄ with Cl are determined as k/k = 1.06 ± 0.01, k/k = 1.47 ± 0.03, k/k = 2.45 ± 0.05, k/k = 4.7 ± 0.1, k/k = 14.7 ± 0.3. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 37: 110–118, 2005     

Thermisches Verhalten und Kristallstruktur von YAl3Cl12

Thermal Behaviour and Crystal Structure of YAl₃Cl₁₂ We determined the thermodynamic data of YAl₃Cl₁₂ ΔH = ?739.9 ± 3 kcal/mol and S = 136.1 ± 4 cal/K · mol by total pressure measurements and ΔH = ?739.1 ± 1.6 kcal/mol by solution calorimetry. Using DTA-investigations we established the phase diagram in the system AlCl₃–YCl₃. The crystal structure was refined on the basis of single crystal data (P3₁ 12; Z = 3; a = 1 046.8(2); c = 1 562.3(3) pm).     

Molecular mechanics studies of ketene derivatives and related structures

The MM2 and MM3 force fields have now been parameterized for ketene and its various derivatives. With the addition of the C_sp ? O bond stretching and C?C_sp?O bond bending parameters, calculations were performed on ketene and six substituted ketene compounds. The MM2 results are quite good with only minimal errors in the calculation of C? H bond lengths and H-C-H bond angles. Additionally, C? F bond parameters in MM2 have been re-adjusted to give better results in monofluorinated species, but, unfortunately, resulting in greater error in the polyfluorinated compounds. The results of geometry calculations by MM3 are similar to those obtained by MM2 with the exception of a significant improvement in the geometry of dimethylketene. The MM3 vibrational frequencies calculated in this study are also in good agreement with available experimental and ab initio results with the exception of a few low frequency in-and out-of-plane bending modes. © 1992 by John Wiley & Sons, Inc.     

Spectroscopic studies on N,N-dimethylamides—V Amide-rotational barriers from iterative total line shape analysis of N,N-dimethylcyclopropanecarboxamides

Amide-rotational barriers in some 2-substituted N,N-dimethylcyclopropanecarboxamides in CDCl₃ as a solvent (0·25 M) were obtained with an iterative total line shape analysis. N,N-dimethylcyclopropanecarboxamide shows a barrier ΔG = 16·72 ± 0·01 kcal/mole. Para-nitro substitution in (trans)-2-phenyl-N,N-dimethylcyclopropanecarboxamide raises the barrier ΔG from 17·08 ± 0·01 to 17·40 ± 0·02 kcal/mole.     

Recommendations for measuring second-order rate constants and kinetic solvent isotope effects on acid-catalyzed reactions

Kinetic solvent isotope effects (KSIE) were measured for the hydrolyses of acetals of benzaldehydes in aqueous solutions covering the pH (pD) range of 1–6. For p-methoxybenzaldehyde diethyl acetal, k/k = 1.8–3.1, depending on the procedure used to calculate the KSIE and on the pH (pD) range used as the basis for k(k). It is shown that this variation is an experimental artifact, and is a characteristic of KSIE measurements in general. It is recommended that k be calculated from a least-squares fit of data to the equation k_obs = k[L⁺], and that the KSIE be reported as k/k. The limitation remains, however, that the KSIE measured for a variety of substances over quite different pH (pD) ranges may not be comparable to more than ?20%. The source of these observations is discussed in terms of small changes in the activity coefficient ratios (a specific salt effect), including the solvent isotope effect on the activity coefficient ratio [eq. (3)].     

63Cu-NMR.-Untersuchungen von Kupfer (I)-Tetrapyridin-und Kupfer (I)-Tetraacetonitrilsolvaten

⁶³Cu-NMR.-Spectra of Cu(CH₃CN)₄X (X = ClO, BF, PF) and Cu(C₅H₅N)₄X (X = ClO, BF) in solution are reported at different temperatures and concentrations. The influence of temperature on the linewidth and chemical shift indicates an equilibrium of Cu(CH₃CN) and Cu(C₅H₅N) with another complex of lower symmetry. The preferential solvation of Cu (I) by pyridin in a mixture acetonitrile/pyridine is clearly shown.     

Schwingungsspektren und Kraftkonstanten der Übergangsreihe O2PF—S2PF— S2P(CH3)

Vibration spectra and force constants of the series O₂PF — S₂PF — S₂P(CH₃). The vibrational spectra of OSPF, S₂PF, S₂PF(CH₃) and S₂P(CN) are reported and discussed with O₂PF and S₂P(CH₃). On the basis of a simplified valence-force-field the force constants are calculated and the bonding relations are discussed. In the ions, f PF is lower than in corresponding molecules. The ionic charge is distributed over nearly all atoms of the ions.     

The quantum efficiency of the primary processes in formaldehyde photolysis at 3130 Å and 25°C

The mechanism of the photolysis of formaldehyde was studied in experiments at 3130 Å and in the pressure range of 1–12 torr at 25°C. The experiments were designed to establish the quantum yields of the primary decomposition steps (1) and (2), CH₂O + hν → H + HCO (1): CH₂O + hν → H₂ + CO (2), through the effects of added isobutene, trimethylsilane, and nitric oxide on Φ_CO and Φ. The ratio Φ_CO/Φ was found to be 1.01 ± 0.09(2σ) and (Φ + Φ_CO)/2 = 1.10 ± 0.08 over the range of pressures and a 12-fold change in incident light intensity. Isobutene and nitric oxide additions reduced Φ to about the same limiting value, 0.32 ± 0.03 and 0.34 ± 0.04, respectively, but these added gases differed in their effects on Φ_CO. With isobutene addition Φ_CO/Φ reached a limiting value of 2.3; with NO addition Φ_CO exceeded unity. The addition of small amounts of Me₃SiH reduced Φ to 1.02 ± 0.08 and lowered Φ_CO to 0.7. These findings were rationalized in terms of a mechanism in which the “nonscavengeable,” molecular hydrogen is formed in reaction (2) with ?₂ = 0.32 ± 0.03, while the “free radical” hydrogen is formed in reaction (1) with ?₁ = 0.68 ± 0.03. In the pure formaldehyde system these reactions are followed by (3)–(5): H + CH₂O → H₂ + HCO (3); 2HCO → CH₂O + CO (4); 2HCO → H₂ + 2CO (5). The data suggest k₄/k₅ ? 5.8. Isobutene reduced Φ by the reaction H + iso-C₄H₈ → C₄H₉ (20), and the results give k₂₀/k₃ ? 43 ± 4, in good agreement with the ratio of the reported values of the individual constants k₃ and k₂₀.     

Generalized statistical gelation theory

Gel points in random polymerizations of the general type Σ_iRA + Σ_jRB in which A-groups react with A- and B-groups, and B-groups react only with A-groups are considered. (The symbols Σ_i and Σ_i signify that the A- and B-bearing reactants RA and RB can be mixtures of monomers of different functionalities, denoted generally as f_ai and f_bj.) The usual case of A-groups reacting only with B-groups is a special case of the present theory. The effects of chemical kinetics, the competitive reaction of A- and B-groups, are separated from the generalized statistical condition for gelation. The former are used to define reaction curves and the latter, gelation curves. Both types of curve are represented as p_a as a function of p_b. For a given polymerization, gelation occurs when the reaction curve and the gelation curve intersect. When A-groups react only with B-groups, the gel points are those for the usual type of Σ_iRA + Σ_jRB polymerization, and, in the limit of A-groups only reacting with A-groups, the gel points are those for Σ_iRA self polymerizations.     

Acyl- und Alkylidenphosphane. XXXIV [1]. Methoxycarbonylphosphane – Verbindungen aus dem Umfeld des Phosphaalkins PC?O?Li(dme)2

Acyl- and Alkylidenephosphanes. XXXIV. Methoxycarbonylphosphanes – Compounds closely related to the Phosphaalkyne P?C? O? Li(dme)₂ Whereas methyl fluoroformate reacts with an equimolar amount of bis(tetrahydrofuran)lithium bis(trimethylsilyl)phosphanide ( 1a )

1 Die Numerierung des betreffenden Lithiumphosphanids wird um das Suffix a erweitert, wenn von einer Röntgenstrukturanalyse her Gehalt an koordinierendem Solvens und Konstitution bekannt sind. Nach Möglichkeit beziehen wir uns dann im Text und in den Gleichungen auf derartige Spezies.

in 1,2-dimethoxyethane to give an inseparable mixture of tris(methoxycarbonyl)- ( 3 ) and tris(trimethylsilyl)phosphane, colourless crystals of lithium bis(methoxycarbonyl)phosphanide-1,2-dimethoxyethane (2/3) ( 4a ) are isolated in 84% yield from an analogous reaction with (1,2-dimethoxyethane- O,O ′)lithium phosphanide ( 2a ) in a molar ratio of 2:3. When, however, this ratio is changed to 1:2 or 1:1, the ³¹ P nmr spectra of those solutions show the formation of the by-product lithium methoxycarbonylphosphanide ( 10 ) or methoxycarbonylphosphane ( 6 ) respectively. The function of phosphanide 10 as an important intermediate in the synthesis of the phosphaalkyne P?C? O? Li(dme) ₂ ( Ia ) [1] is discussed in detail. With trifluoroacetic acid in 1,2-dimethoxyethane the diacylphosphanide 4a is converted via a lithium-hydrogen exchange into bis(methoxycarbonyl)phosphane ( 9 ). Unlike 1,3-diketones and other diacylphosphanes [25], solutions of this compound do not show the presence of an enol tautomer even in very unpolar solvents. Tris(methoxycarbonyl)phosphane ( 3 ) obtained in a pure state from methyl chloroformate and phosphanide 2a , might decarboxylate to give the corresponding bis(methoxycarbonyl)methyl derivative 5 when the reaction mixture is worked up. ³¹P and characteristic ³¹C nmr data of these methoxycarbonylphosphanes and their related lithium phosphanides are compared with each other, the tris(phenoxycarbonyl) ( 7 ) and the bis(methoxycarbonyl)phenyl compound 8 being included. An x-ray structure determination (P1 ; a 715.8(2); b = 899.5(1); c = 1262.7(2)pm; α = 99.93(1)°; β = 96.01(1)°; γ = 104.81(1)° at ?100±3°C; Z = 1 dimer; wR₂ = 0.152) shows lithium bis(methoxycarbonyl)phosphanide-1,2-dimethoxyethane (2/3) ( 4a ) to crystallize as a centrosymmetric neutral complex. Either lithium square pyramidally coordinated is bound to both carbonyl oxygen atoms of an almost planar bis(methoxy-carbonyl)phosphanide {Li? O_av. 197.4; O ‥ O 280.9} as well as of an 1,2-dimethoxyethane ligand (210.3; 261.6) and is brigded by another solvent molecule (204.0 pm). Further characteristic average bond lengths and angles are as follows: P$ \ddot - $C 179.5; C$ \ddot - $O 122.2; C? O 136.5; O? CH₃ 143.2 pm; C$ \ddot - $P$ \ddot - $C 98.8°; P$ \ddot - $C$ \ddot - $O 132.5°; P$ \ddot - $C? O 107.9°.     

Chemical actinometry at 147.0 nm

Hexafluoroacetone (HFA) and O₂ were photolyzed at 147.0 nm to investigate their use in chemical actinometry. The products, CO for the former and O₃ in the latter case, were monitored. For accurate comparison, both of these substances were irradiated by a single light source with two identical reaction cells at 180° to each other. The light intensities I were measured under the same integrated as well as instantaneous photon flux based on ? and ?_CO (quantum yield) as 2 and 1, respectively. Optimum conditions for maximum product yield were 5.0 torr HFA pressure and an O₂ flow rate of 200 ml/min at 1 atm pressure for a 20-minute photolysis period. For light intensity variations between 1.09 × 10¹⁴ and 2.10 × 10¹⁵ photons absorbed/sec, the ratio I/I_HFA was found to be unity. Calibration with the commonly used N₂O actinometer for a ? value of 1.41 showed that I/I_HFA and I/I are unity. Both HFA and O₂ are suitable chemical actinometers at 147.0 nm with ?_CO and ? of 1 and 2, respectively. The light intensity determination in the first case involves the measurement of only one product which is noncondensible at 77°K, whereas wet analysis for O₃, the only product, in the second actinometer is necessary. Both of these determinations are quite simple and are preferable over product analysis in N₂O actiometry, wherein N₂ separation from other noncondensibles at 77°K is required.     

Extended basis CNDO calculations of linear and nonlinear electric susceptibilities of some molecular dianions and carbonions using coupled Hartree–Fock perturbation theory

The results of calculating the average polarizabilities, first and second hyperpolarizabilities and molar Kerr constants of C₅H, C₆H, 2-C₁₀H, 2-C₁₄H, C₈H and C₈H are reported. The main elements of our computational scheme are McWeeny's coupled Hartree–Fock perturbation theory and an extended basis CNDO wave function. It is shown that the studied anions have nonlinearities within the same order of magnitude as their respective uncharged parent molecules. The Kerr constants of these anions are analyzed and the contribution of the various terms is appraised.