Long-lived polymer radicals. III. Synthesis of block copolymer by the reaction of living poly(N-methylacrylamide) radical with some vinyl monomers

N-Methylacrylamide (NMAAm) was polymerized quantitatively by using di-tert-butyl peroxide as photosensitizer to be, for the most part, incorporated in living poly(NMAAm) radical. The living polymer radical reacted effectively with acrylate monomers to yield block copolymer. Longer alkyl chain of the acrylate monomer caused a decrease in the conversion of the second monomer. Methacrylate monomers, such as methyl methacrylate and cyclohexyl methacrylate, showed relatively low reactivities in comparison with acrylates. Styrene exhibited a much lower conversion. The resulting block copolymers showed different thermochromic behaviors in methyl benzoate from that of poly(NMAAm). This is explained on the basis of the difference between refractive indexes of the block copolymers and poly(NMAAm).     

Long-lived polymer radicals. VIII. Easy formation of long-lived propagating radicals of vinyl monomers at room temperature

Poly[acryloyl-L-valine (ALV)] microspheres containing peroxy ester groups were prepared by radical copolymerization of ALV with a small amount of di-tert-butyl peroxyfumarate. When the microspheres were irradiated in the presence of second vinyl monomers, long-lived propagating radicals of the second monomers were formed in the microspheres by the reaction of microsphere polymer radicals with the monomers. The presence of a minute quantity of ethyl alcohol served to soften the microspheres and made the polymer radicals more mobile in the microspheres. As a result, sharper ESR spectra of the propagating radicals were observed although their lifetimes became shorter. This microsphere method also yielded easily the stable propagating radicals of a-methylstyrene and 1,1-diphenylethylene which have no homopolymerizability in usual radical polymerization. When N-n-propyldimethacroylamide and N,N′-dimethyl-N,N′-dimethacroylhydrazine, which undergo cyclopolymerization, were used as second monomer, uncyclized polymer radicals were only observed. Some discussions were given on the propagation mechanism of the cyclopolymerization.     

Nanosphere formation in copolymerization of methyl methacrylate with poly(ethylene glycol) macromonomers

Polymeric nanospheres consisting of poly(methyl methacrylate) (PMMA) cores and poly(ethylene glycol) (PEG) branches on their surfaces were prepared by free radical copolymerization of methyl methacrylate (MMA) with PEG macromonomers in ethanol/water mixed solvents. PEG macromonomers having a methacryloyl (MMA‐PEG) and p‐vinylbenzyl (St‐PEG) end group were used. It has become clear that the obtained polymer dispersions form three kinds of states, particle dispersion (milky solution), clear solution, and gel/precipitation. It was found that the reaction parameters such as MMA concentration, molecular weight, and concentration of PEG macromonomers, and water content can affect nanosphere formation in a copolymerization system. The water volume fraction of mixed ethanol/water solvents affected the particle size of the nanospheres. These differences in the formation of nanospheres were due to the solvophilic/solvophobic balance between the copolymers and solvents during the self‐assembling process of the copolymers. The sizes of nanospheres can be controlled by varying concentration of PEG macromonomer and water content in solvents. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1811–1817, 2000     

Long-lived polymer radicals. VI. Polymerization of N-methylmethacrylamide with formation of living propagation radicals

The polymerization of N-methylmethacrylamide (NMMAm) with azobisisobutyronitrile (AIBN) was investigated kinetically in benzene. This polymerization proceeded heterogeously with formation of the very stable poly(NMMAm) radicals. The overall activation energy of this polymerization was calculated to be 23 kcal/mol. The polymerization rate (R_p) was expressed by: R_p = k[AIBN]^0.63-0.68[NMMAm]^1?2.5. Dependence of R_p on the monomer concentration increased with increasing NMMAm concentration. From an ESR study, cyanopropyl radicals escaping the solvent cage were found to be converted to the living propagating radicals of NMMAm in very high yields (ca. 90%). Formation mechanism of the living polymer radicals was discussed on the basis of kinetic, ESR spectroscopic, and electron microscopic results.     

Synthesis and thermal properties of poly(cycloalkyl methacrylate)s bearing bridged- and fused-ring structures

Radical polymerizations of some cycloalkyl methacrylates bearing bridged- and fused-ring structures, i.e., bornyl methacrylate (BoMA), isobornyl methacrylate (IBoMA), 2-decahydronaphthyl methacrylate (DNMA), and 3-tetracyclo [4.4.0^2,5.1^7,10] dodecyl methacrylate (TCDMA), were carried out. The radical polymerization reactivities of these monomers depended on the structure of the cycloalkyl ester groups in the following order: TCDMA > BoMA > DNMA > CHMA > IBoMA > MMA, where CHMA and MMA are cyclohexyl and methyl methacrylates, respectively. The propagation and termination rate constants of these monomers were evaluated from the polymer radical concentration determined by electron spin resonance spectroscopy. The solubilities and microstructures of the resulting polymers were examined. Thermal properties, i.e., glass transition temperatures and decomposition behaviors, of the polymers were also investigated and related to the structures of the polymer side chain. © 1993 John Wiley & Sons, Inc.     

Terpolymerization of methyl methacrylate, poly(ethylene glycol) methyl ether methacrylate or poly(ethylene glycol) ethyl ether methacrylate with methacrylic acid and sodium styrene sulfonate: determination of the reactivity ratios

Materials bearing ionic monomers were obtained through free radical terpolymerization of methyl methacrylate (MMA), poly(ethylene glycol) methyl ether methacrylate (PMEM) or poly(ethylene glycol) ethyl ether methacrylate (PEEM) with methacrylic acid (MA) and sodium styrene sulfonate (NaSS). The reactions were carried out in dimethyl sulfoxide using azobis(isobutyronitrile) as initiator. The reactivity ratios of the different couple of monomers were calculated according to the general copolymerization equation using the Finnemann-Ross, Kelen-Tüdos and Tidwell-Mortimer methods. The values of the reactivity ratios indicate that the different monomer units can be considered as randomly distributed along the chains for terpolymerizations of MMA, PMEM or PEEM with MA and NaSS. The average composition of the comonomers in the different terpolymers were calculated, showing a good agreement between the experimental and theoretical compositions. The instantaneous compositions are constant until about 70% of conversion. For higher conversions, the insertion of ionic monomers increases or decreases according to the system studied.     

The interaction of poly(methacrylate) radicals with diphenyldiacetylenes

The free radical polymerization of methyl methacrylate (MMA) in the presence of p,p′- disubstituted diphenylbutadiynes was studied. Both the rate and degree of polymerization are somewhat lowered by the presence of the diynes, but the propagating radicals were stabilized giving clear ESR signals of the interacted polyMMA radicals at the polymerization temperature of 70°C. The magnitude of the interaction depended on the electron density of the diynes; in the cases of diphenylbutadiyne and dimethoxycarbonyldiphenylbutadiyne, the intoraction was more enhanced showing ESR signals with smaller spectra widths and increasing the number of radicals with the polymerization time, while in the cases of electron donor-substituted diynes the interaction was weaker and the radical concentration remained constant during the polymerization. These systems are considered to be examples of the stabilization of transient radicals by the direct interaction of radicals with additives without formation or breaking of chemical bonds. No diacetylenic group was found in the polyMMA obtained. © 1994 John Wiley & Sons, Inc.     

Reversible addition–fragmentation transfer (RAFT) copolymerization of methyl methacrylate and styrene in miniemulsion

In the reversible addition–fragmentation transfer (RAFT) copolymerization of two monomers, even with the simple terminal model, there are two kinds of macroradical and two kinds of polymeric RAFT agent with different R groups. Because the structure of the R group could exert a significant influence on the RAFT process, RAFT copolymerization may behave differently from RAFT homopolymerization. The RAFT copolymerization of methyl methacrylate (MMA) and styrene (St) in miniemulsion was investigated. The performance of the RAFT copolymerization of MMA/St in miniemulsion was found to be dependent on the feed monomer compositions. When St is dominant in the feed monomer composition, RAFT copolymerization is well controlled in the whole range of monomer conversion. However, when MMA is dominant, RAFT copolymerization may be, in some cases, out of control in the late stage of copolymerization, and characterized by a fast increase in the polydispersity index (PDI). The RAFT process was found to have little influence on composition evolution during copolymerization. The synthesis of the well‐defined gradient copolymers and poly[St‐b‐(St‐co‐MMA)] block copolymer by RAFT miniemulsion copolymerization was also demonstrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6248–6258, 2004     

Copolymerization reactivity of poly(methyl methacrylate) macromer

Poly(methyl mehtacrylate)(PMMA) macromers with several vinyl groups at both chain ends were synthesized by the mechanical scission reaction of the main chain in the presence of p-divinylbenzene(p-DVB). The radical copolymerization of this macromer with styrene(St) or MMA was carried out in benzene at 60°C and the reactivity ratio of both monomers (r₂) was calculated from a kinetic scheme of copolymerization. As a result, the effect of molecular weight and concentration of macromers was not observed in both copolymerization systems. The value of r₂, however, decreased as the number of end vinyl groups in a macromer (N) increased. These results are discussed in some detail as we describe the construction of the kinetic model of copolymerization.     

Mechanism of alternating copolymerization of methyl methacrylate with styrene in the presence of diethylaluminum chloride

A kinetic study of the propagation mechanism of the alternating copolymerization of styrene (St) with methyl methacrylate (MMA) in the presence of a complexing agent (diethylaluminum chloride, DEAC) in bulk and in tetrachloroethylene solutions at a molar ratio DEAC/MMA = 0.5 has been carried out. It has been shown that the copolymerization is a chain radical process characterized by a short active-center lifetime, bimolecular termination, and high rate of chain transfer to the complexed MMA. A kinetic scheme has been proposed for the propagation mechanism of alternating copolymerization in the presence of a complexing agent not requiring independent measurements of the equilibrium constant of complexation. It has been found that spontaneous and UV-initiated copolymerizations in the system have different mechanisms of initiation and a common mechanism of propagation. The propagation proceeds by addition of single monomers as well as donor-acceptor complexes of the comonomers to the propagation radicals, with the first mechanism being predominant. Inclusion of the monomers in the complex leads to an increase of the St reactivity and to a decrease of the MMA reactivity in propagation to the corresponding macroradicals in comparison with the reactivity of the free monomers. A number of kinetic and statistical parameters of the propagation reaction have been calculated.     

Photoinitiated polymerization of methyl methacrylate and methyl acrylate with 14C-labeled benzoin methyl ethers

Three ¹⁴C-labeled benzoin methyl ether (α-methoxy-α-phenylacetophenone) derivatives were utilized as photoinitiators in the polymerization of methyl methacrylate (MMA) and methyl acrylate (MA). The results of polymer end-group analysis are in accord with a mechanism of benzoin ether photocleavage into initiator radicals and dispute earlier labeling studies which were interpreted as evidence for copolymerization of excited-state benzoin ethers with reactive monomers. In MMA polymerization, the results indicate a preference for termination by disproportionation (～60%) and provide evidence for primary radical termination at 0.041M photoinitiator (optically dense solutions) in neat MMA. Evidence for chain branching by initiator radical hydrogen abstraction from poly(methyl acrylate) (PMA) is also presented. The benzoyl and α-methoxybenzyl radicals, produced on photolysis of benzoin methyl ether, appear to be equally effective in both initiation and hydrogen-abstraction processes. Quantum yields at 366 and 313 nm indicate the absence of a wavelength effect.     

Effects of solvent as an electron-pair acceptor on propagation reactions during radical polymerization and copolymerization of polar vinyl monomers

We carried out radical homopolymerization and copolymerization in various kinds of solvents at 60°C by using diisopropyl fumarate (DiPF) and methyl methacrylate (MMA) as electron-accepting polar monomers and styrene (St) and vinyl benzoate (VB) as electron-donating monomers. The highest polymerization rate was observed in the polar and electron-pair accepting solvents, such as 2,2,2-trifluoroethanol for the homopolymerization and copolymerization of these monomers. It has been revealed that the polymerization rate is correlated to the electron-pair–accepting property of the solvent used, rather than the polarity in the linear free energy relationship. We have demonstrated the validity of the acceptor number as the index for interpreting the interaction of the solvent with the monomer and the propagating chain end. The monomer reactivity ratios were determined for the St–DiPF, VB–DiPF, and St–MMA copolymerizations. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2803–2814, 1999     

Block copolymerization of methyl methacrylate with poly(ethylene oxide) radicals formed by high-speed stirring

A block copolymer of methyl methacrylate with poly(ethylene oxide) was synthesized by initiation with poly(ethylene oxide) radicals formed by high-speed stirring. The effects of the concentration of the monomer, the concentration of the polymer, the degree of polymerization, the rotation speed, and the solvent on the rate of copolymerization were studied. It was found that the rate of copolymerization was proportional to the concentration of the monomer and to the square root of the rate of scission of the polymer chain. The block copolymerization of methyl methacrylate monomer and styrene monomer (1 : 1 mole ratio) with poly(ethylene oxide) radicals was also carried out by the same method and it was found that the block copolymerization was a radical one.     

Electron spin resonance studies of propagating radicals in polymerization. I. Methacrylate propagating radicals

Ferric chloride-photosensitized free-radical initiation was used to generate propagating radicals in polymerization of methacrylic acid (MAA), allyl methacrylate (AMA), methyl methacrylate (MMA), 1,3-butylene dimethacrylate (1,3-BDMA), hydroxypropyl methacrylate (HPMA), lauryl methacrylate (LMA), hexyl methacrylate (HMA), and methacrylamide (MA) in rigid glasses of methanol or acetone at near liquid nitrogen temperatures. The formation and conformational changes of these propagating radicals at different temperatures were studied by electron spin resonance (ESR) spectroscopy. When methanol was the rigid glass, ·CH₂OH radicals were formed initially and were stable below ?160°C. As the temperature of the rigid glass was increased, the ·CH₂OH radicals reacted with monomer to yield propagating radicals. With the exception of the propagating radical for methacrylamide, the propagating radicals of the methacrylates examined initially generated five-line ESR spectra which gradually changed to nine-line spectra, as temperature of the rigid glass was increased. It was concluded that one type of propagating radical was formed in all cases. However, when the temperature of the rigid glass was increased, the single structural conformation that initially allowed one of the methylene hydrogens and methyl group to interact with the unpaired electron to generate only a five-line spectrum was changed to yield a second conformation that allowed interaction to generate an additional four-line spectrum. Finally, a mixture of the propagating radical for methacrylate monomer in two structural conformations was obtained, and an ESR spectrum consisting of nine lines (5 + 4 lines) was generated. In the case of the propagating radical for methacrylamide this change to yield two structural conformations evidently was hindered, so that only an ESR spectrum consisting of five lines was generated.     

A Comparative Study of Methyl Methacrylate/Butyl Acrylate Copolymerization Kinetics by Atom‐Transfer and Conventional Radical Polymerization

Methyl methacrylate and butyl acrylate monomers are copolymerized by atom‐transfer radical polymerization, affording polymers with well‐controlled molecular weight and low polydispersity. A kinetic analysis of this system is compared with the corresponding free‐radical polymerization system. The copolymerization rate follows an opposite trend to that observed in conventional copolymerization. This fact is attributed to a smaller population of radicals generated in the reaction, since the relative fraction of propagating radicals is the same as that in classical copolymerization.     

Atom transfer radical polymerization initiated by N‐bromosuccinimide

N‐Bromosuccinimide (NBS) was used as the initiator in the atom transfer radical polymerizations of styrene (St) and methyl methacrylate (MMA). The NBS/CuBr/bipyridine (bpy) system shows good controllability for both polymerizations and yields polymers with polydispersity indexes ranging from 1.18 to 1.25 for St and 1.14 to 1.41 for MMA, depending on the conditions used. The end‐group analysis of poly(MMA) and polystyrene indicated the polymerization is initiated by the succinimidyl radicals formed from the redox reaction of NBS with CuBr/bpy. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5811–5816, 2004     

Synthesis and Characterization of Poly(ϵ‐CL)‐block‐poly(MMA‐co‐St)‐block‐poly(ϵ‐CL) by Combination of Coordination and Controlled Radical Polymerization

The triblock copolymer poly(ϵ‐caprolactone)‐block‐poly[(methyl methacrylate)‐co‐styrene]‐block‐poly(ϵ‐caprolactone) was synthesized by a combination of coordination polymerization and controlled radical mechanism. The poly(ϵ‐caprolactone) prepolymers (PCL_BP) were first obtained by coordination polymerization using benzopinacol as the initiator and aluminium triisopropoxide as the promoter at room temperature. It was determined by means of UV and NMR spectroscopy that the benzopinacolate groups are left intact in the PCL_BP prepolymers; no isomerization was found. The benzopinacolate groups incorporated into the poly(ϵ‐caprolactone) then initiate the copolymerization of styrene (St) and methyl methacrylate (MMA) via a controlled radical mechanism at 95°C. The desired block copolymers were characterized by GPC, IR, UV and NMR spectroscopy in detail.     

Grafting of Vinyl Monomers onto Poly(Acryloyl-L-valine) Microspheres Containing Peroxyester Groups

Abstract

Poly(acryloyl-L-valine) microspheres containing peroxyester groups were prepared by copolymerization of acryloyl-L-valine with di-t-butyl peroxyfumarate in acetophenone. Graft copolymerization of some vinyl monomers onto the microspheres was carried out by photolysis or thermolysis of the peroxyester groups in the microspheres. When benzyl methacrylate (BzMA) was used as the second monomer, BzMA conversion and grafting efficiency were found to increase with time. This might be ascribed to long lifetime of the polymer radicals in the microspheres. In fact, the very stable propagating radical of BzMA was observed by ESR in the photoinduced graft copolymerization system of the microspheres and BzMA at room temperature. The copolymerization process was investigated by ESR.     

Miscibility of polycarbonates with copolymers containing cyclohexylmethacrylate

We prepared various copolymers containing styrene and methacrylates to examine their miscibility with polycarbonates such as bisphenol A polycarbonate (PC), dimethylpolycarbonate (DMPC), and tetramethylpolycarbonate (TMPC). Among the various copolymers examined, poly(methyl methacrylate‐co‐cyclohexylmethacrylate) [P(MMA–CHMA)] copolymers containing proper amounts of cyclohexylmethacrylate (CHMA) formed miscible blends with PC and DMPC, whereas TMPC did not form a miscible blend with P(MMA–CHMA). However, TMPC was miscible with poly(styrene‐co‐cyclohexylmethacrylate) [P(S–CHMA)] copolymers containing less than about 40 wt % CHMA, whereas PC and DMPC were always immiscible with P(S–CHMA). Miscible blends exhibited lower critical solution temperature (LCST)‐type phase behavior. Binary interaction energies were calculated from the observed phase boundaries with lattice–fluid theory combined with a binary interaction model. The quantitative interaction energy of each binary pair indicated that the phenyl ring substitution of polycarbonate with methyl groups did not lead to interactions that were favorable for miscibility with methyl methacrylate (MMA) and CHMA, but it did lead to favorable interactions with styrene. The addition of CHMA to MMA initially increased the LCST but ultimately led to immiscibility with PC and DMPC; however, addition of CHMA to styrene always decreased the LCST with TMPC. The increased LCST of PC or DMPC blends stemmed from intramolecular repulsion between MMA and CHMA, whereas the decreased LCST of TMPC/P(S–CHMA) blends with CHMA content came from negative interaction energy between styrene and CHMA. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1948–1955, 2001     

Methacrylic acid and methyl methacrylate oligomers adsorbed to porous isotactic poly(methyl methacrylate) ultrathin films and mechanistic studies of living template polymerization

Methacrylic acid (MAA), methyl methacrylate (MMA), methacrylamide, and oligomers of MAA and MMA were selected as a model of active radical species in living template polymerization using stereocomplex formation. The adsorption behaviors of the aforementioned model compounds were examined toward porous isotactic‐(it‐) poly(methyl methacrylate) (PMMA) ultrathin films on a quartz crystal microbalance, which was prepared by the extracting of syndiotactic‐(st‐) poly(methacrylic acid) (PMAA) from it‐PMMA/st‐PMAA stereocomplexes. The apparent predominant adsorption of oligomers to monomers was observed in both PMAA and PMMA oligomers, suggesting that the mechanism of template polymerization follows the pick up mechanism. Although vinyl monomers were not incorporated into the porous it‐PMMA ultrathin film, both PMMA and PMAA oligomers were adsorbed at the initial stages. However, adsorbed amounts were limited to about 5 and 15% at 0.1 mol L^?1, respectively, which are much smaller values than corresponding st‐polymers. The results imply that radical coupling reaction is prevented during template polymerization to support the resulting living polymerization. ATR‐IR spectral patterns of oligomer complexes and it‐PMMA slightly changed in both cases, suggesting complex formation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5879–5886, 2008