Syndiotactic 1,2-polybutadiene with Co-CS2 catalyst system. III. 1H- and 13C-NMR study of highly syndiotactic 1,2-polybutadiene

The ¹H and ¹³C-NMR spectra of highly crystalline syndiotactic 1,2-polybutadiene (s-PB) are discussed in order to clarify the mechanism of butadiene polymerization with cobalt compound–organoaluminum–CS₂ catalysts. Cis opening of the double bonds in the syndiotactic polymerization is affirmed by the study of the copolymer from perdeuteriobutadiene and cis,cis-1,4-dideuteriobutadiene. S-PB (mp 210°C) has 99.7% 1,2 units, 0.3% isolated cis-1,4 units, and 99.6% syndiotacticity. Polymer ends (2-methyl-3-butenyl group and conjugated diene structure) are also determined. The differences in free energy of activation between 1,2 and cis-1,4 propagation and between syndiotactic and isotactic propagation are 14.0 and 9.6 kcal/mol, respectively, for Co(acac)₃-AlEt₃-AlEt₂Cl-CS₂, and 6.7 and 5.7 kcal/mol, respectively, for the aluminum-free Co(C₄H₆)(C₈H₁₃)CS₂ system. The conformation of s-PB in o-dichlorobenzene at 150°C is described by the sequence (tt)_1.6(gg)(tt).     

Syndiotactic 1,2-polybutadiene with Co-CS2 catalyst system. II. Catalysts for stereospecific polymerization of butadiene to syndiotactic 1,2-polybutadiene

Butadiene is polymerized by cobalt compound–organoaluminum–CS₂ catalysts to give highly crystalline syndiotactic 1,2-polybutadiene (s-PB) having melting point up to 216°C. An aluminum-free catalyst, Co(C₄H₆)(C₈H₁₃)-CS₂, is also effective. Syndiotactic polymerization with Co(C₄H₆)(C₈H₁₃)-CS₂ is not interrupted by the addition of protic substances such as water and alcohol, but is influenced by donor or acceptor substances. The donor molecule, e.g., dimethylsulfoxide or dimethylformamide, decreases the stereoregularity, i.e., syndiotacticity and 1,2 content. An acceptor molecule of organoaluminum with appropriate acidity such as AlEt₃-AlEt₂Cl or tetraethylaluminoxane increases the molecular weight, stereoregularity, and yield of the polymer. In the presence of CS₂ a mixture of cis-PB and s-PB was obtained by using Co(octoate)₂-AlEt₂Cl-H₂O, with molar ratio H₂O/Co less than unity. In the case of H₂O/Co > 1, only cis-PB was obtained. By the addition of donor substances such as ester, ether, nitrile, and AlEt₃, s-PB was obtained even when H₂O/Co > 1. The amount and ratio of cis-PB and s-PB are dependent upon the nature and amount of the additives.     

Synthesis and characterization of soft–hard stereoblock polybutadiene with Fe(2‐EHA)3/Al(i‐Bu)3/DEP catalyst system

Stereoblock polybutadiene (PBD) composed of amorphous equibinary cis?1,4/1,2 PBD (e‐PBD, soft) and crystalline syndiotactic 1,2‐PBD (s‐1,2‐PBD, hard) segments is synthesized through one‐pot sequential polymerization with iron(III)2‐ethylhexanoate/triisobutylaluminum/diethyl phosphate [Fe(2‐EHA)₃/Al(i‐Bu)₃/DEP] catalyst system. The first‐stage polymerization of 1,3‐butadiene (BD) is carried out at a low [Al]/[Fe] ratio to give amorphous e‐PBD block, and sequentially, the in situ addition of excessive Al(i‐Bu)₃ and BD to the living polymerization system give rise to a second crystalline s‐1,2‐PBD block. The length of each block is controllable by adjusting cocatalyst and monomer feed ratio. The syndiotactic pentad content is in the range of 63.8–76.6% and increases with the length of s‐1,2‐PBD block. The copolymer exhibits glass transition temperature (T_g) around ?40 °C and melting point (T_m) around 168 °C originating from e‐PBD and s‐1,2‐PBD blocks, respectively. The incompatibility between s‐1,2‐PBD and e‐PBD blocks as well as the crystallization of s‐1,2‐PBD block induce the microphase separation in stereoblock PBD. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1182–1188     

C2‐Symmetric Zirconocenes in the Polymerization of Conjugated Diolefins

C₂‐symmetric zirconocenes activated by methylaluminoxane were utilized as catalysts in the polymerization of 1,3‐diolefins. The results indicate that the most crowded catalytic precursor rac[CH₂(3‐tert‐butyl‐1‐indenyl)₂]ZrCl₂ ( 1 ) is also the most active one, giving 1,4‐polymerization of 1,3‐butadiene and (Z)‐1,3‐pentadiene and 1,2‐polymerization of (E)‐1,3‐pentadiene and 4‐methyl‐1,3‐pentadiene. Probably, the different behavior of 1 with respect to other C₂‐symmetric zirconocenes utilized is due to the different stability of the bond between the last inserted monomer unit and the metal, as well as to the coordination of incoming monomer.     

Mimicking Ziegler‐Natta Catalysts in Homogeneous Phase, 1. C2‐Symmetric Octahedral Zr(IV) Complexes with Tetradentate [ONNO]‐Type Ligands

Results of propene polymerization in the presence of two known octahedral C₂‐symmetric Zr complexes bearing tetradentate [ONNO]‐type ligands are reported for the first time. Depending on the steric hindrance at the active metal, isotactic site‐controlled or weakly syndiotactic chain‐end‐controlled polymers were obtained, in both cases via highly regioselective 1,2 (primary) monomer insertion. In this respect, the complexes mimic the behavior of the active Ti species on the surface of the heterogeneous Ziegler‐Natta catalysts of which they might represent good structural models.     

Bis(μ‐benzene‐1,2‐dicarboxylato)bis{aqua[2‐(2‐chloro‐6‐fluorophenyl)‐1H‐imidazo[4,5‐f][1,10]phenanthroline]cadmium(II)} and its zinc(II) analogue

In the isomorphous title compounds, [Cd₂(C₈H₄O₄)₂(C₁₉H₁₀ClFN₄)₂(H₂O)₂] and [Zn₂(C₈H₄O₄)₂(C₁₉H₁₀ClFN₄)₂(H₂O)₂], the Cd^II centre is seven‐coordinated by two N atoms from one [2‐(2‐chloro‐6‐fluorophenyl)‐1H‐imidazo[4,5‐f][1,10]phenanthroline (L) ligand, one water O atom and four carboxylate O atoms from two different benzene‐1,2‐dicarboxylate (1,2‐bdc) ligands in a distorted pentagonal–bipyramidal coordination, while the Zn^II centre is six‐coordinated by two N atoms from one L ligand, one water O atom and three carboxylate O atoms from two different 1,2‐bdc ligands in a distorted octahedral coordination. Each pair of adjacent metal centres is bridged by two 1,2‐bdc ligands to form a dimeric structure. In the dimer, each L ligand coordinates one metal centre. The dimer is centrosymmetric, with a crystallographic inversion centre midway between the two metal centres. The aromatic interactions lead the dimers to form a two‐dimensional supramolecular architecture. Finally, O—H...O and N—H...O hydrogen bonds reinforce the two‐dimensional structures of the two compounds.     

Kinetic studies of polymerization of propylene with active TiCl3–Zn(C2H5)2

In order to elucidate the structure of the Ziegler-Natta polymerization center, we have carried out some kinetic studies on the polymerization of propylene with active TiCl₃—Zn(C₂H₅)₂ in the temperature range of 25–56°C. and the Zn(C₂H₅)₂ concentration range of 4 × 10^?3–8 × 10^?2 mole/1., and compared the results with those obtained with active TiCl₃—Al(C₂H₅)₃. The following differences were found: (1) the activation energy of the stationary rate of polymerization is 6.5 kcal/mole with Zn(C₂H₅)₂ and 13.8 kcal./mole with Al(C₂H₅)₃; (2) the growth rate of the polymer chains with Zn(C₂H₅)₂ is about times slower at 43.5°C.; and (3) the polymerization centers formed with Zn(C₂H₅)₂ are more unstable. It can be concluded that the structure of the polymerization center with Zn(C₂H₅)₂ is different from that with Al(C₂H₅)₃.     

Mixed cobalt(III) complexes with aromatic amino acids and di­amines. III.

The title compound, [Co(C₉H₁₀NO₃)₂(C₂H₈N₂)]Cl·4H₂O, is one of six possible diastereomers of the (1,2‐di­amino­ethane)­bis(S‐tyrosinato)­cobalt(III) complex. The cobalt(III) ion has an octahedral coordination, with three five‐membered chelate rings which have deformed coordination angles and coordinated O atoms in trans positions. In comparison with the previously reported crystal structure of the Δ‐C₁‐cis(O) diastereomer [Miodragovi?et al. (2001). Enantiomer, 6 , 299–308], the compound presented in this paper has more planar five‐membered amino­carboxyl­ate rings. Complex cations, chloride anions and water mol­ecules of crystallization are linked together by a network of hydrogen bonds. The chloride anions lie approximately between two Co atoms and form hydrogen bonds with all coordinated NH₂ groups. In the crystal structure, there is a weak intermolecular π?π interaction between the phenyl rings.     

The nature of active sites and stereospecificity of their action in diene polymerization catalysed by chromium-containing systems

A study has been made of the nature of active sites, stereospecificity of their action and the regularities of diene polymerization catalysed by chromium-containing systems. All possible polymer structures with high stereospecificity can be produced for butadiene and isoprene with π-allyl chromium compounds. Tris-π-allyl chromium produces polybutadiene predominantly of 1,2-units. Cis-polybutadiene is formed when the electronegative group (Cl^?, CCl₃COO^?) is substituted for one or two π-allyl groups in Tris-allyl chromium or in the catalytic system (π-C₃H₅)₃CrAl₂O₃. A catalyst obtained through interaction of (π-C₃H₅)₃Cr with silica-alumina or silica gel produces 1,4-trans-polybutadiene and 1,4-trans-polyisoprene. The rate of butadiene polymerization in the presence of Tris-π-allyl chromium is given by k[Cr]², and in polymerization of isoprene with the catalytic system (π-C₃H₅)₃Cr-silica-alumina, by k[Cr].[M]². Polymerization of dienes catalysed by (π-C₃H₅)₃Cr-silica-alumina system or supported chromium oxide catalyst proceeds according to a type of living system. A study was made of copolymerization of butadiene and isoprene in the presence of supported chromium oxide catalyst and with that produced by the reaction of (π-C₃H₅)₃Cr with silica-alumina. The constants of copolymerization for the systems were equal. A conclusion has been drawn regarding the similar mechanisms for diene polymerization under the action of supported chromium oxide catalyst or of catalyst formed in the reaction of (π-C₃H₅)₃Cr with silica-alumina or silica gel.     

Poly[diaqua(μ4‐benzene‐1,2‐dicarboxylato)(isonicotinato‐κ2O,O′)gadolinium(III)]

The title neutral polymer, [Gd(C₆H₄NO₂)(C₈H₄O₄)(H₂O)₂]_n, contains an extended two‐dimensional wave‐like lanthanide carboxylate layer decorated by isonicotinate (IN) ligands. The Gd^II atom is eight‐coordinated by four carboxylate O atoms from four benzene‐1,2‐dicarboxylate (1,2‐bdc) ligands, two 1,2‐bdc carboxylate O atoms from one chelating IN ligand and two terminal water molecules, forming a bicapped trigonal–prismatic coordination geometry. The wave‐like layers are stacked in an …ABAB… packing mode along the c‐axis direction. Strong hydrogen‐bonding interactions further stabilize the structure of the title compound.     

A fourfold interpenetrating diamondoid three‐dimensional coordination polymer: poly[[[μ2‐1,2‐bis(pyridin‐4‐yl)ethene‐κ2N:N′](μ2‐5‐hydroxyisophthalato‐κ2O1:O3)zinc(II)] 1,2‐bis(pyridin‐4‐yl)ethene hemisolvate]

In the title compound, {[Zn(C₈H₄O₅)(C₁₂H₁₀N₂)]·0.5C₁₂H₁₀N₂}_n or {[Zn(HO‐BDC)(bpe)]·0.5bpe}_n [HO‐H₂BDC is 5‐hydroxyisophthalic acid and bpe is 1,2‐bis(pyridin‐4‐yl)ethene], the asymmetric unit contains a Zn^II atom, one HO‐BDC ligand, one coordinated bpe ligand and half a noncoordinating bpe molecule with crystallographic inversion symmetry. Each Zn^II centre is four‐coordinated by two O atoms from two distinct HO‐BDC ligands and two N atoms from two different bpe ligands in a ZnO₂N₂ coordination environment. The three‐dimensional topology of the title compound corresponds to a fourfold interpenetrating diamondoid coordination polymer network, with the uncoordinated bpe ligands located in the cavities, hydrogen bonded to the main network via the hydroxy group of the HO‐H₂BDC ligand.     

A lutetium allyl complex that bears a pyridyl-functionalized cyclopentadienyl ligand: dual catalysis on highly syndiospecific and cis-1,4-selective (co)polymerizations of styrene and butadiene

A novel linked‐half‐sandwich lutetium–bis(allyl) complex [(C₅Me₄? C₅H₄N)Lu(η³‐C₃H₅)₂] ( 1 ) attached by a pyridyl‐functionalized cyclopentadienyl ligand was synthesized and fully characterized. Complex 1 in combination with [Ph₃C][B(C₆F₅)₄] exhibited unprecedented dual catalysis with outstanding activities in highly syndiotactic (rrrr>99 %) styrene polymerization and distinguished cis‐1,4‐selective (99 %) butadiene polymerization, respectively. Strikingly, this catalyst system exhibited remarkable activity (396 kg copolymer (mol_Lu h)^?1) for the copolymerization of butadiene and styrene. Irrespective of whether the monomers were fed in concurrent mode or sequential addition of butadiene followed by styrene, diblock copolymers were obtained exclusively, which was confirmed by a kinetics investigation of monomer conversion of copolymerization with time. In the copolymers, the styrene incorporation rate varied from 4.7 to 85.4 mol %, whereas the polybutadiene (PBD) block was highly cis‐1,4‐regulated (95 %) and the polystyrene segment remained purely syndiotactic (rrrr>99 %). Correspondingly, the copolymers exhibited glass transition temperatures (T_g) around ?107 °C and melting points (T_m) around 268 °C; typical values for diblock microstructures. Such copolymers cannot be accessed by any other methods known to date. X‐ray powder diffraction analysis of these diblock copolymers showed that the crystallizable syndiotactic polystyrene (syn‐PS) block was in the toluene δ clathrate form. The AFM micrographs of diblock copolymer showed a remarkable phase‐separation morphology of the cis‐1,4‐PBD block and syn‐PS block. This represents the first example of a lutetium‐based catalyst showing both high activity and selectivity for the (co)polymerization of styrene and butadiene.     

Two saccharinate complexes: [Mn(phen)2(sac)(H2O)]+·sac– and [Co(bipy)2(sac)(H2O)]+·sac–

The title saccharinate complexes, aqua[1,2‐benzisothiazol‐3(2H)‐onato 1,1‐dioxide‐N]bis(1,10‐phenanthroline‐N,N′)man­ganese(II) 1,2‐benz­isothia­zol‐3(2H)‐onate 1,1‐dioxide,[Mn(C₇H₄NO₃S)(C₁₂H₈N₂)₂(H₂O)](C₇H₄NO₃S), and aqua[1,2‐benz­iso­thiazol‐3(2H)‐onato 1,1‐dioxide‐N]­bis­(2,2′‐bi­pyri­dine‐N,N′)­cobalt(II) 1,2‐benz­iso­thia­zol‐3(2H)‐onate 1,1‐di­oxide, [Co­(C₇H₄NO₃S)­(C₁₀H₈N₂)₂­(H₂O)]­(C₇H₄NO₃S), have been prepared and their crystal structures determined at 150 K. The structure of the manganese complex consists of repeated alternating [Mn(phen)₂(sac)(H₂O)]⁺ cations and non‐coordinated saccharinate anions. The water molecule, bound to manganese as part of a slightly distorted octahedral arrangement, is hydrogen bonded to an O atom of the SO₂ group in the saccharinate counter‐ion. In contrast, the cobalt complex has one pseudo‐octahedral [Co(bipy)₂(sac)(H₂O)]⁺ cation, with the cobalt‐bound water molecule hydrogen bonded to the N atom of the accompanying free saccharinate anion.     

Concerted coordination and hydrogen‐bonding network of the 1,4‐di‐4‐pyrid­yl‐2,3‐diaza‐1,3‐butadiene [Zn(MeOH)2(H2O)2](ClO4)2 3:1 complex

In the title compound, diaqua­bis(1,4‐di‐4‐pyrid­yl‐2,3‐diaza‐1,3‐butadiene)dimethanolzinc(II) bis­(perchlorate) 1,4‐di‐4‐pyrid­yl‐2,3‐diaza‐1,3‐butadiene methanol 1.72‐solvate 1.28‐hydrate, [Zn(C₁₂H₁₀N₄)₂(CH₄O)₂(H₂O)₂](ClO₄)₂·C₁₂H₁₀N₄·1.72CH₄O·1.28H₂O, determined at ca 110 K, the Zn cation and the extended dipyridyl ligand both lie across inversion centres in space group P. The structure consists of a network arrangement of the constituent species stabilized by a combination of coordination, hydrogen bonding and π–π forces. Uncoordinated methanol and water solvent mol­ecules occupy the otherwise void spaces within and between the networks.     

Hydrogen bonding and π–π interactions in the cocrystal salt [Fe(bpe)2(H2O)4](TCEP)2·2(bpe) [bpe is trans‐1,2‐bis(pyridin‐4‐yl)ethene and TCEP is 1,1,3,3‐tetracyano‐2‐ethoxypropenide]

The cocrystal salt tetraaquabis[trans‐1,2‐bis(pyridin‐4‐yl)ethene‐κN]iron(II) bis(1,1,3,3‐tetracyano‐2‐ethoxypropenide)–trans‐1,2‐bis(pyridin‐4‐yl)ethene (1/2), [Fe(C₁₂H₁₀N₂)₂(H₂O)₄](C₉H₅N₄O)₂·2C₁₂H₁₀N₂, is a rare example of a mononuclear Fe^II compound with trans‐1,2‐bis(pyridin‐4‐yl)ethane (bpe) ligands. The complex cation resides on a crystallographically imposed inversion center and exhibits a tetragonally distorted octahedral coordination geometry. Both the symmetry‐independent bpe ligand and the cocrystallized bpe molecule are essentially planar. The 1,1,3,3‐tetracyano‐2‐ethoxypropenide counter‐ion is nonplanar and the bond lengths are consistant with significant electron delocalization. The extended structure exhibits an extensive O—H…N hydrogen‐bonding network with layers of complex cations joined by the cocrystallized bpe. Both the coordinated and the cocrystallized bpe are involved in π–π interactions. Hirshfeld and fingerprint plots reveal the important intermolecular interactions. Density functional theory was used to estimate the strengths of the hydrogen‐bonding and π–π interactions, and suggest that the O—H…N hydrogen bonds enhance the strength of the π‐interactions by increasing the polarization of the pyridine rings.     

The structure of {[Co(pht)(bpy)(H2O)]·3H2O}n (pht is phthalate and bpy is 4,4′‐bipyridine) and the role of solvent water clusters in structure stability

The Co^II cation in poly[[aqua(μ‐benzene‐1,2‐dicarboxylato‐κ³O¹,O²:O¹)(μ‐4,4′‐bipyridine‐κ²N:N′)cobalt(II)] trihydrate], {[Co(C₈H₄O₄)(C₁₀H₈N₂)(H₂O)]·3H₂O}_n, is octahedrally coordinated by two N atoms of two 4,4′‐bipyridine ligands, three O atoms from phthalate anions and a fourth O atom from a coordinated water molecule. The packing consists of planes of coordination polymers linked by hydrogen bonds mediated by three solvent water molecules; the linkage is achieved by the water molecules forming intricate oligomeric clusters which also involve the O atoms of the phthalate ligands.     

Synthesis,Structural Characterization and Thermal Stability of [Mn(3‐bpd)2(NCS)2(H2O)2]·2H2O (1) and {[Mn(bpe)(NCS)2(H2O)2]·(3‐bpd)·(bpe)·H2O}n (2) from One‐Pot Crystallization

Two supramolecular architectures, [Mn(3‐bpd)₂(NCS)₂(H₂O)₂]·2H₂O ( 1 ) and {[Mn(bpe)(NCS)₂(H₂O)₂]·(3‐bpd)·(bpe)·H₂O}_n ( 2 ) [bpe = 1,2‐bis(4‐pyridyl)ethylene and 3‐bpd = 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene] have been synthesized and characterized by spectroscopic, elemental and single crystal X‐ray diffraction analyses. Compound 1 crystallizes in the monoclinic system, space group P2₁/c, with chemical formula C₂₆H₂₈Mn N₁₀O₄S₂, a = 9.1360(6), b = 9.7490(6), c = 17.776(1) Å, β = 93.212(1)°, and Z = 2 while compound 2 crystallizes in the orthorhombic system, space group P2₁2₁2₁, with chemical formula C₃₈H₃₆Mn₁N₁₀O₃S₂, a = 14.1902(6), b = 15.4569(7), c = 18.2838(8) Å, α = β = γ = 90°, and Z = 4. Structural determination reveals that the coordination geometry at Mn(II) in compound 1 or 2 is a distorted octahedral which consists of two nitrogen donors of two NCS^?ligands, two oxygen donors of two water molecules, and two nitrogen donors of two 3‐bpd ligands for 1 and two dpe ligands for 2 , respectively. The two 3‐bpd ligands in 1 adopt a monodentate binding mode and the dpe in 2 adopts a bismonodentate bridging mode to connect the Mn(II) ions forming a 1D chain‐like coordination polymer. Both the π‐π stacking interactions between the coordinated and the free pyridyl‐based ligands and intermolecular hydrogen bonds among the coordinated and the crystallized water molecules and the free pyridyl‐based ligands play an important role in construction of these 3D supramolecular architectures.     

Novel nickel (II) complexes chelating β‐diketiminate ligands: synthesis and simultaneous polymerization and oligomerization of ethylene

Two novel nickel (II) complexes, CH{C(CF₃)NAr}₂NiBr ( 1 , Ar = 2,6‐ⁱPr₂C₆H₃ and 2 , 2,6‐Me₂C₆H₃), were synthesized by the reaction of the lithium salt of fluorinated β‐diketiminate backbone ligands with (1,2‐dimethoxyethane) nickel (II) bromide [(DME)NiBr₂]. The solid‐state structure of nickel (II) complex 2 as a dimer reveals four‐coordination and a tetrahedral geometry with bromide bridged by single crystal X‐ray measurement. Both complexes catalyze simultaneous polymerization and oligomerization of ethylene when activated by methylaluminoxane (MAO). It was found that the reaction temperature has a pronounced effect on the activity of ethylene polymerization and the molecular weight of obtained polyethylene. In addition, the nickel catalytic systems predominantly produce linear polyethylene with unsaturated end groups. Copyright © 2006 John Wiley & Sons, Ltd.     

Poly[aqua(μ3‐benzene‐1,2‐dicarboxylato)bis(μ3‐hydroxido)bis(μ2‐isonicotinato)dierbium(III) monohydrate] and the thulium analogue

The two isomorphous lanthanide coordination polymers, {[Ln₂(C₆H₄NO₂)₂(C₈H₄O₄)(OH)₂(H₂O)]·H₂O}_n (Ln = Er and Tm), contain two crystallographically independent Ln ions which are both eight‐coordinated by O atoms, but with quite different coordination environments. In both crystal structures, adjacent Ln atoms are bridged by μ₃‐OH groups and carboxylate groups of isonicotinate and benzene‐1,2‐dicarboxylate ligands, forming infinite chains in which the Er...Er and Tm...Tm distances are in the ranges 3.622 (3)–3.894 (4) and 3.599 (7)–3.873 (1) Å, respectively. Adjacent chains are further connected through hydrogen bonds and π–π interactions into a three‐dimensional supramolecular framework.