Synthesis of an elusive,stable 2-azaallyl radical guided by electrochemical and reactivity studies of 2-azaallyl anions

The super electron donor (SED) ability of 2-azaallyl anions has recently been discovered and applied to diverse reactivity, including transition metal-free cross-coupling and dehydrogenative cross-coupling processes. Surprisingly, the redox properties of 2-azaallyl anions and radicals have been rarely studied. Understanding the chemistry of elusive species is the key to further development. Electrochemical analysis of phenyl substituted 2-azaallyl anions revealed an oxidation wave at E_1/2 or E_pa = −1.6 V versus Fc/Fc⁺, which is ∼800 mV less than the reduction potential predicted (E_pa = −2.4 V vs. Fc/Fc⁺) based on reactivity studies. Investigation of the kinetics of electron transfer revealed reorganization energies an order of magnitude lower than commonly employed SEDs. The electrochemical study enabled the synthetic design of the first stable, acyclic 2-azaallyl radical. These results indicate that the reorganization energy should be an important design consideration for the development of more potent organic reductants.

The super electron donor (SED) capabilities of 2-azaallyl anions has recently been discovered and applied to diverse reactivity; their structures and electron transfer characteristics are reported herein.     

Semiquinone radical-bridged M2 (M = Fe,Co, Ni) complexes with strong magnetic exchange giving rise to slow magnetic relaxation

The use of radical bridging ligands to facilitate strong magnetic exchange between paramagnetic metal centers represents a key step toward the realization of single-molecule magnets with high operating temperatures. Moreover, bridging ligands that allow the incorporation of high-anisotropy metal ions are particularly advantageous. Toward these ends, we report the synthesis and detailed characterization of the dinuclear hydroquinone-bridged complexes [(Me₆tren)₂M^II₂(C₆H₄O₂²⁻)]²⁺ (Me₆tren = tris(2-dimethylaminoethyl)amine; M = Fe, Co, Ni) and their one-electron-oxidized, semiquinone-bridged analogues [(Me₆tren)₂M^II₂(C₆H₄O₂⁻˙)]³⁺. Single-crystal X-ray diffraction shows that the Me₆tren ligand restrains the metal centers in a trigonal bipyramidal geometry, and coordination of the bridging hydro- or semiquinone ligand results in a parallel alignment of the three-fold axes. We quantify the p-benzosemiquinone–transition metal magnetic exchange coupling for the first time and find that the nickel(ii) complex exhibits a substantial J < −600 cm⁻¹, resulting in a well-isolated S = 3/2 ground state even as high as 300 K. The iron and cobalt complexes feature metal–semiquinone exchange constants of J = −144(1) and −252(2) cm⁻¹, respectively, which are substantially larger in magnitude than those reported for related bis(bidentate) semiquinoid complexes. Finally, the semiquinone-bridged cobalt and nickel complexes exhibit field-induced slow magnetic relaxation, with relaxation barriers of U_eff = 22 and 46 cm⁻¹, respectively. Remarkably, the Orbach relaxation observed for the Ni complex is in stark contrast to the fast processes that dominate relaxation in related mononuclear Ni^II complexes, thus demonstrating that strong magnetic coupling can engender slow magnetic relaxation.

A semiquinone radical bridging two trigonal bipyramidal metal centers facilitates strong magnetic exchange and single-molecule magnet behavior.     

Dinuclear Lanthanide(III) Complexes from the Use of Methyl 2-Pyridyl Ketoxime: Synthetic,Structural, and Physical Studies

The first use of methyl 2-pyridyl ketoxime (mepaoH) in homometallic lanthanide(III) [Ln(III)] chemistry is described. The 1:2 reactions of Ln(NO₃)₃·nH₂O (Ln = Nd, Eu, Gd, Tb, Dy; n = 5, 6) and mepaoH in MeCN have provided access to complexes [Ln₂(O₂CMe)₄(NO₃)₂(mepaoH)₂] (Ln = Nd, 1; Ln = Eu, 2; Ln = Gd, 3; Ln = Tb, 4; Ln = Dy, 5); the acetato ligands derive from the Ln^III—mediated hydrolysis of MeCN. The 1:1 and 1:2 reactions between Dy(O₂CMe)₃·4H₂O and mepaoH in MeOH/MeCN led to the all-acetato complex [Dy₂(O₂CMe)₆(mepaoH)₂] (6). Treatment of 6 with one equivalent of HNO₃ gave 5. The structures of 1, 5, and 6 were solved by single-crystal X-ray crystallography. Elemental analyses and IR spectroscopy provide strong evidence that 2–4 display similar structural characteristics with 1 and 5. The structures of 1–5 consist of dinuclear molecules in which the two Ln^III centers are bridged by two bidentate bridging (η¹:η¹:μ₂) and two chelating-bridging (η¹:η²:μ₂) acetate groups. The Ln^III atoms are each chelated by a N,N’-bidentate mepaoH ligand and a near-symmetrical bidentate nitrato group. The molecular structure of 6 is similar to that of 5, the main difference being the presence of two chelating acetato groups in the former instead of the two chelating nitrato groups in the latter. The geometry of the 9-coordinate Ln^III centers in 1, 5 and 6 can be best described as a muffin-type (MFF-9). The 3D lattices of the isomorphous 1 and 5 are built through H-bonding, π⋯π stacking and C-H⋯π interactions, while the 3D architecture of 6 is stabilized by H bonds. The IR spectra of the complexes are discussed in terms of the coordination modes of the organic and inorganic ligands involved. The Eu(III) complex 2 displays a red, metal-ion centered emission in the solid state; the Tb^III atom in solid 4 emits light in the same region with the ligand. Magnetic susceptibility studies in the 2.0–300 K range reveal weak antiferromagnetic intramolecular Gd^III…Gd^III exchange interactions in 3; the J value is −0.09(1) cm⁻¹ based on the spin Hamiltonian Ĥ = −J(Ŝ_Gd1·Ŝ_Gd2).     

Supertetrahedral polyanionic network in the first lithium phosphidoindate Li3InP2 – structural similarity to Li2SiP2 and Li2GeP2 and dissimilarity to Li3AlP2 and Li3GaP2

Phosphide-based materials have been investigated as promising candidates for solid electrolytes, among which the recently reported Li₉AlP₄ displays an ionic conductivity of 3 mS cm⁻¹. While the phases Li–Al–P and Li–Ga–P have already been investigated, no ternary indium-based phosphide has been reported up to now. Here, we describe the synthesis and characterization of the first lithium phosphidoindate Li₃InP₂, which is easily accessible via ball milling of the elements and subsequent annealing. Li₃InP₂ crystallizes in the tetragonal space group I4₁/acd with lattice parameters of a = 12.0007(2) and c = 23.917(5) Å, featuring a supertetrahedral polyanionic framework of interconnected InP₄ tetrahedra. All lithium atoms occupy tetrahedral voids with no partial occupation. Remarkably, Li₃InP₂ is not isotypic to the previously reported homologues Li₃AlP₂ and Li₃GaP₂, which both crystallize in the space group Cmce and feature 2D layers of connected tetrahedra but no supertetrahedral framework. DFT computations support the observed stability of Li₃InP₂. A detailed geometrical analysis leads to a more general insight into the structural factors governing lithium ion mobility in phosphide-based materials: in the non-ionic conducting Li₃InP₂ the Li ions exclusively occupy tetrahedral voids in the distorted close packing of P atoms, whereas partially filled octahedral voids are present in the moderate ionic conductors Li₂SiP₂ and Li₂GeP₂.

Li₃InP₂ exhibits a polyanionic framework of corner-sharing InP₄ tetrahedra and DFT computations reveal the stability trend for indium in the tetragonal structure compared to the orthorhombic structure of the lighter homologues.     

Nitric oxide monooxygenation (NOM) reaction of cobalt-nitrosyl {Co(NO)}8 to CoII-nitrito {CoII(NO2−)}: base induced hydrogen gas (H2) evolution

Here, we report the nitric oxide monooxygenation (NOM) reactions of a Co^III-nitrosyl complex (1, {Co-NO}⁸) in the presence of mono-oxygen reactive species, i.e., a base (OH⁻, tetrabutylammonium hydroxide (TBAOH) or NaOH/15-crown-5), an oxide (O²⁻ or Na₂O/15-crown-5) and water (H₂O). The reaction of 1 with OH⁻ produces a Co^II-nitrito complex {3, (Co^II-NO₂⁻)} and hydrogen gas (H₂), via the formation of a putative N-bound Co-nitrous acid intermediate (2, {Co-NOOH}⁺). The homolytic cleavage of the O–H bond of proposed [Co-NOOH]⁺ releases H₂via a presumed Co^III-H intermediate. In another reaction, 1 generates Co^II-NO₂⁻ when reacted with O²⁻via an expected Co^I-nitro (4) intermediate. However, complex 1 is found to be unreactive towards H₂O. Mechanistic investigations using ¹⁵N-labeled-¹⁵NO and ²H-labeled-NaO²H (NaOD) evidently revealed that the N-atom in Co^II-NO₂⁻ and the H-atom in H₂ gas are derived from the nitrosyl ligand and OH⁻ moiety, respectively.

Base-induced hydrogen (H₂) gas evolution in the nitric oxide monoxygenation reaction.

As a radical species, nitric oxide (NO) has attracted great interest from the scientific community due to its major role in various physiological processes such as neurotransmission, vascular regulation, platelet disaggregation and immune responses to multiple infections.¹ Nitric oxide synthase (NOS),² and nitrite reductase (NiR)³ enzymes are involved in the biosynthesis of NO. NOSs produce NO by the oxidation of the guanidine nitrogen in l-arginine.⁴ However, in mammals and bacteria, NO₂⁻ is reduced to NO by NiRs in the presence of protons, i.e., NO₂⁻ + e⁻ + 2H⁺ → NO + H₂O.⁵ Biological dysfunctions may cause overproduction of NO, and being radical it leads to the generation of reactive nitrogen species (RNS), i.e., peroxynitrite (PN, OONO⁻)⁶ and nitrogen dioxide (˙NO₂),⁷ upon reaction with reactive oxygen species (ROS) such as superoxide (O₂˙⁻),⁸ peroxide (H₂O₂),⁹ and dioxygen (O₂).¹⁰ Hence, it is essential to maintain an optimal level of NO. In this regard, nitric oxide dioxygenases (NODs)¹¹ are available in bio-systems to convert excess NO to biologically benign nitrate (NO₃⁻).¹²NO₂⁻ + Fe^II + H⁺ ↔ NO + Fe^III + OH⁻1[M–NO]ⁿ + 2OH⁻ → [M–NO₂]⁽ⁿ⁻²⁾ + H₂O2NOD enzymes generate NO₃⁻ from NO;^11b,12−13 however, the formation of NO₂⁻ from NO is still under investigation. Clarkson and Bosolo reported NO₂⁻ formation in the reaction of Co^III-NO and O₂.¹⁴ Nam and co-workers showed the generation of Co^II-NO₂⁻ from Co^III-NO upon reaction with O₂˙⁻.¹⁵ Recently, Mondal and co-workers reported NO₂⁻ formation in the reaction of Co^II-NO with O₂.¹⁶ Apart from cobalt, the formation of Cu^II-NO₂⁻ was also observed in the reaction of Cu^I-NO and O₂.¹⁷ For metal-dioxygen adducts, i.e., Cr^III-O₂˙⁻ and Mn^IV-O₂²⁻, NOD reactions led to the generation of Cr^III-NO₂⁻ (ref. 18) and Mn^V O + NO₂⁻,¹⁹ respectively. However, the NOD reaction of Fe^III-O₂˙⁻ and Fe^III-O₂²⁻ with NO and NO⁺, respectively, generated Fe^III-NO₃⁻via Fe^IV O and ˙NO₂.²⁰ Ford suggested that the reaction of ferric-heme nitrosyl with hydroxide leads to the formation of NO₂⁻ and H⁺.¹² Lehnert and co-workers reported heme-based Fe-nitrosyl complexes²¹ showing different chemistries due to the Fe^II-NO⁺ type electronic structures. On the other hand, Bryan proposed that the one-electron reduction of NO₂⁻ to NO in ferrous heme protein is reversible (eqn (1)).²² Also, it is proposed that excess NO in biological systems is converted to NO₂⁻ and produces one equivalent of H⁺ upon reaction with ˙OH.²³ Previously reported reactivity of M–NOs of Fe²⁴ with OH⁻ suggested the formation of NO₂⁻ and one equivalent of H⁺, where H⁺ further reacts with one equivalent of OH⁻ and produces H₂O (eqn (2)).²⁵Here in this report, we explore the mechanistic aspects of nitric oxide monooxygenation (NOM) reactions of the Co^III-nitrosyl complex, [(12TMC)Co^III(NO⁻)]²⁺/{Co(NO)}⁸ (1),^15,26 bearing the 12TMC ligand (12TMC = 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecane) with mono-oxygen reactive species (O²⁻, OH⁻ and H₂O) (Scheme 1). Complex 1 reacts with the base (OH⁻, tetrabutylammonium hydroxide (TBAOH)/or NaOH in the presence of 15-crown-5 as the OH⁻ source) and generates the corresponding Co^II-nitrito complex, [(12TMC)Co^II(NO₂⁻)]⁺ (3), with the evolution of hydrogen gas (H₂) via the formation of a plausible N-bound Co-nitrous acid intermediate ([Co-NOOH]⁺, 2) in CH₃CN at 273 K (Scheme 1, reaction (I)). Also, when 1 reacts with the oxide (O²⁻ or Na₂O in the presence of 15-crown-5), it generates the Co^II-nitrito complex (3) via a probable Co^I-nitro, [(12TMC)Co^I(NO₂⁻)] (4), intermediate (Scheme 1, reaction (II)); however, 1 does not react with water (Scheme 1, reaction (III)). Mechanistic investigations using ¹⁵N-labeled-¹⁵NO, D-labeled-NaOD and ¹⁸O-labelled-¹⁸OH⁻ demonstrated, unambiguously, that the N and O-atoms in the NO₂⁻ ligand of 3 resulted from NO and OH⁻ moieties; however, the H-atoms of H₂ are derived from OH⁻. To the extent of our knowledge, the present work reports the very first systematic study of Co^III-nitrosyl complex reactions with H₂O, OH⁻ and O²⁻. This new finding presents an alternative route for NO₂⁻ generation in biosystems, and also illustrates a new pathway of H₂ evolution, in addition to the reported literature.^12,27Open in a separate windowScheme 1Nitric oxide monooxygenation (NOM) reactions of cobalt-nitrosyl complex (1) in the presence of a base (OH⁻), sodium oxide (Na₂O) and water (H₂O).To further explore the chemistry of [(12TMC)Co^III(NO⁻)]²⁺ (1),^15,26 and the mechanistic insights of NOM reactions, we have reacted it with a base (OH⁻), an oxide (O²⁻), and water (H₂O). When complex 1 was reacted with TBAOH in CH₃CN, the color of complex 1 changed to light pink from dark pink. In this reaction, the characteristic absorption band of 1 (370 nm) disappears within 2 minutes (Fig. 1a; ESI, Experimental section (ES) and Fig. S1a^†), producing a Co^II-nitrito complex, [(12TMC)Co^II(NO₂⁻)]⁺ (3), with H₂ (Scheme 1, reaction (Ib)), in contrast to the previous reports on base induced NOM reactions (eqn (2)).^12,25,28 The spectral titration data confirmed that the ratio-metric equivalent of OH⁻ to 1 was 1 : 1 (ESI, Fig. S1b^†). 3 was determined to be [(12TMC)Co^II(NO₂⁻)](BF₄) based on various spectroscopic and structural characterization experiments (vide infra).^15,26bOpen in a separate windowFig. 1(a) UV-vis spectral changes of 1 (0.50 mM, black line) upon addition of OH⁻ (1 equiv.) in CH₃CN under Ar at 273 K. Black line (1) changed to red line (3) upon addition of OH⁻. Inset: IR spectra of 3-¹⁴NO₂⁻ (blue line) and 3-¹⁵NO₂⁻ (red line) in KBr. (b) ESI-MS spectra of 3. The peak at 333.2 is assigned to [(12TMC)Co^II(NO₂)]⁺ (calcd m/z 333.1). Inset: isotopic distribution pattern for 3-¹⁴NO₂⁻ (red line) and 3-¹⁵NO₂⁻ (blue line).The FT-IR spectrum of 3 showed a characteristic peak for nitrite stretching at 1271 cm⁻¹ (Co^II-14NO₂⁻) and shifted to 1245 cm⁻¹ (Co^II-15NO₂⁻) when 3 was prepared by reacting ¹⁵N-labeled NO (Co^III-15NO) with OH⁻ (Inset, Fig. 1a and Fig. S2^†). The shifting of NO₂⁻ stretching (Δ = 30 cm⁻¹) indicates that the N-atom in the NO₂⁻ ligand is derived from Co^III-15NO. The ESI-MS spectrum of 3 showed a prominent peak at m/z 333.2, [(12TMC)Co^II(¹⁴NO₂⁻)]⁺ (calcd m/z 333.2), which shifted to 334.2, [(12TMC)Co^II(¹⁵NO₂⁻)]⁺ (calcd m/z 334.2), when the reaction was performed with Co^III-15NO (Inset, Fig. 1b; ESI, Fig. S3a^†); indicating clearly that NO₂⁻ in 3 was derived from the NO moiety of 1. In addition, we have reacted 1 with Na¹⁸OH (ES and ESI^†), in order to follow the source of the second O-atom in 3-NO₂⁻. The ESI-MS spectrum of the reaction mixture, obtained by reacting 1 with Na¹⁸OH, showed a prominent peak at m/z 335.2, [(12TMC)Co^II(¹⁸ONO⁻)]⁺ (calcd m/z 335.2), (SI, Fig. S3b^†) indicating clearly that NO₂⁻ in 3 was derived from ¹⁸OH⁻. The ¹H NMR spectrum of 3 did not show any signal for aliphatic protons of the 12TMC ligand, suggesting a bivalent cobalt center (Fig. S4^†).^26b Furthermore, we have determined the magnetic moment of 3, using Evans'' method, and it was found to be 4.62 BM, suggesting a high spin Co(ii) metal center with three unpaired electrons (ESI^† and ES).²⁹ The exact conformation of 3 was provided by single-crystal X-ray crystallographic analysis (Fig. 2b, ESI, ES, Fig. S5, and Tables T1 and T2^†) and similar to that of previously reported Co^II-NO₂⁻/M^II-NO₂⁻.^15,26b Also, we have quantified the amount of nitrite (90 ± 5%), formed in the above reaction, using the Griess reagent (ESI, ES, and Fig. S6^†).Open in a separate windowFig. 2Displacement ellipsoid plot (20% probability) of 3 at 100 K. Disordered C-atoms of the TMC ring, anion and H-atoms have been removed for clarity.As is known from the literature, a metal-nitrous acid intermediate may form either by the reaction of a metal-nitrosyl with a base²⁷ or by the metal-nitrite reaction with an acid (nitrite reduction chemistry);^26b however, the products of both the reactions are different. Here, for the first time, we have explored the reaction of Co^III-nitrosyl (1) with a base. In this reaction, it is clear that the formation of Co^II-nitrito would be accomplished by the release of H₂ gas via the generation of a transient N-bound [Co-(NOOH)]⁺ intermediate (Scheme 2, reaction (II)). The formation of Co^II-NO₂⁻ (3) from the [Co-(NOOH)]⁺ intermediate is likely to proceed by either (i) homolytic cleavage of the O–H bond and release of H₂via the proposed Co^III-H transient species (Co^III-H = Co^II + 1/2H₂)³⁰ (Scheme 2, reaction (III)), as reported in previous literature where the reduced cobalt, in a number of different ligand environments, is a good H⁺ reduction catalyst and generates H₂ gas via a Co^III-H intermediate³¹ or (ii) heterolytic cleavage of the O–H bond and the formation of Co^I-NO₂⁻ + H⁺.²⁷ In the present study, we observed the formation of 3 and H₂via the plausible homolytic cleavage of the NOO–H moiety of 2 as shown in Scheme 2, in contrast to the previous reports on base-induced reactions on metal-nitrosyls (eqn (3)).²⁷ Taking together both possibilities, (i) is the most reasonable pathway for the NOM reaction of complex 1 in the presence of a base (as shown in Scheme 2, reaction (III)). And the reaction is believed to go through a Co^III-H intermediate as reported previously in Co^I-induced H⁺ reduction in different ligand frameworks and based on literature precedence, we believe that complex 1 acts in a similar manner.³¹Open in a separate windowScheme 2NOM reaction of complex 1 in the presence of OH⁻, showing the generation of Co^II-nitrito (3) and H₂via a Co(iii)-hydrido intermediate.In contrast to an O-bound Co^II-ONOH intermediate, where N–O bond homolysis of the ON-OH moiety generates H₂O₂ (Scheme 2, reaction (IV)),^26b the N-bound [Co-(NOOH)]⁺ intermediate decomposes to form NO₂⁻ and a Co(iii)-H transient species, arising from β-hydrogen transfer from the NOO–H moiety to the cobalt-center (Scheme 2, reaction (II)).^30a,c,32 The Co(iii)-hydrido species may generate H₂ gas either (a) by its transformation to the Co(ii)-nitrito complex (2) and H₂ gas as observed in the case of Co^III-H intermediate chemistry^30a,c,e−g as proposed in the chemistry of the Co^I complex with H⁺ reduction³¹ and other metal-hydrido intermediates³² and also explained in O₂ formation in PN chemistry^17,33 or (b) by the reacting with another [Co-(NOOH)]⁺ intermediate (Scheme 2, reaction (III)).Furthermore, we have confirmed the H₂ formation in the NOM reaction of 1 with OH⁻ by headspace gas mass spectrometry (Fig. 3a). Also, carrying out the reaction of 1 with NaOD leads to the formation of the [Co-(NOOD)]⁺ intermediate, which then transforms to a Co^III-D transient species. Further, as described above, the Co^III-D species releases D₂ gas, detected by headspace gas mass spectrometry (Fig. 3b), which evidently established that H₂ gas formed in the reaction of 1 with OH⁻. In this regard, we have proposed that in the first step of this reaction, the nucleophilic addition of OH⁻ to {Co-NO}⁸ generates a transient N-bound [Co-(NOOH)]⁺ intermediate that is generated by an internal electron transfer to Co^III (Scheme 2, reaction (I)). By following the mechanism proposed in the case of Co^III-H,^30a−c O₂,¹⁵ and H₂O₂(ref. 26b) formation, we have proposed the sequences of the NOM reaction of 1, which leads to the generation of Co^II-nitrito and H₂ (Scheme 2, reaction (I)–(III) and Scheme 3). In the second step, O–H bond homolytic cleavage generates a Co^III-H transient species + NO₂⁻via a β-hydrogen elimination reaction of the [Co-(NOOH)]⁺ intermediate.³² The Co^III-H intermediate may undergo the following reactions to generate H₂ gas and Co^II-nitrito either (a) by the natural decomposition of the Co^III-H transient species to generate H₂,^30a,c,e−g or (b) by the H-atom abstraction from another [Co-(NOOH)]⁺ intermediate (Scheme 3). Also, to validate our assumption that the reaction goes through a plausible N-bound [Co-(NOOH)]⁺ intermediate followed by its transformation to the Co^III-H species (vide supra), we have performed the reaction of 1 with NaOH/NaOD (in 1 : 1 ratio). In this reaction, we have observed the formation of a mixture of H₂, D₂, and HD gases, which indicates clearly that the reaction goes through the formation of Co^III-H and Co^III-D transient species via the aforementioned mechanism (Fig. 3c). This is the only example where tracking of the H atoms has confirmed the H₂ generation from an N-bound NOO–H moiety as proposed for H₂ formation from Co^III-H.³⁰Open in a separate windowFig. 3Mass spectra of formation of (a) H₂ in the reaction of 1 (5.0 mM) with NaOH (5.0 mM), (b) D₂ in the reaction of 1 (5.0 mM) with NaOD (5.0 mM), (c) D₂, HD, and H₂ in the reaction of 1 (5.0 mM) with NaOD/NaOH (1 : 1), and (d) H₂ in the reaction of 1 (5.0 mM) with NaOH in the presence of 2,4 DTBP (50 mM).Open in a separate windowScheme 3NOM reaction of complex 1 in the presence of OH⁻, showing the different steps of the reaction.While, we do not have direct spectral evidence to support the formation of the transient N-bound [Co-(NOOH)]⁺ intermediate and its decomposition to the Co^III-H transient species via β-hydrogen transfer from the NOOH moiety to the cobalt center, support for its formation comes from our finding that the reactive hydrogen species can be trapped by using 2,4-di-tert-butyl-phenol (2,4-DTBP).³⁴ In this reaction, we observed the formation of 2,4-DTBP-dimer (2,4-DTBP-D, ∼67%) as a single product (ESI, ES, and Fig. S7^†). This result can readily be explained by the H-atom abstraction reaction of 2,4-DTBP either by [Co-(NOOH)]⁺ or Co^III-H, hence generating a phenoxyl-radical and 3 with H₂ (Fig. 3d and Scheme 2, reaction (a)). Also, we have detected H₂ gas formation in this reaction (ESI,^† ES, and Fig. 3d). In the next step, two phenoxyl radicals dimerized to give 2,4-DTBP-dimer (Scheme 2c, reaction (II)). Thus, the observation of 2,4-DTBP-dimer in good yield supports the proposed reaction mechanism (Scheme 2, reaction (a) and (b)). Further, the formation of 2,4 DTBP as a single product also rules out the formation of the hydroxyl radical as observed in the case of an O-bound nitrous acid intermediate.^26bFurthermore, we have explored the NOM reactivity of 1 with Na₂O/15-crown-5 (as the O²⁻ source) and observed the formation of the Co^II-nitrito complex (3) via a plausible Co^I-nitro (4) intermediate (Scheme 1, reaction (IIa); also see the ESI^† and ES); however, 1 was found to be inert towards H₂O (Scheme 1, reaction (III); also see the ESI, ES and Fig. S8^†). The product obtained in the reaction of 1 with O²⁻ was characterized by various spectroscopic measurements.^15,26b The UV-vis absorption band of 1 (λ_max = 370 nm) disappears upon the addition of 1 equiv. of Na₂O and a new band (λ_max = 535 nm) forms, which corresponds to 3 (ESI, Fig. S9^†). The FT-IR spectrum of the isolated product of the above reaction shows a characteristic peak for Co^II-bound nitrite at 1271 cm⁻¹, which shifts to 1245 cm⁻¹ when exchanged with ¹⁵N-labeled-NO (¹⁵N¹⁶O) (ESI, ES, and Fig. S10^†), clearly indicating the generation of nitrite from the NO ligand of complex 1.^26b The ESI-MS spectrum recorded for the isolated product (vide supra) shows a prominent ion peak at m/z 333.1, and its mass and isotope distribution pattern matches with [(12-TMC)Co^II(NO₂)]⁺ (calc. m/z 333.1) (ESI, Fig. S11^†). Also, we quantified the amount of 3 (85 ± 5%) by quantifying the amount of nitrite (85 ± 5%) using the Griess reagent test (ESI, ES, and Fig. S6^†).In summary, we have demonstrated the reaction of Co^III-nitrosyl, [(12-TMC)Co^III(NO⁻)]²⁺/{CoNO}⁸ (1), with mono-oxygen reactive species (O²⁻, OH⁻ and H₂O) (Scheme 1). For the first time, we have established the clear formation of a Co^II-nitrito complex, [(12TMC)Co^II(NO₂⁻)]⁺ (3), and H₂ in the reaction of 1 with one equivalent of OH⁻via a transient N-bound [Co-(NOOH)]⁺ (2) intermediate. This [Co-(NOOH)]⁺ intermediate undergoes the O–H bond homolytic cleavage and generates a Co^III-H transient species with NO₂⁻, via a β-hydrogen elimination reaction of the [Co-(NOOH)]⁺ intermediate, which upon decomposition produces H₂ gas. This is in contrast to our previous report, where acid-induced nitrite reduction of 3 generated 1 and H₂O₂via an O-bound Co^II-ONOH intermediate.^26b Complex 1 was found to be inert towards H₂O; however, we have observed the formation of 3 when reacted with O²⁻. It is important to note that H₂ formation involves a distinctive pathway of O–H bond homolytic cleavage in the [Co-(NOOH)]⁺ intermediate, followed by the generation of the proposed Co^III-H transient species (Co^II + 1/2H₂)³⁰ prior to H₂ evolution as described in Co^I chemistry with H⁺ in many different ligand frameworks.³¹ The present study is the first-ever report where the base induced NOM reaction of Co^III-nitrosyl (1) leads to Co^II-nitrito (3) with H₂ evolution via an N-bound [Co-(NOOH)]⁺ intermediate, in contrast to the chemistry of O-bound Co^II-ONOH^26b, hence adding an entirely new mechanistic insight of base induced H₂ gas evolution and an additional pathway for NOM reactions.     

Complexes of Bifunctional DO3A-N-(α-amino)propinate Ligands with Mg(II), Ca(II), Cu(II), Zn(II), and Lanthanide(III) Ions: Thermodynamic Stability,Formation and Dissociation Kinetics,and Solution Dynamic NMR Studies

The thermodynamic, kinetic, and structural properties of Ln³⁺ complexes with the bifunctional DO3A-ACE⁴⁻ ligand and its amide derivative DO3A-BACE⁴⁻ (modelling the case where DO3A-ACE⁴⁻ ligand binds to vector molecules) have been studied in order to confirm the usefulness of the corresponding Gd³⁺ complexes as relaxation labels of targeted MRI contrast agents. The stability constants of the Mg²⁺ and Ca²⁺ complexes of DO3A-ACE⁴⁻ and DO3A-BACE⁴⁻ complexes are lower than for DOTA⁴⁻ and DO3A³⁻, while the Zn²⁺ and Cu²⁺ complexes have similar and higher stability than for DOTA⁴⁻ and DO3A³⁻ complexes. The stability constants of the Ln(DO3A-BACE)⁻ complexes increase from Ce³⁺ to Gd³⁺ but remain practically constant for the late Ln³⁺ ions (represented by Yb³⁺). The stability constants of the Ln(DO3A-ACE)⁴⁻ and Ln(DO3A-BACE)⁴⁻ complexes are several orders of magnitude lower than those of the corresponding DOTA⁴⁻ and DO3A³⁻ complexes. The formation rate of Eu(DO3A-ACE)⁻ is one order of magnitude slower than for Eu(DOTA)⁻, due to the presence of the protonated amine group, which destabilizes the protonated intermediate complex. This protonated group causes the Ln(DO3A-ACE)⁻ complexes to dissociate several orders of magnitude faster than Ln(DOTA)⁻ and its absence in the Ln(DO3A-BACE)⁻ complexes results in inertness similar to Ln(DOTA)⁻ (as judged by the rate constants of acid assisted dissociation). The ¹H NMR spectra of the diamagnetic Y(DO3A-ACE)⁻ and Y(DO3A-BACE)⁻ reflect the slow dynamics at low temperatures of the intramolecular isomerization process between the SA pair of enantiomers, R-Λ(λλλλ) and S-Δ(δδδδ). The conformation of the C_α-substituted pendant arm is different in the two complexes, where the bulky substituent is further away from the macrocyclic ring in Y(DO3A-BACE)⁻ than the amino group in Y(DO3A-ACE)⁻ to minimize steric hindrance. The temperature dependence of the spectra reflects slower ring motions than pendant arms rearrangements in both complexes. Although losing some thermodynamic stability relative to Gd(DOTA)⁻, Gd(DO3A-BACE)⁻ is still quite inert, indicating the usefulness of the bifunctional DO3A-ACE⁴⁻ in the design of GBCAs and Ln³⁺-based tags for protein structural NMR analysis.     

Capture and displacement-based release of the bicarbonate anion by calix[4]pyrroles with small rigid straps

Two-phenoxy walled calix[4]pyrroles 1 and 2 strapped with small rigid linkers containing pyridine and benzene, respectively, have been synthesized. ¹H NMR spectroscopic analyses carried out in CDCl₃ revealed that both of receptors 1 and 2 recognize only F⁻ and HCO₃⁻ among various test anions with high preference for HCO₃⁻ (as the tetraethylammonium, TEA⁺ salt) relative to F⁻ (as the TBA⁺ salt). The bound HCO₃⁻ anion was completely released out of the receptors upon the addition of F⁻ (as the tetrabutylammonium, TBA⁺ salt) as a result of significantly enhanced affinities and selectivities of the receptors for F⁻ once converted to the TEAHCO₃ complexes. Consequently, relatively stable TEAF complexes of receptors 1 and 2 were formed via anion metathesis occurring within the receptor cavities. By contrast, the direct addition of TEAF to receptors 1 and 2 produces different complexation products initially, although eventually the same TEAF complexes are produced as via sequential TEAHCO₃ and TBAF addition. These findings are rationalized in terms of the formation of different ion pair complexes involving interactions both inside and outside of the core receptor framework.

The inherent selectivity of anion receptors can be reversed by ion pairing occurring both inside and outside of the receptor cavity.     

Syntheses and Characterization of Novel Perovskite-Type LaScO3-Based Lithium Ionic Conductors

Perovskite-type lithium ionic conductors were explored in the (Li_xLa_1−x/3)ScO₃ system following their syntheses via a high-pressure solid-state reaction. Phase identification indicated that a solid solution with a perovskite-type structure was formed in the range 0 ≤ x < 0.6. When x = 0.45, (Li_0.45La_0.85)ScO₃ exhibited the highest ionic conductivity and a low activation energy. Increasing the loading of lithium as an ionic diffusion carrier expanded the unit cell volume and contributed to the higher ionic conductivity and lower activation energy. Cations with higher oxidation numbers were introduced into the A/B sites to improve the ionic conductivity. Ce⁴⁺ and Zr⁴⁺ or Nb⁵⁺ dopants partially substituted the A-site (La/Li) and B-site Sc, respectively. Although B-site doping produced a lower ionic conductivity, A-site Ce⁴⁺ doping improved the conductive properties. A perovskite-type single phase was obtained for (Li_0.45La_0.78Ce_0.05)ScO₃ upon Ce⁴⁺ doping, providing a higher ionic conductivity than (Li_0.45La_0.85)ScO₃. Compositional analysis and crystal-structure refinement of (Li_0.45La_0.85)ScO₃ and (Li_0.45La_0.78Ce_0.05)ScO₃ revealed increased lithium contents and expansion of the unit cell upon Ce⁴⁺ co-doping. The highest ionic conductivity of 1.1 × 10⁻³ S cm⁻¹ at 623 K was confirmed for (Li_0.4Ce_0.15La_0.67)ScO₃, which is more than one order of magnitude higher than that of the (Li_xLa_1−x/3)ScO₃ system.     

Observations of tetrel bonding between sp3-carbon and THF

We report the direct observation of tetrel bonding interactions between sp³-carbons of the supramolecular synthon 3,3-dimethyl-tetracyanocyclopropane (1) and tetrahydrofuran in the gas and crystalline phase. The intermolecular contact is established via σ-holes and is driven mainly by electrostatic forces. The complex manifests distinct binding geometries when captured in the crystalline phase and in the gas phase. We elucidate these binding trends using complementary gas phase quantum chemical calculations and find a total binding energy of −11.2 kcal mol⁻¹ for the adduct. Our observations pave the way for novel strategies to engineer sp³-C centred non-covalent bonding schemes for supramolecular chemistry.

sp³-C⋯THF tetrel bonding was observed in the crystalline state and in the gas phase. Density functional calculations revealed interaction energies up to −11.2 kcal mol⁻¹ and showed that these adducts are held together mainly by electrostatics.     

Delocalization tunable by ligand substitution in [L2Al]n− complexes highlights a mechanism for strong electronic coupling

Ligand-based mixed valent (MV) complexes of Al(iii) incorporating electron donating (ED) and electron withdrawing (EW) substituents on bis(imino)pyridine ligands (I₂P) have been prepared. The MV states containing EW groups are both assigned as Class II/III, and those with ED functional groups are Class III and Class II/III in the (I₂P⁻)(I₂P²⁻)Al and [(I₂P²⁻)(I₂P³⁻)Al]²⁻ charge states, respectively. No abrupt changes in delocalization are observed with ED and EW groups and from this we infer that ligand and metal valence p-orbitals are well-matched in energy and the absence of LMCT and MLCT bands supports the delocalized electronic structures. The MV ligand charge states (I₂P⁻)(I₂P²⁻)Al and [(I₂P²⁻)(I₂P³⁻)Al]²⁻ show intervalence charge transfer (IVCT) transitions in the regions 6850–7740 and 7410–9780 cm⁻¹, respectively. Alkali metal cations in solution had no effect on the IVCT bands of [(I₂P²⁻)(I₂P³⁻)Al]²⁻ complexes containing –PhNMe₂ or –PhF₅ substituents. Minor localization of charge in [(I₂P²⁻)(I₂P³⁻)Al]²⁻ was observed when –PhOMe substituents are included.

Organo-aluminum mixed-valent complexes combine properties of both organic and transition element mixed-valent compounds. This supports delocalized electronic structures that are structurally and electronically tunable.     

Modulating the ground state,stability and charge transport in OFETs of biradicaloid hexahydro-diindenopyrene derivatives and a proposed method to estimate the biradical character

Biradicaloid compounds with an open-shell ground state have been the subject of intense research in the past decade. Although diindenoacenes are one of the most developed families, only a few examples have been reported as active layers in organic field-effect transistors (OFETs) with a charge mobility of around 10⁻³ cm² V⁻¹ s⁻¹ due to a steric disadvantage of the mesityl group to kinetically stabilize compounds. Herein, we disclose our efforts to improve the charge transport of the diindenoacene family based on hexahydro-diindenopyrene (HDIP) derivatives with different annelation modes for which the most reactive position has been functionalized with (triisopropylsilyl)ethynyl (TIPS) groups. All the HDIP derivatives show remarkably higher stability than that of TIPS-pentacene, enduring for 2 days to more than 30 days, which depends on the oxidation potential, the contribution of the singlet biradical form in the ground state and the annelation mode. The annelation mode affects not only the band gap and the biradical character (y₀) but also the value of the singlet–triplet energy gap (ΔE_S–T) that does not follow the reverse trend of y₀. A method based on comparison between experimental and theoretical bond lengths has been disclosed to estimate y₀ and shows that y₀ computed at the projected unrestricted Hartree–Fock (PUHF) level is the most relevant among those reported by all other methods. Thanks to their high stability, thin-film OFETs were successfully fabricated. Well balanced ambipolar transport was obtained in the order of 10⁻³ cm² V⁻¹ s⁻¹ in the bottom-gate/top-contact configuration, and unipolar transport in the top-gate/bottom-contact configuration was obtained in the order of 10⁻¹ cm² V⁻¹ s⁻¹ which is the highest value obtained for biradical compounds with a diindenoacene skeleton.

Biradicaloid HDIP derivatives show that the ΔE_S–T gap does not follow the reverse trend of the biradical character but depends more on the delocalization of the radical centres at the outer rings.     

Reaktionen von LiNPPh3 mit den Cyclooctatetraenid-Komplexen [Ln(C8H8)Cl(THF)2]2 von Cer und Samarium. Die Kristallstrukturen von [LiNPPh3]6, [Ln(C8H8)Li3Cl2(NPPh3)2(THF)3] (Ln = Ce,Sm) und [Li(THF)4][Sm(C8H8)2]

Reactions of LiNPPh₃ with the Cyclooctatetraenide Complexes [Ln(C₈H₈)Cl(THF)₂]₂ of Cerium and Samarium. Crystal Structures of [LiNPPh₃]₆, [Ln(C₈H₈)Li₃Cl₂(NPPh₃)₂(THF)₃] (Ln = Ce, Sm) and [Li(THF)₄][Sm(C₈H₈)₂] LiNPPh₃ reacts with the cyclooctatetraenide complexes [Ln(C₈H₈)Cl(THF)₂]₂ of cerium and samarium in tetrahydrofuran solution forming the phosphorane iminato complexes [Ln(C₈H₈)Li₃Cl₂(NPPh₃)₂(THF)₃]. According to crystal structure analyses these complexes show heterocubane structures under participation of the lanthanoid metal atom, of the three Li atoms as well as of the two Cl und the two N atoms of the NPPh₃^– groups. The crystal structure of LiNPPh₃ shows hexameric molecules with a Li₆N₆ polyhedron which is peripherally shielded by the phenyl groups. The structure of [Li(THF)₄][Sm(C₈H₈)₂], which has been isolated as a by-product, contains the samarium atom in a sandwichlike coordination by the two η⁸-C₈H₈^2– rings as it is also known from the corresponding anions with cerium and neodymium.     

Crystallographic characterization of the metal–organic framework Fe2(bdp)3 upon reductive cation insertion

Precisely locating extra-framework cations in anionic metal–organic framework compounds remains a long-standing, yet crucial, challenge for elucidating structure–performance relationships in functional materials. Single-crystal X-ray diffraction is one of the most powerful approaches for this task, but single crystals of frameworks often degrade when subjected to post-synthetic metalation or reduction. Here, we demonstrate the growth of sizable single crystals of the robust metal–organic framework Fe₂(bdp)₃ (bdp²⁻ = benzene-1,4-dipyrazolate) and employ single-crystal-to-single-crystal chemical reductions to access the solvated framework materials A₂Fe₂(bdp)₃·yTHF (A = Li⁺, Na⁺, K⁺). X-ray diffraction analysis of the sodium and potassium congeners reveals that the cations are located near the center of the triangular framework channels and are stabilized by weak cation–π interactions with the framework ligands. Freeze-drying with benzene enables isolation of activated single crystals of Na_0.5Fe₂(bdp)₃ and Li₂Fe₂(bdp)₃ and the first structural characterization of activated metal–organic frameworks wherein extra-framework alkali metal cations are also structurally located. Comparison of the solvated and activated sodium-containing structures reveals that the cation positions differ in the two materials, likely due to cation migration that occurs upon solvent removal to maximize stabilizing cation–π interactions. Hydrogen adsorption data indicate that these cation–framework interactions are sufficient to diminish the effective cationic charge, leading to little or no enhancement in gas uptake relative to Fe₂(bdp)₃. In contrast, Mg_0.85Fe₂(bdp)₃ exhibits enhanced H₂ affinity and capacity over the non-reduced parent material. This observation shows that increasing the charge density of the pore-residing cation serves to compensate for charge dampening effects resulting from cation–framework interactions and thereby promotes stronger cation–H₂ interactions.

Single-crystal X-ray diffraction reveals structural influences on gas adsorption properties in anionic metal–organic frameworks.     

Fluorescent probe for the imaging of superoxide and peroxynitrite during drug-induced liver injury

Drug-induced liver injury (DILI) is an important cause of potentially fatal liver disease. Herein, we report the development of a molecular probe (LW-OTf) for the detection and imaging of two biomarkers involved in DILI. Initially, primary reactive oxygen species (ROS) superoxide (O₂˙⁻) selectively activates a near-infrared fluorescence (NIRF) output by generating fluorophore LW-OH. The C C linker of this hemicyanine fluorophore is subsequently oxidized by reactive nitrogen species (RNS) peroxynitrite (ONOO⁻), resulting in cleavage to release xanthene derivative LW-XTD, detected using two-photon excitation fluorescence (TPEF). An alternative fluorescence pathway can occur through cleavage of LW-OTf by ONOO⁻ to non-fluorescent LW-XTD-OTf, which can react further with the second analyte O₂˙⁻ to produce the same LW-XTD fluorescent species. By combining NIRF and TPEF, LW-OTf is capable of differential and simultaneous detection of ROS and RNS in DILI using two optically orthogonal channels. Probe LW-OTf could be used to detect O₂˙⁻ or O₂˙⁻ and ONOO⁻ in lysosomes stimulated by 2-methoxyestradiol (2-ME) or 2-ME and SIN-1 respectively. In addition, we were able to monitor the chemoprotective effects of tert-butylhydroxyanisole (BHA) against acetaminophen (APAP) toxicity in living HL-7702 cells. More importantly, TPEF and NIRF imaging confirmed an increase in levels of both O₂˙⁻ and ONOO⁻ in mouse livers during APAP-induced DILI (confirmed by hematoxylin and eosin (H&E) staining).

Drug-induced liver injury (DILI) is an important cause of potentially fatal liver disease.     

Facilitated inversion complicates the stereodynamics of an SN2 reaction at nitrogen center

Bimolecular nucleophilic substitution (S_N2) reactions at carbon center are well known to proceed with the stereospecific Walden-inversion mechanism. Reaction dynamics simulations on a newly developed high-level ab initio analytical potential energy surface for the F⁻ + NH₂Cl nitrogen-centered S_N2 and proton-transfer reactions reveal a hydrogen-bond-formation-induced multiple-inversion mechanism undermining the stereospecificity of the N-centered S_N2 channel. Unlike the analogous F⁻ + CH₃Cl S_N2 reaction, F⁻ + NH₂Cl → Cl⁻ + NH₂F is indirect, producing a significant amount of NH₂F with retention, as well as inverted NH₂Cl during the timescale within the unperturbed NH₂Cl molecule gets inverted with only low probability, showing the important role of facilitated inversions via an FH…NHCl⁻-like transition state. Proton transfer leading to HF + NHCl⁻ is more direct and becomes the dominant product channel at higher collision energies.

Multiple-inversion, the analogue of the double-inversion pathway recently revealed for S_N2@C, is the key mechanism in S_N2 at N center undermining stereospecificity.     

Using internal electrostatic fields to manipulate the valence manifolds of copper complexes

A series of tetradentate tris(phosphinimine) ligands (^R3P₃tren) was developed and bound to Cu^I to form the trigonal pyramidal, C_3v-symmetric cuprous complexes [^R3P₃tren-Cu][BAr^F₄] (1PR3) (PR₃ = PMe₃, PMe₂Ph, PMePh₂, PPh₃, PMe₂(NEt₂), BAr^F₄ = B(C₆F₅)₄). Electrochemical studies on the Cu^I complexes were undertaken, and the permethylated analog, 1PMe3, was found to display an unprecedentedly cathodic Cu^I/Cu^II redox potential (−780 mV vs. Fc/Fc⁺ in isobutyronitrile). Elucidation of the electronic structures of 1PR3via density functional theory (DFT) studies revealed atypical valence manifold configurations, resulting from strongly σ-donating phosphinimine moieties in the xy-plane that destabilize 2e (d_xy/d_x²−y²) orbital sets and uniquely stabilized a₁ (d_z²) orbitals. Support is provided that the a₁ stabilizations result from intramolecular electrostatic fields (ESFs) generated from cationic character on the phosphinimine moieties in ^R3P₃tren. This view is corroborated via 1-dimensional electrostatic potential maps along the z-axes of 1PR3 and their isostructural analogues. Experimental validation of this computational model is provided upon oxidation of 1PMe3 to the cupric complex [^Me3P₃tren-Cu][OTf]₂ (2PMe3), which displays a characteristic Jahn–Teller distortion in the form of a see-saw, pseudo-C_s-symmetric geometry. A systematic anodic shift in the potential of the Cu^I/Cu^II redox couple as the steric bulk in the secondary coordination sphere increases is explained through the complexes'' diminishing ability to access the ideal C_s-symmetric geometry upon oxidation. The observations and calculations discussed in this work support the presence of internal electrostatic fields within the copper complexes, which subsequently influence the complexes'' properties via a method orthogonal to classic ligand field tuning.

Secondary coordination sphere electrostatic effects tune the valence manifolds of copper centers, impacting molecular geometries, photophysical properties, and redox potentials.     

Twist and sliding dynamics between interpenetrated frames in Ti-MOF revealing high proton conductivity

We report the design and synthesis of a titanium catecholate framework, MOF-217, comprised of 2,4,6-tri(3,4-dihydroxyphenyl)-1,3,5-triazine (TDHT) and isolated TiO₆ clusters, with 2-fold interpenetrated srs topology. The dynamics of the organic linker, breaking the C_3h symmetry, allowed for reversible twist and sliding between interpenetrated frames upon temperature change and the inclusion of small molecules. Introduction of 28 wt% imidazole into the pores of MOF-217, 28% Im-in-MOF-217, resulted in four orders of magnitude increase in proton conductivity, due to the appropriate accommodation of imidazole molecules and their proton transfer facilitated by the H-bond to the MOF structure across the pores. This MOF-based proton conductor can be operated at 100 °C with a proton conductivity of 1.1 × 10⁻³ S cm⁻¹, standing among the best performing anhydrous MOF proton conductors at elevated temperature. The interframe dynamics represents a unique feature of MOFs that can be accessed in the future design of proton conductors.

Twist and sliding dynamics observed in a titanium catecholate MOF induced by imidazole for efficient proton conduction.     

FLP-type nitrile activation and cyclic ether ring-opening by halo-borane nonagermanide-cluster Lewis acid–base pairs

Even though homoatomic nine-atom germanium clusters are known for two decades, their chemical properties are still rarely investigated. We now discovered that Zintl ion main group-element clusters possess a reactive lone pair of electrons, and we show a new pathway to bind ligands with functional groups to the [Ge₉] cluster core through Ge–C bond formation. We report on the reactivity of [Ge₉{Si(TMS)₃}₂]²⁻ (TMS = trimethylsilyl) towards a series of Lewis acidic bromo-boranes. The reaction of [Ge₉{Si(TMS)₃}₂]²⁻ and DAB^o-tol–Br (DAB = 1,3,2-diazaborolidine; o-tol = 2-methylphenyl) resulted, depending on the reaction protocol, either in the formation of [Ge₉{Si(TMS)₃}₂DAB^o-tol]⁻ (1a) with direct Ge–B interactions, or in [Ge₉{Si(TMS)₃}₂(CH₂)₄O–DAB^o-tol]⁻ (2a) featuring a ring-opened thf moiety. Ring opening reactions occur for all bulkier DAB^R–Br [R: o-xyl (2,6-dimethylphenyl), Mes (2,4,6-trimethylphenyl), Dipp (2,6-diisopropylphenyl)], DAB(ii)^Dipp–Br and acyclic (ⁱPr₂N)₂BBr without Ge–B bond formation as shown for the structural characterization of the ring-opened products of thf (3, 4) and trimethylene oxide (5). In contrast to thf, the activation of CH₃CN requires the simultaneous presence of Lewis-acid and Lewis-basic reactants allowing the formation of [Ge₉{Si(TMS)₃}₂CH₃C N–DAB^Mes]⁻ (6a). Within the presented compounds, 3 and 4 show an unusual substitution pattern of the three ligands at the [Ge₉] core in the solid state. The [Ge₉] cluster/borane systems correspond to intermolecular frustrated Lewis pairs (FLPs), in which the [Ge₉] cluster with several lone pairs represents the Lewis base, and the borane is the Lewis acid.

The reactivity of the lone pairs in polyhedral Zintl anions is shown by the reaction of the bis-silylated cluster [Ge₉{Si(TMS)₃}₂]²⁻ accomplishing cyclic-ether ring-opening or nitrile activation according to a FLP-like mechanism with bromo-boranes.     

“Anti-electrostatic” halogen bonding in solution

Halogen-bonded (XB) complexes between halide anions and a cyclopropenylium-based anionic XB donor were characterized in solution for the first time. Spontaneous formation of such complexes confirms that halogen bonding is sufficiently strong to overcome electrostatic repulsion between two anions. The formation constants of such “anti-electrostatic” associations are comparable to those formed by halides with neutral halogenated electrophiles. However, while the latter usually show charge-transfer absorption bands, the UV-Vis spectra of the anion–anion complexes examined herein are determined by the electronic excitations within the XB donor. The identification of XB anion–anion complexes substantially extends the range of the feasible XB systems, and it provides vital information for the discussion of the nature of this interaction.

Spontaneous formation of “anti-electrostatic” complexes in solution demonstrates that halogen bonding can be sufficiently strong to overcome anion–anion repulsion when the latter is attenuated by the polar medium.

Halogen bonding (XB) is an attractive interaction between a Lewis base (LB) and a halogenated compound, exhibiting an electrophilic region on the halogen atom.¹ It is most commonly related to electrostatic interaction between an electron-rich species (XB acceptor) and an area of positive electrostatic potential (σ-holes) on the surface of the halogen substituent in the electrophilic molecule (XB donor).² Provided that mutual polarization of the interacting species is taken into account, the σ-hole model explains geometric features and the variation of stabilities of XB associations, especially in the series of relatively weak complexes.³ Based on the definition of halogen bonding and its electrostatic interpretation, this interaction is expected to involve either cationic or neutral XB donors. Electrostatic interaction of anionic halogenated species with electron-rich XB acceptors, however, seems to be repulsive, especially if the latter are also anionic. Yet, computational analyses predicted that halogen bonding between ions of like charges, called “anti-electrostatic” halogen bonding (AEXB),⁴ can possibly be formed^5–12 and the first examples of AEXB complexes formed by different anions, i.e. halide anions and the anionic iodinated bis(dicyanomethylene)cyclopropanide derivatives 1 (see Scheme 1) or the anionic tetraiodo-p-benzoquinone radical, were characterized recently in the solid state.^13,14 The identification of such complexes substantially extends the range of feasible XB systems, and it provides vital information for the discussion of the nature of this interaction. Computational results, however, significantly depend on the used methods and applied media (gas phase vs. polar environment and solvation models) and the solid state arrangements of the XB species might be affected by crystal forces and/or counterions. Unambiguous confirmation of the stability of the halogen-bonded anion–anion complexes and verification of their thermodynamic characteristics thus requires experimental characterization of the spontaneous formation of such associations in solution. Still, while the solution-phase complexes formed by hydrogen bonding between two anionic species were reported previously,^15–17 there is currently no example of “anti-electrostatic” XB in solution.Open in a separate windowScheme 1Structures of the XB donor 1 and its hydrogen-substituted analogue 2.To examine halogen bonding between two anions in solution, we turn to the interaction between halides and 1,2-bis(dicyanomethylene)-3-iodo-cyclopropanide 1 (Scheme 1).^‡ Even though this compound features a cationic cyclopropenylium core, it is overall anionic, and calculations have demonstrated that its electrostatic potential is universally negative across its entire surface.¹³ The solution of 1 (with tris(dimethylamino)cyclopropenium (TDA) as counterion) in acetonitrile is characterized by an absorption band at 288 nm with ε = 2.3 × 10⁴ M⁻¹ cm⁻¹ (Fig. 1). As LB, we first applied iodide anions taken as a salt with n-tetrabutylammonium counter-ion, Bu₄NI. This salt does not show absorption bands above 290 nm, but its addition to a solution of 1 led to a rise of absorption in the 290–350 nm range (Fig. 1). Subtraction of the absorption of the individual components from that of their mixture produced a differential spectrum which shows a maximum at about 301 nm (insert in Fig. 1). At constant concentration of the XB donor (1) and constant ionic strength, the intensity of the absorption in the range of 280–300 nm (and hence differential absorbance, ΔAbs) rises with increasing iodide concentration (Fig. S1 in the ESI^†). This suggests that the interaction of iodide with 1 results in the formation of the [1, I⁻]-complex which shows a higher absorptivity in this spectral range (eqn (1)):1 + X⁻ ⇌ [1, X⁻]1Open in a separate windowFig. 1Spectra of acetonitrile solutions with constant concentration of 1 (0.60 mM) and various concentrations of Bu₄NI (6.0, 13, 32, 49, 75, 115 and 250 mM, solid lines from the bottom to the top). The dashed lines show spectra of the individual solutions 1 (c = 0.60 mM, red line) and Bu₄NI (c = 250 mM, blue line). The ionic strength was maintained using Bu₄NPF₆. Insert: Differential spectra of the solutions obtained by subtraction of the absorption of the individual components from the spectra of their corresponding mixtures.To clarify the mode of interaction between 1 and iodide in the complex, we also performed analogous measurements with the hydrogen-substituted compound 2 (see Scheme 1). The addition of iodide to a solution of 2 in acetonitrile did not increase the absorption in the 280–300 nm spectral range. Instead, some decrease of the absorption band intensity of 2 with the increase of concentration of I⁻ anions was observed (Fig. S2 in the ESI^†). Such changes are related to a blue shift of this band resulting from the hydrogen bonding between 2 and iodide (formation of hydrogen-bonded [2, I⁻] complex is corroborated by the observation of the small shift of the NMR signal of the proton of 2 to the higher ppm values in the presence of I⁻ anions, see Fig. S3 in the ESI^†).^§ Furthermore, since H-compound 2 should be at least as suitable as XB donor 1 to form anion–π complexes with the halide, this finding (as well as solid-state and computational data^¶) rules out that any increase in absorption in this region observed with the I-compound 1 may be due to this alternative interaction.Likewise, the addition of NBu₄I to a solution of TDA cations taken as a salt with Cl⁻ anions did not result in an increase in the relevant region. Hence, we could also rule out anion–π interactions with the TDA counter-ions as source of the observed changes, which is in line with previous reports on the electron-rich nature of TDA.¹⁸All these observations (supported by the computational analysis, vide infra) indicate that the [1, I⁻] complex (eqn (1)) is formed via halogen bonding of I⁻ with iodine substituents in 1. The changes in the intensities of the differential absorption ΔAbs as a function of the iodide concentration (with constant concentration of XB donor (1) as well as constant ionic strength) are well-modelled by the 1 : 1 binding isotherm (Fig. S1 in the ESI^†). The fit of the absorption data produced a formation constant of K = 15 M⁻¹ for the [1, I⁻] complex (Table 1).^|| The overlap with the absorption of the individual XB donor hindered the accurate evaluation of the position and intensity of the absorption band of the corresponding complex which is formed upon LB-addition to 1. As such, the values of Δλ_max shown in Table 1 represent a wavelength of the largest difference in the absorptivity of the [1, I⁻] complex and individual anion 1, and Δε reflects the difference of their absorptivity at this point (see the ESI^† for the details of calculations).Equilibrium constants and spectral characteristics of the complexes of 1 with halide anions X⁻