Non-invasive identification of chemical compounds by energy dispersive X-ray fluorescence spectrometry, combined with chemometric methods of data evaluation

Chemicals from customers' returns have to be analyzed before they can be reused as raw materials in production. A procedure for non-invasive qualitative analysis of compounds in a closed container based on energy dispersive X-ray fluorescence (EDXRF) spectrometry is described. EDXRF was chosen as method for noninvasive analysis of chemicals through PE bottle walls without opening the bottle. This analysis aims for a quick proof of correspondence between the declaration of a reagent on the label of the bottle and its content. This analytical result cannot be achieved by a mere evaluation of characteristic element lines in EDXRF-spectra in combination with the method of matrix correction or the method of mean atomic number. These methods take into account only a small part of the total information available in an X-ray spectrum. It is shown here that valuable additional information is extractable from the spectral ranges of the Compton-scattering and Rayleigh-scattering areas by the use of methods of multivariate data analysis, especially by principle component analysis (PCA). Regularized discriminant analysis (RDA) was employed to establish a classification scheme for unknown samples.     

EDXRF as an analytical tool in art: Case studies from pigment identification and treatment assessment

Energy dispersive X-ray fluorescence (EDXRF) was employed for the identification of pigments decorating Hellenistic figurines, and the assessment of the efficiency of a treatment with barium hydroxide applied to stone. Elements present in the colored areas of the figurines, as well as the treated stone was identified by EDXRF. These data together with complementary information obtained by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction analysis (XRD) led to the identification of several precious pigments. As far as the treatment efficiency is concerned, EDXRF analysis revealed that barium is unevenly distributed on the treated surface and reaches a maximum depth of 2.5 mm.     

EDXRF as an analytical tool in art: Case studies from pigment identification and treatment assessment

Energy dispersive X-ray fluorescence (EDXRF) was employed for the identification of pigments decorating Hellenistic figurines, and the assessment of the efficiency of a treatment with barium hydroxide applied to stone. Elements present in the colored areas of the figurines, as well as the treated stone was identified by EDXRF. These data together with complementary information obtained by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction analysis (XRD) led to the identification of several precious pigments. As far as the treatment efficiency is concerned, EDXRF analysis revealed that barium is unevenly distributed on the treated surface and reaches a maximum depth of 2.5 mm.     

Elemental composition and microstructure analysis of a rabbit urolith

Following physical examination and radiography analysis, cystotomy was performed to remove a rabbit’s single bladder stone. This rabbit urolith was analyzed by X-ray fluorescence spectrometry (EDXRF) and scanning electron microscopy (SEM). The EDXRF technique was successful for the determination of major elements (Ca, Mg, P, K and S) and presented sufficient sensitivity to also trace elements (Sr, Fe, Cu, V, Cr, Mn, Zn and Pb) determination. The results showed significant quantitative and structural variations among the urolith regions. The EDXRF technique using the fundamental parameters method and SEM attend as complementary techniques that can be useful in the management of urinary stone analysis.     

Analytical determination of colouring elements and of their compounds in glass beads from graveyards of the Merowings time

428 Monochrome beads from mainly female graves excavated at Groß-Gerau, Pleidelsheim and Weingarten (Germany) were examined by non-destructive methods, i.e. energy-dispersive X-ray fluorescence analysis (EDXRF), wavelength-dispersive X-ray fluorescence analysis (WDXRF) with fundamental parameter evaluation, and X-ray diffraction analysis. The results obtained by EDXRF were compared with those for beads from Donaueschingen and Eichstetten, published in former papers. In most cases the results obtained by WDXRF show very high contents of the colouring compounds, corresponding to a low glass quality. The diffraction measurements show crystalline colouring compounds at the surface of the glass beads that can be characterized as Pb₂SnSbO_6.5 for the yellow beads and as Cu₂O for the ochre beads.     

Energy Dispersive X-Ray Fluorescence Analysis and X-Ray Microanalysis of Medieval Silver Coins

 Austrian medieval silver/copper coins were investigated at their surfaces by energy dispersive X-ray fluorescence analysis (EDXRF) and at the cross-sections by X-ray microanalysis in the scanning electron microscope (SEM/EDX) in order to estimate the error occurring when corroded objects of art and archaeology are analyzed on the surface by non-destructive methods. Additionally, Ag/Cu-standards were treated in diluted sulphuric acid and the depletion of copper on the surface was measured by EDXRF. By calculating the ratio of the Ag-K/Ag-L intensity the process of blanching could be studied.     

X-ray spectrometry using polycapillary X-ray optics and position sensitive detector

Polycapillary X-ray optics (capillary X-ray lens) are now popular in X-ray fluorescence (XRF) analysis. Such an X-ray lens can collect X-rays emitted from an X-ray source in a large solid angle and form a very intense X-ray microbeam which is very convenient for microbeam X-ray fluorescence (MXRF) analysis giving low minimum detection limits (MDLs) in energy dispersive X-ray fluorescence (EDXRF). A new method called position sensitive X-ray spectrometry (PSXS) which combines an X-ray lens used to form an intense XRF source and a position sensitive detector (PSD) used for wavelength dispersive spectrometry (WDS) measurement was developed recently in the X-ray Optics Laboratory of Institute of Low Energy Nuclear Physics (ILENP) at Beijing Normal University. Such a method can give high energy and spacial resolution and high detection efficiency simultaneously. A short view of development of both the EDXRF using a capillary X-ray lens and the new PSXS is given in this paper.     

Soil characterization by energy dispersive X-ray fluorescence: sampling strategy for in situ analysis.

This work describes a sampling strategy that will allow the use of portable EDXRF (energy dispersive X-ray fluorescence) instruments for "in situ" soil analysis. The methodology covers a general approach to planning field investigations for any type of environmental studies and it was applied for a soil characterization study in the zone of Campana, Argentina, by evaluating data coming from an EDXRF spectrometer with a radioisotope excitation source. Simulating non-treated sampled as "in situ" samples and a soil characterization for Campana area was intended. "In situ" EDXRF methodology is a powerful analytical modality with the advantage of providing data immediately, allowing a fast general screening of the soil composition.     

Characterization of an energy dispersive X-ray fluorescence imaging system based on a Micropattern Gaseous Detector

An energy dispersive X-ray fluorescence (EDXRF) imaging system based on a Micropattern Gas Detector has already shown good results for different applications. An X-ray tube, a pinhole camera and a Micro-Hole and Strip Plate (MHSP) based detector are the main components of the experimental system. The detector uses an MHSP in a Xe atmosphere at 1 bar, and acting as a photon counting device, i.e., it is capable to record each single event retaining the energy and the interaction position (2D-sensitive detector) information of the incident photon, demonstrating to be a promising device for EDXRF imaging applications. This work presents studies of energy resolution, energy linearity and spatial resolution/elemental mapping as a function of image magnification of the system.     

Zirconium and hafnium determination by energy dispersive X-ray fluorescence with solid phase preconcentration

Two preconcentration methods has been developed for simultaneous determination of zirconium and hafnium by energy dispersive X-ray fluorescence (EDXRF). The first method is a liquid-solid extraction procedure with the use of an anionic exchange resin modified with xylenol orange. The second is a precipitation procedure carried out in the presence of lanthanum. Both methods permit significant enhancement of sensitivity in comparison with direct measurement in the aqueous phase. The applicability of both procedures for the preconcentration of Zr and Hf prior to their determination by EDXRF was demonstrated by analyzing synthetic mixtures and a sample of zirconium ore. The results obtained with the use of the modified resin show relative standard deviation of about 4% and good agreement with those obtained by spectrographic analysis.     

能量色散X射线荧光光谱背景扣除方法的探讨

能量色散X射线荧光分析使得特征X射线的全能峰叠加在背景之上,针对能量色散X射线荧光谱线背景扣除算法的研究,简述了剥峰法和小波变换法扣除背景的原理,并将这两种方法用于对实际谱线的处理,取得了良好的效果.同时对两种方法的算法和处理效果进行了对比研究,表明剥峰法相对简单,而小波变换法需要考虑小波基和分解层次等的影响,但是对整个谱线的综合处理效果相对要好一些.     

Energy dispersive X-ray fluorescence analysis of chloride in reforming catalysts

A relatively less expensive Phillips PV 9500/SY 585 automatic energy dispersive X-ray fluorescence (EDXFR) spectrometer with rhodium target, was modified using a commercial kitchen aluminium wrapping foil filter, for the determination of chloride in bifunctional reforming catalysts. Quantitation of chloride was carried out by the Claisse-Quintin method with a catalyst sample of known chloride content as an external standard. The results of EDXRF chloride analysis of different catalyst samples, containing varying amounts of percent carbon and chloride, compared well (p>0.75) with those obtained by silver chloride precipitation method. The small values of percent relative standard deviations at 0.4 to 4.5% showed a good reproducibility of the method. With the total analysis time of a few minutes combined with no sample preparation, the present method seems to be superior as compared to presently employed methods of chloride analysis in reforming catalysts.     

EDXRF analysis of some samples of cigarette paper

The effects of tobacco on human health have been widely investigated and documented However, there are not too many specific reports on the potential risk associated to the presence of metals in the paper employed for cigarettes fabrication Even more, there is a lack of national and international norms in this respect. Otherwise, in the literature INAA appears as the unique method for wrapping paper analysis. Therefore, without a nuclear reactor available at the National University of Mexico (UNAM), EDXRF was selected with the aim to explore the possibility to apply this method, instead of INAA, to the analysis of wrapping paper assuming this task, at the beginning, as a supplement to a previous research which was recently presented (2005).¹ The analytical work was developed on the wrapping paper of eight of the most known marks of cigarettes in Mexico, in two non-destructive stages: a first survey, by the classical technique of energy dispersive X-ray fluorescence (EDXRF), used a 1 11 GB qradiation source of ²³⁸Pu and a SiLi detector. In the absence of standard reference materials for cigarette’s paper, the SRM-1832 and 1833 were required for calibration, a fiberglass air filter was used as a secondary standard. The second stage was performed in a spectrometer TX-2000, anode of Mo, quantification software EDXRF32 (fundamental parameters). This paper presents a comparison of the obtained values with those found in the literature. The results show that the EDXRF method, in the Mo tube version, has the adequate precision and detection limits for the analysis of wrapping paper.     

光谱技术在纺织品检测中的应用（一）--X荧光能谱仪在纺织品重金属检测中的应用

近年来,世界各国对纺织品中的有害物质含量的控制已越来越严格。本文对纺织品中重金属检测方法的现状进行了概括,进一步介绍了X荧光能谱法在纺织品重金属检测上的应用。采用X荧光能谱法检测布样中的重金属和采用电感耦合等离子体原子发射光谱法（ICP-AES）检测结果基本一致。结果表明：X荧光能谱法是一种有效的纺织品中重金属检测方法,也为纺织品中重金属的检测提供了一种快速、简便、无损的初筛方法。     

Determination of tungsten in ores by energy dispersive X-ray fluorescence analysis

The possible determination of tungsten in low grade ores from Northern India, Rajasthan State has been explored by energy dispersive X-ray fluorescence analysis /EDXRF/ technique using radioisotope based excitation of W L X-rays and high resolution Si/Li/ detector system. Finely powdered ore has been diluted with optimal quantity of cellulose and converted into pellets to make it suitable for X-ray analysis after homogenization. The experiments have shown the minimum detectable limit of 33 ppm in diluted matrix. The results are compared with the spectrophotometric stannous chloride-thiocyanate method. EDXRF appears to be encouraging for routine and precise analysis of tungsten in low grade ores.     

Determination of the alloying elements in ancient silver coins

Isotope excited energy dispersive X-ray fluorescence (EDXRF) was used for the determination of the major components, silver and copper, of ancient coins. A ring shaped ¹²⁵I source was used for excitation. Various methods were developed and compared for quantitative evaluation in order to eliminate matrix effects and the effects caused by the differences in geometry. The method proposed by the authors ensures determination with acceptable error using certified standard samples of alloys. The results of this method were compared with those of prompt gamma activation analysis (PGAA) and with data from contemporary written sources.     

Determination of Cr,Fe, Co,Ni, Cu,Zn, As and Pb in liquid chemical waste by energy dispersive X-ray fluorescence

A method for simultaneous determination of Cr, Fe, Co, Ni, Cu, Zn, As e Pb in liquid chemical waste using Energy Dispersive X-Ray Fluorescence (EDXRF) technique was evaluated. A small sample amount (200 μL) was dried on a 6.35 μm thickness Mylar film at 60 °C and the analyses were carried out using an EDXRF spectrometer operated with an X-ray Mo tube (Zr filter) at 30 kV/20 mA. The acquisition time was 300 s and the Ga element was utilized as internal standard at 25 mg/L for quantitative analysis. The method trueness was assessed by spiking and the detection limit for those elements ranged from 0.39 to 1.7 mg/L. This method is notable because it assists the choice of the more appropriated waste treatment procedure, in which inter elemental interference is a matter of importance. In addition, this inexpensive method allows a non-destructive determination of the elements from ₁₉K to ₉₂U simultaneously.     

Characterization of Japanese color sticks by energy dispersive X-ray fluorescence,X-ray diffraction and Fourier transform infrared analysis

This work comprises the use of energy dispersive X-ray fluorescence (EDXRF), X-ray diffraction (XRD) and Fourier transformed infrared (FTIR) techniques for the study of the composition of twentieth century traditional Japanese color sticks. By using the combination of analytical techniques it was possible to obtain information on inorganic and organic pigments, binders and fillers present in the sticks. The colorant materials identified in the sticks were zinc and titanium white, chrome yellow, yellow and red ochre, vermillion, alizarin, indigo, Prussian and synthetic ultramarine blue. The results also showed that calcite and barite were used as inorganic mineral fillers while Arabic gum was the medium used. EDXRF offered great potential for such investigations since it allowed the identification of the elements present in the sample preserving its integrity. However, this information alone was not enough to clearly identify some of the materials in study and therefore it was necessary to use XRD and FTIR techniques.     

Analysis of low levels of rare earths by radiochemical neutron activation analysis

A procedure for the radiochemical neutron-activation analysis for the rare earth elements (REE) involves the separation of the REE as a group by rapid ion-exchange methods and determination of yields by reactivation or by energy dispersive X-ray fluorescence (EDXRF) spectrometry. The U. S. Geological Survey (USGS) standard rocks, BCR-1 and AGV-1, were analyzed to determine the precision and accuracy of the method. We found that the precision was ±5–10% on the basis of replicate analysis and that, in general the accuracy was within ±5% of accepted values for most REE. Data for USGS standard rocks BIR-1 (Icelandic basalt) and DNC-1 (North Carolina diabase) are also presented.