Studies of the reactions of Br(2P3/2) and Br(2P1/2) with SiH4

Photobromination of SiH₄ under uv-irradiation at various wavelengths has been studied. Rate constants for the elementary reactions Br(²P_3/2)+SiH₄HBr+SiH₃ (k=3.2×10^–11 exp(–21.8±2.5)/RT, cm³/s) and Br^* (²P_1/2)+SiH₄HBr+SiH₃ (k^*=(3±1)×10^–13 cm³/s) have been determined in the temperature range from 300 to 415 K.

---

- . Br(²P_3/2)+SiH₄HBr+SiH₃, k=3,2×10^–11 exp (–21,8±2,5)/RT ³/ Br^*(²P_1/2)+SiH₄HBr+SiH₃, k^*=(3±1)×10^{–13 3}/ 300–415 K.

     

Semiquantitative estimation of the mycotoxins citrinin, Ochratoxin A, Aflatoxin M1 and penicillic acid on thin-layer chromatograms with a grey scale

Summary Spots of citrinin, ochratoxin A, aflatoxin M₁ and penicillic acid on thin-layer chromatograms can be semi-quantitatively estimated by using a grey scale, commonly used in photo laboratories. The detection limits are 0.01 g for citrinin, 0.006 g for ochratoxin A, 0.002 g for aflatoxin M₁ and 0.01 g for penicillic acid. Standard curves for these mycotoxins are given.

---

Halbquantitative Bestimmung der Mycotoxine Citrinin, Ochratoxin A, Aflatoxin M₁ und Penicillinsäure auf Dünnschicht-Chromatogrammen mit Hilfe eines Graukeils

Zusammenfassung Mit Hilfe eines in Photolabors gebräuchlichen Graukeils können dünnschicht-chromatographische Flecke der obengenannten Mycotoxine halbquantitativ bestimmt werden. Die Nachweisgrenzen betragen 0,01 g für Citrinin, 0,006 g für Ochratoxin A, 0,002 g für Aflatoxin M₁ und 0,01 g für Penicillinsäure. Eichkurven werden angegeben.

     

Simultaneous determination of copper,mercury and lead by first-order derivative spectrophotometry using dithizone as reagent

A first-order derivative spectrophotometric method has been developed for the simultaneous determination of copper, mercury and lead at g/L levels using dithizone as reagent. The procedure involves the simultaneous extraction of these elements by dithizone in chloroform from weakly alkaline solutions. Linear calibration curves were obtained in the ranges 0.5–10 (Cu), 1–10 (Hg) and 1–10 (Pb) g present in 40 ml of aqueous phase with detection limits of 5 g/L (Cu) and 20 g/L (Hg and Pb). The R.S.D.s for 100 g/L of copper, mercury and lead were 2.5, 2.6 and 3.1% respectively, for 5 determinations. The method is applicable for the determination of copper and lead in marine sediment samples with good precision and accuracy.     

Thorium in man and environment uptake and clearance

The intake and tissue distribution of thorium (^{2 3 2}Th) was studied in an urban (Bombay) population in India. From the analysis of 16 whole diet samples, the average daily intake through food was found to be 2 g (range 0.8–4.3 g·d^–1). The estimated intake through drinking water and inhalation comes out to be 0.03 and 0.02 g per day. From the analysis of human autopsy tissue samples it is observed that the concentration ranges in lungs and bone are 1.5–16 g/kg and 0.2–9.0 g/kg fresh weight respectively. The average urinary concentration is 12 ng/1 (range 7–22 ng/l for 10 samples). Among the different body tissues, pulmonary lymph nodes were found to contain the highest concentration (geometric mean 53.4 g/kg, range 31.4–85.5 g/kg for 6 samples). Analysis of the samples was done by the neutron activation technique. 311.8 keV gamma photons of^{2 3 3}Pa which is the activation product of^{2 3 2}Th, were counted after chemical separation. A 54 cm³ intrinsic Ge detector coupled to 1024-channel analyser was used. Using the average lung content and the daily average intake values of thorium through inhalation, the clearance half-time from lung was estimated.     

An improved method for the determination of S-Carboxymethyl-L-cysteine in biological fluids with precolumn derivatization and on-line clean-up

Summary In order to follow levels of S-Carboxymethyl-L-cysteine in biological fluids for a period as long as three half-lives after drug administration during pharmacokinetic studies, an improved method for its determination had to be developed. Like the previous one, this method uses a protein precipitation step followed by an O-Phthalaldehyde derivatization step and then an HPLC on-line clean-up. This latter was obtained by means of a switching valve system, including a Nucleosil CN 5 m (3 cm × 4.6 mm i.d.) precolumn and a Spherisorb ODS 5 m (15 cm×4.6 mm i.d.) analytical column. The sensitivity limit was improved to 0.1 g/ml in plasma samples and 0.2 g/ml in urine samples.This method was applied in studies comparing single (0.75 g) and repeated (0.75 g tid) oral administration of the drug to 30 elderly patients and 20 healthy volunteers. Results showed that the half-life was 40% longer in elderly patients than in healthy volunteers, and that area under the plasma concentration versus time curve (AUC) values in elderly patients were twice those obtained with young subjects.     

Fallout analysis of atmospheric water precipitations

Summary A rapid ion-exchange method for the determination of ¹⁴⁴Ce, ¹³⁷Cs, ⁸⁹Sr, ⁹⁰Sr and ¹⁴⁰Ba in 2–30 liter samples of atmospheric water precipitations is described. The samples, containing up to 300 mg of calcium, are sorbed on a specially shaped column filled with Dowex 50, X-8 or Dowex 50W, X-8. Radio-cerium and radio-caesium are stripped from the column with 0.6 M ammonium glycolate/ 0.2 M NaCl, pH 5, radio-strontium and radio-barium with 0.15 M ammonium citrate, pH 7.5. The isolated radio-nuclides are counted on a low-background beta-counter: ¹⁴⁴Ce as CeO₂, ¹³⁷Cs as Cs-dipicrylaminate, ⁸⁹Sr/⁹⁰Sr as SrCO₃, ⁹⁰Y as Y₂O₃, and ¹⁴⁰Ba as BaCO₃. The mean chemical yields amount to 95% for cerium, 85% for caesium, 95% for strontium, 95% for yttrium and 65% for barium. With parallel determinations at levels of a few picocuries, the deviations of the results from the respective mean values generally do not exceed ± 5%. With a 30 l sample the limit of detection amounts to 0.005 Ci/l for ¹⁴⁴Ce, 0.006 Ci/l for ¹³⁷Cs, 0.005 Ci/l for ⁹⁰Sr, and 0.006 Ci/l for ¹⁴⁰Ba.

---

Zusammenfassung Es wird eine schnelle Ionenaustauschmethode für die Bestimmung von ¹⁴⁴Ce, ¹³⁷Cs, ⁸⁹Sr, ⁹⁰Sr und ¹⁴⁰Ba in 2–30 l Proben von atmosphärischen Wasser-Niederschlägen beschrieben. Die Proben, mit einem Calciumgehalt bis zu 300 mg, werden in eine besonders gestaltete, mit Dowex 50, X-8 oder Dowex 50 W, X-8 gefüllte Säule eingewaschen. Radio-Cer und Radio-Caesium werden mit 0,6 M Ammoniumglykolat/0,2 M NaCl, pH 5, Radio-Strontium und Radio-Barium mit 0,15 M Ammoniumcitrat pH 7,5 eluiert. Die isolierten Radio-Nuklide werden in einem Beta-Antikoinzidenzzähler gemessen: ¹⁴⁴Ce als CeO₂, ¹³⁷Cs als Cs-dipikrylaminat, ⁸⁹Sr/⁹⁰Sr als SrCO₃, ⁹⁰Y als Y₂O₃ und ¹⁴⁰Ba als BaCO₃. Die mittlere Rückgewinnung der zugesetzten Träger beträgt für Cer 95%, 85% für Caesium, 95% für Strontium, 95% für Yttrium und 65% für Barium. In Parallelbestimmungen mit Gehalten von einigen Ci/l, überschreiten die Abweichungen der Ergebnisse von den entsprechenden Mittelwerten im allgemein nicht 5%. Bei einer 30 l-Probe beträgt die untere Nachweisgrenze 0,005 Ci/l für ¹⁴⁴Ce, 0,006 Ci/l für ¹³⁷Cs, 0,005 Ci/l für ⁹⁰Sr und 0,006 Ci/l für ¹⁴⁰Ba.

     

The composition of volatile and particulate hydrocarbons in urban air

Summary The hydrocarbon composition of the particle and gas phases in the urban atmosphere has been studied by filtration and parallel adsorption on active charcoal and polyurethane foam (PUF). Gas chromatography (GC) and GC coupled to mass spectrometry (GC-MS) have been used for the analysis of the organic matter extracts obtained with each system. In the case of the particle and PUF samples these extracts were fractionated into aliphatic and aromatic compounds. This approach has allowed to identify up to 247 hydrocarbon molecules showing that C0–C5 alkylbenzenes are the major compounds in the charcoal extracts whereas C14–C23 n-alkanes, C0–C4 alkylnaphthalenes, C0–C4 alkylbiphenyls and C3–C5 alkylbenzenes are those predominantly found in the PUF materials. The particles essentially contain C17–C38 n-alkanes and parent polycyclic aromatic hydrocarbons (PAH). These qualitative differences are paralleled by a progressive concentration decrease from the more to the less volatile hydrocarbons. Thus, the total charcoal extracts average 80 g/m³, the PUF compounds represent 4 /m³ and the particle hydrocarbons 0.7 g/m³. These latter airborne materials are essentially composed of petrogenic residues 0.6 g/m³ (aliphatic fraction) whereas the pyrolytic PAH only involve 0.08 g/m³.     

Didactic experiment of a one-dimensional process of solidification from nuclei at random to a linear polycrystal. Part I: Nuclei,nuclei distances,and grain lengths

We show theexperimental verification of a didactic model which is named one-dimensional (1D) process of solidification (crystallization) from nuclei at random to linear polycrystal.This one-dimensional model assumes: 1) Nuclei are distributed at random. 2) From these the grains start to grow instantaneously, circularly, and with the same and constant growth rate. 3) Growth stops where two grains touch. This model was theoretically treated by Schulze [1,2] and about 20 statements were derived; here, these statements were experimentally verified. To that end, the 1D model is experimentally approximated by a spun filament of 15-m diameter. The filament consists of polypropylene and, therefore, the grains are spherulites; it is embedded in a glue, which acts as a capillary tube. A later heat-treatment of the embedded filament (including melting, nucleation, grain (spherulite) growth) finally shows the nuclei, the nuclei distances, and the grain (spherulite) lengths. These values are measured: there are 1601 nuclei and the mean nuclei distance (and the mean grain length) is 361 m. The growth rate of the grain (spherulite) is 4.15 m/min. A comparison between theory and experiment shows agreement.     

Separation of linear gramicidins using carbon dioxide-containing mobile phases

Packed-column supercritical-fluid chromatography (pSFC) is presented as a novel method for separating and analyzing gramicidin samples. By use of methanol-modified carbon dioxide as a mobile phase the pentadecapeptides gramicidin A (gA), gramicidin B (gB), and gramicidin C (gC) are readily separated and eluted from a PRP-1 poly(styrene–divinylbenzene) column. Although optimum separation conditions are typically achieved near a column temperature of 40°C, a column pressure of 11 MPa, and 30% methanol modifier, pressure and modifier gradients around these values are also found to improve the overall separation time. Measurements indicate that the mobile phase solubility of gramicidin under these conditions is 5.0±0.4 g mL^–1. Collection of individual peaks during chromatography achieved analytical-scale isolation of 2 g refined gC from 20 g injected gramicidin D. Further, supercritical-fluid extraction of 200 g gramicidin D from a Chromosorb 102 support packed into the vessel produced 57 g gA in 90% purity. The results establish that carbon dioxide-based mobile phases can be successfully used for the separation of individual gramicidin species.     

Application of high resolution ICP-spectrometry to the determination of B,Be, Co,Mo and Sn in soils and similar matrices

The most sensitive emission lines for the elements B, Be, Co and Mo are strongly influenced by disturbing emission lines of Fe using normal optical resolution. The advantages of high resolution, applying the new ICP-spectrometer JY 38 Plus (Jobin-Yvon, France) with the 2400 lines/mm grating measuring in the 1st and 2nd order will be discussed. Beside the concentrations in soils, sediments and sludges, applying aqua regia and HF decomposition methods, the detection limits in these matrices will be given. The possibilities of ICP-spectrometry for the determination of the above-mentioned elements are shown at the examples of SRMs (standard reference materials). The materials used here were three soils and three sludges from the BCR (Community Bureau of Reference, European Communities) and one sediment from NBS (National Bureau of Standards, USA). For example, the most sensitive and normally used line for the determination of boron at 249.7733 nm cannot be used in case of this type of matrix due to normally high Fe-concentrations and due to a strong Fe-interference. Therefore, it is necessary to use the line at 249.6778 nm, where an interference-free measurement can be achieved in case of high optical resolution. The measured B-contents in these samples are in the range of 20 to 60 g/g, for Co in the 10 g/g region, for Be well below 1 g/g, for Sn between 3 and 400 g/g. Mo was only detectable in the sludge samples (limit of determination 0.5 g/g).Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Enzymatische Mikrobestimmung basischer Aminos?uren

Zusammenfassung Eine Apparatur und Arbeitstechniken zur konduktometrischen Bestimmung von Kohlendioxidmengen im Bereich von 1–20 g werden beschrieben. Die Standardabweichung der Bestimmung beträgt etwa 0,3 g CO₂. Bei Verwendung entsprechender Decarboxylasen können Arginin, Histidin und Lysin im gleichen Konzentrationsbereich mit einer Standardabweichung von etwa 1 g bestimmt werden.

---

Summary An apparatus and techniques for the conductometric determination of carbon dioxide in amounts from 1 to 20 g are described. The standard deviation of the determination is about 0.3 gmg of CO₂. Arginine, histidine and lysine can be determined in the same range of concentration with a standard deviation of about 1 g after enzymatic decarboxylation.

---

---

Der Verband der Chemischen Industrie unterstützte die Untersuchungen in dankenswerter Weise durch Sachspenden (Operationsverstärker, Programmkartengeber).

---

Herrn Prof. Dr. W. Geilmann zum 75. Geburtstag gewidmet.     

Uranium and thorium determination in Brazilian coals by epithermal neutron activation analysis

An experimental technique has been developed to determine impurities in coal. Uranium was determined by counting the²³⁹Np 106.1 keV -ray with a LEPS detector and thorium by counting the²³³Pa 311.8 keV -ray with a Ge(Li) detector. Seventeen coal samples were analyzed with an average precision of 3% and a quantitative determination limit of 0.153 g/g for uranium and 0.078 g/g for thorium. The technique allows determinations of up to twenty elements besides U and Th and can be applied in routine analysis.     

Microdetermination of calcium, strontium and barium using the ring-oven method

Summary The ring-oven technique is recommended for the identification and determination of Ca, Sr and Ba in the micro scale. The elements are first converted into their nitrates and Ca is washed out by a mixture of absolute alcohol and ether. Sr is then separated from Ba as soluble diethyldithiocarbamidate in alcohol-ether. The rings obtained are developed by rhodizonate (Sr, Ba) and pyrogallol (Ca). Quantitative determinations are possible by comparison with standard rings. 0.60 g of Ca, 1.31 g of Sr and 8.24 g of Ba can be determined with an error lower than 6%.

---

Zusammenfassung Zur Trennung und Bestimmung von Ca, Sr und Ba im Mikromaßstab wird die Ringofen-Technik empfohlen. Die drei Elemente werden dabei zunächst in die Nitrate übergeführt und Ca mit Äther-Alkohol ausgewaschen. Sr und Ba werden anschließend mit Diäthyldithiocarbamidat behandelt und Sr mit Äther-Alkohol abgetrennt. Die Identifizierung erfolgt mit Pyrogallol (Ca) bzw. Rhodizonat (Sr, Ba). Durch Vergleich mit Standardproben ist eine quantitative Bestimmung möglich. Hierbei können noch 0,60 g Ca, 1,31 g Sr und 8,24 g Ba mit einem Fehler < 6% erfaßt werden.

     

Kinetic study of Pt-cytostatics reactions by HPLC

HPLC with DAD (diode array detector) was applied as rapid method for the analytical control of the purity and stability of carboplatin and oxocarboplatin as effective cytostatics of 2nd generation. The stability of carboplatin has been measured in some infusion media (sodium chloride, glucose, sodium citrate) and compared to the cisplatin (cytostatic of 1st generation) stability. In addition ligand-exchange reactions between cisplatin and carboplatin have been studied together with the influence of temperature, pH and the concentrations of reactants. A method was developed for the analysis of clinical samples using solid-phase extraction as a preseparation and preconcentration step. The detection limits were 5 g/ml serum for cisplatin, 0.16 g/ml for carboplatin and 0.23 g/ml for oxo-carboplatin.Dedicated to Professor J. F. K. Huber on the occasion of his 65th birthday     

The oxidative addition of hydrogen sulfide to the electron-rich triple bond: The isolation and characterization of compounds that contain the Re2(μ-H)(μ-SH) cluster unit

The reactions of Re₂X₄(-dppm)₂ (X=Cl or Br; dppm=Ph₂PCH₂PPh₂) with H₂S in THF afford the dirhenium (III) complexes Re₂(-H)(-SH)X₄(-dppm)₂, the first examples of the oxidative addition of an S-H unit across an electron-rich metal-metal triple bond. The bromide complex Re₂(-H)(-SH)Br₄(-dppm)₂ (C₂H₅)₂O crystallizes in the space group P2₁/n witha=16.631(2) Å,b=15.967(3) Å,c=19.904(2) Å, =92.698(7)°,V=5279(2) ų, andZ=4. The structure which was refined toR=0.053 (R _w=0.070) for 4903 data withI>3.0(I), shows the presence of an edge-shared bioctahedral geometry with a very short Re-Re distance of 2.4566(7) Å. While the hydrogen atoms of the -H and -SH ligands were not located in the X-ray structure determination, their presence is confirmed by IR and¹H NMR spectroscopy.     

Diacetylenic Derivatives of Fe2(CO)6(μ-EE′): Spectroscopic Investigations of Fe2(CO)6{μ-EC(H) = C(C≡ CMe)E′} (E = E′, E ≠ E′; E, E′ = S, Se, Te)

The diacetylenic adducts, Fe₂(CO)₆{-EC(H) = C(C CMe)E} (E = E, E E; E, E = S, Se, Te) (1–8) have been obtained from the room temperature stirring of Fe₂(CO)₆(-EE) with HC CC CMe in methanol solvent containing sodium acetate. Compounds 1–8 have been characterized by IR and multinuclear NMR (¹H, ¹³C, ⁷⁷Se, and ^l25Te) spectroscopy. Trends in the chemical shifts of ⁷⁷Se and ¹²⁵Te NMR spectra of Fe₂(CO)₆{-EC(H) = C(C CMe)E} with a variation of EE are discussed.     

The determination of tin,chlorine, and fluorine in six japanese sedimentary standards

Concentrations of tin, chlorine, and fluorine in six new Geological Survey of Japan (GSJ) sedimentary standards are reported. Tin was determined using graphite furnace atomic absorption spectrometry (GFAAS), following a lithium metaborate (LMB) fusion of the rock material. Chlorine and fluorine were determined using ion-selective electrode (ISE) potentiometry following an acid digestion and a LMB fusion, respectively. The methods employed are briefly described and determination limits in the rock of 0.2 g/g for tin, 10 g/g for chlorine, and 100 g/g for fluorine are reported. The precision obtained for the six sedimentary standards, expressed as %relative standard deviation, averaged 5.3% over the range of 2-200 g/g tin, 5.8% over the range of 20–65 g/g chloride, and 1.7% over the range of 100–4500 g/g fluoride, all in the rock. This compares favorably to the precision obtained for international geologic reference materials determined concurrently with the GSJ sedimentary standards. The values of tin, chloride, and fluoride obtained for the international reference materials were in favorable agreement with the recommended literature values.