Synthesis of nanoparticles and suspensions by pulsed laser ablation of microparticles in liquid

Recent studies demonstrated that the process to produce metal and oxide nanoparticles by laser ablation of consolidated microparticles is a convenient and energy-efficient way to prepare nanoparticles. In this work, the novel process is applied to nanoparticle synthesis in the liquid environment and the results are compared with those by the gas-phase process. Metal and oxide nanoparticles are synthesized by pulsed laser ablation of the compacted metal microparticles using a Q-switched Nd:YAG laser in water. It is shown that the process is effective for preparing nanoparticle suspensions having relatively uniform size distributions. While the laser fluence and the degree of compaction strongly influence the size of the produced nanoparticle in air, the sedimentation time is shown to be the most critical factor to determine the mean size of the suspended particles.     

Laser ablation of microparticles for nanostructure generation

The process of laser ablation of microparticles has been shown to generate nanoparticles from microparticles; but the generation of nanoparticle networks from microparticles has never been reported before. We report a unique approach for the generation of nanoparticle networks through ablation of microparticles. Using this approach, two samples containing microparticles of lead oxide (Pb₃O₄) and nickel oxide (NiO), respectively, were ablated under ambient conditions using a femtosecond laser operating in the MHz repetition rate regime. Nanoparticle networks with particle diameter ranging from 60 to 90 nm were obtained by ablation of microparticles without use of any specialized equipment, catalysts or external stimulants. The formation of finer nanoparticle networks has been explained by considering the low pressure region created by the shockwave, causing rapid condensation of microparticles into finer nanoparticles. A comparison between the nanostructures generated by ablating microparticle and those by ablating bulk substrate was carried out; and a considerable reduction in size and narrowed size distribution was observed. Our nanostructure fabrication technique will be a unique process for nanoparticle network generation from a vast array of materials.     

Heterogeneous Nanoassembling: Microfluidically Prepared Poly(methyl methacrylate) Nanoparticles on Ag Microrods and ZnO Microflowers

The heterogeneous assembly of colloidal polymer particles on the nano‐ and microstructures of a metal is a versatile platform for adjusting the mechanical and electrical properties simultaneously. The assemblies of silver (Ag) microrods and flower‐like zinc oxide (ZnO) microparticles with poly(methyl methacrylate) (PMMA) nanospheres are presented to prepare advanced composite materials. PMMA nanoparticles are prepared via the emulsion polymerization technique using a microfluidic preparation step in the presence of cationic surfactant. The surface charge of PMMA particles determines the binding interaction strength with inorganic constituents. Ag microrods and ZnO microparticles are prepared in a batch and in a continuous flow process, respectively. The assembling process can be explained by a particle–particle binding process due to the electrostatic interaction for both types of nanoassemblies. The observed binding pattern reveals certain lateral mobility of the small polymer particles at the surface of larger metal particle. The particle ratios in the nanoassemblies can be tuned over a wide range by changing the reaction parameters.     

Electrochemical determination of levodopa in the presence of ascorbic acid by polyglycine/ZnO nanoparticles/multi-walled carbon nanotubes-modified carbon paste electrode

Ionics - This work report on electrodeposition of polyglycine microparticles onto zinc oxide (ZnO) nanoparticles/multi-walled carbon nanotube-modified carbon paste electrode surface in order to...     

Hydroxylapatite nanoparticles obtained by fiber laser-induced fracture

This work presents the results of laser-induced fragmentation of hydroxylapatite microparticles in water dissolution. Calcined fish bones in form of powder, which were previously milled to achieve microsized particles, were used as precursor material. Two different laser sources were employed to reduce the size of the suspended particles: a pulsed Nd:YAG laser and a Ytterbium doped fiber laser working in continuous wave mode. The morphology as well as the composition of the obtained particles was characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy and conventional and high resolution transmission electron microscopy (TEM, HRTEM). The results show that nanometric particles of hydroxylapatite and β-tricalcium phosphate as small as 10 nm diameter can be obtained.     

Laser energy density, structure and properties of pulsed-laser deposited zinc oxide films

Zinc oxide thin films were deposited on soda lime glass substrates by pulsed laser deposition in an oxygen-reactive atmosphere at 20 Pa and a constant substrate temperature at 300 °C. A pulsed KrF excimer laser, operated at 248 nm with pulse duration 10 ns, was used to ablate the ceramic zinc oxide target. The structure, the optical and electrical properties of the as-deposited films were studied in dependence of the laser energy density in the 1.2-2.8 J/cm² range, with the aid of X-ray Diffraction, Atomic Force Microscope, Transmission Spectroscopy techniques, and the Van der Pauw method, respectively. The results indicated that the structural and optical properties of the zinc oxide films were improved by increasing the laser energy density of the ablating laser. The surface roughness of the zinc oxide film increased with the decrease of laser energy density and both the optical bang gap and the electrical resistivity of the film were significantly affected by the laser energy density.     

Effect of laser annealing using high repetition rate pulsed laser on optical properties of phosphorus-ion-implanted ZnO nanorods

The effect of high repetition rate pulsed laser annealing with a KrF excimer laser on the optical properties of phosphorus-ion-implanted zinc oxide nanorods has been investigated. The recovery levels of phosphorus-ion-implanted zinc oxide nanorods have been measured by photoluminescence spectra and cathode luminescence images. Cathode luminescence disappeared over 300 nm below the surface due to the damage caused by ion implantation with an acceleration voltage of 25 kV. When the annealing was performed at a low repetition rate of the KrF excimer laser, cathode luminescence was recovered only in a shallow area below the surface. The depth of the annealed area was increased along with the repetition rate of the annealing laser. By optimizing the annealing conditions such as the repetition rate, the irradiation fluence and so on, we have succeeded in annealing the whole damaged area of over 300 nm in depth and in observing cathode luminescence. Thus, the effectiveness of high repetition rate pulsed laser annealing on phosphorus-ion-implanted zinc oxide nanorods was demonstrated.     

Kinetics of light scattering in an epoxy resin suspension of carbon microparticles

The relaxation kinetics of laser-induced scattering and absorption was investigated in a liquid epoxy resin suspension of carbon microparticles. The scattered light intensity and the optical transmittance at temperatures below +10°C demonstrate anomalous kinetics with a distinct build-up stage. The observed behavior is interpreted as a manifestation of processes of mechanical stress relaxation in epoxy layers around microbubbles. The microbubbles induced by laser irradiation of the suspension can be a tool for the investigation of mechanical stress relaxation in polymers.     

Near-field-enhanced,off-resonant laser sintering of semiconductor particles for additive manufacturing of dispersed Au–ZnO-micro/nano hybrid structures

Off-resonant near-field enhancement by gold nanoparticles adsorbed on crystalline zinc oxide significantly increases the energy efficiency of infrared laser sintering. In detail, ten different gold mass loads on zinc oxide were exposed to 1,064 nm cw-laser radiation. Variation of scan speed, laser power, and spot size showed that the energy threshold required for sintering decreases and sintering process window widens compared to laser sintering of pure zinc oxide powder. Transmission electron microscope analysis after focused ion beam cross sectioning of the sintered particles reveals that supported gold nanoparticles homogenously resolidify in the sintered semiconductor matrix. The enhanced sintering process with ligand-free gold nanoparticles gives access to metal–semiconductor hybrid materials with potential application in light harvesting or energy conversion.     

Neutral particle emission from zinc oxide surface induced by high-density electronic excitation

Emission of neutral zinc and oxygen atoms and oxygen molecules emitted from zinc oxide surface by laser irradiation have been measured. It is found that the emission intensity starts to increase when the laser intensity exceeds a certain threshold value, indicating that the particle emission is a high density electronic excitation effect. The energy spectrum of emitted particles is found not to follow the Maxwellian distribution.     

Influence of processing time on nanoparticle generation during picosecond-pulsed fundamental and second harmonic laser ablation of metals in tetrahydrofuran

The influence of fundamental and second harmonic wavelength on ablation efficiency and nanoparticle properties is studied during picosecond laser ablation of silver, zinc, and magnesium in polymer-doped tetrahydrofuran. Laser ablation in stationary liquid involves simultaneously the fabrication of nanoparticles by ablation of the target material and fragmentation of dispersed nanoparticles by post irradiation. The ratio in which the laser pulse energy contributes to these processes depends on laser wavelength and colloidal properties. For plasmon absorbers (silver), using the second harmonic wavelength leads to a decrease of the nanoparticle productivity over process time along with exponential decrease in particle diameter, while using the fundamental wavelength results in a constant ablation rate and linear decrease in particle diameter. For colloids made of materials without plasmon absorption (zinc, magnesium), laser scattering is the colloidal property that limits nanoparticle productivity by Mie-scattering of dispersed nanoparticle clusters.     

压电式纳米发电机的原理和潜在应用

纤锌矿结构氧化锌纳米线具有半导体性能和压电效应。用导电的原子力显微镜探针针尖去弯曲竖直生长的氧化锌纳米线，在纳米线的内部和外部分别造成压缩和拉伸，这种独特结构导致了弯曲纳米线的内外表面产生反极性的极化电荷，借助半导体性质的氧化锌纳米线和其金属尖部的肖特基势垒将电能暂时储存在氧化锌纳米线内，并可用导电的原子力显微镜探针接通这一电源，向外界输电，从而完美地实现了在纳米尺度上把机械能转化为电能。该纳米发电机的发电效率可以达到17％-30％，此项重要的科学发现将为自发电式纳米器件奠定物理基础。文章介绍了它的工作原理和潜在应用。     

Synthesis of nanoparticles by pulsed laser ablation of consolidated metal microparticles

This paper describes a novel process of nanoparticle synthesis by pulsed laser ablation of consolidated microparticles. Metal microparticles, including Cu, Al and Ag, are consolidated by a cold isobaric press with pressures up to a few hundred MPa before laser irradiation. Nanoparticles are then synthesized in air by high-power pulsed laser ablation of the microparticles using a Q-switched Nd:YAG laser. It is shown that the degree of compaction plays a significant role in determining the size of the produced nanoparticles. The effect of laser fluence and collector position on the distribution of particle size is examined. Photoacoustic deflection probing and nanosecond time-resolved visualization indicate that the novel process attains increased efficiency of laser-energy coupling with the target. PACS 81.07.-b; 81.07.Wx; 42.62.Cf     

Laser and ion beams graphene oxide reduction for microelectronic devices

Reduced graphene oxide (rGO) is a two-dimensional material, which is attracting increasing attention due to its special properties. It can be obtained by laser or ion beam irradiations of pristine graphene oxide (GO). It shows high mechanical resistance, considerable electric and thermal conductivity. All these rGO characteristics together with the high number of molecular species that can be embedded between its layers, make graphene oxide a potential material for electronic sensors or efficient support on which conductive strips, condensers, and micrometric electronic devices can be designed. In particular, as it is described in this paper, it is possible to carry out high spatial resolution lithography in GO by using a focused laser or micro ion beam in order to design macro, micro, and submicron geometrical structures. The use of the reduced graphene oxide for the laser and ion beam fabrication of electrical resistances and capacitances is presented.     

Structure and stability of small zinc oxide clusters

The structure and stability of small neutral and positively charged zinc oxide (ZnO) _n clusters (n = 2−9) have been studied within the density functional theory. For n ≤ 7, the most stable clusters are shown to be flat rings; for n = 8, 9, the clusters are mainly three-dimensional cage structures. The energies and main channels of fragmentation of the clusters have been determined. It has been found that the fragmentation of the charged clusters with n > 6 occurs predominantly with formation of a (ZnO)₄⁺ ion, which explains the available mass spectrometric data on ionization of the zinc oxide clusters by electron impact.     

Optical and Electrophysical Properties of Thin Zinc Oxide Films Doped with Manganese Oxide and Obtained by Laser Deposition

Journal of Applied Spectroscopy - Nanostructured thin films on a silicon substrate were obtained on a ceramic of zinc oxide doped with manganese oxide by high-frequency periodic pulsed laser action...     

Efficient Synthesis of Submicrometer-Sized Active Pharmaceuticals by Laser Fragmentation in a Liquid-Jet Passage Reactor with Minimum Degradation

One challenge in the development of new drug formulations is overcoming their low solubility in relevant aqueous media. Reducing the particle size of drug powders to a few hundred nanometers is a well-known method that leads to an increase in solubility due to an elevated total surface area. However, state-of-the-art comminution techniques like cryo-milling suffer from degradation and contamination of the drugs, particularly when sub-micrometer diameters are aspired that require long processing times. In this work, picosecond-pulsed laser fragmentation in liquids (LFL) of dispersed drug particles in a liquid-jet passage reactor is used as a wear-free comminution technique using the hydrophobic oral model drugs naproxen, prednisolone, ketoconazole, and megestrol acetate. Particle size and morphology of the drug particles are characterized using scanning electron microscopy (SEM) and changes in particle size distributions upon irradiation are quantified using an analytical centrifuge. The findings highlight the superior fragmentation efficiency of the liquid-jet passage reactor setup, with a 100 times higher fraction of submicrometer particles (SMP) of the drugs compared to the batch control, which enhances solubility and goes along with minimal chemical degradation (<1%), determined by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), high-performance liquid chromatography (HPLC), and X-ray diffraction (XRD). Moreover, the underlying predominantly photo-mechanically induced laser fragmentation mechanisms of organic microparticles (MP) are discussed.     

Synthesis of p-type zinc oxide films by plasma-assisted pulsed laser deposition

Heavily acceptor doped zinc oxide (ZnO) films were deposited on quartz substrates by plasma-assisted pulsed laser deposition (PA-PLD) using a non-sintered target heavily doped with phosphorus or copper and radio frequency induction-coupled nitrogen or oxygen plasma (RF-ICP). The p-type ZnO layer was achieved by a nitrogen acceptor dopant using the technique of plasma-assisted nitrogen (PA-N) pulsed laser deposition. Photoluminescence spectra showed a peak from phosphorus- or copper-bound excitons at about 380 nm and a broad, green defect-related band occurring at about 550 nm. Transmission spectra showed a blue shift of the near-band-edge wavelength and a worsening of transmission by heavily copper-doped zinc oxide.     

Picosecond nonlinear optical properties of cuprous oxide with different nano-morphologies

Cuprous oxide nanoclusters, microcubes and microparticles were successfully synthesized by a simple co-precipitation method. Phase purity and crystallinity of the samples were studied by using X-ray powder diffraction. Transmission electron microscopy (TEM) images show different morphologies like nanoclusters, microcubes and microparticles. For linear and nonlinear optical measurements, the as-synthesized Cu₂O with different morphologies were dispersed in isopropanol solution. The absorption spectrum recorded in the visible regions shows peaks that depend on the morphology of the particles and the peak shifts towards red region as one goes from nanoclusters to microparticles. Simple open-aperture Z-scan technique is used to measure nonlinear optical properties of cuprous oxide at 532 nm, 30 ps excitation at 10 Hz repetition rate. Cuprous oxide nanoclusters show reverse saturable absorption (RSA) behaviour, the microcubes and microparticles at a similar concentration exhibit saturable absorption (SA) type of behaviour at lower peak intensities and exhibit RSA within SA at higher peak intensities. The results show that the transition from SA to RSA can be ascribed to the two-photon absorption (TPA) process.     

Influence of nanometer scale film structure of ZDDP tribofilm on Its mechanical properties: A computational chemistry study

We investigated the influence of a nanometer scale film structure of a tribofilm generated from zinc dialkyldithiophosphate (ZDDP) anti-wear additive on its mechanical properties using a combined molecular dynamics (MD) and finite element (FE) method. The frictional behavior of an interface between a native iron oxide layer on steel surface and zinc metaphosphate - regarded as a model material of ZDDP tribofilm - was firstly studied using the MD method. The results showed that the iron atoms in the oxide layer diffused into the phosphate layer during the friction process. The zinc atoms in the phosphate layer also diffused into the oxide layer. Significant interdiffusion of iron and zinc atoms was observed with increasing simulation time. Thus, metallic phosphate with a gradient composition of iron and zinc atoms was formed on the phosphate/oxide interface. We then constructed an axisymmetric nanoindentation simulation model from the MD-derived structures at a certain simulation time and carried out a FE calculation. As a result, we found that the rubbed ZDDP tribofilm, including the phosphate with the gradient composition of metallic atoms, showed larger contact stiffness and hardness. The combined MD/FE simulation indicates that the tribofilm becomes stiffer and harder due to the interdiffusion of iron and zinc atoms on the tribofilm/oxide interface. We have found that the gradient composition formation in ZDDP tribofilm during friction process influences on its mechanical properties.