静电纺丝法制备聚丙烯腈/聚苯胺复合纳米纤维及其表征

利用静电纺丝技术,以聚丙烯腈(PAN)和苯胺(ANI)为前驱物,用过硫酸胺(APS)溶液在低温下缓慢氧化聚合,制备了PAN/PANI复合纳米纤维,直径约500 nm.通过扫描电子显微镜(SEM)、红外光谱(FTIR)、X射线衍射(XRD)和激光拉曼(RAMAN)光谱仪等测试手段对材料的形貌和结构进行了表征.探讨了材料制备过程中影响纤维形貌、尺寸、均匀度的因素和PANI含量对复合纤维导电性能的影响,结果表明,PAN浓度、ANI的加入量和电压是影响纤维特性的主要因素;PANI在PAN基体中呈纳米尺寸分布,复合纳米纤维具有良好的导电性能,导电率可达10-2S/cm.     

Synergistical assembly of multiwalled carbon nanotubes/polyaniline network for dye‐sensitized solar cells

In this study, an aniline (ANI) solution containing well‐dispersed multiwall carbon nanotubes (CNTs) has been prepared. With an aim of improving the dispersability of CNTs in ANI monomer, we synthesize CNTs/ANI complexes using a reflux technique which can be electrochemically polymerized to form well‐dispersed CNTs/polyaniline (PANI) films. The refluxed CNTs/ANI solution can be used to prepare high porous CNTs/PANI network via an electrochemical polymerization for applying as counter electrodes in dye‐sensitized solar cells. Compared with the pristine PANI, the multiwalled CNTs/PANI network shows more porous morphology and higher electrocatalytic activity, resulting in the acceleration of the reaction (triiodide (I^3?) to iodide (I^?)) of the redox electrolyte. The enhancement of the electrocatalytic activity is attributed to the interactions between multiwalled CNTs and PANI, promoting the quinoid ring structure and thus enhancing the conductivity of the polymer chains. The device, assembled with multiwalled CNTs/PANI network as counter electrodes, delivers 7.67% power conversion efficiency, which is comparable to 7.43% of that with Pt. Copyright © 2014 John Wiley & Sons, Ltd.     

Polymerization of aniline in the interlayer space of molybdenum trioxide and its electrochemical properties

Molybdenum trioxide/polyaniline (MoO₃/PANI) composite was prepared first by ion-exchange reaction between aniline (ANI) and dodecylamine (DDA) which was intercalated precursor, and then was formed under the polymerization of ANI within the interlayer space of MoO₃ at 120 °C for 3 d in air. According to powder X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, infrared spectroscopy and electrochemical testing, MoO₃/PANI composite has layered structure, and its interlayer spacing is 1.127 nm. Moreover, it has high thermal stability with the compound and completes its weight loss at 751.9 °C. Electrochemical investigation shows that MoO₃ is the major active substance in the MoO₃/PANI electrode, and MoO₃/PANI electrode demonstrates better conductivity and electrochemical activity than pure MoO₃ electrode, attributed to the promotion of Li⁺ and/or electron transport. In addition, the alternating current impedance proves that if the resistance of MoO₃/PANI electrode reduces apparently, the electrochemical activity will increase correspondingly, the same as the relationship between the ohmic resistance and the electrical conductivity.     

Polyaniline-coated coconut fibers: Structure,properties and their use as conductive additives in matrix of polyurethane derived from castor oil

Electrically conducting fibers based on coconut fibers (CF) and polyaniline (PANI) were prepared through in situ oxidative polymerization of aniline (ANI) in the presence of CF using iron (III) chloride hexahydrate (FeCl_3.6H₂O) or ammonium persulfate (APS) as an oxidant. The PANI-coated coconut fibers (CF-PANI) displayed various morphologies, electrical conductivities and percentages of PANI on the CF surface. For both systems, a PANI conductive layer was present on the CF surface, which was responsible for an electrical conductivity of around 1.5 × 10⁻¹ and 1.9 × 10⁻² S cm⁻¹ for composites prepared with FeCl₃.6H₂O and APS, respectively; values that are similar to that of pure PANI. In order to modify the structure and properties of polyurethane derived from castor oil (PU) both CF-PANI and pure PANI were used as conductive additives. The PU/CF-PANI composites exhibited higher electrical conductivity than pure PU and PU/PANI blends. Additionally, the PU/CF-PANI composites showed a variation in electrical resistivity according to the compressive stress applied, indicating that these materials could be applied for pressure-sensitive applications.     

Catalytic reaction of 1-chloropropenyl butyl ethers with methyl diazoacetate

Catalytic reaction of trans- and cis-1-chloropropenyl butyl ethers with methyl diazoacetate catalyzed by either Rh₂(OAc)₃, or Cu(OTf)₂, or Cu(acac)₂ in the presence of the imidazolium salts [bmim]⁺ Cl^?, [bmim]⁺ BF ₄ ^? , and [bmim]⁺ PF ₆ ^? was studied. The composition and ratio of products formed was shown to depend on the reaction conditions and the nature and ratio of the components of the catalytic system.     

Effect of imidazolium salts on the catalytic reaction of 1,3-dioxolanes with methyl diazoacetate

Effect of imidazolium salts, [bmim]⁺Cl^?, [bmim]⁺BF₄ ^?, and [bmim]⁺PF₆ ^?, on the reaction of 1,3-dioxolanes with methyl diazoacetate in the presence of copper-containing catalysts was studied. The product composition was found to depend on the reaction conditions and the nature and ratio of components of the catalytic system.     

Association of ionic liquids in solution: a combined dielectric and conductivity study of [bmim][Cl] in water and in acetonitrile

Ion association of the ionic liquid [bmim][Cl] in acetonitrile and in water was studied by dielectric spectroscopy for salt concentrations c ≤ 1.3 M at 298.15 K and by measurement of molar electrical conductivities, Λ, of dilute solutions (c ≤ 0.006 M) in the temperature range 273.15 ? T/K ≤ 313.15. Whilst acetonitrile solutions of [bmim][Cl] exhibit moderate ion pairing, with an association constant of K°(A) ≈ 60 M(-1) and increasing with temperature, [bmim][Cl] is only weakly associated in water (K°(A) ≈ 6 M(-1)) and ion pairing decreases with rising temperature. Only contact ion pairs were detected in both solvents. Standard-state enthalpy, entropy and heat capacity changes of ion association were derived, as well as the activation enthalpy of charge transport and the limiting conductivity of the cation, λ(∞)?([bmim](+)). These data, in conjunction with effective solvation numbers obtained from the dielectric spectra, suggest that the solvation of [bmim](+) is much weaker in water than in acetonitrile.     

Silk‐Ion Jelly: a novel ion conducting polymeric material with high conductivity and excellent mechanical stability

In this work, a thin, flexible and mechanically stable polymer conducting material (Silk‐Ion Jelly) was developed though application of Ion Jelly on to silk fabrics. Ion Jelly was prepared through jellification of a room temperature ionic liquid, 1‐butyl‐3‐methyl‐imidazolium dicyanamide ([bmim][dca]) using gelatin and water and applied to silk fabrics using two different processes: impregnation and in‐situ. Various parameters influencing ionic conductivity such as Ion Jelly composition (ratio of [bmim][dca], water and gelatin) and incorporation as well as the type of application process were thoroughly investigated. It was observed that the Ion Jelly compositions containing lower gelatin and water ratio as well as application through in‐situ process at high temperature (200 °C) led to considerable improvement in conductivity, mainly due to increased [bmim][dca] concentration, structural flexibility and reduced silk crystallinity. Silk‐Ion Jelly prepared using optimized conditions showed excellent mechanical stability and possessed high room temperature conductivity (2.9 × 10^?3 S. cm^?1), similar to [bmim][dca], and therefore, this novel ion conducting material may find potential applications in electrochemical devices due to its eco‐friendly preparation route using biomaterials and green solvents. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and characterization of C60/polyaniline composites from interfacial polymerization

C₆₀/polyaniline (PANI) nanocomposites have been synthesized by the oxidative polymerization of aniline with ammonium peroxydisulfate in the presence of C₆₀ by using an interfacial reaction. When compared with the pure PANI nanofibers from the similar process, the diameter of the obtained C₆₀/PANI nanofibers was increased because of the encapsulation of C₆₀ into PANI during aniline polymerization, which resulted from the charge‐transfer interactions between C₆₀ and aniline fragment in PANI. In addition, the resulting C₆₀/PANI nanocomposites synthesized from the low initial C₆₀/aniline molar ratio (less than 1:25) showed the homogenous morphology composed of fiber network structures, which has an electrical conductivity as high as 1.1 × 10^?4 S/cm. However, the C₆₀/PANI nanocomposites from the higher initial C₆₀/aniline molar ratio (more than 1:15) showed the nonuniformly distributed morphology, and the electrical conductivity was decreased to 3.5 × 10^?5 S/cm. Moreover, the C₆₀/PANI nanocomposites from the interfacial reaction showed a higher value of electrical conductivity than the mechanically mixed C₆₀/PANI blends with the same C₆₀ content, because of the more evenly distributed microstructures. FTIR, UV–vis, and CV data confirmed the presence of C₆₀ and the significant charge‐transfer interactions in the resultant nanocomposites, which was responsible for the morphology development of the C₆₀/PANI and the variation of the electrical conductivity. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Recyclable zinc (II) ionic liquid catalyzed synthesis of azides by direct azidation of alcohols using trimethylsilylazide at room temperature

A new efficient method has been reported for the synthesis of azides by direct azidation of alcohols with TMSN₃ in presence of recyclable task specific ionic liquid (TSIL) [bmim]ZnCl₃ as a catalyst in DCM at room temperature. Ionic liquid [bmim]ZnCl₃ was synthesized under solvent free conditions and characterized by IR, ¹H NMR, ¹³C NMR and HRMS. The Lewis acidity of catalyst was also examined using IR spectroscopy. The main features of this new methodology are high yields of products, recyclability of catalyst, scalability of reaction to gram scale and short reaction time.     

Optical and Bioelectrochemical Characterization of Water‐Miscible Ionic Liquids Based Composites of Multiwalled Carbon Nanotubes

Acidic treated multiwalled carbon nanotubes (AMWNTs) were ground with water‐miscible room temperature ionic liquids, 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim]BF₄), and resulted in AMWNTs‐[bmim]BF₄ composite. Its electrical‐ionic conductivity and optical properties were compared with the other two types of carbon materials‐[bmim]BF₄ composites: pyrolytic graphite powder (PGP), pristine multiwalled carbon nanotubes (PMWNTs), through the ac impedance technology and Raman spectroscopy. The impedance data show that AMWNTs‐[bmim]BF₄ composite exhibits the highest conductivity. Raman spectra study exhibits that the [bmim]BF₄ can form gel with PMWNTs and AMWNTs but only form a viscous liquid with PGP. AMWNTs‐[bmim]BF₄ gel modified GC electrode was applied in direct electrochemistry of heme proteins (Hb and HRP) and it catalysis to the reduction of H₂O₂ was investigated.     

Optical Spectroscopic Studies on Structural Changes of Helical-rich Proteins in Aqueous Solutions of Ionic Liquids

We have investigated structural changes of myoglobin and cytochrome c, which are helical-rich proteins, in aqueous 1-butyl-3-methylimidazolium chloride ([bmim][Cl]) solutions by Fourier transform infrared and circular dichroism spectroscopy. At low [bmim][Cl] concentrations {X (mol% IL) < 10}, both proteins unfold. Remarkably, at high [bmim][Cl] concentrations (X > 10), myoglobin aggregates whereas cytochrome c refolds its α-helical structure. The tertiary structures of both proteins are disrupted over the entire range of studied [bmim][Cl] concentrations. Our results suggest that, in aqueous solutions at high [bmim][Cl] concentrations, the differences in structural transitions between myoglobin and cytochrome c might be due to the difference in hydration between these proteins.     

Polymerization of phenylacetylene catalysed by RhTp(cod) and RhBp(cod) in ionic liquids: effect of alcohols and of tetraammonium halides

RhTp(cod) ( 1 ) and RhBp(cod) ( 2 ), almost inactive in CH₂Cl₂, became good catalysts of phenylacetylene polymerization in ionic liquids ([bmim]Cl, [bmim]BF₄: bmim = 1‐butyl‐3‐methylimidazolium, [mokt]BF₄: mokt = 1‐methyl‐3‐oktylimidazolium, [bumepy]BF₄: 1‐butyl‐4‐methylpyridinium) and in CH₂Cl₂ in the presence of tetraammonium halides ([R₄N]X, R = Bu, Et; X = Cl, Br). The highest yields of polyphenylacetylene with catalyst 1 were obtained in [bmim]Cl at 65°C (64% after 2 h) and in [mokt]BF₄ at 20°C (56% after 24 h). In alcohols (CH₃OH, (CH₃)₂CHOH, (CH₃)₃COH) as solvents, up to 100% of the polymer was produced. When a mixture of an ionic liquid and CH₃OH was used as the reaction medium, the polymer yield was similar to the yield achieved in an ionic liquid only, but the molecular weight increased remarkably. Tetraammonium salts, [R₄N]X, are co‐catalysts for 1 , and the yield of the polymer increased in the order [Et₄N]Br < [Bu₄N]Br < [Et₄N]Cl < [Bu₄N]Cl. Polymers with molecular weights from 6900 to 38 800 Da were obtained with catalyst 2 in [R₄N]Br or [R₄N]Cl, whereas in ionic liquids ([bmim]Cl, [bmim]BF₄) the corresponding molecular weights were higher, from 51 300 to 60 300 Da. Copyright © 2004 John Wiley & Sons, Ltd.     

3-exo-tet Cyclization of 2,2-disubstituted 1,3-dihalopropanes with indium in aqueous and ionic liquid solvent system

The 3-exo-tet cyclization of 2,2-disubstituted 1,3-dihalopropanes with In powder in THF solution of 20% H₂O, dioxane solution of 20% H₂O, and ionic liquids, such as [bmim]Br, [bmim]Cl, and [bmin]BF₄, respectively, was efficiently carried out to form the corresponding 1,1-disubstituted cyclopropanes in good yields. The cyclopropanation of 2,2-disubstituted 1,3-dihalopropanes with In powder in ionic liquids, such as [bmim]Br, [bmim]Cl, and [bmin]BF₄, was markedly accelerated compared with that in a THF solution of 20% H₂O and a dioxane solution of 20% H₂O. The mechanism was proposed to involve the radical 3-exo-tet cyclization of the formed 3-halopropyl radical.     

Electropolymerization of ionic liquid substituted polyphenylene as supercapacitors materials

A new type of polyphenylene, ionic liquid (IL) 1,3-methylimidazolium hexafluorophosphate substituted, has been prepared by electrodeposition on Au electrode surface via pulse galvanostatic method in 1-butyl-3-methylimidazolium hexafluorophosphate solution. The obtained polymer film had a spherulitic morphology with smallest grains of around 500 nm. Infrared spectrometry revealed that polyphenylene was deposited to a certain extent. The capacitive behavior of the IL substituted polyphenylene was investigated by cyclic voltammetry (CV) and galvanostatic charge–discharge method in 0.2 mol L⁻¹ H₂SO₄ aqueous solutions or pure IL [bmim]PF₆. The specific capacitance of the polymer at the charge–discharge current density of 1 mA cm⁻² equaled 206 F g⁻¹ in acidic aqueous solution or 164 F g⁻¹ in [bmim]PF₆. Additionally, excellent charge–discharge cycle stability (over 85% value of specific capacitance remained after 600 charge–discharge cycles) and power characteristics of the polymer electrode were observed in both electrolytes.     

High-pressure phase behavior of CO2 + 1-butyl-3-methylimidazolium chloride system

The phase behavior of carbon dioxide (CO₂) and the ionic liquid (IL) 1-butyl-3-methylimidazolium chloride ([bmim][Cl]) was measured and correlated at high pressures up to ∼40 MPa and at temperatures between 353.15 K and 373.15 K. The solubility data of CO₂ in [bmim][Cl] were obtained by observing the bubble point pressure at specific temperatures. A variable-volume view cell, which is a high-pressure equilibrium apparatus, was used to measure the CO₂ + [bmim][Cl] system solubility under varying pressure and temperature conditions. In addition, liquid–liquid–vapor (LLV) three-phase behavior was investigated using the equilibrium cell to be able to determine the classification of phase-behavior type by Scott and Van Konynenburg. Based on the LLV phase behavior, this system most likely has type III phase-behavior which is common for IL + CO₂ systems. The resulting data showed that CO₂ dissolved well in the IL at low CO₂ concentrations, but that the pressure derivative of CO₂ solubility dramatically decreased as the mole fraction of CO₂ was increased. The experimental data were well fitted by the Peng–Robinson equation of state with a quadratic mixing rule and cubic parameters estimated by the Joback method.     

Iridium-catalyzed regiospecific allylation of dimethyl malonate in ionic liquids

Allylation of dimethyl malonate with 1-(4-chlorophenyl)prop-2-enyl methyl carbonate in the presence of [Pd(All)Cl]₂, [Rh(COD)Cl]₂, [Ir(COD)Cl]₂ (COD is cycloocta-1,5-diene), and a chiral ferrocenyl-containing phosphite ligand based on (R)-BINOL (BINOL is 2,2′-dihydroxy-1,1′-binaphthyl) in CH₂Cl₂ gave a mixture of linear and branched cross-coupling products, the latter having a moderate optical purity (below 51%). The rhodium-and iridium-catalyzed reactions were very highly regioselective (regiospecific in the case of Ir), giving a branched product. In ionic liquids ([bmim][BF₄] and [bdmim][BF₄]) (bmim is 1-butyl-3-methylimidazolium and bdmim is 1-butyl-2,3-dimethylimidazolium), the Ir-catalyzed reaction regiospecifically afforded a branched product as a racemate. The same result was obtained with [Ir(COD)Cl]₂ as a catalyst; this reaction easily occurred in ionic liquids even without a base. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 519–521, March, 2007.     

Origin of Salt Effects in SN2 Fluorination Using KF Promoted by Ionic Liquids: Quantum Chemical Analysis

Quantum chemical analysis is presented, motivated by Grée and co-workers’ observation of salt effects [Adv. Synth. Catal. 2006, 348, 1149–1153] for S_N2 fluorination of KF in ionic liquids (ILs). We examine the relative promoting capacity of KF in [bmim]PF₆ vs. [bmim]Cl by comparing the activation barriers of the reaction in the two ILs. We also elucidate the origin of the experimentally observed additional rate acceleration in IL [bmim]PF₆ achieved by adding KPF₆. We find that the anion PF₆⁻ in the added salt acts as an extra Lewis base binding to the counter-cation K⁺ to alleviate the strong Coulomb attractive force on the nucleophile F⁻, decreasing the Gibbs free energy of activation as compared with that in its absence, which is in good agreement with experimental observations of rate enhancement. We also predict that using 2 eq. KF together with an eq. KPF₆ would further activate S_N2 fluorination     

ESR Studies on a Friedel‐Crafts Alkylation Reaction in [bmim]Cl‐AlCl3 Ionic Liquid

The paramagnetic complexes formed in Friedel‐Crafts alkylation reaction systems are invistigated by electron spin resonance (ESR) spectroscopy, in room temperature ionic liquids system 1‐butyl‐3‐methyl‐limidazolium chloride‐aluminium chloride ([bmim]Cl‐AlCl₃). The results indicate that ESR spectra observed are due to polycyclic aromatic radical cations formed from their parent hydrocarbons. ESR spectrum of spin adduct is obtained in an ionic liquid system composed of [bmim]Cl‐AlCl₃. In acidic solution the ¹⁴N hyperfine coupling constant of 4‐oxo‐TEMPO, 2.15 mT, is appreciably larger due to an adduct formed with AlCl₃.     

The physicochemical properties of some imidazolium-based ionic liquids and their binary mixtures

The density, viscosity and conductivity of ionic liquids (ILs), 1-octyl-3-methylimidazolium tetrafluoroborate ([omim][BF4]), 1-octyl-3-methylimidazolium chloride ([omim][Cl]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim] BF4]), 1-hexyl- 3-methylimidazolium chloride ([hmim][Cl]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF6]), and the [omim][BF4] + [omim][Cl], [hmim][BF4] + [hmim][Cl], and [hmim][PF6] + [hmim][Cl] binary mixtures were studied at dif- ferent temperatures. It was demonstrated that the densities of both the neat ILs and their mixtures varied linearly with temper- ature. The density sensitivity of a binary mixture is between those of the two components. The excess molar volumes (VE) of [hmim][BF4] + [hmim][Cl] and [hmim][PF6] + [hmim][Cl] mixtures are positive in the whole composition range. For [omim][BF4] + [omim][Cl], the VE is also positive in the [omim][Cl]-rich region, but is negative in the [omim][BF4]-rich re- gion. The viscosity or conductivity of a mixture is in the intermediate of those of the two neat ILs. For all the neat ILs and the binary mixtures studied, the order of conductivity is opposite to that of the viscosity. The Vogel-Tammann-Fulcher (VTF) equations can be used to fit the viscosity and conductivity of all the neat ILs and the binary mixtures. The neat ILs and their mixtures obey the Fractional Walden Rule very well, and the values of the Walden slopes are all smaller than unit, indicating obvious ion associations in the neat ILs and the binary mixtures.