Synthesis,structures, and conformational characteristics of calixarene monoanions and dianions

The synthesis, complete characterization, and solid state structural and solution conformation determination of calix[n]arenes (n = 4, 6, 8) is reported. A complete series of X-ray structures of the alkali metal salts of calix[4]arene (HC4) illustrate the great influence of the alkali metal ion on the solid state structure of calixanions (e.g., the Li salt of monoanionic HC4 is a monomer; the Na salt of monoanionic HC4 forms a dimer; and the K, Rb, and Cs salts exist in polymeric forms). Solution NMR spectra of alkali metal salts of monoanionic calix[4]arenes indicate that they have the cone conformation in solution. Variable-temperature NMR spectra of salts HC4.M (M = Li, Na, K, Rb, Cs) show that they possess similar coalescence temperatures, all higher than that of HC4. Due to steric hindrance from tert-butyl groups in the para position of p-tert-butylcalix[4]arene (Bu(t)C4), the alkali metal salts of monoanionic Bu(t)C4 exist in monomeric or dimeric form in the solid state. Calix[6]arene (HC6) and p-tert-butylcalix[6]arene (Bu(t)C6) were treated with a 2:1 molar ratio of M(2)CO(3) (M = K, Rb, Cs) or a 1:1 molar ratio of MOC(CH(3))(3) (M = Li, Na) to give calix[6]arene monoanions, but calix[6]arenes react in a 1:1 molar ratio with M(2)CO(3) (M = K, Rb, Cs) to afford calix[6]arene dianions. Calix[8]arene (HC8) and p-tert-butylcalix[8]arene (Bu(t)()C8) have similar reactivity. The alkali metal salts of monoanionic calix[6]arenes are more conformationally flexible than the alkali metal salts of dianionic calix[6]arenes, which has been shown by their solution NMR spectra. X-ray crystal structures of HC6.Li and HC6.Cs indicate that the size of the alkali metal has some influence on the conformation of calixanions; for example, HC6.Li has a cone-like conformation, and HC6.Cs has a 1,2,3-alternate conformation. The calix[6]arene dianions show roughly the same structural architecture, and the salts tend to form polymeric chains. For most calixarene salts cation-pi arene interactions were observed.     

Hydrogen-bonded dimers of tetra-urea calix[4]arenes stable in THF

[structure: see text]. Whereas tetra-urea derivatives of tetra-alkoxy calix[4]arenes 1 exist as single molecules in THF, dimeric hydrogen-bonded capsules are exclusively found for the corresponding calix[4]arene derivatives 3 and 2 with two or four free hydroxyl groups. Comparison with the rigidified tetra-urea 5 suggests that this increased stability of the dimers is due to the stabilization of their four-fold symmetry by intramolecular hydrogen bonds between the phenolic hydroxyl groups.     

Stepwise synthesis and selective dimerisation of bis- and trisloop tetra-urea calix[4]arenes

Tetra-urea calix[4]arenes substituted with four mono- or bisalkenyl residues have been converted into bis- or tetraloop compounds by intramolecular olefin metathesis, with use of a tetratosylurea calix[4]arene as template. The same strategy has now been used to synthesise trisloop compounds and bisloop compounds with adjacent loops, completing the series of the loop-containing tetra-urea derivatives. A tetra-urea calix[4]arene of the AABB type, where A stands for a bisalkenyl- and B for a monoalkenyl-substituted urea unit, was used as precursor for the three loops. It was easily synthesised from a tetraamino calix[4]arene in which two adjacent amino groups were Boc-protected. The ABCB-type precursor for the two adjacent loops was prepared through protection of two opposite amino functions with trityl groups. The capabilities of the novel macrocyclic tetra-ureas for the selective formation of hydrogen-bonded dimers were studied.     

Hydrogen bonding patterns of calix[4]arenes with thiourea functionalities in solution and in the solid state

[structure: see text] We have synthesized a number of calix[4]arene derivatives presenting thiourea functional groups at their upper rims by the condensation of a 1,3-di(p-amino)calix[4]arene with alkyl isothiocyanates. Mono- and dithiourea-substituted calix[4]arenes were prepared selectively in good yields, and homocoupling of the former led to calix[4]arene dimers with a thiourea linker. X-ray crystallography revealed interesting intra- and intermolecular hydrogen bonding patterns. (1)H NMR data and computational studies also provided some insight into the hydrogen bonding patterns.     

Self-assembled dendrimers with uniform structure

Calix[4]arenes substituted at their wide rim by four aryl urea residues (1) form hydrogen-bonded dimers in apolar solvents. Replacement of one urea residue by an acetamido moiety leads to calix[4]arene derivatives (5) which form hydrogen-bonded tetramers under the same conditions. Both self-assembly processes occur independently. Therefore, molecules have been prepared in which a tetra-urea calix[4]arene and a tri-urea mono acetamide derivative are covalently connected between their narrow rims by a long, mainly aliphatic chain [-O-(CH(2))(n)-C(O)-NH-(CH(2))(m)-O-] (7). In the presence of an equimolar amount of tetra-tosyl urea calix[4]arene () they form dendritic assemblies since the well known heterodimerization of tetra-tosyl and tetra-aryl urea calix[4]arenes prevents the formation of a cross-linked structure. Covalent connection of adjacent urea residues leads to tetra-loop derivatives (3) that cannot form homodimers, but instead form heterodimers with tetra-aryl or tetra-tosylureas. Therefore, similar dendrimers should be available using the selective dimerization observed for 3. The formation of a single, structurally uniform dendrimer from eight building blocks is confirmed by (1)H NMR spectra, showing only peaks that are also found for respective model assemblies. Translational diffusion coefficients of the assemblies have been determined using (1)H DOSY NMR.     

Calix[4]arene-based bis[2]catenanes: synthesis and chiral resolution

The exclusive formation of hydrogen-bonded dimers between tetraaryl and tetratosylurea calix[4]arenes has been used to prepare a series of ten "bisloop" tetraurea calix[4]arenes 3, in which adjacent phenylurea groups are covalently linked through alpha,omega-dioxyalkane chains. This dimerization with tetratosylurea 2 as template preorganizes the alkenyl residues of tetra(m-alkenyloxyphenyl) ureas 1 and enables their selective connection in high yield (up to 95 %) by olefin metathesis followed by hydrogenation. The "bisloop" calixarenes 3 also exclusively form heterodimers with 1. Thus, in a separated metathesis/hydrogenation sequence, a series of 14 cyclic bis[2]catenanes 4, in which two calix[4]arenes are connected through their wide rims by two pairs of interlocked rings (total size 29 to 41 atoms), were prepared in yields of up to 97 %. Optical resolution of these chiral bis[2]catenanes was studied by HPLC on chiral stationary phases. The single-crystal X-ray structure of one example (4(P,10)) confirmed the interlocking rings and revealed that the hydrogen-bonded dimeric capsule of the calix[4]arene can be "completely" opened.     

Exchange coupling mediated through-bonds and through-space in conformationally constrained polyradical scaffolds: calix[4]arene nitroxide tetraradicals and diradical

Calix[4]arenes constrained to the 1,3-alternate conformation and functionalized at the upper rim with four and two tert-butylnitroxides have been synthesized and characterized by X-ray crystallography, magnetic resonance (EPR and (1)H NMR) spectroscopy, and magnetic studies. The 1,3-alternate nitroxide tetraradical and diradical provide unique polyradical scaffolds for dissection of the through-bond and through-space intramolecular exchange couplings. In addition, detailed magnetic studies of the previously reported calix[4]arene nitroxide tetraradical, which possesses cone conformation in solution, reveal conformational dependence of exchange coupling. Through-bond coupling between the adjacent nitroxide radicals is mediated by the nitroxide-m-phenylene-CH(2)-m-phenylene-nitroxide coupling pathway, and through-space coupling is found between the diagonal nitroxide radicals at the conformationally constrained N...N distance of 5-6 A. Magnetic studies of the calix[4]arene polyradical scaffolds in frozen solutions show that the through-bond exchange coupling in the 1,3-alternate calix[4]arene tetraradical is antiferromagnetic, while that in cone calix[4]arene tetraradical is ferromagnetic. The through-space exchange couplings are antiferromagnetic in both cone and 1,3-alternate calix[4]arene tetraradical, as well as in the 1,3-alternate calix[4]arene diradical. The exchange coupling constants (|J/k|) are of the order of 1 K.     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.     

QCM 表面自组装胱氨酸1，3－桥连杯[4]芳烃膜用于识别气相丁胺

Two cystine-bearing 1,3-bridged calix[4]arenes were used as the coatings of the quartz crystal microbalance (QCM) with gold electrodes. The two calix[4]arene derivatives were self-assembled onto the gold electrode surface by the covalent attachment between the di-sulfur and gold. The compound of cystine-bearing bi-phenylalanine 1,3-bridged calix[4]arene (CPC) with longer alkyl chain had better self-assembled capacity onto the fresh surfaces of gold electrode than that of cystine-bearing 1,3-bridged calix[4]arene (CC) with comparably shorter alkyl chain.The modified QCM sensors were used to recognize the butylamine isomers in gas. The results showed that the QCM coated with both compounds had preferential affinity to n-butylamine, then i-butylamine, t-butylamine in the range of low concentrations, indicating that in the recognition process, the steric hindrance effect played an important role when forming complex with guest molecules. When the concentrations of the analytes were increased, the polarity and the magnetism of the butylamine became determinative factors. The reversibility was improved greatly and the equilibrium time was much shorter on the self-assembled film than on the film obtained by dropping coating.     

1,3-Alternate calix[4]arene nitronyl nitroxide tetraradical and diradical: synthesis, X-ray crystallography, paramagnetic NMR spectroscopy, EPR spectroscopy, and magnetic studies

Calix[4]arenes constrained to 1,3-alternate conformation and functionalized at the upper rim with four and two nitronyl nitroxides have been synthesized, and characterized by X-ray crystallography, magnetic resonance (EPR and ¹H NMR) spectroscopy, and magnetic studies. Such calix[4]arene tetraradicals and diradicals provide scaffolds for through-bond and through-space intramolecular exchange couplings.     

A paradigm shift in the construction of heterobimetallic complexes: synthesis of group 2 & 4 metal-calix[6]arene complexes

Deprotonation of calix[6]arenes with barium in methanol followed by the addition of [Ti(OPr(i))(4)] or [Zr(OBu(n))(4)] is effective in the formation of novel dimeric 2:1 barium-titanium(IV)/zirconium(IV) calix[6]arene complexes. In these complexes a central Ti(IV)/Zr(IV) coordinated in the exo-position connects the two calix[6]arenes in the 1,3-alternate conformation, each with an endo-barium sharing common phenolate groups with the titanium/zirconium centre and participating in cation-pi interactions. A homometallic barium calix[6]arene dimer was also prepared wherein the calix[6]arenes are in the 1,3-alternate conformation with each coordinating one endo- and one exo-barium centre. The exo-barium cations connect the two calix[6]arenes through bridging methanol ligands. In this and the heterometallic complexes, cation-pi complexation of the Ba(2+) ion within the 1,3 alternate conformation of calix[6]arene facilitates the formation of the dimeric complexes in methanol. In contrast, the smaller Sr(2+) ion did not form similar complexes in methanol, and the formation of an analogous 2:1 strontium-titanium calixarene complex required the use of the more sterically demanding donor alcohol, isopropanol, the resulting complex being devoid of cation-pi interaction. The results show (i) that a subtle interplay of solvation strength, coordination array type and cavity/cation size influences the accessibility of heterobimetallic complexes based on calix[6]arenes, and (ii) a synergistic endo-exo binding behaviour.     

New artificial receptors from selectively functionalized calix[4]arenes

Abstract

The development of new synthetic methods for the monoalkylation of calix[4]arenes at the lower rim allows the synthesis of a new class of trihydroxamate siderophores. Three chelating hydroxamic acid units are introduced through a sequence of reactions which blocks the macrocycle in the cone conformation. The new ligands obtained form neutral 1:1 complexes (FeL) with iron (III), which are stable in EtOH/H₂O 9:1 at pH 2–7. Calix[4]arene bis-crown ethers are prepared by exploiting the selective 1,2-(proximal) functionalization of calix[4]arenes at the lower rim. These ligands are, however, less effective in complexing alkali metal cations compared with the 1,3-calix[4]arene crown-ethers which, in their partial cone structure, offer a better shielding for the complexed cations. Rigid upper rim-bridged calix[4]arenes potentially useful for the inclusion of neutral molecules are prepared by exploiting the selective 1,3-diformylation of calix[4]arene at the upper rim. Finally a new chloromethylation method for calix[4]arenes blocked in the cone conformation is described together with the synthesis of new cavitands.     

Synthesis of Macrocyclic Lactones Building on Double Calix[4]arenes

Naturalmacrocycliclactonesandlactamsastheionophoreshaveabsorbedextensiveinterestsbecauseoftheirveryhighselectiverecognitionforalkalimetals.rorexample,nactinslandvalinomycin'havethehighestselectivityforpotassiumamongalltheionopohores.Artificialmacrocycliclactonesalsoshowedselectivityforcanons,althoughthebindingstrengthwaslowerthanthatofcommoncrownethers3.Calixareneswereaveryimportantkindofartificialreceptors,whosederivativeshaveshowedthehighestselectivityforNa ,K andCs amongthesynthesizedmacro…     

Regioselective O-substitution of p-tert-butylcalix[7]arene

[structure: see text]. The first examples of selectively functionalized calix[7]arenes have been obtained by weak-base promoted O-alkylation or O-benzoylation of p-tert-butylcalix[7]arene. Mono-, 1,3- and 1,4-disubstituted calix[7]arenes have been obtained in workable yields, while the 1,2,4,6-tetrasubstitution was achieved with surprisingly high selectivity (50-88% yield) by using K2CO3 as base. A rationale for this finding is proposed.     

DNA condensation and cell transfection properties of guanidinium calixarenes: dependence on macrocycle lipophilicity, size, and conformation

Calix[n]arenes functionalized with guanidinium groups at the upper rim and alkyl chains at the lower rim bind to DNA, condense it, and in some cases, promote cell transfection depending on their structure and lipophilicity. Atomic force microscopy (AFM) studies indicate that upon DNA binding the hydrophobic association of the lipophilic chains of cone guanidinium calix[4]arenes drives the formation of intramolecular DNA condensates, characterized by DNA loops emerging from a dense core. Furthermore, hexyl and octyl chains confer to these calixarenes cell transfection capabilities. Conversely, larger and conformationally mobile calix[6]- and calix[8]arene methoxy derivatives form intermolecular aggregates characterized by "gorgonlike" structures composed of multiple plectomenes. These adducts, in which interstrand connections are dominated by electrostatic interactions, fail to promote cell transfection. Finally, calix[4]arenes in a 1,3-alternate conformation show an intermediate behavior because they condense DNA, but the process is driven by charge-charge interactions.     

新型偶氮杯[4]芳烃的合成与构象研究

使用相应的w-硫醚羧酸酰氯与杯[4]芳烃或者偶氮杯[4]芳烃酰化合成了一类新型的杯[4]芳烃衍生物。分离得到六个新化合物4a-4c和5a-5c，并使用MALDI, EA, ¹H和¹³C NMR进行了表征。NMR图谱表明偶氮杯[4]芳烃衍生物 5a-5c均为1,3-转换构型，而4a-4c则均为锥式构型。对偶氮杯[4]芳烃衍生物5a-5c的红外和紫外性质也进行了研究。     

Alkali-metalated forms of thiacalix[4]arenes

The alkali metal salts [TCALi4] (1), [TCANa4] (2), and [TCALK4] (3) of fully deprotonated p-tert-butyltetrathiacalix[4]arene (H(4)TCA) are readily available from the reactions of thiacalix[4]arene and n-BuLi, NaH, or KH as deprotonating reagents. Crystals of the sodium salts 2 and the potassium salt 3 suitable for X-ray diffraction were obtained in the form of the pyridine solvates [(TCA)2Na8.8py] (2.8py) and [(TCA)2K(8).8py] (3.8py). These molecules are dimers in the solid state but are structurally not related. In addition, the reaction of H(4)TCA and lithium hydroxide afforded the structurally characterized complex [(TCA)Li5(OH).4THF] (4). The molecular structure of 4 as well as the structures of 2.8py and 3.8py reveal a close relationship to the corresponding alkali metal salts of the calix[4]arenes.     

Synthesis and metal ion complexation studies of proton-ionizable calix

A series of novel N-chromogenic calix[4]arene azacrown ethers were synthesized as selective extractants of potassium ion. 1,3-Alternate calix[4]arene azacrown ethers were prepared by reacting 25,27-dipropyloxy-26,28-bis(5-chloro-3-oxapentyloxy) calix[4]arenes with p-toluenesulfonamide in the presence of potassium carbonate. The coupling reaction of calix[4]arene azacrown ether with 2-hydroxy-5-nitrobenzyl bromide in the presence of triethylamine in THF gave the chromogenic calix[4]arene azacrown ether in moderate yield. These compounds show high potassium selectivity over other metal ions as shown by two-phase extraction, bulk liquid membrane, and 1H NMR studies on a ligand-metal complex. It is assumed that the OH of the chromogenic group attached on nitrogen can assist the complexation by encapsulation of the metal.     

Synthesis and structures of an unusual germanium(II) calix[4]arene complex and the first germanium(II) calix[8]arene complex and their reactivity with diiron nonacarbonyl

The protonolysis reaction of the germanium(II) amide Ge[N(SiMe3)2]2 with calix[4]arene and calix[8]arene furnishes the two germanium(II) calixarene complexes {calix[4]}Ge2 and {calix[8]}Ge4, respectively, which have been crystallographically characterized. The calix[4]arene complex contains a Ge2O2 rhombus at the center of the molecule and is one of the only four germanium(II) calix[4]arenes that have been structurally characterized. The calix[8]arene species is the first reported germanium calix[8]arene complex, and it exhibits an overall bowl-shaped structure which contains two Ge2O2 fragments. The latter complex reacts with Fe2(CO)9 to yield an octairon compound, which has also been structurally characterized and contains four GeFe2 triangles arranged around the macrocyclic ring. The germanium(II) centers are oxidized to germanium(IV) in this process, with concomitant reduction of the neutral diiron species to Fe2(CO)(8)2- anions.     

Direct access to upper rim substituted mono- and diaryloxy calix[4]arenes via bis(spirodienone) route

A seemingly ipso-like nucleophilic substitution of the upper rim of p-tert-butylcalix[4]arene is accomplished by an indirect method involving calix[4]arene derived bis(spirodienone). This method not only provides both mono and 1,3-diaryloxy calixarenes but also enables the synthesis of upper rim monothio substituted calix[4]arenes. A modification of the methodology can be successfully extended for the selective synthesis of mono- and 1,3-diquinone calix[4]arenes having free hydroxyl groups at the lower rim, in fewer steps.